diff mbox

[RFC,1/5] PCI: tegra: Overhaul regulator usage

Message ID 1396622969-17837-2-git-send-email-treding@nvidia.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Thierry Reding April 4, 2014, 2:49 p.m. UTC
The current usage of regulators for the Tegra PCIe block is wrong. It
doesn't accurately reflect the actual supply inputs of the IP block and
therefore isn't as flexible as it should be. Rectify this by describing
all possible supply inputs in the device tree binding documentation and
deprecate the old supply properties.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 .../bindings/pci/nvidia,tegra20-pcie.txt           | 35 ++++++++++++++++++++--
 1 file changed, 32 insertions(+), 3 deletions(-)

Comments

Stephen Warren April 8, 2014, 7:15 p.m. UTC | #1
On 04/04/2014 08:49 AM, Thierry Reding wrote:
> The current usage of regulators for the Tegra PCIe block is wrong. It
> doesn't accurately reflect the actual supply inputs of the IP block and
> therefore isn't as flexible as it should be. Rectify this by describing
> all possible supply inputs in the device tree binding documentation and
> deprecate the old supply properties.

> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt

> +Power supplies for Tegra30:
...
> +- Optional:
> +  - If port 0 is enabled:
> +    - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
> +    - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
> +  - If at least one of ports 1 and 2 is enabled:
> +    - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
> +    - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.

Did you get confirmation from HW/... that the mapping from pexa/b to
PCIe ports you document above is correct? IIRC the two supplies might be
related to lanes rather than ports?
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding April 8, 2014, 7:52 p.m. UTC | #2
On Tue, Apr 08, 2014 at 09:15:47PM +0200, Stephen Warren wrote:
> On 04/04/2014 08:49 AM, Thierry Reding wrote:
> > The current usage of regulators for the Tegra PCIe block is wrong. It
> > doesn't accurately reflect the actual supply inputs of the IP block and
> > therefore isn't as flexible as it should be. Rectify this by describing
> > all possible supply inputs in the device tree binding documentation and
> > deprecate the old supply properties.
> 
> > diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
> 
> > +Power supplies for Tegra30:
> ...
> > +- Optional:
> > +  - If port 0 is enabled:
> > +    - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
> > +    - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
> > +  - If at least one of ports 1 and 2 is enabled:
> > +    - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
> > +    - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
> 
> Did you get confirmation from HW/... that the mapping from pexa/b to
> PCIe ports you document above is correct? IIRC the two supplies might be
> related to lanes rather than ports?

Not yet, which is the primary reason this is still RFC. Just wanted to
get early feedback on the general direction of the series.

Thierry
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
index c300391e8d3e..66e8aca4aef0 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -14,9 +14,6 @@  Required properties:
 - interrupt-names: Must include the following entries:
   "intr": The Tegra interrupt that is asserted for controller interrupts
   "msi": The Tegra interrupt that is asserted when an MSI is received
-- pex-clk-supply: Supply voltage for internal reference clock
-- vdd-supply: Power supply for controller (1.05V)
-- avdd-supply: Power supply for controller (1.05V) (not required for Tegra20)
 - bus-range: Range of bus numbers associated with this controller
 - #address-cells: Address representation for root ports (must be 3)
   - cell 0 specifies the bus and device numbers of the root port:
@@ -60,6 +57,38 @@  Required properties:
   - afi
   - pcie_x
 
+Power supplies for Tegra20:
+- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+- avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+  supply 1.05 V.
+- avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+  supply 1.05 V.
+- vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V.
+
+Power supplies for Tegra30:
+- Required:
+  - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+    supply 1.05 V.
+  - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+    supply 1.05 V.
+  - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+    supply 1.8 V.
+  - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+    Must supply 3.3 V.
+- Optional:
+  - If port 0 is enabled:
+    - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+    - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - If at least one of ports 1 and 2 is enabled:
+    - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+    - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
+Deprecated supplies:
+- pex-clk-supply: Supply voltage for internal reference clock
+- vdd-supply: Power supply for controller (1.05V)
+- avdd-supply: Power supply for controller (1.05V) (not required for Tegra20)
+
 Root ports are defined as subnodes of the PCIe controller node.
 
 Required properties: