diff mbox series

[V4,35/37] x86/smpboot: Implement a bit spinlock to protect the realmode stack

Message ID 20230512205257.355425551@linutronix.de (mailing list archive)
State Awaiting Upstream
Headers show
Series [V4,01/37] x86/smpboot: Cleanup topology_phys_to_logical_pkg()/die() | expand

Commit Message

Thomas Gleixner May 12, 2023, 9:07 p.m. UTC
From: Thomas Gleixner <tglx@linutronix.de>

Parallel AP bringup requires that the APs can run fully parallel through
the early startup code including the real mode trampoline.

To prepare for this implement a bit-spinlock to serialize access to the
real mode stack so that parallel upcoming APs are not going to corrupt each
others stack while going through the real mode startup code.

Co-developed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
---
V4: Simplify the lock implementation - Peter Z.
---
 arch/x86/include/asm/realmode.h      |    3 +++
 arch/x86/kernel/head_64.S            |   12 ++++++++++++
 arch/x86/realmode/init.c             |    3 +++
 arch/x86/realmode/rm/trampoline_64.S |   23 ++++++++++++++++++-----
 4 files changed, 36 insertions(+), 5 deletions(-)
diff mbox series

Patch

--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@@ -52,6 +52,7 @@  struct trampoline_header {
 	u64 efer;
 	u32 cr4;
 	u32 flags;
+	u32 lock;
 #endif
 };
 
@@ -64,6 +65,8 @@  extern unsigned long initial_stack;
 extern unsigned long initial_vc_handler;
 #endif
 
+extern u32 *trampoline_lock;
+
 extern unsigned char real_mode_blob[];
 extern unsigned char real_mode_relocs[];
 
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -252,6 +252,16 @@  SYM_INNER_LABEL(secondary_startup_64_no_
 	movq	TASK_threadsp(%rax), %rsp
 
 	/*
+	 * Now that this CPU is running on its own stack, drop the realmode
+	 * protection. For the boot CPU the pointer is NULL!
+	 */
+	movq	trampoline_lock(%rip), %rax
+	testq	%rax, %rax
+	jz	.Lsetup_gdt
+	movl	$0, (%rax)
+
+.Lsetup_gdt:
+	/*
 	 * We must switch to a new descriptor in kernel space for the GDT
 	 * because soon the kernel won't have access anymore to the userspace
 	 * addresses where we're currently running on. We have to do that here
@@ -433,6 +443,8 @@  SYM_DATA(initial_code,	.quad x86_64_star
 #ifdef CONFIG_AMD_MEM_ENCRYPT
 SYM_DATA(initial_vc_handler,	.quad handle_vc_boot_ghcb)
 #endif
+
+SYM_DATA(trampoline_lock, .quad 0);
 	__FINITDATA
 
 	__INIT
--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -154,6 +154,9 @@  static void __init setup_real_mode(void)
 
 	trampoline_header->flags = 0;
 
+	trampoline_lock = &trampoline_header->lock;
+	*trampoline_lock = 0;
+
 	trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd);
 
 	/* Map the real mode stub as virtual == physical */
--- a/arch/x86/realmode/rm/trampoline_64.S
+++ b/arch/x86/realmode/rm/trampoline_64.S
@@ -37,6 +37,20 @@ 
 	.text
 	.code16
 
+.macro LOAD_REALMODE_ESP
+	/*
+	 * Make sure only one CPU fiddles with the realmode stack
+	*/
+.Llock_rm\@:
+        lock btsl       $0, tr_lock
+        jnc             2f
+        pause
+        jmp             .Llock_rm\@
+2:
+	# Setup stack
+	movl	$rm_stack_end, %esp
+.endm
+
 	.balign	PAGE_SIZE
 SYM_CODE_START(trampoline_start)
 	cli			# We should be safe anyway
@@ -49,8 +63,7 @@  SYM_CODE_START(trampoline_start)
 	mov	%ax, %es
 	mov	%ax, %ss
 
-	# Setup stack
-	movl	$rm_stack_end, %esp
+	LOAD_REALMODE_ESP
 
 	call	verify_cpu		# Verify the cpu supports long mode
 	testl   %eax, %eax		# Check for return code
@@ -93,8 +106,7 @@  SYM_CODE_START(sev_es_trampoline_start)
 	mov	%ax, %es
 	mov	%ax, %ss
 
-	# Setup stack
-	movl	$rm_stack_end, %esp
+	LOAD_REALMODE_ESP
 
 	jmp	.Lswitch_to_protected
 SYM_CODE_END(sev_es_trampoline_start)
@@ -177,7 +189,7 @@  SYM_CODE_START(pa_trampoline_compat)
 	 * In compatibility mode.  Prep ESP and DX for startup_32, then disable
 	 * paging and complete the switch to legacy 32-bit mode.
 	 */
-	movl	$rm_stack_end, %esp
+	LOAD_REALMODE_ESP
 	movw	$__KERNEL_DS, %dx
 
 	movl	$(CR0_STATE & ~X86_CR0_PG), %eax
@@ -241,6 +253,7 @@  SYM_DATA_START(trampoline_header)
 	SYM_DATA(tr_efer,		.space 8)
 	SYM_DATA(tr_cr4,		.space 4)
 	SYM_DATA(tr_flags,		.space 4)
+	SYM_DATA(tr_lock,		.space 4)
 SYM_DATA_END(trampoline_header)
 
 #include "trampoline_common.S"