| Message ID | 1438706533-22547-1-git-send-email-izumi.taku@jp.fujitsu.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Taku-san, On Wed, Aug 05, 2015 at 01:42:13AM +0900, Taku Izumi wrote: > AER uncorrectable or correctable error might be recorded > when power on devices. These errors can be ignored, so > BIOS usually clean up these registers ahead of OS's scanning > devices. > However, in case of hot-plug PCIe devices, BIOS can't care. What happens when we power down a device for suspend or because it's idle? Can we get spurious AER errors when we power the device back up? This patch only covers the enumeration path, so we'd need to do more if it can happen during suspend/resume. > Currently OS don't clean up AER error status registers on probing > devices, ignorable AER errors recorded when power-on remains. > This causes false-positive. > > This patch address this problem by cleaning up > AER error status registers on probing devices. > > Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> > --- > drivers/pci/pcie/aer/aerdrv_core.c | 26 ++++++++++++++++++++++++++ > drivers/pci/probe.c | 5 +++++ > include/linux/aer.h | 5 +++++ > 3 files changed, 36 insertions(+) > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c > index 9803e3d..9857cc4 100644 > --- a/drivers/pci/pcie/aer/aerdrv_core.c > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > @@ -74,6 +74,32 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) > } > EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status); > > +int pci_cleanup_aer_error_status_regs(struct pci_dev *dev) > +{ > + int pos; > + u32 status; > + int port_type; > + > + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); > + if (!pos) > + return -EIO; > + > + port_type = pci_pcie_type(dev); > + if (port_type == PCI_EXP_TYPE_ROOT_PORT) { > + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status); > + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, status); > + } > + > + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status); > + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status); > + > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status); > + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(pci_cleanup_aer_error_status_regs); Why does this need to be exported? I see that pci_cleanup_aer_uncorrect_error_status() above is exported, and it is used by many drivers, so I see why that needs to be exported. But there are no users of pci_cleanup_aer_error_status_regs() outside the PCI core yet. And if we wanted to add users outside the core, I would question whether that's the right thing to do. AER management seems like something that probably should be done by the PCI core, not by drivers. > /** > * add_error_device - list device to be handled > * @e_info: pointer to error info > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index cefd636..d660db7 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -12,6 +12,7 @@ > #include <linux/module.h> > #include <linux/cpumask.h> > #include <linux/pci-aspm.h> > +#include <linux/aer.h> > #include <asm-generic/pci-bridge.h> > #include "pci.h" > > @@ -1542,6 +1543,10 @@ static void pci_init_capabilities(struct pci_dev *dev) > > /* Enable ACS P2P upstream forwarding */ > pci_enable_acs(dev); > + > + /* Cleanup AER error status registerts */ > + if (pci_is_pcie(dev)) > + pci_cleanup_aer_error_status_regs(dev); The other capability init functions check internally for pci_is_pcie(), so please do the same here. > } > > void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) > diff --git a/include/linux/aer.h b/include/linux/aer.h > index 4fef65e..744b997 100644 > --- a/include/linux/aer.h > +++ b/include/linux/aer.h > @@ -42,6 +42,7 @@ struct aer_capability_regs { > int pci_enable_pcie_error_reporting(struct pci_dev *dev); > int pci_disable_pcie_error_reporting(struct pci_dev *dev); > int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev); > +int pci_cleanup_aer_error_status_regs(struct pci_dev *dev); > #else > static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) > { > @@ -55,6 +56,10 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) > { > return -EINVAL; > } > +static inline int pci_cleanup_aer_error_status_regs(struct pci_dev *dev) > +{ > + return -EINVAL; > +} > #endif > > void cper_print_aer(struct pci_dev *dev, int cper_severity, > -- > 1.8.3.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Dear Bjorn, Thanks for reviewing. > Hello Taku-san, > > On Wed, Aug 05, 2015 at 01:42:13AM +0900, Taku Izumi wrote: > > AER uncorrectable or correctable error might be recorded > > when power on devices. These errors can be ignored, so > > BIOS usually clean up these registers ahead of OS's scanning > > devices. > > However, in case of hot-plug PCIe devices, BIOS can't care. > > What happens when we power down a device for suspend or because it's idle? > Can we get spurious AER errors when we power the device back up? This > patch only covers the enumeration path, so we'd need to do more if it can > happen during suspend/resume. Our server only supports "suspend to disk". In that case, BIOS cleans up those registers like boot-time. So It seems that no troubles are previously reported other than hot-plug case. However, if box supports suspend-to-RAM, similar problem may happen. It is true that that register clean-up should be done during suspend/resume case. Should we cover during-suspend/resume case ? > > Currently OS don't clean up AER error status registers on probing > > devices, ignorable AER errors recorded when power-on remains. > > This causes false-positive. > > > > This patch address this problem by cleaning up > > AER error status registers on probing devices. > > > > Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> > > --- > > drivers/pci/pcie/aer/aerdrv_core.c | 26 ++++++++++++++++++++++++++ > > drivers/pci/probe.c | 5 +++++ > > include/linux/aer.h | 5 +++++ > > 3 files changed, 36 insertions(+) > > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c > > index 9803e3d..9857cc4 100644 > > --- a/drivers/pci/pcie/aer/aerdrv_core.c > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > > @@ -74,6 +74,32 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) > > } > > EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status); > > > > +int pci_cleanup_aer_error_status_regs(struct pci_dev *dev) > > +{ > > + int pos; > > + u32 status; > > + int port_type; > > + > > + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); > > + if (!pos) > > + return -EIO; > > + > > + port_type = pci_pcie_type(dev); > > + if (port_type == PCI_EXP_TYPE_ROOT_PORT) { > > + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status); > > + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, status); > > + } > > + > > + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status); > > + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status); > > + > > + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status); > > + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status); > > + > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(pci_cleanup_aer_error_status_regs); > > Why does this need to be exported? I see that > pci_cleanup_aer_uncorrect_error_status() above is exported, and it is used > by many drivers, so I see why that needs to be exported. But there are no > users of pci_cleanup_aer_error_status_regs() outside the PCI core yet. And > if we wanted to add users outside the core, I would question whether that's > the right thing to do. AER management seems like something that probably > should be done by the PCI core, not by drivers. You are right. Sincerely, Taku Izumi > > > /** > > * add_error_device - list device to be handled > > * @e_info: pointer to error info > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > > index cefd636..d660db7 100644 > > --- a/drivers/pci/probe.c > > +++ b/drivers/pci/probe.c > > @@ -12,6 +12,7 @@ > > #include <linux/module.h> > > #include <linux/cpumask.h> > > #include <linux/pci-aspm.h> > > +#include <linux/aer.h> > > #include <asm-generic/pci-bridge.h> > > #include "pci.h" > > > > @@ -1542,6 +1543,10 @@ static void pci_init_capabilities(struct pci_dev *dev) > > > > /* Enable ACS P2P upstream forwarding */ > > pci_enable_acs(dev); > > + > > + /* Cleanup AER error status registerts */ > > + if (pci_is_pcie(dev)) > > + pci_cleanup_aer_error_status_regs(dev); > > The other capability init functions check internally for pci_is_pcie(), so > please do the same here. > > > } > > > > void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) > > diff --git a/include/linux/aer.h b/include/linux/aer.h > > index 4fef65e..744b997 100644 > > --- a/include/linux/aer.h > > +++ b/include/linux/aer.h > > @@ -42,6 +42,7 @@ struct aer_capability_regs { > > int pci_enable_pcie_error_reporting(struct pci_dev *dev); > > int pci_disable_pcie_error_reporting(struct pci_dev *dev); > > int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev); > > +int pci_cleanup_aer_error_status_regs(struct pci_dev *dev); > > #else > > static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) > > { > > @@ -55,6 +56,10 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) > > { > > return -EINVAL; > > } > > +static inline int pci_cleanup_aer_error_status_regs(struct pci_dev *dev) > > +{ > > + return -EINVAL; > > +} > > #endif > > > > void cper_print_aer(struct pci_dev *dev, int cper_severity, > > -- > > 1.8.3.1 > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Sep 01, 2015 at 08:14:41AM +0000, Izumi, Taku wrote: > Dear Bjorn, > > Thanks for reviewing. > > > Hello Taku-san, > > > > On Wed, Aug 05, 2015 at 01:42:13AM +0900, Taku Izumi wrote: > > > AER uncorrectable or correctable error might be recorded > > > when power on devices. These errors can be ignored, so > > > BIOS usually clean up these registers ahead of OS's scanning > > > devices. > > > However, in case of hot-plug PCIe devices, BIOS can't care. > > > > What happens when we power down a device for suspend or because it's idle? > > Can we get spurious AER errors when we power the device back up? This > > patch only covers the enumeration path, so we'd need to do more if it can > > happen during suspend/resume. > > Our server only supports "suspend to disk". In that case, > BIOS cleans up those registers like boot-time. > So It seems that no troubles are previously reported other > than hot-plug case. > > However, if box supports suspend-to-RAM, similar problem may happen. > It is true that that register clean-up should be done during suspend/resume > case. Should we cover during-suspend/resume case ? Yes, I think so. pci_restore_state() restores a lot of other configuration; maybe it should do something with AER also. There is a disturbing lack of symmetry between the boot/hot-add paths and the resume-from-D3 path. We're doing similar things, at least from the hardware point of view, but the code is not similar at all. It would be nice if we could unify those somehow. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 9803e3d..9857cc4 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -74,6 +74,32 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status); +int pci_cleanup_aer_error_status_regs(struct pci_dev *dev) +{ + int pos; + u32 status; + int port_type; + + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + if (!pos) + return -EIO; + + port_type = pci_pcie_type(dev); + if (port_type == PCI_EXP_TYPE_ROOT_PORT) { + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status); + pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, status); + } + + pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status); + pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status); + + pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status); + pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status); + + return 0; +} +EXPORT_SYMBOL_GPL(pci_cleanup_aer_error_status_regs); + /** * add_error_device - list device to be handled * @e_info: pointer to error info diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index cefd636..d660db7 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/cpumask.h> #include <linux/pci-aspm.h> +#include <linux/aer.h> #include <asm-generic/pci-bridge.h> #include "pci.h" @@ -1542,6 +1543,10 @@ static void pci_init_capabilities(struct pci_dev *dev) /* Enable ACS P2P upstream forwarding */ pci_enable_acs(dev); + + /* Cleanup AER error status registerts */ + if (pci_is_pcie(dev)) + pci_cleanup_aer_error_status_regs(dev); } void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) diff --git a/include/linux/aer.h b/include/linux/aer.h index 4fef65e..744b997 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -42,6 +42,7 @@ struct aer_capability_regs { int pci_enable_pcie_error_reporting(struct pci_dev *dev); int pci_disable_pcie_error_reporting(struct pci_dev *dev); int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev); +int pci_cleanup_aer_error_status_regs(struct pci_dev *dev); #else static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) { @@ -55,6 +56,10 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) { return -EINVAL; } +static inline int pci_cleanup_aer_error_status_regs(struct pci_dev *dev) +{ + return -EINVAL; +} #endif void cper_print_aer(struct pci_dev *dev, int cper_severity,
AER uncorrectable or correctable error might be recorded when power on devices. These errors can be ignored, so BIOS usually clean up these registers ahead of OS's scanning devices. However, in case of hot-plug PCIe devices, BIOS can't care. Currently OS don't clean up AER error status registers on probing devices, ignorable AER errors recorded when power-on remains. This causes false-positive. This patch address this problem by cleaning up AER error status registers on probing devices. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> --- drivers/pci/pcie/aer/aerdrv_core.c | 26 ++++++++++++++++++++++++++ drivers/pci/probe.c | 5 +++++ include/linux/aer.h | 5 +++++ 3 files changed, 36 insertions(+)