diff mbox

[7/9] PCI: use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM)

Message ID 1371543734-14148-1-git-send-email-wangyijing@huawei.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Yijing Wang June 18, 2013, 8:22 a.m. UTC
Pci pm cap register offset has been saved in pci_pm_init(),
so we can use pdev->pm_cap instead of using pci_find_capability(..)
here.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/pci/pci.c    |    2 +-
 drivers/pci/quirks.c |    6 ++----
 2 files changed, 3 insertions(+), 5 deletions(-)

Comments

Rafael Wysocki June 18, 2013, 1:44 p.m. UTC | #1
On Tuesday, June 18, 2013 04:22:14 PM Yijing Wang wrote:
> Pci pm cap register offset has been saved in pci_pm_init(),
> so we can use pdev->pm_cap instead of using pci_find_capability(..)
> here.
> 
> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
> Cc: linux-pci@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

> ---
>  drivers/pci/pci.c    |    2 +-
>  drivers/pci/quirks.c |    6 ++----
>  2 files changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index a899d8b..1117f2c 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -805,7 +805,7 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
>  {
>  	pci_power_t ret;
>  
> -	if (!pci_find_capability(dev, PCI_CAP_ID_PM))
> +	if (!dev->pm_cap)
>  		return PCI_D0;
>  
>  	ret = platform_pci_choose_state(dev);
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 7d68aee..422812b 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -1832,7 +1832,6 @@ static void quirk_e100_interrupt(struct pci_dev *dev)
>  	u16 command, pmcsr;
>  	u8 __iomem *csr;
>  	u8 cmd_hi;
> -	int pm;
>  
>  	switch (dev->device) {
>  	/* PCI IDs taken from drivers/net/e100.c */
> @@ -1870,9 +1869,8 @@ static void quirk_e100_interrupt(struct pci_dev *dev)
>  	 * Check that the device is in the D0 power state. If it's not,
>  	 * there is no point to look any further.
>  	 */
> -	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
> -	if (pm) {
> -		pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
> +	if (dev->pm_cap) {
> +		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
>  		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
>  			return;
>  	}
>
Bjorn Helgaas June 18, 2013, 6:07 p.m. UTC | #2
On Tue, Jun 18, 2013 at 7:44 AM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Tuesday, June 18, 2013 04:22:14 PM Yijing Wang wrote:
>> Pci pm cap register offset has been saved in pci_pm_init(),
>> so we can use pdev->pm_cap instead of using pci_find_capability(..)
>> here.
>>
>> Signed-off-by: Yijing Wang <wangyijing@huawei.com>
>> Cc: linux-pci@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Applied to my pci/misc branch for v3.11, thanks!

>> ---
>>  drivers/pci/pci.c    |    2 +-
>>  drivers/pci/quirks.c |    6 ++----
>>  2 files changed, 3 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index a899d8b..1117f2c 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -805,7 +805,7 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
>>  {
>>       pci_power_t ret;
>>
>> -     if (!pci_find_capability(dev, PCI_CAP_ID_PM))
>> +     if (!dev->pm_cap)
>>               return PCI_D0;
>>
>>       ret = platform_pci_choose_state(dev);
>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>> index 7d68aee..422812b 100644
>> --- a/drivers/pci/quirks.c
>> +++ b/drivers/pci/quirks.c
>> @@ -1832,7 +1832,6 @@ static void quirk_e100_interrupt(struct pci_dev *dev)
>>       u16 command, pmcsr;
>>       u8 __iomem *csr;
>>       u8 cmd_hi;
>> -     int pm;
>>
>>       switch (dev->device) {
>>       /* PCI IDs taken from drivers/net/e100.c */
>> @@ -1870,9 +1869,8 @@ static void quirk_e100_interrupt(struct pci_dev *dev)
>>        * Check that the device is in the D0 power state. If it's not,
>>        * there is no point to look any further.
>>        */
>> -     pm = pci_find_capability(dev, PCI_CAP_ID_PM);
>> -     if (pm) {
>> -             pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
>> +     if (dev->pm_cap) {
>> +             pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
>>               if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
>>                       return;
>>       }
>>
> --
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index a899d8b..1117f2c 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -805,7 +805,7 @@  pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
 {
 	pci_power_t ret;
 
-	if (!pci_find_capability(dev, PCI_CAP_ID_PM))
+	if (!dev->pm_cap)
 		return PCI_D0;
 
 	ret = platform_pci_choose_state(dev);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 7d68aee..422812b 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1832,7 +1832,6 @@  static void quirk_e100_interrupt(struct pci_dev *dev)
 	u16 command, pmcsr;
 	u8 __iomem *csr;
 	u8 cmd_hi;
-	int pm;
 
 	switch (dev->device) {
 	/* PCI IDs taken from drivers/net/e100.c */
@@ -1870,9 +1869,8 @@  static void quirk_e100_interrupt(struct pci_dev *dev)
 	 * Check that the device is in the D0 power state. If it's not,
 	 * there is no point to look any further.
 	 */
-	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-	if (pm) {
-		pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+	if (dev->pm_cap) {
+		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
 			return;
 	}