From patchwork Mon Mar 13 02:42:40 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Zhichang Yuan X-Patchwork-Id: 9619651 X-Patchwork-Delegate: bhelgaas@google.com Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id EFCDC60417 for ; Mon, 13 Mar 2017 02:13:47 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id DC5CE28440 for ; Mon, 13 Mar 2017 02:13:47 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id D10C328447; Mon, 13 Mar 2017 02:13:47 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.9 required=2.0 tests=BAYES_00,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id D048628454 for ; Mon, 13 Mar 2017 02:13:45 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933415AbdCMCNc (ORCPT ); Sun, 12 Mar 2017 22:13:32 -0400 Received: from szxga01-in.huawei.com ([45.249.212.187]:4303 "EHLO dggrg01-dlp.huawei.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1755856AbdCMCNS (ORCPT ); Sun, 12 Mar 2017 22:13:18 -0400 Received: from 172.30.72.57 (EHLO DGGEML401-HUB.china.huawei.com) ([172.30.72.57]) by dggrg01-dlp.huawei.com (MOS 4.4.6-GA FastPath queued) with ESMTP id AKQ82058; Mon, 13 Mar 2017 10:11:21 +0800 (CST) Received: from localhost.localdomain (10.67.212.75) by DGGEML401-HUB.china.huawei.com (10.3.17.32) with Microsoft SMTP Server id 14.3.301.0; Mon, 13 Mar 2017 10:11:08 +0800 From: "zhichang.yuan" To: , , , , , , , , , CC: , , , , , , , , , , , , , , , , "zhichang.yuan" Subject: [PATCH V7 4/7] LPC: Support the device-tree LPC host on Hip06/Hip07 Date: Mon, 13 Mar 2017 10:42:40 +0800 Message-ID: <1489372963-9000-5-git-send-email-yuanzhichang@hisilicon.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1489372963-9000-1-git-send-email-yuanzhichang@hisilicon.com> References: <1489372963-9000-1-git-send-email-yuanzhichang@hisilicon.com> MIME-Version: 1.0 X-Originating-IP: [10.67.212.75] X-CFilter-Loop: Reflected X-Mirapoint-Virus-RAPID-Raw: score=unknown(0), refid=str=0001.0A010204.58C5FFCA.0024, ss=1, re=0.000, recu=0.000, reip=0.000, cl=1, cld=1, fgs=0, ip=0.0.0.0, so=2014-11-16 11:51:01, dmn=2013-03-21 17:37:32 X-Mirapoint-Loop-Id: 38a9f920b4cfee06a4b981e7939f320d Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The low-pin-count(LPC) interface of Hip06/Hip07 accesses the peripherals in I/O port addresses. This patch implements the LPC host controller driver which perform the I/O operations on the underlying hardware. We don't want to touch those existing peripherals' driver, such as ipmi-bt. So this driver applies the indirect-IO introduced in the previous patch after registering an indirect-IO node to the indirect-IO devices list which will be searched in the I/O accessors. As the I/O translations for LPC children depend on the host I/O registration, we should ensure the host I/O registration is finished before all the LPC children scanning. That is why an arch_init() hook was added in this patch. Signed-off-by: zhichang.yuan Signed-off-by: Gabriele Paoloni Acked-by: Rob Herring #dts part --- .../arm/hisilicon/hisilicon-low-pin-count.txt | 33 ++ MAINTAINERS | 8 + arch/arm64/boot/dts/hisilicon/hip06-d03.dts | 4 + arch/arm64/boot/dts/hisilicon/hip06.dtsi | 14 + arch/arm64/boot/dts/hisilicon/hip07-d05.dts | 4 + arch/arm64/boot/dts/hisilicon/hip07.dtsi | 14 + drivers/bus/Kconfig | 8 + drivers/bus/Makefile | 1 + drivers/bus/hisi_lpc.c | 569 +++++++++++++++++++++ 9 files changed, 655 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt create mode 100644 drivers/bus/hisi_lpc.c diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt new file mode 100644 index 0000000..213181f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt @@ -0,0 +1,33 @@ +Hisilicon Hip06 low-pin-count device + Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which + provides I/O access to some legacy ISA devices. + Hip06 is based on arm64 architecture where there is no I/O space. So, the + I/O ports here are not cpu addresses, and there is no 'ranges' property in + LPC device node. + +Required properties: +- compatible: value should be as follows: + (a) "hisilicon,hip06-lpc" + (b) "hisilicon,hip07-lpc" +- #address-cells: must be 2 which stick to the ISA/EISA binding doc. +- #size-cells: must be 1 which stick to the ISA/EISA binding doc. +- reg: base memory range where the LPC register set is mapped. + +Note: + The node name before '@' must be "isa" to represent the binding stick to the + ISA/EISA binding specification. + +Example: + +isa@a01b0000 { + compatible = "hisilicon,hip06-lpc"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index c265a5f..b6b86f5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5940,6 +5940,14 @@ F: include/uapi/linux/if_hippi.h F: net/802/hippi.c F: drivers/net/hippi/ +HISILICON LPC BUS DRIVER +M: Zhichang Yuan +L: linux-arm-kernel@lists.infradead.org +W: http://www.hisilicon.com +S: Maintained +F: drivers/bus/hisi_lpc.c +F: Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt + HISILICON NETWORK SUBSYSTEM DRIVER M: Yisen Zhuang M: Salil Mehta diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts index 7c4114a..75b2b5c 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -52,3 +52,7 @@ &usb_ehci { status = "ok"; }; + +&ipmi0 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index a049b64..c450f8d 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -318,6 +318,20 @@ #size-cells = <2>; ranges; + isa@a01b0000 { + compatible = "hisilicon,hip06-lpc"; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + status = "disabled"; + }; + }; + refclk: refclk { compatible = "fixed-clock"; clock-frequency = <50000000>; diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts index e058442..8574522 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts +++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts @@ -64,3 +64,7 @@ &usb_ehci { status = "ok"; }; + +&ipmi0 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 5144eb1..c53c8a8 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1028,6 +1028,20 @@ #size-cells = <2>; ranges; + isa@a01b0000 { + compatible = "hisilicon,hip07-lpc"; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + status = "disabled"; + }; + }; + uart0: uart@602b0000 { compatible = "arm,sbsa-uart"; reg = <0x0 0x602b0000 0x0 0x1000>; diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 0a52da4..feb5114 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -64,6 +64,14 @@ config BRCMSTB_GISB_ARB arbiter. This driver provides timeout and target abort error handling and internal bus master decoding. +config HISILICON_LPC + bool "Support for ISA I/O space on Hisilicon Hip0X" + depends on (ARM64 && ARCH_HISI) || COMPILE_TEST + depends on LIBIO + help + Driver needed for some legacy ISA devices attached to Low-Pin-Count + on Hisilicon Hip0X SoC. + config IMX_WEIM bool "Freescale EIM DRIVER" depends on ARCH_MXC diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile index cc6364b..28e3862 100644 --- a/drivers/bus/Makefile +++ b/drivers/bus/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_ARM_CCI) += arm-cci.o obj-$(CONFIG_ARM_CCN) += arm-ccn.o obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o +obj-$(CONFIG_HISILICON_LPC) += hisi_lpc.o obj-$(CONFIG_IMX_WEIM) += imx-weim.o obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o diff --git a/drivers/bus/hisi_lpc.c b/drivers/bus/hisi_lpc.c new file mode 100644 index 0000000..03cf19a --- /dev/null +++ b/drivers/bus/hisi_lpc.c @@ -0,0 +1,569 @@ +/* + * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved. + * Author: Zhichang Yuan + * Author: Zou Rongrong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Setting this bit means each IO operation will target to a + * different port address: + * 0 means repeatedly IO operations will stick on the same port, + * such as BT; + */ +#define FG_INCRADDR_LPC 0x02 + +struct lpc_cycle_para { + unsigned int opflags; + unsigned int csize; /* the data length of each operation */ +}; + +struct hisilpc_dev { + spinlock_t cycle_lock; + void __iomem *membase; + struct libio_range *io_host; +}; + +/* bounds of the LPC bus address range */ +#define LPC_MIN_BUS_RANGE 0x0 + +/* + * The default maximal IO size for Hip06/Hip07 LPC bus. + * Defining the I/O range size as 0x400 here should be sufficient for + * all peripherals under the bus. + */ +#define LPC_BUS_IO_SIZE 0x400 + +/* The maximum continuous cycles per burst */ +#define LPC_MAX_BURST 16 +/* The IO cycle counts supported is four per operation at maximum */ +#define LPC_MAX_DULEN 4 +#if LPC_MAX_DULEN > LPC_MAX_BURST +#error "LPC.. MAX_DULEN must be not bigger than MAX_OPCNT!" +#endif + +#if LPC_MAX_BURST % LPC_MAX_DULEN +#error "LPC.. LPC_MAX_BURST must be multiple of LPC_MAX_DULEN!" +#endif + +#define LPC_REG_START 0x00 /* start a new LPC cycle */ +#define LPC_REG_OP_STATUS 0x04 /* the current LPC status */ +#define LPC_REG_IRQ_ST 0x08 /* interrupt enable&status */ +#define LPC_REG_OP_LEN 0x10 /* how many LPC cycles each start */ +#define LPC_REG_CMD 0x14 /* command for the required LPC cycle */ +#define LPC_REG_ADDR 0x20 /* LPC target address */ +#define LPC_REG_WDATA 0x24 /* data to be written */ +#define LPC_REG_RDATA 0x28 /* data coming from peer */ + + +/* The command register fields */ +#define LPC_CMD_SAMEADDR 0x08 +#define LPC_CMD_TYPE_IO 0x00 +#define LPC_CMD_WRITE 0x01 +#define LPC_CMD_READ 0x00 +/* the bit attribute is W1C. 1 represents OK. */ +#define LPC_STAT_BYIRQ 0x02 + +#define LPC_STATUS_IDLE 0x01 +#define LPC_OP_FINISHED 0x02 + +#define START_WORK 0x01 + +/* + * The minimal nanosecond interval for each query on LPC cycle status. + */ +#define LPC_NSEC_PERWAIT 100 +/* + * The maximum waiting time is about 128us. + * It is specific for stream I/O, such as ins. + * The fastest IO cycle time is about 390ns, but the worst case will wait + * for extra 256 lpc clocks, so (256 + 13) * 30ns = 8 us. The maximum + * burst cycles is 16. So, the maximum waiting time is about 128us under + * worst case. + * choose 1300 as the maximum. + */ +#define LPC_MAX_WAITCNT 1300 +/* About 10us. This is specific for single IO operation, such as inb. */ +#define LPC_PEROP_WAITCNT 100 + + +static inline int wait_lpc_idle(unsigned char *mbase, + unsigned int waitcnt) { + u32 opstatus; + + while (waitcnt--) { + ndelay(LPC_NSEC_PERWAIT); + opstatus = readl(mbase + LPC_REG_OP_STATUS); + if (opstatus & LPC_STATUS_IDLE) + return (opstatus & LPC_OP_FINISHED) ? 0 : (-EIO); + } + return -ETIME; +} + +/* + * hisilpc_target_in - trigger a series of lpc cycles to read required data + * from target peripheral. + * @pdev: pointer to hisi lpc device + * @para: some parameters used to control the lpc I/O operations + * @ptaddr: the lpc I/O target port address + * @buf: where the read back data is stored + * @opcnt: how many I/O operations required in this calling + * + * Only one byte data is read each I/O operation. + * + * Returns 0 on success, non-zero on fail. + * + */ +static int +hisilpc_target_in(struct hisilpc_dev *lpcdev, struct lpc_cycle_para *para, + unsigned long ptaddr, unsigned char *buf, + unsigned long opcnt) +{ + unsigned long cnt_per_trans; + unsigned int cmd_word; + unsigned int waitcnt; + int ret; + + if (!buf || !opcnt || !para || !para->csize || !lpcdev) + return -EINVAL; + + cmd_word = LPC_CMD_TYPE_IO | LPC_CMD_READ; + waitcnt = LPC_PEROP_WAITCNT; + if (!(para->opflags & FG_INCRADDR_LPC)) { + cmd_word |= LPC_CMD_SAMEADDR; + waitcnt = LPC_MAX_WAITCNT; + } + + ret = 0; + cnt_per_trans = (para->csize == 1) ? opcnt : para->csize; + for (; opcnt && !ret; cnt_per_trans = para->csize) { + unsigned long flags; + + /* whole operation must be atomic */ + spin_lock_irqsave(&lpcdev->cycle_lock, flags); + + writel_relaxed(cnt_per_trans, lpcdev->membase + LPC_REG_OP_LEN); + + writel_relaxed(cmd_word, lpcdev->membase + LPC_REG_CMD); + + writel_relaxed(ptaddr, lpcdev->membase + LPC_REG_ADDR); + + writel(START_WORK, lpcdev->membase + LPC_REG_START); + + /* whether the operation is finished */ + ret = wait_lpc_idle(lpcdev->membase, waitcnt); + if (!ret) { + opcnt -= cnt_per_trans; + for (cnt_per_trans--; cnt_per_trans--; buf++) + *buf = readb_relaxed(lpcdev->membase + + LPC_REG_RDATA); + *buf = readb(lpcdev->membase + LPC_REG_RDATA); + } + + spin_unlock_irqrestore(&lpcdev->cycle_lock, flags); + } + + return ret; +} + +/* + * hisilpc_target_out - trigger a series of lpc cycles to write required + * data to target peripheral. + * @pdev: pointer to hisi lpc device + * @para: some parameters used to control the lpc I/O operations + * @ptaddr: the lpc I/O target port address + * @buf: where the data to be written is stored + * @opcnt: how many I/O operations required + * + * Only one byte data is read each I/O operation. + * + * Returns 0 on success, non-zero on fail. + * + */ +static int +hisilpc_target_out(struct hisilpc_dev *lpcdev, struct lpc_cycle_para *para, + unsigned long ptaddr, const unsigned char *buf, + unsigned long opcnt) +{ + unsigned long cnt_per_trans; + unsigned int cmd_word; + unsigned int waitcnt; + int ret; + + if (!buf || !opcnt || !para || !lpcdev) + return -EINVAL; + + /* default is increasing address */ + cmd_word = LPC_CMD_TYPE_IO | LPC_CMD_WRITE; + waitcnt = LPC_PEROP_WAITCNT; + if (!(para->opflags & FG_INCRADDR_LPC)) { + cmd_word |= LPC_CMD_SAMEADDR; + waitcnt = LPC_MAX_WAITCNT; + } + + ret = 0; + cnt_per_trans = (para->csize == 1) ? opcnt : para->csize; + for (; opcnt && !ret; cnt_per_trans = para->csize) { + unsigned long flags; + + spin_lock_irqsave(&lpcdev->cycle_lock, flags); + + writel_relaxed(cnt_per_trans, lpcdev->membase + LPC_REG_OP_LEN); + writel_relaxed(cmd_word, lpcdev->membase + LPC_REG_CMD); + writel_relaxed(ptaddr, lpcdev->membase + LPC_REG_ADDR); + + opcnt -= cnt_per_trans; + for (; cnt_per_trans--; buf++) + writeb_relaxed(*buf, lpcdev->membase + LPC_REG_WDATA); + + writel(START_WORK, lpcdev->membase + LPC_REG_START); + + /* whether the operation is finished */ + ret = wait_lpc_idle(lpcdev->membase, waitcnt); + + spin_unlock_irqrestore(&lpcdev->cycle_lock, flags); + } + + return ret; +} + +static inline unsigned long +hisi_lpc_pio_to_addr(struct hisilpc_dev *lpcdev, unsigned long pio) +{ + return pio - lpcdev->io_host->io_start + lpcdev->io_host->hw_start; +} + + +/** + * hisilpc_comm_in - read/input the data from the I/O peripheral + * through LPC. + * @devobj: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @dlen: the data length required to read from the target I/O port. + * + * when succeed, the data read back is stored in buffer pointed by inbuf. + * For inb, return the data read from I/O or -1 when error occur. + */ +static u32 hisilpc_comm_in(void *devobj, unsigned long pio, size_t dlen) +{ + int ret = 0; + u32 rd_data; + unsigned long ptaddr; + unsigned char *newbuf; + struct lpc_cycle_para iopara; + struct hisilpc_dev *lpcdev = devobj; + + if (!lpcdev || !dlen || dlen > LPC_MAX_DULEN || (dlen & (dlen - 1))) + return -1; + + /* the local buffer must be enough for one data unit */ + if (sizeof(rd_data) < dlen) + return -1; + + newbuf = (unsigned char *)&rd_data; + + ptaddr = hisi_lpc_pio_to_addr(lpcdev, pio); + + iopara.opflags = FG_INCRADDR_LPC; + iopara.csize = dlen; + + ret = hisilpc_target_in(lpcdev, &iopara, ptaddr, newbuf, dlen); + if (ret) + return -1; + + return le32_to_cpu(rd_data); +} + +/** + * hisilpc_comm_out - output the data whose maximum length is four bytes + to the I/O peripheral through the LPC host. + * @devobj: pointer to the device information relevant to LPC controller. + * @outval: a value to be outputted from caller, maximum is four bytes. + * @pio: the target I/O port address. + * @dlen: the data length required writing to the target I/O port. + * + * This function is corresponding to out(b,w,l) only + * + */ +static void hisilpc_comm_out(void *devobj, unsigned long pio, + u32 outval, size_t dlen) +{ + unsigned long ptaddr; + struct hisilpc_dev *lpcdev = devobj; + struct lpc_cycle_para iopara; + const unsigned char *newbuf; + + if (!lpcdev || !dlen || dlen > LPC_MAX_DULEN) + return; + + if (sizeof(outval) < dlen) + return; + + outval = cpu_to_le32(outval); + + newbuf = (const unsigned char *)&outval; + ptaddr = hisi_lpc_pio_to_addr(lpcdev, pio); + + iopara.opflags = FG_INCRADDR_LPC; + iopara.csize = dlen; + + hisilpc_target_out(lpcdev, &iopara, ptaddr, newbuf, dlen); +} + +/* + * hisilpc_comm_ins - read/input the data in buffer to the I/O + * peripheral through LPC, it corresponds to ins(b,w,l) + * @devobj: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @inbuf: a buffer where read/input data bytes are stored. + * @dlen: the data length required writing to the target I/O port. + * @count: how many data units whose length is dlen will be read. + * + */ +static u32 +hisilpc_comm_ins(void *devobj, unsigned long pio, void *inbuf, + size_t dlen, unsigned int count) +{ + struct hisilpc_dev *lpcdev = devobj; + struct lpc_cycle_para iopara; + unsigned char *newbuf; + unsigned int loopcnt, cntleft; + unsigned long ptaddr; + + if (!lpcdev || !inbuf || !count || !dlen || + dlen > LPC_MAX_DULEN || (dlen & (dlen - 1)) || count % dlen) + return -EINVAL; + + iopara.opflags = 0; + if (dlen > 1) + iopara.opflags |= FG_INCRADDR_LPC; + iopara.csize = dlen; + + ptaddr = hisi_lpc_pio_to_addr(lpcdev, pio); + newbuf = (unsigned char *)inbuf; + /* + * ensure data stream whose length is multiple of dlen to be processed + * each IO input + */ + cntleft = count * dlen; + do { + int ret; + + loopcnt = (cntleft >= LPC_MAX_BURST) ? LPC_MAX_BURST : cntleft; + ret = hisilpc_target_in(lpcdev, &iopara, ptaddr, + newbuf, loopcnt); + if (ret) + return ret; + newbuf += loopcnt; + cntleft -= loopcnt; + } while (cntleft); + + return 0; +} + +/* + * hisilpc_comm_outs - write/output the data in buffer to the I/O + * peripheral through LPC, it corresponds to outs(b,w,l) + * @devobj: pointer to the device information relevant to LPC controller. + * @pio: the target I/O port address. + * @outbuf: a buffer where write/output data bytes are stored. + * @dlen: the data length required writing to the target I/O port . + * @count: how many data units whose length is dlen will be written. + * + */ +static void +hisilpc_comm_outs(void *devobj, unsigned long pio, const void *outbuf, + size_t dlen, unsigned int count) +{ + struct hisilpc_dev *lpcdev = devobj; + struct lpc_cycle_para iopara; + const unsigned char *newbuf; + unsigned int loopcnt, cntleft; + unsigned long ptaddr; + + if (!lpcdev || !outbuf || !count || !dlen || + dlen > LPC_MAX_DULEN || (dlen & (dlen - 1)) || count % dlen) + return; + + iopara.opflags = 0; + if (dlen > 1) + iopara.opflags |= FG_INCRADDR_LPC; + iopara.csize = dlen; + + ptaddr = hisi_lpc_pio_to_addr(lpcdev, pio); + newbuf = (unsigned char *)outbuf; + /* + * ensure data stream whose length is multiple of dlen to be processed + * each IO input + */ + cntleft = count * dlen; + do { + loopcnt = (cntleft >= LPC_MAX_BURST) ? LPC_MAX_BURST : cntleft; + if (hisilpc_target_out(lpcdev, &iopara, ptaddr, newbuf, + loopcnt)) + break; + newbuf += loopcnt; + cntleft -= loopcnt; + } while (cntleft); +} + +static struct libio_ops hisi_lpc_ops = { + .pfin = hisilpc_comm_in, + .pfout = hisilpc_comm_out, + .pfins = hisilpc_comm_ins, + .pfouts = hisilpc_comm_outs, +}; + + +static int hisilpc_host_io_register(struct device *dev, + struct hisilpc_dev *lpcdev) +{ + struct libio_range *range, *tmprange; + + /* + * indirectIO bus was detected, time to request the linux virtual + * IO. + */ + range = kzalloc(sizeof(*range), GFP_KERNEL); + if (!range) + return -ENOMEM; + range->node = dev->fwnode; + range->flags = IO_HOST_INDIRECT; + range->size = LPC_BUS_IO_SIZE; + range->hw_start = LPC_MIN_BUS_RANGE; + + tmprange = register_libio_range(range); + if (tmprange != range) { + kfree(range); + if (IS_ERR(tmprange)) + return -EFAULT; + } + + lpcdev->io_host = range; + + return 0; +} + +/** + * hisilpc_probe - the probe callback function for hisi lpc device, + * will finish all the initialization. + * @pdev: the platform device corresponding to hisi lpc + * + * Returns 0 on success, non-zero on fail. + * + */ +static int hisilpc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct resource *res; + struct hisilpc_dev *lpcdev; + int ret = 0; + + dev_info(dev, "probing...\n"); + + lpcdev = devm_kzalloc(dev, sizeof(struct hisilpc_dev), GFP_KERNEL); + if (!lpcdev) + return -ENOMEM; + + spin_lock_init(&lpcdev->cycle_lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "no MEM resource\n"); + return -ENODEV; + } + + lpcdev->membase = devm_ioremap_resource(dev, res); + if (IS_ERR(lpcdev->membase)) { + dev_err(dev, "remap failed\n"); + return PTR_ERR(lpcdev->membase); + } + + /* register the LPC host PIO resources */ + ret = hisilpc_host_io_register(dev, lpcdev); + if (ret) { + dev_err(dev, "host PIO registration failed!\n"); + return ret; + } + + lpcdev->io_host->devpara = lpcdev; + lpcdev->io_host->ops = &hisi_lpc_ops; + + platform_set_drvdata(pdev, lpcdev); + + /* + * It is time to start the children scannings.... + */ + if (!has_acpi_companion(dev)) { + ret = of_platform_populate(dev->of_node, NULL, NULL, dev); + if (ret) + dev_err(dev, "OF: enumerate LPC bus fail(%d)\n", ret); + } + + if (!ret) { + dev_info(dev, "hslpc end probing. range[%pa - sz:%pa]\n", + &lpcdev->io_host->io_start, + &lpcdev->io_host->size); + } else { + dev_info(dev, "hslpc probing is fail(%d)\n", ret); + /* + * When LPC probing is not completely successful, set 'devpara' + * as NULL. This will make all the LPC I/O return failure + * directly without any hardware operations. It will block + * some peripherals which had not finished the initialization + * manipulate I/O for safety. + */ + lpcdev->io_host->devpara = NULL; + } + + return ret; +} + +static const struct of_device_id hisilpc_of_match[] = { + { .compatible = "hisilicon,hip06-lpc", }, + { .compatible = "hisilicon,hip07-lpc", }, + {}, +}; + +static struct platform_driver hisilpc_driver = { + .driver = { + .name = "hisi_lpc", + .of_match_table = hisilpc_of_match, + }, + .probe = hisilpc_probe, +}; + +/* + * must be called before fs_initcall(pnpacpi_init) and after + * subsys_initcall(acpi_init); + * As the LPC uart(PNP0503) depends on this driver. + */ +static int __init hisilpc_init(void) +{ + return platform_driver_register(&hisilpc_driver); +} + +subsys_initcall_sync(hisilpc_init);