diff mbox

PCI: fix name of 'enable' sysfs file

Message ID 20141030163028.GA22250@kroah.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Greg KH Oct. 30, 2014, 4:30 p.m. UTC
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"),
I misstyped the 'enable' sysfs file as 'enabled', which broke the
userspace api.  This patch fixes that issue by renaming the file back.

Reported-by: Jeff Epler <jepler@unpythonic.net>
Cc: stable <stable@vger.kernel.org> # 3.13
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---

Jeff, if you could test this to make sure I got it right, that would be
great.  Again, sorry about this, it was a dumb typo on my part.

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Jiri Kosina Oct. 30, 2014, 4:50 p.m. UTC | #1
On Thu, 30 Oct 2014, Greg Kroah-Hartman wrote:

> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"),
> I misstyped the 'enable' sysfs file as 'enabled', which broke the
> userspace api.  This patch fixes that issue by renaming the file back.

But this is in turn 3.13 -> 3.18 userspace interface breakage ... I don't 
think there is other graceful way out of this than creating a symlink so 
that both variants work, right?
Greg KH Oct. 30, 2014, 4:56 p.m. UTC | #2
On Thu, Oct 30, 2014 at 05:50:41PM +0100, Jiri Kosina wrote:
> On Thu, 30 Oct 2014, Greg Kroah-Hartman wrote:
> 
> > From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > 
> > Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"),
> > I misstyped the 'enable' sysfs file as 'enabled', which broke the
> > userspace api.  This patch fixes that issue by renaming the file back.
> 
> But this is in turn 3.13 -> 3.18 userspace interface breakage ... I don't 
> think there is other graceful way out of this than creating a symlink so 
> that both variants work, right?

Given that no one noticed that this was broken until now, I really doubt
that anyone wrote code for the new file name.  I recommend just fixing
it back, and getting it into all stable kernel trees and moving on.

A symlink for such a foolish mistake seems like a bigger mistake :)

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bjorn Helgaas Oct. 30, 2014, 5:36 p.m. UTC | #3
On Thu, Oct 30, 2014 at 09:30:28AM -0700, Greg Kroah-Hartman wrote:
> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"),
> I misstyped the 'enable' sysfs file as 'enabled', which broke the
> userspace api.  This patch fixes that issue by renaming the file back.
> 
> Reported-by: Jeff Epler <jepler@unpythonic.net>
> Cc: stable <stable@vger.kernel.org> # 3.13
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I applied this to for-linus for v3.18.  If a symlink turns out to be
needed, we can also add that.  Jeff, if you test this, I'll update it with
your Tested-by.

> ---
> 
> Jeff, if you could test this to make sure I got it right, that would be
> great.  Again, sorry about this, it was a dumb typo on my part.
> 
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 92b6d9ab00e4..2c6643fdc0cf 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -185,7 +185,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
>  }
>  static DEVICE_ATTR_RO(modalias);
>  
> -static ssize_t enabled_store(struct device *dev, struct device_attribute *attr,
> +static ssize_t enable_store(struct device *dev, struct device_attribute *attr,
>  			     const char *buf, size_t count)
>  {
>  	struct pci_dev *pdev = to_pci_dev(dev);
> @@ -210,7 +210,7 @@ static ssize_t enabled_store(struct device *dev, struct device_attribute *attr,
>  	return result < 0 ? result : count;
>  }
>  
> -static ssize_t enabled_show(struct device *dev, struct device_attribute *attr,
> +static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
>  			    char *buf)
>  {
>  	struct pci_dev *pdev;
> @@ -218,7 +218,7 @@ static ssize_t enabled_show(struct device *dev, struct device_attribute *attr,
>  	pdev = to_pci_dev(dev);
>  	return sprintf(buf, "%u\n", atomic_read(&pdev->enable_cnt));
>  }
> -static DEVICE_ATTR_RW(enabled);
> +static DEVICE_ATTR_RW(enable);
>  
>  #ifdef CONFIG_NUMA
>  static ssize_t numa_node_show(struct device *dev, struct device_attribute *attr,
> @@ -563,7 +563,7 @@ static struct attribute *pci_dev_attrs[] = {
>  #endif
>  	&dev_attr_dma_mask_bits.attr,
>  	&dev_attr_consistent_dma_mask_bits.attr,
> -	&dev_attr_enabled.attr,
> +	&dev_attr_enable.attr,
>  	&dev_attr_broken_parity_status.attr,
>  	&dev_attr_msi_bus.attr,
>  #if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jeff Epler Oct. 30, 2014, 9:23 p.m. UTC | #4
On Thu, Oct 30, 2014 at 09:30:28AM -0700, Greg Kroah-Hartman wrote:
> From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"),
> I misstyped the 'enable' sysfs file as 'enabled', which broke the
> userspace api.  This patch fixes that issue by renaming the file back.
> 
> Reported-by: Jeff Epler <jepler@unpythonic.net>
> Cc: stable <stable@vger.kernel.org> # 3.13
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tested-by: Jeff Epler <jepler@unpythonic.net>

(with the caveat that, since LinuxCNC uses the -rt kernel, I tested this
change manually backported to 3.14-rt)

Thanks again for your fast action on this.

Jeff
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 92b6d9ab00e4..2c6643fdc0cf 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -185,7 +185,7 @@  static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RO(modalias);
 
-static ssize_t enabled_store(struct device *dev, struct device_attribute *attr,
+static ssize_t enable_store(struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t count)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -210,7 +210,7 @@  static ssize_t enabled_store(struct device *dev, struct device_attribute *attr,
 	return result < 0 ? result : count;
 }
 
-static ssize_t enabled_show(struct device *dev, struct device_attribute *attr,
+static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
 			    char *buf)
 {
 	struct pci_dev *pdev;
@@ -218,7 +218,7 @@  static ssize_t enabled_show(struct device *dev, struct device_attribute *attr,
 	pdev = to_pci_dev(dev);
 	return sprintf(buf, "%u\n", atomic_read(&pdev->enable_cnt));
 }
-static DEVICE_ATTR_RW(enabled);
+static DEVICE_ATTR_RW(enable);
 
 #ifdef CONFIG_NUMA
 static ssize_t numa_node_show(struct device *dev, struct device_attribute *attr,
@@ -563,7 +563,7 @@  static struct attribute *pci_dev_attrs[] = {
 #endif
 	&dev_attr_dma_mask_bits.attr,
 	&dev_attr_consistent_dma_mask_bits.attr,
-	&dev_attr_enabled.attr,
+	&dev_attr_enable.attr,
 	&dev_attr_broken_parity_status.attr,
 	&dev_attr_msi_bus.attr,
 #if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)