@@ -385,7 +385,7 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
{
struct xilinx_pcie_port *port = (struct xilinx_pcie_port *)data;
struct device *dev = port->dev;
- u32 val, mask, status, msi_data;
+ u32 val, mask, status;
/* Read interrupt decode and mask registers */
val = pcie_read(port, XILINX_PCIE_REG_IDR);
@@ -425,8 +425,7 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
xilinx_pcie_clear_err_interrupts(port);
}
- if (status & XILINX_PCIE_INTR_INTX) {
- /* INTx interrupt received */
+ if (status & (XILINX_PCIE_INTR_INTX | XILINX_PCIE_INTR_MSI)) {
val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
/* Check whether interrupt valid */
@@ -435,41 +434,24 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
goto error;
}
- if (!(val & XILINX_PCIE_RPIFR1_MSI_INTR)) {
- /* Clear interrupt FIFO register 1 */
- pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
- XILINX_PCIE_REG_RPIFR1);
-
- /* Handle INTx Interrupt */
+ /* Decode the IRQ number */
+ if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
+ val = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
+ XILINX_PCIE_RPIFR2_MSG_DATA;
+ } else {
val = (val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
XILINX_PCIE_RPIFR1_INTR_SHIFT;
- generic_handle_irq(irq_find_mapping(port->leg_domain,
- val));
+ val = irq_find_mapping(port->leg_domain, val);
}
- }
- if (status & XILINX_PCIE_INTR_MSI) {
- /* MSI Interrupt */
- val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
+ /* Clear interrupt FIFO register 1 */
+ pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
+ XILINX_PCIE_REG_RPIFR1);
- if (!(val & XILINX_PCIE_RPIFR1_INTR_VALID)) {
- dev_warn(dev, "RP Intr FIFO1 read error\n");
- goto error;
- }
-
- if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
- msi_data = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
- XILINX_PCIE_RPIFR2_MSG_DATA;
-
- /* Clear interrupt FIFO register 1 */
- pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
- XILINX_PCIE_REG_RPIFR1);
-
- if (IS_ENABLED(CONFIG_PCI_MSI)) {
- /* Handle MSI Interrupt */
- generic_handle_irq(msi_data);
- }
- }
+ /* Handle the interrupt */
+ if (IS_ENABLED(CONFIG_PCI_MSI) ||
+ !(val & XILINX_PCIE_RPIFR1_MSI_INTR))
+ generic_handle_irq(val);
}
if (status & XILINX_PCIE_INTR_SLV_UNSUPP)
The INTx & MSI interrupt decode paths duplicated a fair bit of common functionality. They also strictly handled interrupts in order of INTx then MSI, so if both types of interrupt were to be asserted simultaneously and the MSI interrupt were first in the FIFO then the INTx code would read it & ignore it before the MSI code then had to read it again, wasting the original FIFO read. Unify the INTx & MSI decode in order to reduce that duplication & allow a single FIFO read to be performed for each interrupt regardless of its type. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Bharat Kumar Gogada <bharatku@xilinx.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ravikiran Gummaluri <rgummal@xilinx.com> Cc: linux-pci@vger.kernel.org --- Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None drivers/pci/host/pcie-xilinx.c | 48 +++++++++++++----------------------------- 1 file changed, 15 insertions(+), 33 deletions(-)