diff --git a/Documentation/ABI/testing/configfs-spear-pcie-gadget b/Documentation/ABI/testing/configfs-spear-pcie-gadget
new file mode 100644
index 0000000..29593d0
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-spear-pcie-gadget
@@ -0,0 +1,30 @@
+What:		/config/pcie-gadget
+Date:		Feb 2011
+KernelVersion:	2.6.37
+Contact:	Pratyush Anand <pratyush.anand@st.com>
+Description:
+
+	Interface is used to configure selected dual mode PCIe controller
+	as device and then program its various registers to configure it
+	as a particular device type.
+	This interfaces can be used to show spear's PCIe device capability.
+
+	Nodes are only visible when configfs is mounted. To mount configfs
+	in /config directory use:
+	# mount -t configfs none /config/
+
+	/config/pcie-gadget/
+		link ... used to enable ltssm and read its status.
+		int_type ...used to configure and read type of supported
+			interrupt
+		no_of_msi ... used to configure number of MSI vector needed and
+			to read no of MSI granted.
+		inta ... write 1 to assert INTA and 0 to de-assert.
+		send_msi ... write MSI vector to be sent.
+		vendor_id ... used to write and read vendor id (hex)
+		device_id ... used to write and read device id (hex)
+		bar0_size ... used to write and read bar0_size
+		bar0_address ... used to write and read bar0 mapped area in hex.
+		bar0_rw_offset ... used to write and read offset of bar0 where
+			bar0_data will be written or read.
+		bar0_data ... used to write and read data at bar0_rw_offset.
diff --git a/Documentation/misc-devices/spear-pcie-gadget.txt b/Documentation/misc-devices/spear-pcie-gadget.txt
new file mode 100644
index 0000000..7b86b80
--- /dev/null
+++ b/Documentation/misc-devices/spear-pcie-gadget.txt
@@ -0,0 +1,129 @@
+Spear PCIe Gadget Driver:
+
+Author
+=============
+Pratyush Anand (pratyush.anand@st.com)
+
+Location
+============
+driver/misc/spear13xx_pcie_gadget.c
+
+Supported Chip:
+===================
+SPEAr1300
+SPEAr1310
+
+Menuconfig option:
+==========================
+Device Drivers
+	Misc devices
+		PCIe gadget support for SPEAr13XX platform
+purpose
+===========
+This driver has several nodes which can be read/written by configfs interface.
+Its main purpose is to configure selected dual mode PCIe controller as device
+and then program its various registers to configure it as a particular device
+type. This driver can be used to show spear's PCIe device capability.
+
+Description of different nodes:
+=================================
+
+read behavior of nodes:
+------------------------------
+link 		:gives ltssm status.
+int_type 	:type of supported interrupt
+no_of_msi 	:zero if MSI is not enabled by host. A positive value is the
+		number of MSI vector granted.
+vendor_id	:returns programmed vendor id (hex)
+device_id	:returns programmed device id(hex)
+bar0_size:	:returns size of bar0 in hex.
+bar0_address	:returns address of bar0 mapped area in hex.
+bar0_rw_offset	:returns offset of bar0 for which bar0_data will return value.
+bar0_data	:returns data at bar0_rw_offset.
+
+write behavior of nodes:
+------------------------------
+link 		:write UP to enable ltsmm DOWN to disable
+int_type	:write interrupt type to be configured and (int_type could be
+		INTA, MSI or NO_INT). Select MSI only when you have programmed
+		no_of_msi node.
+no_of_msi	:number of MSI vector needed.
+inta		:write 1 to assert INTA and 0 to de-assert.
+send_msi	:write MSI vector to be sent.
+vendor_id	:write vendor id(hex) to be programmed.
+device_id	:write device id(hex) to be programmed.
+bar0_size	:write size of bar0 in hex. default bar0 size is 1000 (hex)
+		bytes.
+bar0_address	:write	address of bar0 mapped area in hex. (default mapping of
+		bar0 is SYSRAM1(E0800000). Always program bar size before bar
+		address. Kernel might modify bar size and address for alignment, so
+		read back bar size and address after writing to cross check.
+bar0_rw_offset	:write offset of bar0 for which	bar0_data will write value.
+bar0_data	:write data to be written at bar0_rw_offset.
+
+Node programming example
+===========================
+Program all PCIe registers in such a way that when this device is connected
+to the PCIe host, then host sees this device as 1MB RAM.
+#mount -t configfs none /Config
+# cd /config/pcie_gadget/
+Now you have all the nodes in this directory.
+program vendor id as 0x104a
+# echo 104A >> vendor_id
+
+program device id as 0xCD80
+# echo CD80 >> device_id
+
+program BAR0 size as 1MB
+# echo 100000 >> bar0_size
+
+check for programmed bar0 size
+# cat bar0_size
+
+Program BAR0 Address as DDR (0x2100000). This is the physical address of
+memory, which is to be made visible to PCIe host. Similarly any other peripheral
+can also be made visible to PCIe host. E.g., if you program base address of UART
+as BAR0 address then when this device will be connected to a host, it will be
+visible as UART.
+# echo 2100000 >> bar0_address
+
+program interrupt type : INTA
+# echo INTA >> int_type
+
+go for link up now.
+# echo UP >> link
+
+It will have to be insured that, once link up is done on gadget, then only host
+is initialized and start to search PCIe devices on its port.
+
+/*wait till link is up*/
+# cat link
+wait till it returns UP.
+
+To assert INTA
+# echo 1 >> inta
+
+To de-assert INTA
+# echo 0 >> inta
+
+if MSI is to be used as interrupt, program no of msi vector needed (say4)
+# echo 4 >> no_of_msi
+
+select MSI as interrupt type
+# echo MSI >> int_type
+
+go for link up now
+# echo UP >> link
+
+wait till link is up
+# cat link
+An application can repetitively read this node till link is found UP. It can
+sleep between two read.
+
+wait till msi is enabled
+# cat no_of_msi
+Should return 4 (number of requested MSI vector)
+
+to send msi vector 2
+# echo 2 >> send_msi
+#cd -
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4d073f1..dea052d 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -394,6 +394,16 @@ config DS1682
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
+config SPEAR13XX_PCIE_GADGET
+	bool "PCIe gadget support for SPEAr13XX platform"
+	depends on ARCH_SPEAR13XX
+	default n
+	help
+	 This option enables gadget support for PCIe controller. If
+	 board file defines any controller as PCIe endpoint then a sysfs
+	 entry will be created for that controller. User can use these
+	 sysfs node to configure PCIe EP as per his requirements.
+
 config TI_DAC7512
 	tristate "Texas Instruments DAC7512"
 	depends on SPI && SYSFS
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 98009cc..c489536 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 obj-$(CONFIG_HMC6352)		+= hmc6352.o
 obj-y				+= eeprom/
 obj-y				+= cb710/
+obj-$(CONFIG_SPEAR13XX_PCIE_GADGET)	+= spear13xx_pcie_gadget.o
 obj-$(CONFIG_VMWARE_BALLOON)	+= vmw_balloon.o
 obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
 obj-$(CONFIG_PCH_PHUB)		+= pch_phub.o
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
new file mode 100644
index 0000000..ec3b8c9
--- /dev/null
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -0,0 +1,908 @@
+/*
+ * drivers/misc/spear13xx_pcie_gadget.c
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Pratyush Anand<pratyush.anand@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pci_regs.h>
+#include <linux/configfs.h>
+#include <mach/pcie.h>
+#include <mach/misc_regs.h>
+
+#define IN0_MEM_SIZE	(200 * 1024 * 1024 - 1)
+/* In current implementation address translation is done using IN0 only.
+ * So IN1 start address and IN0 end address has been kept same
+*/
+#define IN1_MEM_SIZE	(0 * 1024 * 1024 - 1)
+#define IN_IO_SIZE	(20 * 1024 * 1024 - 1)
+#define IN_CFG0_SIZE	(12 * 1024 * 1024 - 1)
+#define IN_CFG1_SIZE	(12 * 1024 * 1024 - 1)
+#define IN_MSG_SIZE	(12 * 1024 * 1024 - 1)
+/* Keep default BAR size as 4K*/
+/* AORAM would be mapped by default*/
+#define INBOUND_ADDR_MASK	(SPEAR13XX_SYSRAM1_SIZE - 1)
+
+#define INT_TYPE_NO_INT	0
+#define INT_TYPE_INTX	1
+#define INT_TYPE_MSI	2
+struct spear_pcie_gadget_config {
+	void __iomem *base;
+	void __iomem *va_app_base;
+	void __iomem *va_dbi_base;
+	char int_type[10];
+	ulong requested_msi;
+	ulong configured_msi;
+	ulong bar0_size;
+	ulong bar0_rw_offset;
+	void __iomem *va_bar0_address;
+};
+
+struct pcie_gadget_target {
+	struct configfs_subsystem subsys;
+	struct spear_pcie_gadget_config config;
+};
+
+struct pcie_gadget_target_attr {
+	struct configfs_attribute	attr;
+	ssize_t		(*show)(struct spear_pcie_gadget_config *config,
+						char *buf);
+	ssize_t		(*store)(struct spear_pcie_gadget_config *config,
+						 const char *buf,
+						 size_t count);
+};
+
+static void enable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+	/* Enable DBI access */
+	writel(readl(&app_reg->slv_armisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_armisc);
+	writel(readl(&app_reg->slv_awmisc) | (1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_awmisc);
+
+}
+
+static void disable_dbi_access(struct pcie_app_reg __iomem *app_reg)
+{
+	/* disable DBI access */
+	writel(readl(&app_reg->slv_armisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_armisc);
+	writel(readl(&app_reg->slv_awmisc) & ~(1 << AXI_OP_DBI_ACCESS_ID),
+			&app_reg->slv_awmisc);
+
+}
+
+static void spear_dbi_read_reg(struct spear_pcie_gadget_config *config,
+		int where, int size, u32 *val)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong va_address;
+
+	/* Enable DBI access */
+	enable_dbi_access(app_reg);
+
+	va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+	*val = readl(va_address);
+
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	/* Disable DBI access */
+	disable_dbi_access(app_reg);
+}
+
+static void spear_dbi_write_reg(struct spear_pcie_gadget_config *config,
+		int where, int size, u32 val)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong va_address;
+
+	/* Enable DBI access */
+	enable_dbi_access(app_reg);
+
+	va_address = (ulong)config->va_dbi_base + (where & ~0x3);
+
+	if (size == 4)
+		writel(val, va_address);
+	else if (size == 2)
+		writew(val, va_address + (where & 2));
+	else if (size == 1)
+		writeb(val, va_address + (where & 3));
+
+	/* Disable DBI access */
+	disable_dbi_access(app_reg);
+}
+
+#define PCI_FIND_CAP_TTL	48
+
+static int pci_find_own_next_cap_ttl(struct spear_pcie_gadget_config *config,
+		u32 pos, int cap, int *ttl)
+{
+	u32 id;
+
+	while ((*ttl)--) {
+		spear_dbi_read_reg(config, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+		pos &= ~3;
+		spear_dbi_read_reg(config, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+		pos += PCI_CAP_LIST_NEXT;
+	}
+	return 0;
+}
+
+static int pci_find_own_next_cap(struct spear_pcie_gadget_config *config,
+			u32 pos, int cap)
+{
+	int ttl = PCI_FIND_CAP_TTL;
+
+	return pci_find_own_next_cap_ttl(config, pos, cap, &ttl);
+}
+
+static int pci_find_own_cap_start(struct spear_pcie_gadget_config *config,
+				u8 hdr_type)
+{
+	u32 status;
+
+	spear_dbi_read_reg(config, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	switch (hdr_type) {
+	case PCI_HEADER_TYPE_NORMAL:
+	case PCI_HEADER_TYPE_BRIDGE:
+		return PCI_CAPABILITY_LIST;
+	case PCI_HEADER_TYPE_CARDBUS:
+		return PCI_CB_CAPABILITY_LIST;
+	default:
+		return 0;
+	}
+
+	return 0;
+}
+
+/*
+ * Tell if a device supports a given PCI capability.
+ * Returns the address of the requested capability structure within the
+ * device's PCI configuration space or 0 in case the device does not
+ * support it. Possible values for @cap:
+ *
+ * %PCI_CAP_ID_PM	Power Management
+ * %PCI_CAP_ID_AGP	Accelerated Graphics Port
+ * %PCI_CAP_ID_VPD	Vital Product Data
+ * %PCI_CAP_ID_SLOTID	Slot Identification
+ * %PCI_CAP_ID_MSI	Message Signalled Interrupts
+ * %PCI_CAP_ID_CHSWP	CompactPCI HotSwap
+ * %PCI_CAP_ID_PCIX	PCI-X
+ * %PCI_CAP_ID_EXP	PCI Express
+ */
+static int pci_find_own_capability(struct spear_pcie_gadget_config *config,
+		int cap)
+{
+	u32 pos;
+	u32 hdr_type;
+
+	spear_dbi_read_reg(config, PCI_HEADER_TYPE, 1, &hdr_type);
+
+	pos = pci_find_own_cap_start(config, hdr_type);
+	if (pos)
+		pos = pci_find_own_next_cap(config, pos, cap);
+
+	return pos;
+}
+
+static irqreturn_t spear_pcie_gadget_irq(int irq, void *dev_id)
+{
+	return 0;
+}
+
+/*
+ * configfs interfaces show/store functions
+ */
+static ssize_t pcie_gadget_show_link(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+	if (readl(&app_reg->app_status_1) & ((u32)1 << XMLH_LINK_UP_ID))
+		return sprintf(buf, "UP");
+	else
+		return sprintf(buf, "DOWN");
+}
+
+static ssize_t pcie_gadget_store_link(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+	if (sysfs_streq(buf, "UP"))
+		writel(readl(&app_reg->app_ctrl_0) | (1 << APP_LTSSM_ENABLE_ID),
+			&app_reg->app_ctrl_0);
+	else if (sysfs_streq(buf, "DOWN"))
+		writel(readl(&app_reg->app_ctrl_0)
+				& ~(1 << APP_LTSSM_ENABLE_ID),
+				&app_reg->app_ctrl_0);
+	else
+		return -EINVAL;
+	return count;
+}
+
+static ssize_t pcie_gadget_show_int_type(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	return sprintf(buf, "%s", config->int_type);
+}
+
+static ssize_t pcie_gadget_store_int_type(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	u32 cap, vec, flags;
+	ulong vector;
+
+	if (sysfs_streq(buf, "INTA"))
+		spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+
+	else if (sysfs_streq(buf, "MSI")) {
+		vector = config->requested_msi;
+		vec = 0;
+		while (vector > 1) {
+			vector /= 2;
+			vec++;
+		}
+		spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 0);
+		cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+		spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+		flags &= ~PCI_MSI_FLAGS_QMASK;
+		flags |= vec << 1;
+		spear_dbi_write_reg(config, cap + PCI_MSI_FLAGS, 1, flags);
+	} else
+		return -EINVAL;
+
+	strcpy(config->int_type, buf);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_no_of_msi(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	u32 cap, vec, flags;
+	ulong vector;
+
+	if ((readl(&app_reg->msg_status) & (1 << CFG_MSI_EN_ID))
+			!= (1 << CFG_MSI_EN_ID))
+		vector = 0;
+	else {
+		cap = pci_find_own_capability(config, PCI_CAP_ID_MSI);
+		spear_dbi_read_reg(config, cap + PCI_MSI_FLAGS, 1, &flags);
+		flags &= ~PCI_MSI_FLAGS_QSIZE;
+		vec = flags >> 4;
+		vector = 1;
+		while (vec--)
+			vector *= 2;
+	}
+	config->configured_msi = vector;
+
+	return sprintf(buf, "%lu", vector);
+}
+
+static ssize_t pcie_gadget_store_no_of_msi(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	if (strict_strtoul(buf, 0, &config->requested_msi))
+		return -EINVAL;
+	if (config->requested_msi > 32)
+		config->requested_msi = 32;
+
+	return count;
+}
+
+static ssize_t pcie_gadget_store_inta(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong en;
+
+	if (strict_strtoul(buf, 0, &en))
+		return -EINVAL;
+
+	if (en)
+		writel(readl(&app_reg->app_ctrl_0) | (1 << SYS_INT_ID),
+				&app_reg->app_ctrl_0);
+	else
+		writel(readl(&app_reg->app_ctrl_0) & ~(1 << SYS_INT_ID),
+				&app_reg->app_ctrl_0);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_store_send_msi(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong vector;
+	u32 ven_msi;
+
+	if (strict_strtoul(buf, 0, &vector))
+		return -EINVAL;
+
+	if (!config->configured_msi)
+		return -EINVAL;
+
+	if (vector >= config->configured_msi)
+		return -EINVAL;
+
+	ven_msi = readl(&app_reg->ven_msi_1);
+	ven_msi &= ~VEN_MSI_FUN_NUM_MASK;
+	ven_msi |= 0 << VEN_MSI_FUN_NUM_ID;
+	ven_msi &= ~VEN_MSI_TC_MASK;
+	ven_msi |= 0 << VEN_MSI_TC_ID;
+	ven_msi &= ~VEN_MSI_VECTOR_MASK;
+	ven_msi |= vector << VEN_MSI_VECTOR_ID;
+
+	/* generating interrupt for msi vector */
+	ven_msi |= VEN_MSI_REQ_EN;
+	writel(ven_msi, &app_reg->ven_msi_1);
+	udelay(1);
+	ven_msi &= ~VEN_MSI_REQ_EN;
+	writel(ven_msi, &app_reg->ven_msi_1);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_vendor_id(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	u32 id;
+
+	spear_dbi_read_reg(config, PCI_VENDOR_ID, 2, &id);
+
+	return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_vendor_id(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong id;
+
+	if (strict_strtoul(buf, 0, &id))
+		return -EINVAL;
+
+	spear_dbi_write_reg(config, PCI_VENDOR_ID, 2, id);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_device_id(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	u32 id;
+
+	spear_dbi_read_reg(config, PCI_DEVICE_ID, 2, &id);
+
+	return sprintf(buf, "%x", id);
+}
+
+static ssize_t pcie_gadget_store_device_id(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong id;
+
+	if (strict_strtoul(buf, 0, &id))
+		return -EINVAL;
+
+	spear_dbi_write_reg(config, PCI_DEVICE_ID, 2, id);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_size(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	return sprintf(buf, "%lx", config->bar0_size);
+}
+
+static ssize_t pcie_gadget_store_bar0_size(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong size;
+	u32 pos, pos1;
+	u32 no_of_bit = 0;
+
+	if (strict_strtoul(buf, 0, &size))
+		return -EINVAL;
+	/* min bar size is 256 */
+	if (size <= 0x100)
+		size = 0x100;
+	/* max bar size is 1MB*/
+	else if (size >= 0x100000)
+		size = 0x100000;
+	else {
+		pos = 0;
+		pos1 = 0;
+		while (pos < 21) {
+			pos = find_next_bit((ulong *)&size, 21, pos);
+			if (pos != 21)
+				pos1 = pos + 1;
+			pos++;
+			no_of_bit++;
+		}
+		if (no_of_bit == 2)
+			pos1--;
+
+		size = 1 << pos1;
+	}
+	config->bar0_size = size;
+	spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, size - 1);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_address(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+	u32 address = readl(&app_reg->pim0_mem_addr_start);
+
+	return sprintf(buf, "%x", address);
+}
+
+static ssize_t pcie_gadget_store_bar0_address(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+	ulong address;
+
+	if (strict_strtoul(buf, 0, &address))
+		return -EINVAL;
+
+	address &= ~(config->bar0_size - 1);
+	if (config->va_bar0_address)
+		iounmap(config->va_bar0_address);
+	config->va_bar0_address = ioremap(address, config->bar0_size);
+	if (!config->va_bar0_address)
+		return -ENOMEM;
+
+	writel(address, &app_reg->pim0_mem_addr_start);
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_rw_offset(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	return sprintf(buf, "%lx", config->bar0_rw_offset);
+}
+
+static ssize_t pcie_gadget_store_bar0_rw_offset(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong offset;
+
+	if (strict_strtoul(buf, 0, &offset))
+		return -EINVAL;
+
+	if (offset % 4)
+		return -EINVAL;
+
+	config->bar0_rw_offset = offset;
+
+	return count;
+}
+
+static ssize_t pcie_gadget_show_bar0_data(
+		struct spear_pcie_gadget_config *config,
+		char *buf)
+{
+	ulong data;
+
+	if (!config->va_bar0_address)
+		return -ENOMEM;
+
+	data = readl((ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+	return sprintf(buf, "%lx", data);
+}
+
+static ssize_t pcie_gadget_store_bar0_data(
+		struct spear_pcie_gadget_config *config,
+		const char *buf, size_t count)
+{
+	ulong data;
+
+	if (strict_strtoul(buf, 0, &data))
+		return -EINVAL;
+
+	if (!config->va_bar0_address)
+		return -ENOMEM;
+
+	writel(data, (ulong)config->va_bar0_address + config->bar0_rw_offset);
+
+	return count;
+}
+
+/*
+ * Attribute definitions.
+ */
+
+#define PCIE_GADGET_TARGET_ATTR_RO(_name)				\
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name =	\
+	__CONFIGFS_ATTR(_name, S_IRUGO, pcie_gadget_show_##_name, NULL)
+
+#define PCIE_GADGET_TARGET_ATTR_WO(_name)				\
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name =	\
+	__CONFIGFS_ATTR(_name, S_IWUSR, NULL, pcie_gadget_store_##_name)
+
+#define PCIE_GADGET_TARGET_ATTR_RW(_name)				\
+static struct pcie_gadget_target_attr pcie_gadget_target_##_name =	\
+	__CONFIGFS_ATTR(_name, S_IRUGO | S_IWUSR, pcie_gadget_show_##_name, \
+			pcie_gadget_store_##_name)
+PCIE_GADGET_TARGET_ATTR_RW(link);
+PCIE_GADGET_TARGET_ATTR_RW(int_type);
+PCIE_GADGET_TARGET_ATTR_RW(no_of_msi);
+PCIE_GADGET_TARGET_ATTR_WO(inta);
+PCIE_GADGET_TARGET_ATTR_WO(send_msi);
+PCIE_GADGET_TARGET_ATTR_RW(vendor_id);
+PCIE_GADGET_TARGET_ATTR_RW(device_id);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_size);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_address);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_rw_offset);
+PCIE_GADGET_TARGET_ATTR_RW(bar0_data);
+
+static struct configfs_attribute *pcie_gadget_target_attrs[] = {
+	&pcie_gadget_target_link.attr,
+	&pcie_gadget_target_int_type.attr,
+	&pcie_gadget_target_no_of_msi.attr,
+	&pcie_gadget_target_inta.attr,
+	&pcie_gadget_target_send_msi.attr,
+	&pcie_gadget_target_vendor_id.attr,
+	&pcie_gadget_target_device_id.attr,
+	&pcie_gadget_target_bar0_size.attr,
+	&pcie_gadget_target_bar0_address.attr,
+	&pcie_gadget_target_bar0_rw_offset.attr,
+	&pcie_gadget_target_bar0_data.attr,
+	NULL,
+};
+
+static struct pcie_gadget_target *to_target(struct config_item *item)
+{
+	return item ?
+		container_of(to_configfs_subsystem(to_config_group(item)),
+				struct pcie_gadget_target, subsys) : NULL;
+}
+
+/*
+ * Item operations and type for pcie_gadget_target.
+ */
+
+static ssize_t pcie_gadget_target_attr_show(struct config_item *item,
+					   struct configfs_attribute *attr,
+					   char *buf)
+{
+	ssize_t ret = -EINVAL;
+	struct pcie_gadget_target *target = to_target(item);
+	struct pcie_gadget_target_attr *t_attr =
+		container_of(attr, struct pcie_gadget_target_attr, attr);
+
+	if (t_attr->show)
+		ret = t_attr->show(&target->config, buf);
+	return ret;
+}
+
+static ssize_t pcie_gadget_target_attr_store(struct config_item *item,
+					struct configfs_attribute *attr,
+					const char *buf,
+					size_t count)
+{
+	ssize_t ret = -EINVAL;
+	struct pcie_gadget_target *target = to_target(item);
+	struct pcie_gadget_target_attr *t_attr =
+		container_of(attr, struct pcie_gadget_target_attr, attr);
+
+	if (t_attr->store)
+		ret = t_attr->store(&target->config, buf, count);
+	return ret;
+}
+
+static struct configfs_item_operations pcie_gadget_target_item_ops = {
+	.show_attribute		= pcie_gadget_target_attr_show,
+	.store_attribute	= pcie_gadget_target_attr_store,
+};
+
+static struct config_item_type pcie_gadget_target_type = {
+	.ct_attrs		= pcie_gadget_target_attrs,
+	.ct_item_ops		= &pcie_gadget_target_item_ops,
+	.ct_owner		= THIS_MODULE,
+};
+
+static void spear13xx_pcie_device_init(struct spear_pcie_gadget_config *config)
+{
+	struct pcie_app_reg __iomem *app_reg = config->va_app_base;
+
+	/*setup registers for outbound translation */
+
+	writel(config->base, &app_reg->in0_mem_addr_start);
+	writel(app_reg->in0_mem_addr_start + IN0_MEM_SIZE,
+			&app_reg->in0_mem_addr_limit);
+	writel(app_reg->in0_mem_addr_limit + 1, &app_reg->in1_mem_addr_start);
+	writel(app_reg->in1_mem_addr_start + IN1_MEM_SIZE,
+			&app_reg->in1_mem_addr_limit);
+	writel(app_reg->in1_mem_addr_limit + 1, &app_reg->in_io_addr_start);
+	writel(app_reg->in_io_addr_start + IN_IO_SIZE,
+			&app_reg->in_io_addr_limit);
+	writel(app_reg->in_io_addr_limit + 1, &app_reg->in_cfg0_addr_start);
+	writel(app_reg->in_cfg0_addr_start + IN_CFG0_SIZE,
+			&app_reg->in_cfg0_addr_limit);
+	writel(app_reg->in_cfg0_addr_limit + 1, &app_reg->in_cfg1_addr_start);
+	writel(app_reg->in_cfg1_addr_start + IN_CFG1_SIZE,
+			&app_reg->in_cfg1_addr_limit);
+	writel(app_reg->in_cfg1_addr_limit + 1, &app_reg->in_msg_addr_start);
+	writel(app_reg->in_msg_addr_start + IN_MSG_SIZE,
+			&app_reg->in_msg_addr_limit);
+
+	writel(app_reg->in0_mem_addr_start, &app_reg->pom0_mem_addr_start);
+	writel(app_reg->in1_mem_addr_start, &app_reg->pom1_mem_addr_start);
+	writel(app_reg->in_io_addr_start, &app_reg->pom_io_addr_start);
+
+	/*setup registers for inbound translation */
+
+	/* Keep AORAM mapped at BAR0 as default */
+	config->bar0_size = INBOUND_ADDR_MASK + 1;
+	spear_dbi_write_reg(config, PCIE_BAR0_MASK_REG, 4, INBOUND_ADDR_MASK);
+	spear_dbi_write_reg(config, PCI_BASE_ADDRESS_0, 4, 0xC);
+	config->va_bar0_address = ioremap(SPEAR13XX_SYSRAM1_BASE,
+			config->bar0_size);
+
+	writel(SPEAR13XX_SYSRAM1_BASE, &app_reg->pim0_mem_addr_start);
+	writel(0, &app_reg->pim1_mem_addr_start);
+	writel(INBOUND_ADDR_MASK + 1, &app_reg->mem0_addr_offset_limit);
+
+	writel(0x0, &app_reg->pim_io_addr_start);
+	writel(0x0, &app_reg->pim_io_addr_start);
+	writel(0x0, &app_reg->pim_rom_addr_start);
+
+	writel(DEVICE_TYPE_EP | (1 << MISCTRL_EN_ID)
+			| ((u32)1 << REG_TRANSLATION_ENABLE),
+			&app_reg->app_ctrl_0);
+	/* disable all rx interrupts */
+	writel(0, &app_reg->int_mask);
+
+	/* Select INTA as default*/
+	spear_dbi_write_reg(config, PCI_INTERRUPT_LINE, 1, 1);
+}
+
+static int __devinit spear_pcie_gadget_probe(struct platform_device *pdev)
+{
+	struct resource *res0, *res1;
+	unsigned int status = 0;
+	int irq;
+	struct clk *clk;
+	static struct pcie_gadget_target *target;
+	struct spear_pcie_gadget_config *config;
+	struct config_item		*cg_item;
+	struct configfs_subsystem *subsys;
+
+	/* get resource for application registers*/
+
+	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res0) {
+		dev_err(&pdev->dev, "no resource defined\n");
+		return -EBUSY;
+	}
+	if (!request_mem_region(res0->start, resource_size(res0),
+				pdev->name)) {
+		dev_err(&pdev->dev, "pcie gadget region already	claimed\n");
+		return -EBUSY;
+	}
+	/* get resource for dbi registers*/
+
+	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res1) {
+		dev_err(&pdev->dev, "no resource defined\n");
+		goto err_rel_res0;
+	}
+	if (!request_mem_region(res1->start, resource_size(res1),
+				pdev->name)) {
+		dev_err(&pdev->dev, "pcie gadget region already	claimed\n");
+		goto err_rel_res0;
+	}
+
+	target = kzalloc(sizeof(*target), GFP_KERNEL);
+	if (!target) {
+		dev_err(&pdev->dev, "out of memory\n");
+		status = -ENOMEM;
+		goto err_rel_res;
+	}
+
+	cg_item = &target->subsys.su_group.cg_item;
+	sprintf(cg_item->ci_namebuf, "pcie_gadget.%d", pdev->id);
+	cg_item->ci_type	= &pcie_gadget_target_type;
+	config = &target->config;
+	config->va_app_base = (void __iomem *)ioremap(res0->start,
+			resource_size(res0));
+	if (!config->va_app_base) {
+		dev_err(&pdev->dev, "ioremap fail\n");
+		status = -ENOMEM;
+		goto err_kzalloc;
+	}
+
+	config->base = (void __iomem *)res1->start;
+
+	config->va_dbi_base = (void __iomem *)ioremap(res1->start,
+			resource_size(res1));
+	if (!config->va_dbi_base) {
+		dev_err(&pdev->dev, "ioremap fail\n");
+		status = -ENOMEM;
+		goto err_iounmap_app;
+	}
+
+	dev_set_drvdata(&pdev->dev, target);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no update irq?\n");
+		status = irq;
+		goto err_iounmap;
+	}
+
+	status = request_irq(irq, spear_pcie_gadget_irq, 0, pdev->name, NULL);
+	if (status) {
+		dev_err(&pdev->dev, "pcie gadget interrupt IRQ%d already \
+				claimed\n", irq);
+		goto err_iounmap;
+	}
+
+	/* Register configfs hooks */
+	subsys = &target->subsys;
+	config_group_init(&subsys->su_group);
+	mutex_init(&subsys->su_mutex);
+	status = configfs_register_subsystem(subsys);
+	if (status)
+		goto err_irq;
+
+	/*
+	 * init basic pcie application registers
+	 * do not enable clock if it is PCIE0.Ideally , all controller should
+	 * have been independent from others with respect to clock. But PCIE1
+	 * and 2 depends on PCIE0.So PCIE0 clk is provided during board init.
+	 */
+	if (pdev->id == 1) {
+		/*
+		 * Ideally CFG Clock should have been also enabled here. But
+		 * it is done currently during board init routne
+		 */
+		clk = clk_get_sys("pcie1", NULL);
+		if (IS_ERR(clk)) {
+			pr_err("%s:couldn't get clk for pcie1\n", __func__);
+			goto err_irq;
+		}
+		if (clk_enable(clk)) {
+			pr_err("%s:couldn't enable clk for pcie1\n", __func__);
+			goto err_irq;
+		}
+	} else if (pdev->id == 2) {
+		/*
+		 * Ideally CFG Clock should have been also enabled here. But
+		 * it is done currently during board init routne
+		 */
+		clk = clk_get_sys("pcie2", NULL);
+		if (IS_ERR(clk)) {
+			pr_err("%s:couldn't get clk for pcie2\n", __func__);
+			goto err_irq;
+		}
+		if (clk_enable(clk)) {
+			pr_err("%s:couldn't enable clk for pcie2\n", __func__);
+			goto err_irq;
+		}
+	}
+	spear13xx_pcie_device_init(config);
+
+	return 0;
+err_irq:
+	free_irq(irq, NULL);
+err_iounmap:
+	iounmap(config->va_dbi_base);
+err_iounmap_app:
+	iounmap(config->va_app_base);
+err_kzalloc:
+	kfree(config);
+err_rel_res:
+	release_mem_region(res1->start, resource_size(res1));
+err_rel_res0:
+	release_mem_region(res0->start, resource_size(res0));
+	return status;
+}
+
+static int __devexit spear_pcie_gadget_remove(struct platform_device *pdev)
+{
+	struct resource *res0, *res1;
+	static struct pcie_gadget_target *target;
+	struct spear_pcie_gadget_config *config;
+	int irq;
+
+	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	irq = platform_get_irq(pdev, 0);
+	target = dev_get_drvdata(&pdev->dev);
+	config = &target->config;
+
+	free_irq(irq, NULL);
+	iounmap(config->va_dbi_base);
+	iounmap(config->va_app_base);
+	release_mem_region(res1->start, resource_size(res1));
+	release_mem_region(res0->start, resource_size(res0));
+	configfs_unregister_subsystem(&target->subsys);
+	kfree(target);
+
+	return 0;
+}
+
+static void spear_pcie_gadget_shutdown(struct platform_device *pdev)
+{
+}
+
+static struct platform_driver spear_pcie_gadget_driver = {
+	.probe = spear_pcie_gadget_probe,
+	.remove = spear_pcie_gadget_remove,
+	.shutdown = spear_pcie_gadget_shutdown,
+	.driver = {
+		.name = "pcie-gadget-spear",
+		.bus = &platform_bus_type
+	},
+};
+
+static int __init spear_pcie_gadget_init(void)
+{
+	return platform_driver_register(&spear_pcie_gadget_driver);
+}
+module_init(spear_pcie_gadget_init);
+
+static void __exit spear_pcie_gadget_exit(void)
+{
+	platform_driver_unregister(&spear_pcie_gadget_driver);
+}
+module_exit(spear_pcie_gadget_exit);
+
+MODULE_ALIAS("pcie-gadget-spear");
+MODULE_AUTHOR("Pratyush Anand");
+MODULE_LICENSE("GPL");
