From patchwork Thu Dec 3 16:20:13 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Walmsley X-Patchwork-Id: 64571 X-Patchwork-Delegate: paul@pwsan.com Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id nB3GKL0s026695 for ; Thu, 3 Dec 2009 16:20:21 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754314AbZLCQUN (ORCPT ); Thu, 3 Dec 2009 11:20:13 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754338AbZLCQUN (ORCPT ); Thu, 3 Dec 2009 11:20:13 -0500 Received: from utopia.booyaka.com ([72.9.107.138]:56048 "EHLO utopia.booyaka.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754272AbZLCQUH (ORCPT ); Thu, 3 Dec 2009 11:20:07 -0500 Received: (qmail 6754 invoked by uid 526); 3 Dec 2009 16:20:13 -0000 Date: Thu, 3 Dec 2009 09:20:13 -0700 (MST) From: Paul Walmsley To: Russell King - ARM Linux cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Nishanth Menon , Felipe Balbi Subject: [PATCH v3 8/8] OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c In-Reply-To: Message-ID: References: <20091203095830.1203.76290.stgit@localhost.localdomain> <20091203100707.1203.98247.stgit@localhost.localdomain> <20091203102700.GA30423@flint.arm.linux.org.uk> <20091203104354.GB20379@n2100.arm.linux.org.uk> <20091203121157.GC20379@n2100.arm.linux.org.uk> <20091203150300.GB26651@n2100.arm.linux.org.uk> User-Agent: Alpine 2.00 (DEB 1167 2008-08-23) MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 87e539a..ceced8f 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o +obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o +obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 26a887c..36393d1 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock.c * - * Copyright (C) 2004 - 2005 Nokia corporation + * Copyright (C) 2004 - 2005, 2009 Nokia corporation * Written by Tuukka Tikkanen * * Modified to use omap shared clock framework by @@ -26,12 +26,17 @@ #include #include #include - -static const struct clkops clkops_generic; -static const struct clkops clkops_uart; -static const struct clkops clkops_dspck; +#include #include "clock.h" +#include "opp.h" + +__u32 arm_idlect1_mask; +struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; + +/*------------------------------------------------------------------------- + * Omap1 specific clock functions + *-------------------------------------------------------------------------*/ static int clk_omap1_dummy_enable(struct clk *clk) { @@ -42,134 +47,24 @@ static void clk_omap1_dummy_disable(struct clk *clk) { } -static const struct clkops clkops_dummy = { - .enable = clk_omap1_dummy_enable, - .disable = clk_omap1_dummy_disable, -}; - -static struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_dummy, - .flags = RATE_FIXED, -}; - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; +const struct clkops clkops_dummy = { + .enable = clk_omap1_dummy_enable, + .disable = clk_omap1_dummy_disable, }; -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) - -static struct omap_clk omap_clks[] = { - /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), - /* CK_GEN1 clocks */ - CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), - CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), - CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), - CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), - /* CK_GEN2 clocks */ - CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), - /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), - CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), - CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), - CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), - CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), - CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), - CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), - CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), - /* ULPD clocks */ - CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), - CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), - CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), - CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), - CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), - CLK(NULL, "mclk", &mclk_16xx, CK_16XX), - CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), - CLK(NULL, "bclk", &bclk_16xx, CK_16XX), - CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), - CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), - CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), - CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), - /* Virtual clocks */ - CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), - CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), -}; - -static int omap1_clk_enable_generic(struct clk * clk); -static int omap1_clk_enable(struct clk *clk); -static void omap1_clk_disable_generic(struct clk * clk); -static void omap1_clk_disable(struct clk *clk); - -__u32 arm_idlect1_mask; - -/*------------------------------------------------------------------------- - * Omap1 specific clock functions - *-------------------------------------------------------------------------*/ - -static unsigned long omap1_watchdog_recalc(struct clk *clk) +/* XXX can be replaced with a fixed_divisor_recalc */ +unsigned long omap1_watchdog_recalc(struct clk *clk) { return clk->parent->rate / 14; } -static unsigned long omap1_uart_recalc(struct clk *clk) +unsigned long omap1_uart_recalc(struct clk *clk) { unsigned int val = __raw_readl(clk->enable_reg); return val & clk->enable_bit ? 48000000 : 12000000; } -static unsigned long omap1_sossi_recalc(struct clk *clk) +unsigned long omap1_sossi_recalc(struct clk *clk) { u32 div = omap_readl(MOD_CONF_CTRL_1); @@ -179,64 +74,6 @@ static unsigned long omap1_sossi_recalc(struct clk *clk) return clk->parent->rate / div; } -static int omap1_clk_enable_dsp_domain(struct clk *clk) -{ - int retval; - - retval = omap1_clk_enable(&api_ck.clk); - if (!retval) { - retval = omap1_clk_enable_generic(clk); - omap1_clk_disable(&api_ck.clk); - } - - return retval; -} - -static void omap1_clk_disable_dsp_domain(struct clk *clk) -{ - if (omap1_clk_enable(&api_ck.clk) == 0) { - omap1_clk_disable_generic(clk); - omap1_clk_disable(&api_ck.clk); - } -} - -static const struct clkops clkops_dspck = { - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, -}; - -static int omap1_clk_enable_uart_functional(struct clk *clk) -{ - int ret; - struct uart_clk *uclk; - - ret = omap1_clk_enable_generic(clk); - if (ret == 0) { - /* Set smart idle acknowledgement mode */ - uclk = (struct uart_clk *)clk; - omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, - uclk->sysc_addr); - } - - return ret; -} - -static void omap1_clk_disable_uart_functional(struct clk *clk) -{ - struct uart_clk *uclk; - - /* Set force idle acknowledgement mode */ - uclk = (struct uart_clk *)clk; - omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); - - omap1_clk_disable_generic(clk); -} - -static const struct clkops clkops_uart = { - .enable = &omap1_clk_enable_uart_functional, - .disable = &omap1_clk_disable_uart_functional, -}; - static void omap1_clk_allow_idle(struct clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -344,7 +181,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return dsor_exp; } -static unsigned long omap1_ckctl_recalc(struct clk *clk) +unsigned long omap1_ckctl_recalc(struct clk *clk) { /* Calculate divisor encoded as 2-bit exponent */ int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); @@ -352,7 +189,7 @@ static unsigned long omap1_ckctl_recalc(struct clk *clk) return clk->parent->rate / dsor; } -static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) +unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) { int dsor; @@ -363,25 +200,29 @@ static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) * Note that DSP_CKCTL virt addr = phys addr, so * we must use __raw_readw() instead of omap_readw(). */ - omap1_clk_enable(&api_ck.clk); + omap1_clk_enable(api_ck_p); dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); - omap1_clk_disable(&api_ck.clk); + omap1_clk_disable(api_ck_p); return clk->parent->rate / dsor; } /* MPU virtual clock functions */ -static int omap1_select_table_rate(struct clk * clk, unsigned long rate) +int omap1_select_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate and switch to it */ struct mpu_rate * ptr; + unsigned long dpll1_rate, ref_rate; - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) + dpll1_rate = clk_get_rate(ck_dpll1_p); + ref_rate = clk_get_rate(ck_ref_p); + + for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ref_rate) continue; /* DPLL1 cannot be reprogrammed without risking system crash */ - if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) + if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate) continue; /* Can check only after xtal frequency check */ @@ -402,11 +243,13 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) else omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); - ck_dpll1.rate = ptr->pll_rate; + /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ + ck_dpll1_p->rate = ptr->pll_rate; + return 0; } -static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) { int dsor_exp; u16 regval; @@ -426,7 +269,7 @@ static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) return 0; } -static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) +long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) { int dsor_exp = calc_dsor_exp(clk, rate); if (dsor_exp < 0) @@ -436,7 +279,7 @@ static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) return clk->parent->rate / (1 << dsor_exp); } -static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) { int dsor_exp; u16 regval; @@ -456,16 +299,19 @@ static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) return 0; } -static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate) +long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate */ struct mpu_rate * ptr; - long highest_rate; + long highest_rate; + unsigned long ref_rate; + + ref_rate = clk_get_rate(ck_ref_p); highest_rate = -EINVAL; - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) + for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ref_rate) continue; highest_rate = ptr->rate; @@ -500,8 +346,8 @@ static unsigned calc_ext_dsor(unsigned long rate) return dsor; } -/* Only needed on 1510 */ -static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) +/* XXX Only needed on 1510 */ +int omap1_set_uart_rate(struct clk *clk, unsigned long rate) { unsigned int val; @@ -519,7 +365,7 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) } /* External clock (MCLK & BCLK) functions */ -static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) +int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) { unsigned dsor; __u16 ratio_bits; @@ -537,7 +383,7 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) return 0; } -static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) +int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) { u32 l; int div; @@ -560,12 +406,12 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) return 0; } -static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate) +long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate) { return 96000000 / calc_ext_dsor(rate); } -static void omap1_init_ext_clk(struct clk * clk) +void omap1_init_ext_clk(struct clk *clk) { unsigned dsor; __u16 ratio_bits; @@ -583,7 +429,7 @@ static void omap1_init_ext_clk(struct clk * clk) clk-> rate = 96000000 / dsor; } -static int omap1_clk_enable(struct clk *clk) +int omap1_clk_enable(struct clk *clk) { int ret = 0; @@ -611,7 +457,7 @@ err: return ret; } -static void omap1_clk_disable(struct clk *clk) +void omap1_clk_disable(struct clk *clk) { if (clk->usecount > 0 && !(--clk->usecount)) { clk->ops->disable(clk); @@ -666,12 +512,70 @@ static void omap1_clk_disable_generic(struct clk *clk) } } -static const struct clkops clkops_generic = { - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, +const struct clkops clkops_generic = { + .enable = omap1_clk_enable_generic, + .disable = omap1_clk_disable_generic, }; -static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) +static int omap1_clk_enable_dsp_domain(struct clk *clk) +{ + int retval; + + retval = omap1_clk_enable(api_ck_p); + if (!retval) { + retval = omap1_clk_enable_generic(clk); + omap1_clk_disable(api_ck_p); + } + + return retval; +} + +static void omap1_clk_disable_dsp_domain(struct clk *clk) +{ + if (omap1_clk_enable(api_ck_p) == 0) { + omap1_clk_disable_generic(clk); + omap1_clk_disable(api_ck_p); + } +} + +const struct clkops clkops_dspck = { + .enable = omap1_clk_enable_dsp_domain, + .disable = omap1_clk_disable_dsp_domain, +}; + +static int omap1_clk_enable_uart_functional(struct clk *clk) +{ + int ret; + struct uart_clk *uclk; + + ret = omap1_clk_enable_generic(clk); + if (ret == 0) { + /* Set smart idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, + uclk->sysc_addr); + } + + return ret; +} + +static void omap1_clk_disable_uart_functional(struct clk *clk) +{ + struct uart_clk *uclk; + + /* Set force idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); + + omap1_clk_disable_generic(clk); +} + +const struct clkops clkops_uart = { + .enable = omap1_clk_enable_uart_functional, + .disable = omap1_clk_disable_uart_functional, +}; + +long omap1_clk_round_rate(struct clk *clk, unsigned long rate) { if (clk->flags & RATE_FIXED) return clk->rate; @@ -682,7 +586,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) return clk->rate; } -static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EINVAL; @@ -697,7 +601,7 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) #ifdef CONFIG_OMAP_RESET_CLOCKS -static void __init omap1_clk_disable_unused(struct clk *clk) +void __init omap1_clk_disable_unused(struct clk *clk) { __u32 regval32; @@ -726,165 +630,3 @@ static void __init omap1_clk_disable_unused(struct clk *clk) #else #define omap1_clk_disable_unused NULL #endif - -static struct clk_functions omap1_clk_functions = { - .clk_enable = omap1_clk_enable, - .clk_disable = omap1_clk_disable, - .clk_round_rate = omap1_clk_round_rate, - .clk_set_rate = omap1_clk_set_rate, - .clk_disable_unused = omap1_clk_disable_unused, -}; - -int __init omap1_clk_init(void) -{ - struct omap_clk *c; - const struct omap_clock_config *info; - int crystal_type = 0; /* Default 12 MHz */ - u32 reg, cpu_mask; - -#ifdef CONFIG_DEBUG_LL - /* Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. - */ - omap_writel(0x3 << 29, MOD_CONF_CTRL_0); -#endif - - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - reg = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(reg, SOFT_REQ_REG); - if (!cpu_is_omap15xx()) - omap_writew(0, SOFT_REQ_REG2); - - clk_init(&omap1_clk_functions); - - /* By default all idlect1 clocks are allowed to idle */ - arm_idlect1_mask = ~0; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_preinit(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap16xx()) - cpu_mask |= CK_16XX; - if (cpu_is_omap1510()) - cpu_mask |= CK_1510; - if (cpu_is_omap7xx()) - cpu_mask |= CK_7XX; - if (cpu_is_omap310()) - cpu_mask |= CK_310; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - } - - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap15xx()) - crystal_type = info->system_clock_type; - } - -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - ck_ref.rate = 13000000; -#elif defined(CONFIG_ARCH_OMAP16XX) - if (crystal_type == 2) - ck_ref.rate = 19200000; -#endif - - printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", - omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), - omap_readw(ARM_CKCTL)); - - /* We want to be in syncronous scalable mode */ - omap_writew(0x1000, ARM_SYSST); - -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. - */ - { - unsigned pll_ctl_val = omap_readw(DPLL_CTL); - - ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ - if (pll_ctl_val & 0x10) { - /* PLL enabled, apply multiplier and divisor */ - if (pll_ctl_val & 0xf80) - ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; - ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; - } else { - /* PLL disabled, apply bypass divisor */ - switch (pll_ctl_val & 0xc) { - case 0: - break; - case 0x4: - ck_dpll1.rate /= 2; - break; - default: - ck_dpll1.rate /= 4; - break; - } - } - } -#else - /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - } -#endif - propagate_rate(&ck_dpll1); - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - -#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); -#endif - - /* Amstrad Delta wants BCLK high when inactive */ - if (machine_is_ams_delta()) - omap_writel(omap_readl(ULPD_CLOCK_CTRL) | - (1 << SDW_MCLK_INV_BIT), - ULPD_CLOCK_CTRL); - - /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap7xx()) - omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); - else - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); - - /* Put DSP/MPUI into reset until needed */ - omap_writew(0, ARM_RSTCT1); - omap_writew(1, ARM_RSTCT2); - omap_writew(0x400, ARM_IDLECT1); - - /* - * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) - * of the ARM_IDLECT2 register must be set to zero. The power-on - * default value of this bit is one. - */ - omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable(&armper_ck.clk); - clk_enable(&armxor_ck.clk); - clk_enable(&armtim_ck.clk); /* This should be done by timer code */ - - if (cpu_is_omap15xx()) - clk_enable(&arm_gpio_ck); - - return 0; -} diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 70195ca..5f6a5bc 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock.h * - * Copyright (C) 2004 - 2005 Nokia corporation + * Copyright (C) 2004 - 2005, 2009 Nokia corporation * Written by Tuukka Tikkanen * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc * @@ -13,30 +13,31 @@ #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H #define __ARCH_ARM_MACH_OMAP1_CLOCK_H -static unsigned long omap1_ckctl_recalc(struct clk *clk); -static unsigned long omap1_watchdog_recalc(struct clk *clk); -static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); -static unsigned long omap1_sossi_recalc(struct clk *clk); -static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); -static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); -static int omap1_set_uart_rate(struct clk * clk, unsigned long rate); -static unsigned long omap1_uart_recalc(struct clk *clk); -static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate); -static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate); -static void omap1_init_ext_clk(struct clk * clk); -static int omap1_select_table_rate(struct clk * clk, unsigned long rate); -static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); - -static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); -static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); - -struct mpu_rate { - unsigned long rate; - unsigned long xtal; - unsigned long pll_rate; - __u16 ckctl_val; - __u16 dpllctl_val; -}; +#include + +#include + +extern int __init omap1_clk_init(void); +extern int omap1_clk_enable(struct clk *clk); +extern void omap1_clk_disable(struct clk *clk); +extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); +extern void __init omap1_clk_disable_unused(struct clk *clk); +extern unsigned long omap1_ckctl_recalc(struct clk *clk); +extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_sossi_recalc(struct clk *clk); +extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); +extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); +extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_uart_recalc(struct clk *clk); +extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); +extern void omap1_init_ext_clk(struct clk *clk); +extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern unsigned long omap1_watchdog_recalc(struct clk *clk); struct uart_clk { struct clk clk; @@ -96,611 +97,12 @@ struct arm_idlect1_clk { #define SOFT_REQ_REG 0xfffe0834 #define SOFT_REQ_REG2 0xfffe0880 -/*------------------------------------------------------------------------- - * Omap1 MPU rate table - *-------------------------------------------------------------------------*/ -static struct mpu_rate rate_table[] = { - /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL - * NOTE: Comment order here is different from bits in CKCTL value: - * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv - */ -#if defined(CONFIG_OMAP_ARM_216MHZ) - { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_195MHZ) - { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_192MHZ) - { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ - { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ - { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ - { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_182MHZ) - { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_168MHZ) - { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_120MHZ) - { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_96MHZ) - { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_60MHZ) - { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_30MHZ) - { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ -#endif - { 0, 0, 0, 0, 0 }, -}; - -/*------------------------------------------------------------------------- - * Omap1 clocks - *-------------------------------------------------------------------------*/ - -static struct clk ck_ref = { - .name = "ck_ref", - .ops = &clkops_null, - .rate = 12000000, -}; - -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .ops = &clkops_null, - .parent = &ck_ref, -}; - -/* - * FIXME: This clock seems to be necessary but no-one has asked for its - * activation. [ FIX: SoSSI, SSR ] - */ -static struct arm_idlect1_clk ck_dpll1out = { - .clk = { - .name = "ck_dpll1out", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | - ENABLE_ON_INIT, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, - }, - .idlect_shift = 12, -}; - -static struct clk sossi_ck = { - .name = "ck_sossi", - .ops = &clkops_generic, - .parent = &ck_dpll1out.clk, - .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), - .enable_bit = 16, - .recalc = &omap1_sossi_recalc, - .set_rate = &omap1_set_sossi_rate, -}; - -static struct clk arm_ck = { - .name = "arm_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_ARMDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk armper_ck = { - .clk = { - .name = "armper_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 2, -}; - -/* - * FIXME: This clock seems to be necessary but no-one has asked for its - * activation. [ GPIO code for 1510 ] - */ -static struct clk arm_gpio_ck = { - .name = "arm_gpio_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = ENABLE_ON_INIT, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk armxor_ck = { - .clk = { - .name = "armxor_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 1, -}; - -static struct arm_idlect1_clk armtim_ck = { - .clk = { - .name = "armtim_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 9, -}; - -static struct arm_idlect1_clk armwdt_ck = { - .clk = { - .name = "armwdt_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_WDTCK, - .recalc = &omap1_watchdog_recalc, - }, - .idlect_shift = 0, -}; - -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &arm_ck, - .recalc = &followparent_recalc, - /* Note: On 16xx the frequency can be divided by 2 by programming - * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 - * - * 1510 version is in TC clocks. - */ -}; - -static struct clk dsp_ck = { - .name = "dsp_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), - .enable_bit = EN_DSPCK, - .rate_offset = CKCTL_DSPDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_DSPMMUDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspper_ck = { - .name = "dspper_ck", - .ops = &clkops_dspck, - .parent = &ck_dpll1, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc_dsp_domain, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = &omap1_clk_set_rate_dsp_domain, -}; - -static struct clk dspxor_ck = { - .name = "dspxor_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk dsptim_ck = { - .name = "dsptim_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, -}; - -/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ -static struct arm_idlect1_clk tc_ck = { - .clk = { - .name = "tc_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .rate_offset = CKCTL_TCDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 6, -}; - -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, - /* Note: On 1510 the frequency follows TC_CK - * - * 16xx version is in MPU clocks. - */ -}; - -static struct clk tipb_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "tipb_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk l3_ocpi_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "l3_ocpi_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, -}; - -static struct clk tc1_ck = { - .name = "tc1_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, -}; - -/* - * FIXME: This clock seems to be necessary but no-one has asked for its - * activation. [ pm.c (SRAM), CCP, Camera ] - */ -static struct clk tc2_ck = { - .name = "tc2_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = ENABLE_ON_INIT, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, -}; - -static struct clk dma_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "dma_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk api_ck = { - .clk = { - .name = "api_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_APICK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 8, -}; - -static struct arm_idlect1_clk lb_ck = { - .clk = { - .name = "lb_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 4, -}; - -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk lcd_ck_16xx = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk lcd_ck_1510 = { - .clk = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 3, -}; - -static struct clk uart1_1510 = { - .name = "uart1_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct uart_clk uart1_16xx = { - .clk = { - .name = "uart1_ck", - .ops = &clkops_uart, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, - }, - .sysc_addr = 0xfffb0054, -}; - -static struct clk uart2_ck = { - .name = "uart2_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct clk uart3_1510 = { - .name = "uart3_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct uart_clk uart3_16xx = { - .clk = { - .name = "uart3_ck", - .ops = &clkops_uart, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, - }, - .sysc_addr = 0xfffb9854, -}; - -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 6000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), - .enable_bit = USB_MCLK_EN_BIT, -}; - -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = USB_HOST_HHC_UHOST_EN, -}; - -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ - .enable_bit = 8 /* UHOST_EN */, -}; - -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 4, -}; - -static struct clk usb_dc_ck7xx = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 8, -}; - -static struct clk mclk_1510 = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 6, -}; - -static struct clk mclk_16xx = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), - .enable_bit = COM_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; +extern __u32 arm_idlect1_mask; +extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -static struct clk bclk_1510 = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = RATE_FIXED, -}; - -static struct clk bclk_16xx = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), - .enable_bit = SWD_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; - -static struct clk mmc1_ck = { - .name = "mmc_ck", - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 23, -}; - -static struct clk mmc2_ck = { - .name = "mmc_ck", - .id = 1, - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 20, -}; - -static struct clk mmc3_ck = { - .name = "mmc_ck", - .id = 2, - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 12, -}; - -static struct clk virtual_ck_mpu = { - .name = "mpu", - .ops = &clkops_null, - .parent = &arm_ck, /* Is smarter alias for */ - .recalc = &followparent_recalc, - .set_rate = &omap1_select_table_rate, - .round_rate = &omap1_round_to_table_rate, -}; - -/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK -remains active during MPU idle whenever this is enabled */ -static struct clk i2c_fck = { - .name = "i2c_fck", - .id = 1, - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armxor_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk i2c_ick = { - .name = "i2c_ick", - .id = 1, - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armper_ck.clk, - .recalc = &followparent_recalc, -}; +extern const struct clkops clkops_dspck; +extern const struct clkops clkops_dummy; +extern const struct clkops clkops_uart; +extern const struct clkops clkops_generic; #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c new file mode 100644 index 0000000..cf5f017 --- /dev/null +++ b/arch/arm/mach-omap1/clock_data.c @@ -0,0 +1,843 @@ +/* + * linux/arch/arm/mach-omap1/clock_data.c + * + * Copyright (C) 2004 - 2005, 2009 Nokia corporation + * Written by Tuukka Tikkanen + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include /* for machine_is_* */ + +#include +#include +#include +#include /* for OTG_BASE */ + +#include "clock.h" + +/*------------------------------------------------------------------------ + * Omap1 clocks + *-------------------------------------------------------------------------*/ + +/* XXX is this necessary? */ +static struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_dummy, + .flags = RATE_FIXED, +}; + +static struct clk ck_ref = { + .name = "ck_ref", + .ops = &clkops_null, + .rate = 12000000, +}; + +static struct clk ck_dpll1 = { + .name = "ck_dpll1", + .ops = &clkops_null, + .parent = &ck_ref, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ FIX: SoSSI, SSR ] + */ +static struct arm_idlect1_clk ck_dpll1out = { + .clk = { + .name = "ck_dpll1out", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | + ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_CKOUT_ARM, + .recalc = &followparent_recalc, + }, + .idlect_shift = 12, +}; + +static struct clk sossi_ck = { + .name = "ck_sossi", + .ops = &clkops_generic, + .parent = &ck_dpll1out.clk, + .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), + .enable_bit = 16, + .recalc = &omap1_sossi_recalc, + .set_rate = &omap1_set_sossi_rate, +}; + +static struct clk arm_ck = { + .name = "arm_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_ARMDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk armper_ck = { + .clk = { + .name = "armper_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 2, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ GPIO code for 1510 ] + */ +static struct clk arm_gpio_ck = { + .name = "arm_gpio_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_GPIOCK, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk armxor_ck = { + .clk = { + .name = "armxor_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 1, +}; + +static struct arm_idlect1_clk armtim_ck = { + .clk = { + .name = "armtim_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_TIMCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 9, +}; + +static struct arm_idlect1_clk armwdt_ck = { + .clk = { + .name = "armwdt_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_WDTCK, + .recalc = &omap1_watchdog_recalc, + }, + .idlect_shift = 0, +}; + +static struct clk arminth_ck16xx = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &arm_ck, + .recalc = &followparent_recalc, + /* Note: On 16xx the frequency can be divided by 2 by programming + * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 + * + * 1510 version is in TC clocks. + */ +}; + +static struct clk dsp_ck = { + .name = "dsp_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), + .enable_bit = EN_DSPCK, + .rate_offset = CKCTL_DSPDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspmmu_ck = { + .name = "dspmmu_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_DSPMMUDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspper_ck = { + .name = "dspper_ck", + .ops = &clkops_dspck, + .parent = &ck_dpll1, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc_dsp_domain, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = &omap1_clk_set_rate_dsp_domain, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, +}; + +/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ +static struct arm_idlect1_clk tc_ck = { + .clk = { + .name = "tc_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .rate_offset = CKCTL_TCDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 6, +}; + +static struct clk arminth_ck1510 = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, + /* Note: On 1510 the frequency follows TC_CK + * + * 16xx version is in MPU clocks. + */ +}; + +static struct clk tipb_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "tipb_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk l3_ocpi_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "l3_ocpi_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_OCPI_CK, + .recalc = &followparent_recalc, +}; + +static struct clk tc1_ck = { + .name = "tc1_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC1_CK, + .recalc = &followparent_recalc, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ pm.c (SRAM), CCP, Camera ] + */ +static struct clk tc2_ck = { + .name = "tc2_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC2_CK, + .recalc = &followparent_recalc, +}; + +static struct clk dma_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "dma_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk dma_lcdfree_ck = { + .name = "dma_lcdfree_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk api_ck = { + .clk = { + .name = "api_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_APICK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 8, +}; + +static struct arm_idlect1_clk lb_ck = { + .clk = { + .name = "lb_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LBCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 4, +}; + +static struct clk rhea1_ck = { + .name = "rhea1_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk rhea2_ck = { + .name = "rhea2_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk lcd_ck_16xx = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk lcd_ck_1510 = { + .clk = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 3, +}; + +static struct clk uart1_1510 = { + .name = "uart1_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct uart_clk uart1_16xx = { + .clk = { + .name = "uart1_ck", + .ops = &clkops_uart, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 29, + }, + .sysc_addr = 0xfffb0054, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct clk uart3_1510 = { + .name = "uart3_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct uart_clk uart3_16xx = { + .clk = { + .name = "uart3_ck", + .ops = &clkops_uart, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 31, + }, + .sysc_addr = 0xfffb9854, +}; + +static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ + .name = "usb_clko", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 6000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), + .enable_bit = USB_MCLK_EN_BIT, +}; + +static struct clk usb_hhc_ck1510 = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = USB_HOST_HHC_UHOST_EN, +}; + +static struct clk usb_hhc_ck16xx = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ + .enable_bit = 8 /* UHOST_EN */, +}; + +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 4, +}; + +static struct clk usb_dc_ck7xx = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 8, +}; + +static struct clk mclk_1510 = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 6, +}; + +static struct clk mclk_16xx = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), + .enable_bit = COM_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk bclk_1510 = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = RATE_FIXED, +}; + +static struct clk bclk_16xx = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), + .enable_bit = SWD_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk mmc1_ck = { + .name = "mmc_ck", + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 23, +}; + +static struct clk mmc2_ck = { + .name = "mmc_ck", + .id = 1, + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 20, +}; + +static struct clk mmc3_ck = { + .name = "mmc_ck", + .id = 2, + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 12, +}; + +static struct clk virtual_ck_mpu = { + .name = "mpu", + .ops = &clkops_null, + .parent = &arm_ck, /* Is smarter alias for */ + .recalc = &followparent_recalc, + .set_rate = &omap1_select_table_rate, + .round_rate = &omap1_round_to_table_rate, +}; + +/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK +remains active during MPU idle whenever this is enabled */ +static struct clk i2c_fck = { + .name = "i2c_fck", + .id = 1, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armxor_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c_ick = { + .name = "i2c_ick", + .id = 1, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armper_ck.clk, + .recalc = &followparent_recalc, +}; + +/* + * clkdev integration + */ + +static struct omap_clk omap_clks[] = { + /* non-ULPD clocks */ + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + /* CK_GEN1 clocks */ + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), + CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), + CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), + CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), + /* CK_GEN2 clocks */ + CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + /* CK_GEN3 clocks */ + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), + CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), + CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), + CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + /* ULPD clocks */ + CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), + CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), + CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), + CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), + CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), + CLK(NULL, "mclk", &mclk_16xx, CK_16XX), + CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), + CLK(NULL, "bclk", &bclk_16xx, CK_16XX), + CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), + CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), + CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), + /* Virtual clocks */ + CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), + CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), +}; + +/* + * init + */ + +static struct clk_functions omap1_clk_functions __initdata = { + .clk_enable = omap1_clk_enable, + .clk_disable = omap1_clk_disable, + .clk_round_rate = omap1_clk_round_rate, + .clk_set_rate = omap1_clk_set_rate, + .clk_disable_unused = omap1_clk_disable_unused, +}; + +int __init omap1_clk_init(void) +{ + struct omap_clk *c; + const struct omap_clock_config *info; + int crystal_type = 0; /* Default 12 MHz */ + u32 reg, cpu_mask; + +#ifdef CONFIG_DEBUG_LL + /* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. + */ + omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +#endif + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + reg = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(reg, SOFT_REQ_REG); + if (!cpu_is_omap15xx()) + omap_writew(0, SOFT_REQ_REG2); + + clk_init(&omap1_clk_functions); + + /* By default all idlect1 clocks are allowed to idle */ + arm_idlect1_mask = ~0; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + clk_preinit(c->lk.clk); + + cpu_mask = 0; + if (cpu_is_omap16xx()) + cpu_mask |= CK_16XX; + if (cpu_is_omap1510()) + cpu_mask |= CK_1510; + if (cpu_is_omap7xx()) + cpu_mask |= CK_7XX; + if (cpu_is_omap310()) + cpu_mask |= CK_310; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + if (c->cpu & cpu_mask) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + } + + /* Pointers to these clocks are needed by code in clock.c */ + api_ck_p = clk_get(NULL, "api_ck"); + ck_dpll1_p = clk_get(NULL, "ck_dpll1"); + ck_ref_p = clk_get(NULL, "ck_ref"); + + info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); + if (info != NULL) { + if (!cpu_is_omap15xx()) + crystal_type = info->system_clock_type; + } + +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + ck_ref.rate = 13000000; +#elif defined(CONFIG_ARCH_OMAP16XX) + if (crystal_type == 2) + ck_ref.rate = 19200000; +#endif + + pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: " + "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + + /* We want to be in syncronous scalable mode */ + omap_writew(0x1000, ARM_SYSST); + +#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER + /* Use values set by bootloader. Determine PLL rate and recalculate + * dependent clocks as if kernel had changed PLL or divisors. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } +#else + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + printk(KERN_ERR "System frequencies not set. Check your config.\n"); + /* Guess sane values (60MHz) */ + omap_writew(0x2290, DPLL_CTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + ck_dpll1.rate = 60000000; + } +#endif + propagate_rate(&ck_dpll1); + /* Cache rates for clocks connected to ck_ref (not dpll1) */ + propagate_rate(&ck_ref); + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); + +#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) + /* Select slicer output as OMAP input clock */ + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); +#endif + + /* Amstrad Delta wants BCLK high when inactive */ + if (machine_is_ams_delta()) + omap_writel(omap_readl(ULPD_CLOCK_CTRL) | + (1 << SDW_MCLK_INV_BIT), + ULPD_CLOCK_CTRL); + + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ + /* (on 730, bit 13 must not be cleared) */ + if (cpu_is_omap7xx()) + omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); + else + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + + /* Put DSP/MPUI into reset until needed */ + omap_writew(0, ARM_RSTCT1); + omap_writew(1, ARM_RSTCT2); + omap_writew(0x400, ARM_IDLECT1); + + /* + * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) + * of the ARM_IDLECT2 register must be set to zero. The power-on + * default value of this bit is one. + */ + omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable(&armper_ck.clk); + clk_enable(&armxor_ck.clk); + clk_enable(&armtim_ck.clk); /* This should be done by timer code */ + + if (cpu_is_omap15xx()) + clk_enable(&arm_gpio_ck); + + return 0; +} diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 2a6d68a..d9b8d82 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,7 +18,8 @@ #include #include -extern int omap1_clk_init(void); +#include "clock.h" + extern void omap_check_revision(void); extern void omap_sram_init(void); extern void omapfb_reserve_sdram(void); diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h new file mode 100644 index 0000000..07074d7 --- /dev/null +++ b/arch/arm/mach-omap1/opp.h @@ -0,0 +1,28 @@ +/* + * linux/arch/arm/mach-omap1/opp.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H +#define __ARCH_ARM_MACH_OMAP1_OPP_H + +#include + +struct mpu_rate { + unsigned long rate; + unsigned long xtal; + unsigned long pll_rate; + __u16 ckctl_val; + __u16 dpllctl_val; +}; + +extern struct mpu_rate omap1_rate_table[]; + +#endif diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c new file mode 100644 index 0000000..75a5465 --- /dev/null +++ b/arch/arm/mach-omap1/opp_data.c @@ -0,0 +1,59 @@ +/* + * linux/arch/arm/mach-omap1/opp_data.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "opp.h" + +/*------------------------------------------------------------------------- + * Omap1 MPU rate table + *-------------------------------------------------------------------------*/ +struct mpu_rate omap1_rate_table[] = { + /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL + * NOTE: Comment order here is different from bits in CKCTL value: + * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv + */ +#if defined(CONFIG_OMAP_ARM_216MHZ) + { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_195MHZ) + { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_192MHZ) + { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ + { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ + { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ + { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ + { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_182MHZ) + { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_168MHZ) + { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_150MHZ) + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_120MHZ) + { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_96MHZ) + { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_60MHZ) + { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_30MHZ) + { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ +#endif + { 0, 0, 0, 0, 0 }, +}; + diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index 97b8c12..96e5d38 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -11,8 +11,8 @@ #include struct omap_clk { - u32 cpu; - struct clk_lookup lk; + u16 cpu; + struct clk_lookup lk; }; #define CLK(dev, con, ck, cp) \ @@ -26,11 +26,15 @@ struct omap_clk { } -#define CK_243X (1 << 0) -#define CK_242X (1 << 1) -#define CK_343X (1 << 2) -#define CK_3430ES1 (1 << 3) -#define CK_3430ES2 (1 << 4) +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) +#define CK_243X (1 << 4) +#define CK_242X (1 << 5) +#define CK_343X (1 << 6) +#define CK_3430ES1 (1 << 7) +#define CK_3430ES2 (1 << 8) #endif