| Message ID | 8739jhs2hv.fsf@ti.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Delegated to: | Kevin Hilman |
| Headers | show |
On Fri, 10 Jun 2011, Kevin Hilman wrote: > So here's an interesting scenario which I think it triggers the same > problem as you highlight above. > > Assume you have a driver that's using runtime PM on a per-xfer basis. > Before each xfer, it does a pm_runtime_get_sync(), after each xfer it > does a pm_runtime_put_sync() (for this example, it's important that it's > a _put_sync()). The _put_sync() might happen in an ISR, or possibly in > a thread waiting on a completion which is awoken by the ISR, etc. etc. > (the runtime PM callbacks are IRQ safe, and device is marked as such.) > > The driver is in the middle of an xfer and a system suspend request > happens. > > The driver's ->suspend() callback happens, and the driver > > - enables/disables wakeups based on device_may_wakeup() > - prevents future xfers > - waits for current xfer to finish > > As soon as the xfer finishes, the driver gets notified (completion, > callback, IRQ, whatever) and calls pm_runtime_put_sync(), which triggers > subsys->runtime_suspend --> driver->runtime_suspend. > > While the driver's ->suspend() callback doesn't directly call > pm_runtime_put_sync(), the act of waiting for the xfer to finish > causes the subsystem/driver->runtime_suspend callbacks to be called > during the subsytem/driver->suspend callback, which is the same problem > as you highlight above. > > Based on your commit that removed incrementing the usage count across > suspend[1], you mentioned "we can rely on subsystems and device drivers > to avoid doing that unnecessarily." The above example shows that this > type of thing might not be that obvious to detect and thus avoid. As with so many other things, this depends entirely on how the subsystem and driver are designed. If they are written to allow this sort of thing and handle it properly, there's no problem. Nothing in the PM core itself cares whether the runtime PM routines are invoked during system sleep. > I suspect the solution to the above will be to add back the usage count > increment across system suspend, but I'm hoping not. IMO, it would be > more flexible to allow the subsystems to decide. The subsystems could > provide locking (or manage dev->power.usage_count) themselves if > necessary. For example, leave it to the subsystem->prepare() to > pm_runtime_get_noresume() if it wants to avoid the "nesting" of > callbacks. Exactly. > A related question: does the pm_wq need to be freezable? From > Documentation/power/runtime_pm.txt: > > * The power management workqueue pm_wq in which bus types and device drivers can > put their PM-related work items. It is strongly recommended that pm_wq be > used for queuing all work items related to run-time PM, because this allows > them to be synchronized with system-wide power transitions (suspend to RAM, > hibernation and resume from system sleep states). pm_wq is declared in > include/linux/pm_runtime.h and defined in kernel/power/main.c. > > Is "synchronized with system-wide power transistions" correct here? > Rather than synchronize, using a freezable workqueue actually _prevents_ > runtime PM events (at least async ones.) Which prevents races -- the goal of synchronization. If you use pm_wq for your asynchronous runtime PM events, you never have to worry about one of them occurring in the middle of a system sleep transition. > Again, proper locking (or management of dev->power.usage_count) at the > subsystem level would get you the same effect, but still leave > flexibility to the subsystem/pwr_domain layer. I'm not so sure about that. For example, how would you prevent an async resume from interfering with a system suspend? > Kevin > > P.S. the commit below[1] removed the usage count increment/decrement > across system suspend/resume, but Documentation/power/runtime_pm.txt > still refers to it. Patch below[2] removes it, ssuming you're > not planning on adding it back. ;) ... > diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt > index 654097b..22accb3 100644 > --- a/Documentation/power/runtime_pm.txt > +++ b/Documentation/power/runtime_pm.txt > @@ -566,11 +566,6 @@ to do this is: > pm_runtime_set_active(dev); > pm_runtime_enable(dev); > > -The PM core always increments the run-time usage counter before calling the > -->prepare() callback and decrements it after calling the ->complete() callback. > -Hence disabling run-time PM temporarily like this will not cause any run-time > -suspend callbacks to be lost. > - Thank you for pointing this out. I had forgotten about this; it implies that temporarily disabling runtime PM during system resume is no longer safe! Maybe we should put the get_noresume and put_sync calls back into the PM core, but only during the system resume stages. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Saturday, June 11, 2011, Kevin Hilman wrote: > "Rafael J. Wysocki" <rjw@sisk.pl> writes: > > [...] > > > Whether or not user space has disabled runtime PM _doesn't_ _matter_ for > > system suspend, because _you_ _can't_ call pm_runtime_suspend(), or > > pm_runtime_put_sunc(), from a driver's .suspend() callback _anyway_. > > The reason is that doing that would cause the subsystem's (or power > > domain's in this case) .runtime_suspend() callback to be invoked and > > that's incorrect. Namely, it would require the subsystem (power domain) > > to expect that its .runtime_suspend() would always be executed indirectly > > as a result of calling its .suspend() (through the driver's callback) > > and that expectation may or may not be met (depending on the driver's > > design). > > So here's an interesting scenario which I think it triggers the same > problem as you highlight above. > > Assume you have a driver that's using runtime PM on a per-xfer basis. > Before each xfer, it does a pm_runtime_get_sync(), after each xfer it > does a pm_runtime_put_sync() (for this example, it's important that it's > a _put_sync()). The _put_sync() might happen in an ISR, It can't happen in an ISR, to be precise. > or possibly in a thread waiting on a completion which is awoken by the ISR, > etc. etc. (the runtime PM callbacks are IRQ safe, and device is marked as such.) > > The driver is in the middle of an xfer and a system suspend request > happens. > > The driver's ->suspend() callback happens, and the driver > > - enables/disables wakeups based on device_may_wakeup() > - prevents future xfers > - waits for current xfer to finish > > As soon as the xfer finishes, the driver gets notified (completion, > callback, IRQ, whatever) and calls pm_runtime_put_sync(), which triggers > subsys->runtime_suspend --> driver->runtime_suspend. > > While the driver's ->suspend() callback doesn't directly call > pm_runtime_put_sync(), the act of waiting for the xfer to finish > causes the subsystem/driver->runtime_suspend callbacks to be called > during the subsytem/driver->suspend callback, which is the same problem > as you highlight above. It's not exactly the same. The difference is that you're talking about race conditions between runtime PM and system suspend (I kind of know why I wanted system suspend to block runtime PM now :-)) that may be prevented by subsystem-level code from happening (by using locking and some flags etc.), while that code cannot do much if its .runtime_suspend() callback, for example, is executed directly from the system suspend code path. > Based on your commit that removed incrementing the usage count across > suspend[1], you mentioned "we can rely on subsystems and device drivers > to avoid doing that unnecessarily." The above example shows that this > type of thing might not be that obvious to detect and thus avoid. > > I suspect the solution to the above will be to add back the usage count > increment across system suspend, but I'm hoping not. IMO, it would be > more flexible to allow the subsystems to decide. The subsystems could > provide locking (or manage dev->power.usage_count) themselves if > necessary. For example, leave it to the subsystem->prepare() to > pm_runtime_get_noresume() if it wants to avoid the "nesting" of > callbacks. I agree. > A related question: does the pm_wq need to be freezable? From > Documentation/power/runtime_pm.txt: > > * The power management workqueue pm_wq in which bus types and device drivers can > put their PM-related work items. It is strongly recommended that pm_wq be > used for queuing all work items related to run-time PM, because this allows > them to be synchronized with system-wide power transitions (suspend to RAM, > hibernation and resume from system sleep states). pm_wq is declared in > include/linux/pm_runtime.h and defined in kernel/power/main.c. > > Is "synchronized with system-wide power transistions" correct here? > Rather than synchronize, using a freezable workqueue actually _prevents_ > runtime PM events (at least async ones.) > > Again, proper locking (or management of dev->power.usage_count) at the > subsystem level would get you the same effect, but still leave > flexibility to the subsystem/pwr_domain layer. No, please. The problem here is that I don't want runtime PM stuff to be called during the "noirq" stages of system suspend and resume which the freezing of the workqueue takes care of nicely. > P.S. the commit below[1] removed the usage count increment/decrement > across system suspend/resume, but Documentation/power/runtime_pm.txt > still refers to it. Patch below[2] removes it, ssuming you're > not planning on adding it back. ;) No, I'm not. In fact, I'm going to apply your patch. :-) Thanks, Rafael > [1] > commit e8665002477f0278f84f898145b1f141ba26ee26 > Author: Rafael J. Wysocki <rjw@sisk.pl> > Date: Sat Feb 12 01:42:41 2011 +0100 > > PM: Allow pm_runtime_suspend() to succeed during system suspend > > The dpm_prepare() function increments the runtime PM reference > counters of all devices to prevent pm_runtime_suspend() from > executing subsystem-level callbacks. However, this was supposed to > guard against a specific race condition that cannot happen, because > the power management workqueue is freezable, so pm_runtime_suspend() > can only be called synchronously during system suspend and we can > rely on subsystems and device drivers to avoid doing that > unnecessarily. > > Make dpm_prepare() drop the runtime PM reference to each device > after making sure that runtime resume is not pending for it. > > Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> > Acked-by: Kevin Hilman <khilman@ti.com> > > [2] > From 8968e3e41d785e7e5ce7584d64f6a55b303e7060 Mon Sep 17 00:00:00 2001 > From: Kevin Hilman <khilman@ti.com> > Date: Fri, 10 Jun 2011 16:05:51 -0700 > Subject: [PATCH] PM / Runtime: update doc: usage count no longer incremented across system PM > > commit e8665002477f0278f84f898145b1f141ba26ee26 (PM: Allow > pm_runtime_suspend() to succeed during system suspend) removed usage > count increment across system PM. > > Update doc to reflect this. > > Signed-off-by: Kevin Hilman <khilman@ti.com> > --- > Applies on v3.0-rc2 > > Documentation/power/runtime_pm.txt | 5 ----- > 1 files changed, 0 insertions(+), 5 deletions(-) > > diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt > index 654097b..22accb3 100644 > --- a/Documentation/power/runtime_pm.txt > +++ b/Documentation/power/runtime_pm.txt > @@ -566,11 +566,6 @@ to do this is: > pm_runtime_set_active(dev); > pm_runtime_enable(dev); > > -The PM core always increments the run-time usage counter before calling the > -->prepare() callback and decrements it after calling the ->complete() callback. > -Hence disabling run-time PM temporarily like this will not cause any run-time > -suspend callbacks to be lost. > - > 7. Generic subsystem callbacks > > Subsystems may wish to conserve code space by using the set of generic power > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 654097b..22accb3 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -566,11 +566,6 @@ to do this is: pm_runtime_set_active(dev); pm_runtime_enable(dev); -The PM core always increments the run-time usage counter before calling the -->prepare() callback and decrements it after calling the ->complete() callback. -Hence disabling run-time PM temporarily like this will not cause any run-time -suspend callbacks to be lost. - 7. Generic subsystem callbacks Subsystems may wish to conserve code space by using the set of generic power