diff mbox series

[v9,2/8] PCI: imx6: Add the error propagation from host_init

Message ID 1651801629-30223-3-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
State New
Delegated to: Lorenzo Pieralisi
Headers show
Series PCI: imx6: refine codes and add compliance tests mode support | expand

Commit Message

Richard Zhu May 6, 2022, 1:47 a.m. UTC
Since there is error return check of the host_init callback, add error
check to imx6_pcie_deassert_core_reset() function, and change the
function type accordingly.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/pci/controller/dwc/pci-imx6.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

Comments

Bjorn Helgaas June 8, 2022, 6:53 p.m. UTC | #1
On Fri, May 06, 2022 at 09:47:03AM +0800, Richard Zhu wrote:
> Since there is error return check of the host_init callback, add error
> check to imx6_pcie_deassert_core_reset() function, and change the
> function type accordingly.

> @@ -878,11 +879,18 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
>  static int imx6_pcie_host_init(struct pcie_port *pp)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct device *dev = pci->dev;
>  	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
> +	int ret;
>  
>  	imx6_pcie_assert_core_reset(imx6_pcie);
>  	imx6_pcie_init_phy(imx6_pcie);
> -	imx6_pcie_deassert_core_reset(imx6_pcie);
> +	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
> +	if (ret < 0) {
> +		dev_err(dev, "pcie host init failed: %d.\n", ret);

Other messages from this driver do not include a trailing period.
Richard Zhu June 9, 2022, 6:19 a.m. UTC | #2
> -----Original Message-----
> From: Bjorn Helgaas <helgaas@kernel.org>
> Sent: 2022年6月9日 2:53
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: l.stach@pengutronix.de; bhelgaas@google.com; robh+dt@kernel.org;
> broonie@kernel.org; lorenzo.pieralisi@arm.com; jingoohan1@gmail.com;
> festevam@gmail.com; francesco.dolcini@toradex.com;
> linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx
> <linux-imx@nxp.com>
> Subject: Re: [PATCH v9 2/8] PCI: imx6: Add the error propagation from
> host_init
> 
> On Fri, May 06, 2022 at 09:47:03AM +0800, Richard Zhu wrote:
> > Since there is error return check of the host_init callback, add error
> > check to imx6_pcie_deassert_core_reset() function, and change the
> > function type accordingly.
> 
> > @@ -878,11 +879,18 @@ static int imx6_pcie_start_link(struct dw_pcie
> > *pci)  static int imx6_pcie_host_init(struct pcie_port *pp)  {
> >  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct device *dev = pci->dev;
> >  	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
> > +	int ret;
> >
> >  	imx6_pcie_assert_core_reset(imx6_pcie);
> >  	imx6_pcie_init_phy(imx6_pcie);
> > -	imx6_pcie_deassert_core_reset(imx6_pcie);
> > +	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
> > +	if (ret < 0) {
> > +		dev_err(dev, "pcie host init failed: %d.\n", ret);
> 
> Other messages from this driver do not include a trailing period.
Okay, to keep alignment, would remove the trailing period.
Thanks.

Best Regards
Richard Zhu
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index d3ef0e94ab26..1d3a8a7cafc2 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -542,24 +542,24 @@  static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
 		dev_err(dev, "PCIe PLL lock timeout\n");
 }
 
-static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
+static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct device *dev = pci->dev;
-	int ret;
+	int ret, err;
 
 	if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
 		ret = regulator_enable(imx6_pcie->vpcie);
 		if (ret) {
 			dev_err(dev, "failed to enable vpcie regulator: %d\n",
 				ret);
-			return;
+			return ret;
 		}
 	}
 
-	ret = imx6_pcie_clk_enable(imx6_pcie);
-	if (ret) {
-		dev_err(dev, "unable to enable pcie clocks\n");
+	err = imx6_pcie_clk_enable(imx6_pcie);
+	if (err) {
+		dev_err(dev, "unable to enable pcie clocks: %d\n", err);
 		goto err_clks;
 	}
 
@@ -618,7 +618,7 @@  static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 		break;
 	}
 
-	return;
+	return 0;
 
 err_clks:
 	if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
@@ -627,6 +627,7 @@  static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
 			dev_err(dev, "failed to disable vpcie regulator: %d\n",
 				ret);
 	}
+	return err;
 }
 
 static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
@@ -878,11 +879,18 @@  static int imx6_pcie_start_link(struct dw_pcie *pci)
 static int imx6_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct device *dev = pci->dev;
 	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
+	int ret;
 
 	imx6_pcie_assert_core_reset(imx6_pcie);
 	imx6_pcie_init_phy(imx6_pcie);
-	imx6_pcie_deassert_core_reset(imx6_pcie);
+	ret = imx6_pcie_deassert_core_reset(imx6_pcie);
+	if (ret < 0) {
+		dev_err(dev, "pcie host init failed: %d.\n", ret);
+		return ret;
+	}
+
 	imx6_setup_phy_mpll(imx6_pcie);
 
 	return 0;