diff mbox series

[V2,3/7] phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init

Message ID 1596036607-11877-4-git-send-email-sivaprak@codeaurora.org
State Changes Requested
Delegated to: Lorenzo Pieralisi
Headers show
Series Add PCIe support for IPQ8074 | expand

Commit Message

Sivaprakash Murugesan July 29, 2020, 3:30 p.m. UTC
There were some problem in ipq8074 Gen2 PCIe phy init sequence.

1. Few register values were wrongly updated in the phy init sequence.
2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter
   register which is added in serdes table causing the wrong register
   was getting updated.
3. Clocks and resets were not added in the phy init.

Fix these to make Gen2 PCIe port on ipq8074 devices to work.

Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074")

Cc: stable@vger.kernel.org
Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
---
[V2]
 * Fixed commit message as commented by Vinod
 drivers/phy/qualcomm/phy-qcom-qmp.c | 16 +++++++++-------
 drivers/phy/qualcomm/phy-qcom-qmp.h |  2 ++
 2 files changed, 11 insertions(+), 7 deletions(-)

Comments

Vinod Koul Aug. 23, 2020, 3:50 p.m. UTC | #1
On 29-07-20, 21:00, Sivaprakash Murugesan wrote:
> There were some problem in ipq8074 Gen2 PCIe phy init sequence.
> 
> 1. Few register values were wrongly updated in the phy init sequence.
> 2. The register QSERDES_RX_SIGDET_CNTRL is a RX tuning parameter
>    register which is added in serdes table causing the wrong register
>    was getting updated.
> 3. Clocks and resets were not added in the phy init.
> 
> Fix these to make Gen2 PCIe port on ipq8074 devices to work.

Applied to fixes, thanks

> 
> Fixes: eef243d04b2b6 ("phy: qcom-qmp: Add support for IPQ8074")
> 

no need of empty line here, have fixed it up while applying
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 562053c..6e6f992 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -604,8 +604,8 @@  static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
 	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
 	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
-	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f),
-	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x1f),
 	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
 	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
 	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
@@ -631,7 +631,6 @@  static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
 	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
-	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
@@ -640,7 +639,6 @@  static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
 	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
 	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
-	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
@@ -648,6 +646,8 @@  static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
 	QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
 	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_TX_EMP_POST1_LVL, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_TX_SLEW_CNTL, 0x0a),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
@@ -658,7 +658,6 @@  static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
 	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
 	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
-	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4),
 };
 
 static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
@@ -2046,6 +2045,9 @@  static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.pwrdn_ctrl		= SW_PWRDN,
 };
 
+static const char * const ipq8074_pciephy_clk_l[] = {
+	"aux", "cfg_ahb",
+};
 /* list of resets */
 static const char * const ipq8074_pciephy_reset_l[] = {
 	"phy", "common",
@@ -2063,8 +2065,8 @@  static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
 	.rx_tbl_num		= ARRAY_SIZE(ipq8074_pcie_rx_tbl),
 	.pcs_tbl		= ipq8074_pcie_pcs_tbl,
 	.pcs_tbl_num		= ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
-	.clk_list		= NULL,
-	.num_clks		= 0,
+	.clk_list		= ipq8074_pciephy_clk_l,
+	.num_clks		= ARRAY_SIZE(ipq8074_pciephy_clk_l),
 	.reset_list		= ipq8074_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(ipq8074_pciephy_reset_l),
 	.vreg_list		= NULL,
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 4277f59..904b80a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -77,6 +77,8 @@ 
 #define QSERDES_COM_CORECLK_DIV_MODE1			0x1bc
 
 /* Only for QMP V2 PHY - TX registers */
+#define QSERDES_TX_EMP_POST1_LVL			0x018
+#define QSERDES_TX_SLEW_CNTL				0x040
 #define QSERDES_TX_RES_CODE_LANE_OFFSET			0x054
 #define QSERDES_TX_DEBUG_BUS_SEL			0x064
 #define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN	0x068