diff mbox series

[v1,07/10] arm64: dts: Add iMX8MQ PCIe EP support on EVK board

Message ID 1658223939-25478-8-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series Add iMX PCIe EP mode support | expand

Commit Message

Hongxing Zhu July 19, 2022, 9:45 a.m. UTC 
Add iMX8MQ PCIe EP support on EVK board.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 82387b9cb800..9f3bad9b49a6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -377,6 +377,18 @@  &pcie1 {
 	status = "okay";
 };
 
+&pcie1_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	vph-supply = <&vgen5_reg>;
+	status = "disabled";
+};
+
 &pgc_gpu {
 	power-supply = <&sw1a_reg>;
 };