From patchwork Sat Dec 7 12:42:02 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dhruv Menon X-Patchwork-Id: 13898259 Received: from mail-pf1-f180.google.com (mail-pf1-f180.google.com [209.85.210.180]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C8087146019; Sat, 7 Dec 2024 12:44:44 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.210.180 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733575486; cv=none; b=XjIOGDdn2t9lqSsO7j90Z6zWvK/IRQLA/e6M6LHV66crMmYwKO+JvU/teMQ9Bk4cLvh3gkFWbGa6g1h3oZD32YDgHuaPI+8yaSpeHvghpbimyFd2h2D6IziUQ02QUxmrp5JKC3jIaWJmHiiI+6W7DftE72tpEYr6D+bMxGV3q+E= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733575486; c=relaxed/simple; bh=DZFiH7OcpXTx2gbyhNNaP3OgjZjVhkt9WI+lPhvUTNQ=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=j/3b9/ufAa5kjqYt4Y6rpHjDOmCdVgencM1Z+Lu6VovtIOyzW0L3F7hHQWIsa/zbgMdbr6SyOhFtWF7tri9KAy1LwYMNSwmnWMgrsH/VGCPUFxOLW2aCgUMCFM2VzXdDm6JuIQykVD3M2z95Kpug0BG/3yHGbUC96vwVrbUu76E= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=JgAY9i92; arc=none smtp.client-ip=209.85.210.180 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="JgAY9i92" Received: by mail-pf1-f180.google.com with SMTP id d2e1a72fcca58-7251331e756so3207217b3a.3; Sat, 07 Dec 2024 04:44:44 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1733575484; x=1734180284; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=q54VpEYJdMjsNCN94HkXizbNIoHxRVwmAQ13CoTaIfM=; b=JgAY9i92YpLR4hQhk7Kmfo20YmWq7m2DZDdfJUIBLgvEVQtIMfOzO6cdTe6mpnpJ9z G9GmAIN/CajeVs8lKqVP6aSRxtyGL1ah/Cb4X2WYMn2KJ2uHv89cU+Upx5q77+YRoon3 JKcJHPDzz2ydt+lbjDsG9H1kPQ/XTyKD8Ne8W0t9co3BIFgb5ffxxe7HrwaDdWpwhbSH tOWRGgGo9JJPXy3rF0ytqliO/Q6P0wfq4orTBk5Xmb15g098UejnKp08zpcEJFPq40uM bIyQOEW2gdfOo5j51dDTbAbN0v0JO7V9wdBDmr/0vYJcyjGd4U+++QGIaW2sk2Zk4uqD QG4g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1733575484; x=1734180284; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=q54VpEYJdMjsNCN94HkXizbNIoHxRVwmAQ13CoTaIfM=; b=NtyKRZem8DMG5y4KNnJSff/IU73HM7nwpi+fsshzaj6nu2pjnOlz4e81j6pfVpUtM4 OM4UWYKVlbKCCanPYTBRcZ99zfyxLJrtOyLJMH0w0kfOzsBFYAGKdiz4P0lrJcOHGQtz SfwTJ9aajt9SdUEK9OWMw6zT1wE8lHaCt6d4FZdePGnaQii4naF16hLxCJiPoGJ6CXfW 2RfkbLLahmbgskS9i2wakcXwCZeWXEqL58kVNB5iMBW5HWI+lPw99XaXxpvxUGeVyPRv U/Ver35Qqp/DB4JGvGDJGszlQ5+n6FJ7/rfAbjker68IRou3hoKeJxSEzFa8ZD6ofypI jYEw== X-Forwarded-Encrypted: i=1; AJvYcCUo9rdU1DT4c0rtobjaN1N59u8tDtyoR6AFwyq7pFrvgBDZFBEoiwE1lwNV/VTOR2WB/iRYQwlpQpteIA==@vger.kernel.org, AJvYcCXgzkgzFSH9yBco2hWQiP944AeBvO/Bhy67dfSh6IMLwTcK1X1cLWb6wcatTjrTMIy3Da1IotD9lQw=@vger.kernel.org X-Gm-Message-State: AOJu0Yxt7/sY4c7x+VXtgdryFDO6DeGTtssCykHJx/2CxAvze+tGtADa L/DlhK3QrGAvGYyz+UMMw+djdLK29A7JPt4jWEL455GDOyfMX455 X-Gm-Gg: ASbGnct0aNd/CStkCuO/VUwG7+65KjWcPoOxWrZXmB/i2xINxmKFp1aXB1uSUPMsvay 5fjGUdWliAPDjQtFFdGO/wol2UPnn1yqVIH5VKmT90Ms8WI+QZ7Fd1C7svW4XLoZp2dhfbeCnKG shuhOl2YWsfmKN7gVVBqUJ0rHWW4vgPkkvDi724oB4x70njuXRBiDcw3ONSWlKosqFHsFExQ2ri NHD7nVLLJRbYGtvr1gdFUdHawD0ox93w5hlRMSBZOLP+pT4xnrtVYk= X-Google-Smtp-Source: AGHT+IHmSM5HvInvy2LtxKyOBx8lZtVgbdQBiMaNu8Rr2gh3tI8PaeuV1X+ya9FnaeJd73Zgl4lJ0w== X-Received: by 2002:a05:6a20:4303:b0:1db:f00e:2dfe with SMTP id adf61e73a8af0-1e1871371a3mr11704514637.39.1733575483971; Sat, 07 Dec 2024 04:44:43 -0800 (PST) Received: from melbuntu.. ([122.171.22.181]) by smtp.gmail.com with ESMTPSA id d2e1a72fcca58-725c82b4852sm1700850b3a.135.2024.12.07.04.44.39 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 07 Dec 2024 04:44:43 -0800 (PST) From: Dhruv Menon To: aaro.koskinen@iki.fi, andreas@kemnade.info, vigneshr@ti.com, andi.shyti@kernel.org Cc: jmkrzyszt@gmail.com, tony@atomide.com, khilman@baylibre.com, rogerq@kernel.org, linux-omap@vger.kernel.org, linux-i2c@vger.kernel.org, Dhruv Menon Subject: [PATCH v3 1/2] i2c: omap: Clean up coding style Date: Sat, 7 Dec 2024 18:12:02 +0530 Message-ID: X-Mailer: git-send-email 2.43.0 In-Reply-To: References: Precedence: bulk X-Mailing-List: linux-omap@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 This commit addresses the coding style issues present in i2c-omap.c, identified by checkpatch.pl. 1. BIT Macros utilization 2. Spelling correction 3. Alignment correction 4. Unnecessary blank lines removal No functional changes have been introduced in this commit. Signed-off-by: Dhruv Menon --- drivers/i2c/busses/i2c-omap.c | 189 +++++++++++++++++----------------- 1 file changed, 92 insertions(+), 97 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 1d9ad25c89ae..df945ddfe089 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -78,39 +78,39 @@ enum { }; /* I2C Interrupt Enable Register (OMAP_I2C_IE): */ -#define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */ -#define OMAP_I2C_IE_RDR (1 << 13) /* RX Buffer drain int enable */ -#define OMAP_I2C_IE_XRDY (1 << 4) /* TX data ready int enable */ -#define OMAP_I2C_IE_RRDY (1 << 3) /* RX data ready int enable */ -#define OMAP_I2C_IE_ARDY (1 << 2) /* Access ready int enable */ -#define OMAP_I2C_IE_NACK (1 << 1) /* No ack interrupt enable */ -#define OMAP_I2C_IE_AL (1 << 0) /* Arbitration lost int ena */ +#define OMAP_I2C_IE_XDR BIT(14) /* TX Buffer drain int enable */ +#define OMAP_I2C_IE_RDR BIT(13) /* RX Buffer drain int enable */ +#define OMAP_I2C_IE_XRDY BIT(4) /* TX data ready int enable */ +#define OMAP_I2C_IE_RRDY BIT(3) /* RX data ready int enable */ +#define OMAP_I2C_IE_ARDY BIT(2) /* Access ready int enable */ +#define OMAP_I2C_IE_NACK BIT(1) /* No ack interrupt enable */ +#define OMAP_I2C_IE_AL BIT(0) /* Arbitration lost int ena */ /* I2C Status Register (OMAP_I2C_STAT): */ -#define OMAP_I2C_STAT_XDR (1 << 14) /* TX Buffer draining */ -#define OMAP_I2C_STAT_RDR (1 << 13) /* RX Buffer draining */ -#define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */ -#define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */ -#define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ -#define OMAP_I2C_STAT_AAS (1 << 9) /* Address as slave */ -#define OMAP_I2C_STAT_BF (1 << 8) /* Bus Free */ -#define OMAP_I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ -#define OMAP_I2C_STAT_RRDY (1 << 3) /* Receive data ready */ -#define OMAP_I2C_STAT_ARDY (1 << 2) /* Register access ready */ -#define OMAP_I2C_STAT_NACK (1 << 1) /* No ack interrupt enable */ -#define OMAP_I2C_STAT_AL (1 << 0) /* Arbitration lost int ena */ +#define OMAP_I2C_STAT_XDR BIT(14) /* TX Buffer draining */ +#define OMAP_I2C_STAT_RDR BIT(13) /* RX Buffer draining */ +#define OMAP_I2C_STAT_BB BIT(12) /* Bus busy */ +#define OMAP_I2C_STAT_ROVR BIT(11) /* Receive overrun */ +#define OMAP_I2C_STAT_XUDF BIT(10) /* Transmit underflow */ +#define OMAP_I2C_STAT_AAS BIT(9) /* Address as slave */ +#define OMAP_I2C_STAT_BF BIT(8) /* Bus Free */ +#define OMAP_I2C_STAT_XRDY BIT(4) /* Transmit data ready */ +#define OMAP_I2C_STAT_RRDY BIT(3) /* Receive data ready */ +#define OMAP_I2C_STAT_ARDY BIT(2) /* Register access ready */ +#define OMAP_I2C_STAT_NACK BIT(1) /* No ack interrupt enable */ +#define OMAP_I2C_STAT_AL BIT(0) /* Arbitration lost int ena */ /* I2C WE wakeup enable register */ -#define OMAP_I2C_WE_XDR_WE (1 << 14) /* TX drain wakup */ -#define OMAP_I2C_WE_RDR_WE (1 << 13) /* RX drain wakeup */ -#define OMAP_I2C_WE_AAS_WE (1 << 9) /* Address as slave wakeup*/ -#define OMAP_I2C_WE_BF_WE (1 << 8) /* Bus free wakeup */ -#define OMAP_I2C_WE_STC_WE (1 << 6) /* Start condition wakeup */ -#define OMAP_I2C_WE_GC_WE (1 << 5) /* General call wakeup */ -#define OMAP_I2C_WE_DRDY_WE (1 << 3) /* TX/RX data ready wakeup */ -#define OMAP_I2C_WE_ARDY_WE (1 << 2) /* Reg access ready wakeup */ -#define OMAP_I2C_WE_NACK_WE (1 << 1) /* No acknowledgment wakeup */ -#define OMAP_I2C_WE_AL_WE (1 << 0) /* Arbitration lost wakeup */ +#define OMAP_I2C_WE_XDR_WE BIT(14) /* TX drain wakup */ +#define OMAP_I2C_WE_RDR_WE BIT(13) /* RX drain wakeup */ +#define OMAP_I2C_WE_AAS_WE BIT(9) /* Address as slave wakeup*/ +#define OMAP_I2C_WE_BF_WE BIT(8) /* Bus free wakeup */ +#define OMAP_I2C_WE_STC_WE BIT(6) /* Start condition wakeup */ +#define OMAP_I2C_WE_GC_WE BIT(5) /* General call wakeup */ +#define OMAP_I2C_WE_DRDY_WE BIT(3) /* TX/RX data ready wakeup */ +#define OMAP_I2C_WE_ARDY_WE BIT(2) /* Reg access ready wakeup */ +#define OMAP_I2C_WE_NACK_WE BIT(1) /* No acknowledgment wakeup */ +#define OMAP_I2C_WE_AL_WE BIT(0) /* Arbitration lost wakeup */ #define OMAP_I2C_WE_ALL (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \ OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \ @@ -119,59 +119,59 @@ enum { OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE) /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */ -#define OMAP_I2C_BUF_RDMA_EN (1 << 15) /* RX DMA channel enable */ -#define OMAP_I2C_BUF_RXFIF_CLR (1 << 14) /* RX FIFO Clear */ -#define OMAP_I2C_BUF_XDMA_EN (1 << 7) /* TX DMA channel enable */ -#define OMAP_I2C_BUF_TXFIF_CLR (1 << 6) /* TX FIFO Clear */ +#define OMAP_I2C_BUF_RDMA_EN BIT(15) /* RX DMA channel enable */ +#define OMAP_I2C_BUF_RXFIF_CLR BIT(14) /* RX FIFO Clear */ +#define OMAP_I2C_BUF_XDMA_EN BIT(7) /* TX DMA channel enable */ +#define OMAP_I2C_BUF_TXFIF_CLR BIT(6) /* TX FIFO Clear */ /* I2C Configuration Register (OMAP_I2C_CON): */ -#define OMAP_I2C_CON_EN (1 << 15) /* I2C module enable */ -#define OMAP_I2C_CON_BE (1 << 14) /* Big endian mode */ -#define OMAP_I2C_CON_OPMODE_HS (1 << 12) /* High Speed support */ -#define OMAP_I2C_CON_STB (1 << 11) /* Start byte mode (master) */ -#define OMAP_I2C_CON_MST (1 << 10) /* Master/slave mode */ -#define OMAP_I2C_CON_TRX (1 << 9) /* TX/RX mode (master only) */ -#define OMAP_I2C_CON_XA (1 << 8) /* Expand address */ -#define OMAP_I2C_CON_RM (1 << 2) /* Repeat mode (master only) */ -#define OMAP_I2C_CON_STP (1 << 1) /* Stop cond (master only) */ -#define OMAP_I2C_CON_STT (1 << 0) /* Start condition (master) */ +#define OMAP_I2C_CON_EN BIT(15) /* I2C module enable */ +#define OMAP_I2C_CON_BE BIT(14) /* Big endian mode */ +#define OMAP_I2C_CON_OPMODE_HS BIT(12) /* High Speed support */ +#define OMAP_I2C_CON_STB BIT(11) /* Start byte mode (master) */ +#define OMAP_I2C_CON_MST BIT(10) /* Master/slave mode */ +#define OMAP_I2C_CON_TRX BIT(9) /* TX/RX mode (master only) */ +#define OMAP_I2C_CON_XA BIT(8) /* Expand address */ +#define OMAP_I2C_CON_RM BIT(2) /* Repeat mode (master only) */ +#define OMAP_I2C_CON_STP BIT(1) /* Stop cond (master only) */ +#define OMAP_I2C_CON_STT BIT(0) /* Start condition (master) */ /* I2C SCL time value when Master */ #define OMAP_I2C_SCLL_HSSCLL 8 #define OMAP_I2C_SCLH_HSSCLH 8 /* I2C System Test Register (OMAP_I2C_SYSTEST): */ -#define OMAP_I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ -#define OMAP_I2C_SYSTEST_FREE (1 << 14) /* Free running mode */ -#define OMAP_I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ -#define OMAP_I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ +#define OMAP_I2C_SYSTEST_ST_EN BIT(15) /* System test enable */ +#define OMAP_I2C_SYSTEST_FREE BIT(14) /* Free running mode */ +#define OMAP_I2C_SYSTEST_TMODE_MASK GENMASK(13, 12) /* Test mode select */ +#define OMAP_I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ /* Functional mode */ -#define OMAP_I2C_SYSTEST_SCL_I_FUNC (1 << 8) /* SCL line input value */ -#define OMAP_I2C_SYSTEST_SCL_O_FUNC (1 << 7) /* SCL line output value */ -#define OMAP_I2C_SYSTEST_SDA_I_FUNC (1 << 6) /* SDA line input value */ -#define OMAP_I2C_SYSTEST_SDA_O_FUNC (1 << 5) /* SDA line output value */ +#define OMAP_I2C_SYSTEST_SCL_I_FUNC BIT(8) /* SCL line input value */ +#define OMAP_I2C_SYSTEST_SCL_O_FUNC BIT(7) /* SCL line output value */ +#define OMAP_I2C_SYSTEST_SDA_I_FUNC BIT(6) /* SDA line input value */ +#define OMAP_I2C_SYSTEST_SDA_O_FUNC BIT(5) /* SDA line output value */ /* SDA/SCL IO mode */ -#define OMAP_I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense in */ -#define OMAP_I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive out */ -#define OMAP_I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense in */ -#define OMAP_I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive out */ +#define OMAP_I2C_SYSTEST_SCL_I BIT(3) /* SCL line sense in */ +#define OMAP_I2C_SYSTEST_SCL_O BIT(2) /* SCL line drive out */ +#define OMAP_I2C_SYSTEST_SDA_I BIT(1) /* SDA line sense in */ +#define OMAP_I2C_SYSTEST_SDA_O BIT(0) /* SDA line drive out */ /* OCP_SYSSTATUS bit definitions */ -#define SYSS_RESETDONE_MASK (1 << 0) +#define SYSS_RESETDONE_MASK BIT(0) /* OCP_SYSCONFIG bit definitions */ -#define SYSC_CLOCKACTIVITY_MASK (0x3 << 8) -#define SYSC_SIDLEMODE_MASK (0x3 << 3) -#define SYSC_ENAWAKEUP_MASK (1 << 2) -#define SYSC_SOFTRESET_MASK (1 << 1) -#define SYSC_AUTOIDLE_MASK (1 << 0) +#define SYSC_CLOCKACTIVITY_MASK GENMASK(9, 8) +#define SYSC_SIDLEMODE_MASK GENMASK(4, 3) +#define SYSC_ENAWAKEUP_MASK BIT(2) +#define SYSC_SOFTRESET_MASK BIT(1) +#define SYSC_AUTOIDLE_MASK BIT(0) #define SYSC_IDLEMODE_SMART 0x2 #define SYSC_CLOCKACTIVITY_FCLK 0x2 /* Errata definitions */ -#define I2C_OMAP_ERRATA_I207 (1 << 0) -#define I2C_OMAP_ERRATA_I462 (1 << 1) +#define I2C_OMAP_ERRATA_I207 BIT(0) +#define I2C_OMAP_ERRATA_I462 BIT(1) #define OMAP_I2C_IP_V2_INTERRUPTS_MASK 0x6FFF @@ -277,7 +277,6 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *omap, int reg) static void __omap_i2c_init(struct omap_i2c_dev *omap) { - omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ @@ -316,19 +315,19 @@ static int omap_i2c_reset(struct omap_i2c_dev *omap) /* Disable I2C controller before soft reset */ omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, - omap_i2c_read_reg(omap, OMAP_I2C_CON_REG) & - ~(OMAP_I2C_CON_EN)); + omap_i2c_read_reg(omap, OMAP_I2C_CON_REG) & + ~(OMAP_I2C_CON_EN)); omap_i2c_write_reg(omap, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK); /* For some reason we need to set the EN bit before the - * reset done bit gets set. */ + * reset done bit gets set. + */ timeout = jiffies + OMAP_I2C_TIMEOUT; omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); while (!(omap_i2c_read_reg(omap, OMAP_I2C_SYSS_REG) & SYSS_RESETDONE_MASK)) { if (time_after(jiffies, timeout)) { - dev_warn(omap->dev, "timeout waiting " - "for controller reset\n"); + dev_warn(omap->dev, "timeout waiting for controller reset\n"); return -ETIMEDOUT; } msleep(1); @@ -396,15 +395,13 @@ static int omap_i2c_init(struct omap_i2c_dev *omap) } if (!(omap->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) { - /* * HSI2C controller internal clk rate should be 19.2 Mhz for * HS and for all modes on 2430. On 34xx we can use lower rate * to get longer filter period for better noise suppression. * The filter is iclk (fclk for HS) period. */ - if (omap->speed > 400 || - omap->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK) + if (omap->speed > 400 || omap->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK) internal_clk = 19200; else if (omap->speed > 100) internal_clk = 9600; @@ -616,7 +613,7 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *omap, u8 size, bool is_rx) * then we might use draining feature to transfer the remaining bytes. */ - omap->threshold = clamp(size, (u8) 1, omap->fifo_size); + omap->threshold = clamp(size, (u8)1, omap->fifo_size); buf = omap_i2c_read_reg(omap, OMAP_I2C_BUF_REG); @@ -636,7 +633,7 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *omap, u8 size, bool is_rx) omap->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - if (omap->set_mpu_wkup_lat != NULL) + if (omap->set_mpu_wkup_lat) omap->latency = (1000000 * omap->threshold) / (1000 * omap->speed / 8); } @@ -718,13 +715,13 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, if (omap->b_hw && stop) { unsigned long delay = jiffies + OMAP_I2C_TIMEOUT; u16 con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG); + while (con & OMAP_I2C_CON_STT) { con = omap_i2c_read_reg(omap, OMAP_I2C_CON_REG); /* Let the user know if i2c is in a bad state */ if (time_after(jiffies, delay)) { - dev_err(omap->dev, "controller timed out " - "waiting for start condition to finish\n"); + dev_err(omap->dev, "controller timed out waiting for start condition to finish\n"); return -ETIMEDOUT; } cpu_relax(); @@ -782,7 +779,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, return -EIO; } - /* * Prepare controller for a transaction and call omap_i2c_xfer_msg * to do the work during IRQ processing. @@ -807,7 +803,7 @@ omap_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg msgs[], int num, if (r < 0) goto out; - if (omap->set_mpu_wkup_lat != NULL) + if (omap->set_mpu_wkup_lat) omap->set_mpu_wkup_lat(omap->dev, omap->latency); for (i = 0; i < num; i++) { @@ -822,7 +818,7 @@ omap_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg msgs[], int num, omap_i2c_wait_for_bb(omap); - if (omap->set_mpu_wkup_lat != NULL) + if (omap->set_mpu_wkup_lat) omap->set_mpu_wkup_lat(omap->dev, -1); out: @@ -875,18 +871,15 @@ static inline void i2c_omap_errata_i207(struct omap_i2c_dev *omap, u16 stat) if (stat & OMAP_I2C_STAT_RDR) { /* Step 1: If RDR is set, clear it */ omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR); - /* Step 2: */ if (!(omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB)) { - /* Step 3: */ if (omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_RDR) { omap_i2c_ack_stat(omap, OMAP_I2C_STAT_RDR); dev_dbg(omap->dev, "RDR when bus is busy.\n"); } - } } } @@ -911,7 +904,7 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id) dev_err(omap->dev, "Arbitration lost\n"); omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_AL); break; - case 0x02: /* No acknowledgement */ + case 0x02: /* No acknowledgment */ omap_i2c_complete_cmd(omap, OMAP_I2C_STAT_NACK); omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP); break; @@ -927,8 +920,9 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id) *omap->buf++ = w >> 8; omap->buf_len--; } - } else + } else { dev_err(omap->dev, "RRDY IRQ while no data requested\n"); + } break; case 0x05: /* Transmit data ready */ if (omap->buf_len) { @@ -939,8 +933,9 @@ omap_i2c_omap1_isr(int this_irq, void *dev_id) omap->buf_len--; } omap_i2c_write_reg(omap, OMAP_I2C_DATA_REG, w); - } else + } else { dev_err(omap->dev, "XRDY IRQ while no data to send\n"); + } break; default: return IRQ_NONE; @@ -1266,13 +1261,13 @@ static const struct of_device_id omap_i2c_of_match[] = { MODULE_DEVICE_TABLE(of, omap_i2c_of_match); #endif -#define OMAP_I2C_SCHEME(rev) ((rev & 0xc000) >> 14) +#define OMAP_I2C_SCHEME(rev) (((rev) & 0xc000) >> 14) -#define OMAP_I2C_REV_SCHEME_0_MAJOR(rev) (rev >> 4) -#define OMAP_I2C_REV_SCHEME_0_MINOR(rev) (rev & 0xf) +#define OMAP_I2C_REV_SCHEME_0_MAJOR(rev) (((rev) >> 4)) +#define OMAP_I2C_REV_SCHEME_0_MINOR(rev) (((rev) & 0xf)) -#define OMAP_I2C_REV_SCHEME_1_MAJOR(rev) ((rev & 0x0700) >> 7) -#define OMAP_I2C_REV_SCHEME_1_MINOR(rev) (rev & 0x1f) +#define OMAP_I2C_REV_SCHEME_1_MAJOR(rev) (((rev) & 0x0700) >> 7) +#define OMAP_I2C_REV_SCHEME_1_MINOR(rev) (((rev) & 0x1f)) #define OMAP_I2C_SCHEME_0 0 #define OMAP_I2C_SCHEME_1 1 @@ -1383,7 +1378,7 @@ omap_i2c_probe(struct platform_device *pdev) of_property_read_u32(node, "clock-frequency", &freq); /* convert DT freq value in Hz into kHz for speed */ omap->speed = freq / 1000; - } else if (pdata != NULL) { + } else if (pdata) { omap->speed = pdata->clkrate; omap->flags = pdata->flags; omap->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; @@ -1434,7 +1429,7 @@ omap_i2c_probe(struct platform_device *pdev) omap->errata = 0; if (omap->rev >= OMAP_I2C_REV_ON_2430 && - omap->rev < OMAP_I2C_REV_ON_4430_PLUS) + omap->rev < OMAP_I2C_REV_ON_4430_PLUS) omap->errata |= I2C_OMAP_ERRATA_I207; if (omap->rev <= OMAP_I2C_REV_ON_3430_3530) @@ -1459,7 +1454,7 @@ omap_i2c_probe(struct platform_device *pdev) omap->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ - if (omap->set_mpu_wkup_lat != NULL) + if (omap->set_mpu_wkup_lat) omap->latency = (1000000 * omap->fifo_size) / (1000 * omap->speed / 8); } @@ -1469,12 +1464,12 @@ omap_i2c_probe(struct platform_device *pdev) if (omap->rev < OMAP_I2C_OMAP1_REV_2) r = devm_request_irq(&pdev->dev, omap->irq, omap_i2c_omap1_isr, - IRQF_NO_SUSPEND, pdev->name, omap); + IRQF_NO_SUSPEND, pdev->name, omap); else r = devm_request_threaded_irq(&pdev->dev, omap->irq, - omap_i2c_isr, omap_i2c_isr_thread, - IRQF_NO_SUSPEND | IRQF_ONESHOT, - pdev->name, omap); + omap_i2c_isr, omap_i2c_isr_thread, + IRQF_NO_SUSPEND | IRQF_ONESHOT, + pdev->name, omap); if (r) { dev_err(omap->dev, "failure requesting irq %i\n", omap->irq);