diff mbox

[v2,3/5] pci: altera: Add Altera PCIe MSI driver

Message ID 1438337715-22594-4-git-send-email-lftan@altera.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Ley Foon Tan July 31, 2015, 10:15 a.m. UTC
This patch adds Altera PCIe MSI driver. This soft IP supports configurable
number of vectors, which is a dts parameter.

Signed-off-by: Ley Foon Tan <lftan@altera.com>
---
 drivers/pci/host/Kconfig           |   7 +
 drivers/pci/host/Makefile          |   1 +
 drivers/pci/host/pcie-altera-msi.c | 324 +++++++++++++++++++++++++++++++++++++
 3 files changed, 332 insertions(+)
 create mode 100644 drivers/pci/host/pcie-altera-msi.c

Comments

Marc Zyngier July 31, 2015, 12:12 p.m. UTC | #1
On 31/07/15 11:15, Ley Foon Tan wrote:
> This patch adds Altera PCIe MSI driver. This soft IP supports configurable
> number of vectors, which is a dts parameter.

I've reviewed the initial drop of this code; basic courtesy would be to
keep me CCed on the follow-up series.

> 
> Signed-off-by: Ley Foon Tan <lftan@altera.com>
> ---
>  drivers/pci/host/Kconfig           |   7 +
>  drivers/pci/host/Makefile          |   1 +
>  drivers/pci/host/pcie-altera-msi.c | 324 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 332 insertions(+)
>  create mode 100644 drivers/pci/host/pcie-altera-msi.c
> 
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 108500a..51d0468 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -153,4 +153,11 @@ config PCIE_ALTERA
>  	  Say Y here if you want to enable PCIe controller support for Altera
>  	  SoCFPGA family of SoCs.
>  
> +config PCIE_ALTERA_MSI
> +	bool "Altera PCIe MSI feature"
> +	depends on PCI_MSI
> +	help
> +	  Say Y here if you want PCIe MSI support for the Altera SocFPGA SoC.
> +	  This MSI driver supports Altera MSI to GIC controller IP.
> +
>  endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 6954f76..6c4913d 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -18,3 +18,4 @@ obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
>  obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
>  obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
>  obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
> +obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
> diff --git a/drivers/pci/host/pcie-altera-msi.c b/drivers/pci/host/pcie-altera-msi.c
> new file mode 100644
> index 0000000..6014719
> --- /dev/null
> +++ b/drivers/pci/host/pcie-altera-msi.c
> @@ -0,0 +1,324 @@
> +/*
> + * Copyright Altera Corporation (C) 2013-2015. All rights reserved
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/interrupt.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#define MSI_STATUS		0x0
> +#define MSI_ERROR		0x4
> +#define MSI_INTMASK		0x8
> +
> +#define MAX_MSI_VECTORS		32
> +struct altera_msi {
> +	DECLARE_BITMAP(used, MAX_MSI_VECTORS);
> +	struct mutex		lock;	/* proctect used variable */
> +	struct platform_device	*pdev;
> +	struct irq_domain		*msi_domain;
> +	struct irq_domain		*inner_domain;
> +	void __iomem		*csr_base;
> +	void __iomem		*vector_base;
> +	phys_addr_t		vector_phy;
> +	u32			num_of_vectors;
> +	int			irq;
> +};
> +
> +static inline void msi_writel(struct altera_msi *msi, u32 value, u32 reg)
> +{
> +	writel_relaxed(value, msi->csr_base + reg);
> +}
> +
> +static inline u32 msi_readl(struct altera_msi *msi, u32 reg)
> +{
> +	return readl_relaxed(msi->csr_base + reg);
> +}
> +
> +static void altera_msi_isr(unsigned int irq, struct irq_desc *desc)
> +{
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +	struct altera_msi *msi;
> +	unsigned long status;
> +	u32 num_of_vectors;
> +	u32 bit;
> +
> +	chained_irq_enter(chip, desc);
> +	msi = irq_desc_get_handler_data(desc);
> +	num_of_vectors = msi->num_of_vectors;
> +
> +	do {
> +		status = msi_readl(msi, MSI_STATUS);
> +		if (!status)
> +			break;
> +
> +		do {
> +			bit = find_first_bit(&status, num_of_vectors);
> +			/* Dummy read from vector to clear the interrupt */
> +			readl_relaxed(msi->vector_base + (bit * sizeof(u32)));
> +
> +			irq = irq_find_mapping(msi->inner_domain, bit);

Use of irq is a bit confusing, as this is a parameter describing the
chaining interrupt. Consider using a different name for this variable.

> +			if (irq) {
> +				if (test_bit(bit, msi->used))
> +					generic_handle_irq(irq);
> +				else
> +					dev_info(&msi->pdev->dev, "unhandled MSI\n");
> +			} else
> +				dev_info(&msi->pdev->dev, "unexpected MSI\n");

The whole statement could be rewritten as:

if (irq && test_bit(bit, msi->used))
	generic_handle_irq(irq);
else
	dev_err(...);

In all cases, this is a grave error, so dev_info is not appropriate here.

> +
> +			/* Clear the bit from status and repeat without reading
> +			 * again status register. */
> +			clear_bit(bit, &status);

You don't need an atomic operation here, so __clear_bit() should be enough.

> +		} while (status);
> +	} while (1);
> +
> +	chained_irq_exit(chip, desc);
> +}
> +
> +static struct irq_chip altera_msi_irq_chip = {
> +	.name = "Altera PCIe MSI",
> +	.irq_enable = pci_msi_unmask_irq,
> +	.irq_disable = pci_msi_mask_irq,
> +	.irq_mask = pci_msi_mask_irq,
> +	.irq_unmask = pci_msi_unmask_irq,
> +};
> +
> +static struct msi_domain_info altera_msi_domain_info = {
> +	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
> +		     MSI_FLAG_PCI_MSIX),
> +	.chip	= &altera_msi_irq_chip,
> +};
> +
> +static void altera_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> +{
> +	u32 mask;
> +	struct altera_msi *msi = irq_data_get_irq_chip_data(data);
> +	u64 addr = msi->vector_phy + (data->hwirq * sizeof(u32));

Use phys_addr_t.

> +
> +	msg->address_lo = lower_32_bits(addr);
> +	msg->address_hi = upper_32_bits(addr);
> +	msg->data = data->hwirq;
> +
> +	mask = msi_readl(msi, MSI_INTMASK);
> +	mask |= 1 << data->hwirq;
> +	msi_writel(msi, mask, MSI_INTMASK);

It feels a bit weird to unmask the interrupt when you compose the
message. I'd expect this to be done in the mask/unmask methods.

> +	dev_dbg(&msi->pdev->dev, "msi#%d address_lo 0x%x\n", (int)data->hwirq,
> +		msg->address_lo);

You may want to print the whole address here.

> +}
> +
> +static int altera_msi_set_affinity(struct irq_data *irq_data,
> +				 const struct cpumask *mask, bool force)
> +{
> +	 return -EINVAL;
> +}
> +
> +static struct irq_chip altera_msi_bottom_irq_chip = {
> +	.name			= "Altera MSI",
> +	.irq_compose_msi_msg	= altera_compose_msi_msg,
> +	.irq_set_affinity	= altera_msi_set_affinity,
> +};
> +
> +static int altera_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> +				  unsigned int nr_irqs, void *args)
> +{
> +	struct altera_msi *msi = domain->host_data;
> +	int bit;
> +
> +	mutex_lock(&msi->lock);
> +
> +	bit = find_first_zero_bit(msi->used, msi->num_of_vectors);
> +	if (bit < msi->num_of_vectors)
> +		set_bit(bit, msi->used);
> +
> +	mutex_unlock(&msi->lock);
> +
> +	if (bit < 0)
> +		return bit;

How can "bit" be negative here? find_first_zero_bit returns an unsigned
long... You probably want to change the type of "bit" to reflect that.

> +	else if (bit >= msi->num_of_vectors)

Useless "else" anyway.

> +		return -ENOSPC;
> +
> +	irq_domain_set_info(domain, virq, bit, &altera_msi_bottom_irq_chip,
> +			    domain->host_data, handle_simple_irq,
> +			    NULL, NULL);
> +	set_irq_flags(virq, IRQF_VALID);
> +
> +	return 0;
> +}
> +
> +static void altera_irq_domain_free(struct irq_domain *domain,
> +				  unsigned int virq, unsigned int nr_irqs)
> +{
> +	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
> +	struct altera_msi *msi = irq_data_get_irq_chip_data(d);
> +	u32 mask;
> +
> +	mutex_lock(&msi->lock);
> +
> +	if (!test_bit(d->hwirq, msi->used))
> +		dev_err(&msi->pdev->dev, "trying to free unused MSI#%lu\n",
> +		d->hwirq);

Put this statement in { } so that it matches the "else" construct.

> +	else {
> +		clear_bit(d->hwirq, msi->used);

No need for an atomic operation here, you own the mutex.

> +		mask = msi_readl(msi, MSI_INTMASK);
> +		mask &= ~(1 << d->hwirq);
> +		msi_writel(msi, mask, MSI_INTMASK);
> +	}
> +
> +	mutex_unlock(&msi->lock);
> +}
> +
> +static const struct irq_domain_ops msi_domain_ops = {
> +	.alloc	= altera_irq_domain_alloc,
> +	.free	= altera_irq_domain_free,
> +};
> +
> +static int altera_allocate_domains(struct altera_msi *msi)
> +{
> +	msi->inner_domain = irq_domain_add_linear(NULL, msi->num_of_vectors,
> +					     &msi_domain_ops, msi);
> +	if (!msi->inner_domain) {
> +		dev_err(&msi->pdev->dev, "failed to create IRQ domain\n");
> +		return -ENOMEM;
> +	}
> +
> +	msi->msi_domain = pci_msi_create_irq_domain(
> +				msi->pdev->dev.of_node,

Please put at least one argument to the function on the same line. This
is otherwise very hard to read.

> +				&altera_msi_domain_info, msi->inner_domain);
> +	if (!msi->msi_domain) {
> +		dev_err(&msi->pdev->dev, "failed to create MSI domain\n");
> +		irq_domain_remove(msi->inner_domain);
> +		return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +
> +static void altera_free_domains(struct altera_msi *msi)
> +{
> +	irq_domain_remove(msi->msi_domain);
> +	irq_domain_remove(msi->inner_domain);
> +}
> +
> +
> +static int altera_msi_remove(struct platform_device *pdev)
> +{
> +	struct altera_msi *msi = platform_get_drvdata(pdev);
> +
> +	msi_writel(msi, 0, MSI_INTMASK);
> +	irq_set_chained_handler(msi->irq, NULL);
> +	irq_set_handler_data(msi->irq, NULL);
> +
> +	altera_free_domains(msi);
> +
> +	platform_set_drvdata(pdev, NULL);
> +	return 0;
> +}
> +
> +int altera_msi_probe(struct platform_device *pdev)

Make this static.

> +{
> +	struct altera_msi *msi;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct resource *res;
> +	int ret;
> +
> +	msi = devm_kzalloc(&pdev->dev, sizeof(struct altera_msi),
> +		GFP_KERNEL);
> +	if (!msi)
> +		return -ENOMEM;
> +
> +	mutex_init(&msi->lock);
> +	msi->pdev = pdev;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr");
> +	msi->csr_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(msi->csr_base)) {
> +		dev_err(&pdev->dev, "get csr resource failed\n");
> +		return PTR_ERR(msi->csr_base);
> +	}
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> +			"vector_slave");
> +	msi->vector_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(msi->vector_base)) {
> +		dev_err(&pdev->dev, "get vector slave resource failed\n");
> +		return PTR_ERR(msi->vector_base);
> +	}
> +
> +	msi->vector_phy = res->start;
> +
> +	if (of_property_read_u32(np, "num-vectors", &msi->num_of_vectors)) {
> +		dev_err(&pdev->dev, "failed to parse the number of vectors\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = altera_allocate_domains(msi);
> +	if (ret)
> +		return ret;
> +
> +	msi->irq = platform_get_irq(pdev, 0);
> +	if (msi->irq <= 0) {
> +		dev_err(&pdev->dev, "failed to map IRQ: %d\n", msi->irq);
> +		ret = -ENODEV;
> +		goto err;
> +	}
> +
> +	irq_set_chained_handler(msi->irq, altera_msi_isr);
> +	ret = irq_set_handler_data(msi->irq, msi);

Use irq_set_chained_handler_and_data.

> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to register IRQ handler: %d\n",
> +			ret);
> +		goto err;
> +	}
> +
> +	platform_set_drvdata(pdev, msi);
> +
> +	return 0;
> +
> +err:
> +	altera_msi_remove(pdev);
> +	return ret;
> +}
> +
> +static const struct of_device_id altera_msi_of_match[] = {
> +	{ .compatible = "altr,msi-1.0", NULL },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, altera_msi_of_match);
> +
> +static struct platform_driver altera_msi_driver = {
> +	.driver = {
> +		.name = "altera-msi",
> +		.owner = THIS_MODULE,

Remove this .owner assignment, the core code deals with it.

> +		.of_match_table = altera_msi_of_match,
> +	},
> +	.probe = altera_msi_probe,
> +	.remove = altera_msi_remove,
> +};
> +
> +static int __init altera_msi_init(void)
> +{
> +	return platform_driver_register(&altera_msi_driver);
> +}
> +
> +subsys_initcall(altera_msi_init);

Hmmm. if you're initializing this as part of the core kernel, it will
never be a module. What is the point of the MODULE_DEVICE_TABLE above?

> +
> +MODULE_AUTHOR("Ley Foon Tan <lftan@altera.com>");
> +MODULE_DESCRIPTION("Altera PCIe MSI support");
> +MODULE_LICENSE("GPL v2");
> 

Thanks,

	M.
Ley Foon Tan Aug. 3, 2015, 10:37 a.m. UTC | #2
On Fri, Jul 31, 2015 at 8:12 PM, Marc Zyngier <marc.zyngier@arm.com> wrote:
> On 31/07/15 11:15, Ley Foon Tan wrote:
>> This patch adds Altera PCIe MSI driver. This soft IP supports configurable
>> number of vectors, which is a dts parameter.
>
> I've reviewed the initial drop of this code; basic courtesy would be to
> keep me CCed on the follow-up series.
Will keep you in CC for the following revision. Sorry about this.

>>
>> Signed-off-by: Ley Foon Tan <lftan@altera.com>
>> ---
>>  drivers/pci/host/Kconfig           |   7 +
>>  drivers/pci/host/Makefile          |   1 +
>>  drivers/pci/host/pcie-altera-msi.c | 324 +++++++++++++++++++++++++++++++++++++
>>  3 files changed, 332 insertions(+)
>>  create mode 100644 drivers/pci/host/pcie-altera-msi.c
>>
>> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
>> index 108500a..51d0468 100644
>> --- a/drivers/pci/host/Kconfig
>> +++ b/drivers/pci/host/Kconfig
>> @@ -153,4 +153,11 @@ config PCIE_ALTERA
>>         Say Y here if you want to enable PCIe controller support for Altera
>>         SoCFPGA family of SoCs.
>>
>> +config PCIE_ALTERA_MSI
>> +     bool "Altera PCIe MSI feature"
>> +     depends on PCI_MSI
>> +     help
>> +       Say Y here if you want PCIe MSI support for the Altera SocFPGA SoC.
>> +       This MSI driver supports Altera MSI to GIC controller IP.
>> +
>>  endmenu
>> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
>> index 6954f76..6c4913d 100644
>> --- a/drivers/pci/host/Makefile
>> +++ b/drivers/pci/host/Makefile
>> @@ -18,3 +18,4 @@ obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
>>  obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
>>  obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
>>  obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
>> +obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
>> diff --git a/drivers/pci/host/pcie-altera-msi.c b/drivers/pci/host/pcie-altera-msi.c
>> new file mode 100644
>> index 0000000..6014719
>> --- /dev/null
>> +++ b/drivers/pci/host/pcie-altera-msi.c
>> @@ -0,0 +1,324 @@
>> +/*
>> + * Copyright Altera Corporation (C) 2013-2015. All rights reserved
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * You should have received a copy of the GNU General Public License along with
>> + * this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/interrupt.h>
>> +#include <linux/irqchip/chained_irq.h>
>> +#include <linux/module.h>
>> +#include <linux/msi.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_pci.h>
>> +#include <linux/pci.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +
>> +#define MSI_STATUS           0x0
>> +#define MSI_ERROR            0x4
>> +#define MSI_INTMASK          0x8
>> +
>> +#define MAX_MSI_VECTORS              32
>> +struct altera_msi {
>> +     DECLARE_BITMAP(used, MAX_MSI_VECTORS);
>> +     struct mutex            lock;   /* proctect used variable */
>> +     struct platform_device  *pdev;
>> +     struct irq_domain               *msi_domain;
>> +     struct irq_domain               *inner_domain;
>> +     void __iomem            *csr_base;
>> +     void __iomem            *vector_base;
>> +     phys_addr_t             vector_phy;
>> +     u32                     num_of_vectors;
>> +     int                     irq;
>> +};
>> +
>> +static inline void msi_writel(struct altera_msi *msi, u32 value, u32 reg)
>> +{
>> +     writel_relaxed(value, msi->csr_base + reg);
>> +}
>> +
>> +static inline u32 msi_readl(struct altera_msi *msi, u32 reg)
>> +{
>> +     return readl_relaxed(msi->csr_base + reg);
>> +}
>> +
>> +static void altera_msi_isr(unsigned int irq, struct irq_desc *desc)
>> +{
>> +     struct irq_chip *chip = irq_desc_get_chip(desc);
>> +     struct altera_msi *msi;
>> +     unsigned long status;
>> +     u32 num_of_vectors;
>> +     u32 bit;
>> +
>> +     chained_irq_enter(chip, desc);
>> +     msi = irq_desc_get_handler_data(desc);
>> +     num_of_vectors = msi->num_of_vectors;
>> +
>> +     do {
>> +             status = msi_readl(msi, MSI_STATUS);
>> +             if (!status)
>> +                     break;
>> +
>> +             do {
>> +                     bit = find_first_bit(&status, num_of_vectors);
>> +                     /* Dummy read from vector to clear the interrupt */
>> +                     readl_relaxed(msi->vector_base + (bit * sizeof(u32)));
>> +
>> +                     irq = irq_find_mapping(msi->inner_domain, bit);
>
> Use of irq is a bit confusing, as this is a parameter describing the
> chaining interrupt. Consider using a different name for this variable.
Okay, will change it to 'virq'.

>
>> +                     if (irq) {
>> +                             if (test_bit(bit, msi->used))
>> +                                     generic_handle_irq(irq);
>> +                             else
>> +                                     dev_info(&msi->pdev->dev, "unhandled MSI\n");
>> +                     } else
>> +                             dev_info(&msi->pdev->dev, "unexpected MSI\n");
>
> The whole statement could be rewritten as:
>
> if (irq && test_bit(bit, msi->used))
>         generic_handle_irq(irq);
> else
>         dev_err(...);
>
> In all cases, this is a grave error, so dev_info is not appropriate here.
Noted.

>
>> +
>> +                     /* Clear the bit from status and repeat without reading
>> +                      * again status register. */
>> +                     clear_bit(bit, &status);
>
> You don't need an atomic operation here, so __clear_bit() should be enough.
Noted.

>
>> +             } while (status);
>> +     } while (1);
>> +
>> +     chained_irq_exit(chip, desc);
>> +}
>> +
>> +static struct irq_chip altera_msi_irq_chip = {
>> +     .name = "Altera PCIe MSI",
>> +     .irq_enable = pci_msi_unmask_irq,
>> +     .irq_disable = pci_msi_mask_irq,
>> +     .irq_mask = pci_msi_mask_irq,
>> +     .irq_unmask = pci_msi_unmask_irq,
>> +};
>> +
>> +static struct msi_domain_info altera_msi_domain_info = {
>> +     .flags  = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
>> +                  MSI_FLAG_PCI_MSIX),
>> +     .chip   = &altera_msi_irq_chip,
>> +};
>> +
>> +static void altera_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
>> +{
>> +     u32 mask;
>> +     struct altera_msi *msi = irq_data_get_irq_chip_data(data);
>> +     u64 addr = msi->vector_phy + (data->hwirq * sizeof(u32));
>
> Use phys_addr_t.
Noted.

>
>> +
>> +     msg->address_lo = lower_32_bits(addr);
>> +     msg->address_hi = upper_32_bits(addr);
>> +     msg->data = data->hwirq;
>> +
>> +     mask = msi_readl(msi, MSI_INTMASK);
>> +     mask |= 1 << data->hwirq;
>> +     msi_writel(msi, mask, MSI_INTMASK);
>
> It feels a bit weird to unmask the interrupt when you compose the
> message. I'd expect this to be done in the mask/unmask methods.
Do you refer to these 2 callbacks?
.irq_mask = pci_msi_mask_irq,
.irq_unmask = pci_msi_unmask_irq,

How about we move this INTMASK code above to altera_irq_domain_alloc()?
We have unmask code in altera_irq_domain_free() now.

>
>> +     dev_dbg(&msi->pdev->dev, "msi#%d address_lo 0x%x\n", (int)data->hwirq,
>> +             msg->address_lo);
>
> You may want to print the whole address here.
Noted.

>
>> +}
>> +
>> +static int altera_msi_set_affinity(struct irq_data *irq_data,
>> +                              const struct cpumask *mask, bool force)
>> +{
>> +      return -EINVAL;
>> +}
>> +
>> +static struct irq_chip altera_msi_bottom_irq_chip = {
>> +     .name                   = "Altera MSI",
>> +     .irq_compose_msi_msg    = altera_compose_msi_msg,
>> +     .irq_set_affinity       = altera_msi_set_affinity,
>> +};
>> +
>> +static int altera_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
>> +                               unsigned int nr_irqs, void *args)
>> +{
>> +     struct altera_msi *msi = domain->host_data;
>> +     int bit;
>> +
>> +     mutex_lock(&msi->lock);
>> +
>> +     bit = find_first_zero_bit(msi->used, msi->num_of_vectors);
>> +     if (bit < msi->num_of_vectors)
>> +             set_bit(bit, msi->used);
>> +
>> +     mutex_unlock(&msi->lock);
>> +
>> +     if (bit < 0)
>> +             return bit;
>
> How can "bit" be negative here? find_first_zero_bit returns an unsigned
> long... You probably want to change the type of "bit" to reflect that.
Okay, will change to "unsigned long" type.
>
>> +     else if (bit >= msi->num_of_vectors)
>
> Useless "else" anyway.

I think we still need to check for failing case, if we don't have
available unused bit.
This could be rewritten  as below:

bit = find_first_zero_bit(msi->used, msi->num_of_vectors);
if (bit < msi->num_of_vectors)
      set_bit(bit, msi->used);
else
      return -ENOSPC;

>
>> +             return -ENOSPC;
>> +
>> +     irq_domain_set_info(domain, virq, bit, &altera_msi_bottom_irq_chip,
>> +                         domain->host_data, handle_simple_irq,
>> +                         NULL, NULL);
>> +     set_irq_flags(virq, IRQF_VALID);
>> +
>> +     return 0;
>> +}
>> +
>> +static void altera_irq_domain_free(struct irq_domain *domain,
>> +                               unsigned int virq, unsigned int nr_irqs)
>> +{
>> +     struct irq_data *d = irq_domain_get_irq_data(domain, virq);
>> +     struct altera_msi *msi = irq_data_get_irq_chip_data(d);
>> +     u32 mask;
>> +
>> +     mutex_lock(&msi->lock);
>> +
>> +     if (!test_bit(d->hwirq, msi->used))
>> +             dev_err(&msi->pdev->dev, "trying to free unused MSI#%lu\n",
>> +             d->hwirq);
>
> Put this statement in { } so that it matches the "else" construct.
Noted.

>
>> +     else {
>> +             clear_bit(d->hwirq, msi->used);
>
> No need for an atomic operation here, you own the mutex.
Okay, change to __clear_bit.


>
>> +             mask = msi_readl(msi, MSI_INTMASK);
>> +             mask &= ~(1 << d->hwirq);
>> +             msi_writel(msi, mask, MSI_INTMASK);
>> +     }
>> +
>> +     mutex_unlock(&msi->lock);
>> +}
>> +
>> +static const struct irq_domain_ops msi_domain_ops = {
>> +     .alloc  = altera_irq_domain_alloc,
>> +     .free   = altera_irq_domain_free,
>> +};
>> +
>> +static int altera_allocate_domains(struct altera_msi *msi)
>> +{
>> +     msi->inner_domain = irq_domain_add_linear(NULL, msi->num_of_vectors,
>> +                                          &msi_domain_ops, msi);
>> +     if (!msi->inner_domain) {
>> +             dev_err(&msi->pdev->dev, "failed to create IRQ domain\n");
>> +             return -ENOMEM;
>> +     }
>> +
>> +     msi->msi_domain = pci_msi_create_irq_domain(
>> +                             msi->pdev->dev.of_node,
>
> Please put at least one argument to the function on the same line. This
> is otherwise very hard to read.
Okay.

>
>> +                             &altera_msi_domain_info, msi->inner_domain);
>> +     if (!msi->msi_domain) {
>> +             dev_err(&msi->pdev->dev, "failed to create MSI domain\n");
>> +             irq_domain_remove(msi->inner_domain);
>> +             return -ENOMEM;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +static void altera_free_domains(struct altera_msi *msi)
>> +{
>> +     irq_domain_remove(msi->msi_domain);
>> +     irq_domain_remove(msi->inner_domain);
>> +}
>> +
>> +
>> +static int altera_msi_remove(struct platform_device *pdev)
>> +{
>> +     struct altera_msi *msi = platform_get_drvdata(pdev);
>> +
>> +     msi_writel(msi, 0, MSI_INTMASK);
>> +     irq_set_chained_handler(msi->irq, NULL);
>> +     irq_set_handler_data(msi->irq, NULL);
>> +
>> +     altera_free_domains(msi);
>> +
>> +     platform_set_drvdata(pdev, NULL);
>> +     return 0;
>> +}
>> +
>> +int altera_msi_probe(struct platform_device *pdev)
>
> Make this static.
Okay.

>
>> +{
>> +     struct altera_msi *msi;
>> +     struct device_node *np = pdev->dev.of_node;
>> +     struct resource *res;
>> +     int ret;
>> +
>> +     msi = devm_kzalloc(&pdev->dev, sizeof(struct altera_msi),
>> +             GFP_KERNEL);
>> +     if (!msi)
>> +             return -ENOMEM;
>> +
>> +     mutex_init(&msi->lock);
>> +     msi->pdev = pdev;
>> +
>> +     res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr");
>> +     msi->csr_base = devm_ioremap_resource(&pdev->dev, res);
>> +     if (IS_ERR(msi->csr_base)) {
>> +             dev_err(&pdev->dev, "get csr resource failed\n");
>> +             return PTR_ERR(msi->csr_base);
>> +     }
>> +
>> +     res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>> +                     "vector_slave");
>> +     msi->vector_base = devm_ioremap_resource(&pdev->dev, res);
>> +     if (IS_ERR(msi->vector_base)) {
>> +             dev_err(&pdev->dev, "get vector slave resource failed\n");
>> +             return PTR_ERR(msi->vector_base);
>> +     }
>> +
>> +     msi->vector_phy = res->start;
>> +
>> +     if (of_property_read_u32(np, "num-vectors", &msi->num_of_vectors)) {
>> +             dev_err(&pdev->dev, "failed to parse the number of vectors\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     ret = altera_allocate_domains(msi);
>> +     if (ret)
>> +             return ret;
>> +
>> +     msi->irq = platform_get_irq(pdev, 0);
>> +     if (msi->irq <= 0) {
>> +             dev_err(&pdev->dev, "failed to map IRQ: %d\n", msi->irq);
>> +             ret = -ENODEV;
>> +             goto err;
>> +     }
>> +
>> +     irq_set_chained_handler(msi->irq, altera_msi_isr);
>> +     ret = irq_set_handler_data(msi->irq, msi);
>
> Use irq_set_chained_handler_and_data.
Okay.

>
>> +     if (ret) {
>> +             dev_err(&pdev->dev, "failed to register IRQ handler: %d\n",
>> +                     ret);
>> +             goto err;
>> +     }
>> +
>> +     platform_set_drvdata(pdev, msi);
>> +
>> +     return 0;
>> +
>> +err:
>> +     altera_msi_remove(pdev);
>> +     return ret;
>> +}
>> +
>> +static const struct of_device_id altera_msi_of_match[] = {
>> +     { .compatible = "altr,msi-1.0", NULL },
>> +     { },
>> +};
>> +MODULE_DEVICE_TABLE(of, altera_msi_of_match);
>> +
>> +static struct platform_driver altera_msi_driver = {
>> +     .driver = {
>> +             .name = "altera-msi",
>> +             .owner = THIS_MODULE,
>
> Remove this .owner assignment, the core code deals with it.
Okay.

>
>> +             .of_match_table = altera_msi_of_match,
>> +     },
>> +     .probe = altera_msi_probe,
>> +     .remove = altera_msi_remove,
>> +};
>> +
>> +static int __init altera_msi_init(void)
>> +{
>> +     return platform_driver_register(&altera_msi_driver);
>> +}
>> +
>> +subsys_initcall(altera_msi_init);
>
> Hmmm. if you're initializing this as part of the core kernel, it will
> never be a module. What is the point of the MODULE_DEVICE_TABLE above?
Okay, will remove MODULE_DEVICE_TABLE.

Thanks for reviewing.

Regards
Ley Foon
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Marc Zyngier Aug. 3, 2015, 10:53 a.m. UTC | #3
On 03/08/15 11:37, Ley Foon Tan wrote:
> On Fri, Jul 31, 2015 at 8:12 PM, Marc Zyngier <marc.zyngier@arm.com> wrote:
>> On 31/07/15 11:15, Ley Foon Tan wrote:
>>> This patch adds Altera PCIe MSI driver. This soft IP supports configurable
>>> number of vectors, which is a dts parameter.
>>
>> I've reviewed the initial drop of this code; basic courtesy would be to
>> keep me CCed on the follow-up series.
> Will keep you in CC for the following revision. Sorry about this.
> 
>>>
>>> Signed-off-by: Ley Foon Tan <lftan@altera.com>
>>> ---
>>>  drivers/pci/host/Kconfig           |   7 +
>>>  drivers/pci/host/Makefile          |   1 +
>>>  drivers/pci/host/pcie-altera-msi.c | 324 +++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 332 insertions(+)
>>>  create mode 100644 drivers/pci/host/pcie-altera-msi.c
>>>

[...]

>>> +
>>> +     msg->address_lo = lower_32_bits(addr);
>>> +     msg->address_hi = upper_32_bits(addr);
>>> +     msg->data = data->hwirq;
>>> +
>>> +     mask = msi_readl(msi, MSI_INTMASK);
>>> +     mask |= 1 << data->hwirq;
>>> +     msi_writel(msi, mask, MSI_INTMASK);
>>
>> It feels a bit weird to unmask the interrupt when you compose the
>> message. I'd expect this to be done in the mask/unmask methods.
> Do you refer to these 2 callbacks?
> .irq_mask = pci_msi_mask_irq,
> .irq_unmask = pci_msi_unmask_irq,
> 
> How about we move this INTMASK code above to altera_irq_domain_alloc()?
> We have unmask code in altera_irq_domain_free() now.

Either you move the mask/unmask code to local irq_mask/irq_unmask
methods (and call pci_msi_(un)mask_irq from there), or you move it
entierely to alloc/free.

Some level of symmetry helps following what is going on in the code.

[...]

>>> +static int altera_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
>>> +                               unsigned int nr_irqs, void *args)
>>> +{
>>> +     struct altera_msi *msi = domain->host_data;
>>> +     int bit;
>>> +
>>> +     mutex_lock(&msi->lock);
>>> +
>>> +     bit = find_first_zero_bit(msi->used, msi->num_of_vectors);
>>> +     if (bit < msi->num_of_vectors)
>>> +             set_bit(bit, msi->used);
>>> +
>>> +     mutex_unlock(&msi->lock);
>>> +
>>> +     if (bit < 0)
>>> +             return bit;
>>
>> How can "bit" be negative here? find_first_zero_bit returns an unsigned
>> long... You probably want to change the type of "bit" to reflect that.
> Okay, will change to "unsigned long" type.
>>
>>> +     else if (bit >= msi->num_of_vectors)
>>
>> Useless "else" anyway.
> 
> I think we still need to check for failing case, if we don't have
> available unused bit.
> This could be rewritten  as below:
> 
> bit = find_first_zero_bit(msi->used, msi->num_of_vectors);
> if (bit < msi->num_of_vectors)
>       set_bit(bit, msi->used);
> else
>       return -ENOSPC;

The more logical to write this is:

	if (bit >= msi->num_of_vectors)
		return -ENOSPC;

	set_bit(bit, msi->used);

which gets rid of the error case early and streamlines the normal case.

> 
>>
>>> +             return -ENOSPC;
>>> +
>>> +     irq_domain_set_info(domain, virq, bit, &altera_msi_bottom_irq_chip,
>>> +                         domain->host_data, handle_simple_irq,
>>> +                         NULL, NULL);
>>> +     set_irq_flags(virq, IRQF_VALID);
>>> +
>>> +     return 0;
>>> +}

Thanks,

	M.
Ley Foon Tan Aug. 3, 2015, 11 a.m. UTC | #4
On Mon, Aug 3, 2015 at 6:53 PM, Marc Zyngier <marc.zyngier@arm.com> wrote:
> On 03/08/15 11:37, Ley Foon Tan wrote:

>>>> +     msg->address_lo = lower_32_bits(addr);
>>>> +     msg->address_hi = upper_32_bits(addr);
>>>> +     msg->data = data->hwirq;
>>>> +
>>>> +     mask = msi_readl(msi, MSI_INTMASK);
>>>> +     mask |= 1 << data->hwirq;
>>>> +     msi_writel(msi, mask, MSI_INTMASK);
>>>
>>> It feels a bit weird to unmask the interrupt when you compose the
>>> message. I'd expect this to be done in the mask/unmask methods.
>> Do you refer to these 2 callbacks?
>> .irq_mask = pci_msi_mask_irq,
>> .irq_unmask = pci_msi_unmask_irq,
>>
>> How about we move this INTMASK code above to altera_irq_domain_alloc()?
>> We have unmask code in altera_irq_domain_free() now.
>
> Either you move the mask/unmask code to local irq_mask/irq_unmask
> methods (and call pci_msi_(un)mask_irq from there), or you move it
> entierely to alloc/free.
>
> Some level of symmetry helps following what is going on in the code.
Okay, will move it to alloc/free.
>
> [...]
>
>>>> +static int altera_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
>>>> +                               unsigned int nr_irqs, void *args)
>>>> +{
>>>> +     struct altera_msi *msi = domain->host_data;
>>>> +     int bit;
>>>> +
>>>> +     mutex_lock(&msi->lock);
>>>> +
>>>> +     bit = find_first_zero_bit(msi->used, msi->num_of_vectors);
>>>> +     if (bit < msi->num_of_vectors)
>>>> +             set_bit(bit, msi->used);
>>>> +
>>>> +     mutex_unlock(&msi->lock);
>>>> +
>>>> +     if (bit < 0)
>>>> +             return bit;
>>>
>>> How can "bit" be negative here? find_first_zero_bit returns an unsigned
>>> long... You probably want to change the type of "bit" to reflect that.
>> Okay, will change to "unsigned long" type.
>>>
>>>> +     else if (bit >= msi->num_of_vectors)
>>>
>>> Useless "else" anyway.
>>
>> I think we still need to check for failing case, if we don't have
>> available unused bit.
>> This could be rewritten  as below:
>>
>> bit = find_first_zero_bit(msi->used, msi->num_of_vectors);
>> if (bit < msi->num_of_vectors)
>>       set_bit(bit, msi->used);
>> else
>>       return -ENOSPC;
>
> The more logical to write this is:
>
>         if (bit >= msi->num_of_vectors)
>                 return -ENOSPC;
>
>         set_bit(bit, msi->used);
>
> which gets rid of the error case early and streamlines the normal case.
Yes, will change to this way.

Thanks.

Regards
Ley Foon
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 108500a..51d0468 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -153,4 +153,11 @@  config PCIE_ALTERA
 	  Say Y here if you want to enable PCIe controller support for Altera
 	  SoCFPGA family of SoCs.
 
+config PCIE_ALTERA_MSI
+	bool "Altera PCIe MSI feature"
+	depends on PCI_MSI
+	help
+	  Say Y here if you want PCIe MSI support for the Altera SocFPGA SoC.
+	  This MSI driver supports Altera MSI to GIC controller IP.
+
 endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 6954f76..6c4913d 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -18,3 +18,4 @@  obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
 obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
 obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
+obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
diff --git a/drivers/pci/host/pcie-altera-msi.c b/drivers/pci/host/pcie-altera-msi.c
new file mode 100644
index 0000000..6014719
--- /dev/null
+++ b/drivers/pci/host/pcie-altera-msi.c
@@ -0,0 +1,324 @@ 
+/*
+ * Copyright Altera Corporation (C) 2013-2015. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define MSI_STATUS		0x0
+#define MSI_ERROR		0x4
+#define MSI_INTMASK		0x8
+
+#define MAX_MSI_VECTORS		32
+struct altera_msi {
+	DECLARE_BITMAP(used, MAX_MSI_VECTORS);
+	struct mutex		lock;	/* proctect used variable */
+	struct platform_device	*pdev;
+	struct irq_domain		*msi_domain;
+	struct irq_domain		*inner_domain;
+	void __iomem		*csr_base;
+	void __iomem		*vector_base;
+	phys_addr_t		vector_phy;
+	u32			num_of_vectors;
+	int			irq;
+};
+
+static inline void msi_writel(struct altera_msi *msi, u32 value, u32 reg)
+{
+	writel_relaxed(value, msi->csr_base + reg);
+}
+
+static inline u32 msi_readl(struct altera_msi *msi, u32 reg)
+{
+	return readl_relaxed(msi->csr_base + reg);
+}
+
+static void altera_msi_isr(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct altera_msi *msi;
+	unsigned long status;
+	u32 num_of_vectors;
+	u32 bit;
+
+	chained_irq_enter(chip, desc);
+	msi = irq_desc_get_handler_data(desc);
+	num_of_vectors = msi->num_of_vectors;
+
+	do {
+		status = msi_readl(msi, MSI_STATUS);
+		if (!status)
+			break;
+
+		do {
+			bit = find_first_bit(&status, num_of_vectors);
+			/* Dummy read from vector to clear the interrupt */
+			readl_relaxed(msi->vector_base + (bit * sizeof(u32)));
+
+			irq = irq_find_mapping(msi->inner_domain, bit);
+			if (irq) {
+				if (test_bit(bit, msi->used))
+					generic_handle_irq(irq);
+				else
+					dev_info(&msi->pdev->dev, "unhandled MSI\n");
+			} else
+				dev_info(&msi->pdev->dev, "unexpected MSI\n");
+
+			/* Clear the bit from status and repeat without reading
+			 * again status register. */
+			clear_bit(bit, &status);
+		} while (status);
+	} while (1);
+
+	chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip altera_msi_irq_chip = {
+	.name = "Altera PCIe MSI",
+	.irq_enable = pci_msi_unmask_irq,
+	.irq_disable = pci_msi_mask_irq,
+	.irq_mask = pci_msi_mask_irq,
+	.irq_unmask = pci_msi_unmask_irq,
+};
+
+static struct msi_domain_info altera_msi_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		     MSI_FLAG_PCI_MSIX),
+	.chip	= &altera_msi_irq_chip,
+};
+
+static void altera_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	u32 mask;
+	struct altera_msi *msi = irq_data_get_irq_chip_data(data);
+	u64 addr = msi->vector_phy + (data->hwirq * sizeof(u32));
+
+	msg->address_lo = lower_32_bits(addr);
+	msg->address_hi = upper_32_bits(addr);
+	msg->data = data->hwirq;
+
+	mask = msi_readl(msi, MSI_INTMASK);
+	mask |= 1 << data->hwirq;
+	msi_writel(msi, mask, MSI_INTMASK);
+	dev_dbg(&msi->pdev->dev, "msi#%d address_lo 0x%x\n", (int)data->hwirq,
+		msg->address_lo);
+}
+
+static int altera_msi_set_affinity(struct irq_data *irq_data,
+				 const struct cpumask *mask, bool force)
+{
+	 return -EINVAL;
+}
+
+static struct irq_chip altera_msi_bottom_irq_chip = {
+	.name			= "Altera MSI",
+	.irq_compose_msi_msg	= altera_compose_msi_msg,
+	.irq_set_affinity	= altera_msi_set_affinity,
+};
+
+static int altera_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				  unsigned int nr_irqs, void *args)
+{
+	struct altera_msi *msi = domain->host_data;
+	int bit;
+
+	mutex_lock(&msi->lock);
+
+	bit = find_first_zero_bit(msi->used, msi->num_of_vectors);
+	if (bit < msi->num_of_vectors)
+		set_bit(bit, msi->used);
+
+	mutex_unlock(&msi->lock);
+
+	if (bit < 0)
+		return bit;
+	else if (bit >= msi->num_of_vectors)
+		return -ENOSPC;
+
+	irq_domain_set_info(domain, virq, bit, &altera_msi_bottom_irq_chip,
+			    domain->host_data, handle_simple_irq,
+			    NULL, NULL);
+	set_irq_flags(virq, IRQF_VALID);
+
+	return 0;
+}
+
+static void altera_irq_domain_free(struct irq_domain *domain,
+				  unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+	struct altera_msi *msi = irq_data_get_irq_chip_data(d);
+	u32 mask;
+
+	mutex_lock(&msi->lock);
+
+	if (!test_bit(d->hwirq, msi->used))
+		dev_err(&msi->pdev->dev, "trying to free unused MSI#%lu\n",
+		d->hwirq);
+	else {
+		clear_bit(d->hwirq, msi->used);
+		mask = msi_readl(msi, MSI_INTMASK);
+		mask &= ~(1 << d->hwirq);
+		msi_writel(msi, mask, MSI_INTMASK);
+	}
+
+	mutex_unlock(&msi->lock);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.alloc	= altera_irq_domain_alloc,
+	.free	= altera_irq_domain_free,
+};
+
+static int altera_allocate_domains(struct altera_msi *msi)
+{
+	msi->inner_domain = irq_domain_add_linear(NULL, msi->num_of_vectors,
+					     &msi_domain_ops, msi);
+	if (!msi->inner_domain) {
+		dev_err(&msi->pdev->dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	msi->msi_domain = pci_msi_create_irq_domain(
+				msi->pdev->dev.of_node,
+				&altera_msi_domain_info, msi->inner_domain);
+	if (!msi->msi_domain) {
+		dev_err(&msi->pdev->dev, "failed to create MSI domain\n");
+		irq_domain_remove(msi->inner_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void altera_free_domains(struct altera_msi *msi)
+{
+	irq_domain_remove(msi->msi_domain);
+	irq_domain_remove(msi->inner_domain);
+}
+
+
+static int altera_msi_remove(struct platform_device *pdev)
+{
+	struct altera_msi *msi = platform_get_drvdata(pdev);
+
+	msi_writel(msi, 0, MSI_INTMASK);
+	irq_set_chained_handler(msi->irq, NULL);
+	irq_set_handler_data(msi->irq, NULL);
+
+	altera_free_domains(msi);
+
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+int altera_msi_probe(struct platform_device *pdev)
+{
+	struct altera_msi *msi;
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	int ret;
+
+	msi = devm_kzalloc(&pdev->dev, sizeof(struct altera_msi),
+		GFP_KERNEL);
+	if (!msi)
+		return -ENOMEM;
+
+	mutex_init(&msi->lock);
+	msi->pdev = pdev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "csr");
+	msi->csr_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(msi->csr_base)) {
+		dev_err(&pdev->dev, "get csr resource failed\n");
+		return PTR_ERR(msi->csr_base);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+			"vector_slave");
+	msi->vector_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(msi->vector_base)) {
+		dev_err(&pdev->dev, "get vector slave resource failed\n");
+		return PTR_ERR(msi->vector_base);
+	}
+
+	msi->vector_phy = res->start;
+
+	if (of_property_read_u32(np, "num-vectors", &msi->num_of_vectors)) {
+		dev_err(&pdev->dev, "failed to parse the number of vectors\n");
+		return -EINVAL;
+	}
+
+	ret = altera_allocate_domains(msi);
+	if (ret)
+		return ret;
+
+	msi->irq = platform_get_irq(pdev, 0);
+	if (msi->irq <= 0) {
+		dev_err(&pdev->dev, "failed to map IRQ: %d\n", msi->irq);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	irq_set_chained_handler(msi->irq, altera_msi_isr);
+	ret = irq_set_handler_data(msi->irq, msi);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register IRQ handler: %d\n",
+			ret);
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, msi);
+
+	return 0;
+
+err:
+	altera_msi_remove(pdev);
+	return ret;
+}
+
+static const struct of_device_id altera_msi_of_match[] = {
+	{ .compatible = "altr,msi-1.0", NULL },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, altera_msi_of_match);
+
+static struct platform_driver altera_msi_driver = {
+	.driver = {
+		.name = "altera-msi",
+		.owner = THIS_MODULE,
+		.of_match_table = altera_msi_of_match,
+	},
+	.probe = altera_msi_probe,
+	.remove = altera_msi_remove,
+};
+
+static int __init altera_msi_init(void)
+{
+	return platform_driver_register(&altera_msi_driver);
+}
+
+subsys_initcall(altera_msi_init);
+
+MODULE_AUTHOR("Ley Foon Tan <lftan@altera.com>");
+MODULE_DESCRIPTION("Altera PCIe MSI support");
+MODULE_LICENSE("GPL v2");