diff mbox series

[v4,3/4] dts: arm64: imx8mp: Add dbi2 and atu reg for i.MX8MP PCIe EP

Message ID 1722218205-10683-4-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
State Superseded
Delegated to: Krzysztof WilczyƄski
Headers show
Series Add dbi2 and atu for i.MX8M PCIe EP | expand

Commit Message

Richard Zhu July 29, 2024, 1:56 a.m. UTC
Add dbi2 and iatu reg for i.MX8MP PCIe EP.

For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the
driver. This method is not good.

In commit b7d67c6130ee ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
Frank suggests to fetch the dbi2 and atu from DT directly. This commit is
preparation to do that for i.MX8MP PCIe EP.

These changes wouldn't break driver function. When "dbi2" and "atu"
properties are present, i.MX PCIe driver would fetch the according base
addresses from DT directly. If only two reg properties are provided, i.MX
PCIe driver would fall back to the old method.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 603dfe80216f..53748227db10 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -2125,8 +2125,11 @@  pcie: pcie@33800000 {
 
 		pcie_ep: pcie-ep@33800000 {
 			compatible = "fsl,imx8mp-pcie-ep";
-			reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
-			reg-names = "dbi", "addr_space";
+			reg = <0x33800000 0x100000>,
+			      <0x18000000 0x8000000>,
+			      <0x33900000 0x100000>,
+			      <0x33b00000 0x100000>;
+			reg-names = "dbi", "addr_space", "dbi2", "atu";
 			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
 				 <&clk IMX8MP_CLK_HSIO_AXI>,
 				 <&clk IMX8MP_CLK_PCIE_ROOT>;