diff mbox

[v12,1/8] PCI: initialize and release SR-IOV capability

Message ID 20090321140511.GA24964@yzhao-otc.sh.intel.com
State Accepted, archived
Headers show

Commit Message

Yu Zhao March 21, 2009, 2:05 p.m. UTC
On Sat, Mar 21, 2009 at 01:54:09AM +0800, Jesse Barnes wrote:
> On Fri, 20 Mar 2009 11:25:11 +0800
> Yu Zhao <yu.zhao@intel.com> wrote:
> 
> > If a device has the SR-IOV capability, initialize it (set the ARI
> > Capable Hierarchy in the lowest numbered PF if necessary; calculate
> > the System Page Size for the VF MMIO, probe the VF Offset, Stride
> > and BARs). A lock for the VF bus allocation is also initialized if
> > a PF is the lowest numbered PF.
> > 
> > Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
> > Signed-off-by: Yu Zhao <yu.zhao@intel.com>
> 
> I applied this series to my linux-next branch, but there were a few
> conflicts here and there, so please check it out.  Looks like from
> start to finish this took about 6 months to get banged into shape,
> thanks for staying on it, Yu!

Yes, I checked them and found there is conflict between the SR-IOV
changes and Yinghai's 'PCI/x86: detect host bridge config space size
w/o using quirks'. Following is the fix, thanks!


New pci_cfg_space_size() needs invalid pdev->class, put it in the
right place in the pci_setup_device().

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
---
 drivers/pci/probe.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

Comments

Jesse Barnes March 26, 2009, 10:50 p.m. UTC | #1
On Sat, 21 Mar 2009 22:05:11 +0800
Yu Zhao <yu.zhao@intel.com> wrote:

> On Sat, Mar 21, 2009 at 01:54:09AM +0800, Jesse Barnes wrote:
> > On Fri, 20 Mar 2009 11:25:11 +0800
> > Yu Zhao <yu.zhao@intel.com> wrote:
> > 
> > > If a device has the SR-IOV capability, initialize it (set the ARI
> > > Capable Hierarchy in the lowest numbered PF if necessary;
> > > calculate the System Page Size for the VF MMIO, probe the VF
> > > Offset, Stride and BARs). A lock for the VF bus allocation is
> > > also initialized if a PF is the lowest numbered PF.
> > > 
> > > Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
> > > Signed-off-by: Yu Zhao <yu.zhao@intel.com>
> > 
> > I applied this series to my linux-next branch, but there were a few
> > conflicts here and there, so please check it out.  Looks like from
> > start to finish this took about 6 months to get banged into shape,
> > thanks for staying on it, Yu!
> 
> Yes, I checked them and found there is conflict between the SR-IOV
> changes and Yinghai's 'PCI/x86: detect host bridge config space size
> w/o using quirks'. Following is the fix, thanks!
> 
> 
> New pci_cfg_space_size() needs invalid pdev->class, put it in the
> right place in the pci_setup_device().
> 
> Signed-off-by: Yu Zhao <yu.zhao@intel.com>

Applied, thanks Yu.
diff mbox

Patch

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 56c71e5..e2f3dd0 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -713,7 +713,6 @@  int pci_setup_device(struct pci_dev *dev)
 	dev->dev.bus = &pci_bus_type;
 	dev->hdr_type = hdr_type & 0x7f;
 	dev->multifunction = !!(hdr_type & 0x80);
-	dev->cfg_size = pci_cfg_space_size(dev);
 	dev->error_state = pci_channel_io_normal;
 	set_pcie_port_type(dev);
 
@@ -738,6 +737,9 @@  int pci_setup_device(struct pci_dev *dev)
 	dev_dbg(&dev->dev, "found [%04x:%04x] class %06x header type %02x\n",
 		 dev->vendor, dev->device, class, dev->hdr_type);
 
+	/* need to have dev->class ready */
+	dev->cfg_size = pci_cfg_space_size(dev);
+
 	/* "Unknown power state" */
 	dev->current_state = PCI_UNKNOWN;
 
@@ -959,9 +961,6 @@  static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
 		return NULL;
 	}
 
-	/* need to have dev->class ready */
-	dev->cfg_size = pci_cfg_space_size(dev);
-
 	return dev;
 }