diff mbox

[v2,1/2] powerpc/pci: convert to use for_each_pci_bridge() helper

Message ID 20171110175230.82522-1-andriy.shevchenko@linux.intel.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Andy Shevchenko Nov. 10, 2017, 5:52 p.m. UTC
...which makes code slightly cleaner.

Requires: d43f59ce6c50 ("PCI: Add for_each_pci_bridge() helper")
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 arch/powerpc/kernel/pci-hotplug.c | 7 ++-----
 arch/powerpc/kernel/pci_of_scan.c | 7 ++-----
 2 files changed, 4 insertions(+), 10 deletions(-)

Comments

Bjorn Helgaas Nov. 22, 2017, 8:12 p.m. UTC | #1
On Fri, Nov 10, 2017 at 07:52:29PM +0200, Andy Shevchenko wrote:
> ...which makes code slightly cleaner.
> 
> Requires: d43f59ce6c50 ("PCI: Add for_each_pci_bridge() helper")

Requires: 24a0c654d7d6 ("PCI: Add for_each_pci_bridge() helper")

(My fault, I rebased that commit before sending it to Linus.)

> Acked-by: Michael Ellerman <mpe@ellerman.id.au>

These don't depend on anything in the PCI core, so they could go
either via my tree or the powerpc tree.  Since you acked this,
Michael, I corrected the SHA1 above and put these both on my pci/misc
branch.

If you pick them up, let me know and I'll drop them from my tree.

> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  arch/powerpc/kernel/pci-hotplug.c | 7 ++-----
>  arch/powerpc/kernel/pci_of_scan.c | 7 ++-----
>  2 files changed, 4 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
> index 2d71269e7dc1..741f47295188 100644
> --- a/arch/powerpc/kernel/pci-hotplug.c
> +++ b/arch/powerpc/kernel/pci-hotplug.c
> @@ -134,11 +134,8 @@ void pci_hp_add_devices(struct pci_bus *bus)
>  		pcibios_setup_bus_devices(bus);
>  		max = bus->busn_res.start;
>  		for (pass = 0; pass < 2; pass++) {
> -			list_for_each_entry(dev, &bus->devices, bus_list) {
> -				if (pci_is_bridge(dev))
> -					max = pci_scan_bridge(bus, dev,
> -							      max, pass);
> -			}
> +			for_each_pci_bridge(dev, bus)
> +				max = pci_scan_bridge(bus, dev, max, pass);
>  		}
>  	}
>  	pcibios_finish_adding_to_bus(bus);
> diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
> index 0d790f8432d2..8bdaa2a6fa62 100644
> --- a/arch/powerpc/kernel/pci_of_scan.c
> +++ b/arch/powerpc/kernel/pci_of_scan.c
> @@ -369,11 +369,8 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
>  	pcibios_setup_bus_devices(bus);
>  
>  	/* Now scan child busses */
> -	list_for_each_entry(dev, &bus->devices, bus_list) {
> -		if (pci_is_bridge(dev)) {
> -			of_scan_pci_bridge(dev);
> -		}
> -	}
> +	for_each_pci_bridge(dev, bus)
> +		of_scan_pci_bridge(dev);
>  }
>  
>  /**
> -- 
> 2.14.2
>
Michael Ellerman Nov. 23, 2017, 12:48 p.m. UTC | #2
Bjorn Helgaas <helgaas@kernel.org> writes:

> On Fri, Nov 10, 2017 at 07:52:29PM +0200, Andy Shevchenko wrote:
>> ...which makes code slightly cleaner.
>> 
>> Requires: d43f59ce6c50 ("PCI: Add for_each_pci_bridge() helper")
>
> Requires: 24a0c654d7d6 ("PCI: Add for_each_pci_bridge() helper")
>
> (My fault, I rebased that commit before sending it to Linus.)
>
>> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
>
> These don't depend on anything in the PCI core, so they could go
> either via my tree or the powerpc tree.  Since you acked this,
> Michael, I corrected the SHA1 above and put these both on my pci/misc
> branch.

Thanks. That's aiming for 4.16 I assume?

cheers
Bjorn Helgaas Nov. 27, 2017, 6:03 p.m. UTC | #3
On Thu, Nov 23, 2017 at 11:48:18PM +1100, Michael Ellerman wrote:
> Bjorn Helgaas <helgaas@kernel.org> writes:
> 
> > On Fri, Nov 10, 2017 at 07:52:29PM +0200, Andy Shevchenko wrote:
> >> ...which makes code slightly cleaner.
> >> 
> >> Requires: d43f59ce6c50 ("PCI: Add for_each_pci_bridge() helper")
> >
> > Requires: 24a0c654d7d6 ("PCI: Add for_each_pci_bridge() helper")
> >
> > (My fault, I rebased that commit before sending it to Linus.)
> >
> >> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
> >
> > These don't depend on anything in the PCI core, so they could go
> > either via my tree or the powerpc tree.  Since you acked this,
> > Michael, I corrected the SHA1 above and put these both on my pci/misc
> > branch.
> 
> Thanks. That's aiming for 4.16 I assume?

Right.
diff mbox

Patch

diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 2d71269e7dc1..741f47295188 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -134,11 +134,8 @@  void pci_hp_add_devices(struct pci_bus *bus)
 		pcibios_setup_bus_devices(bus);
 		max = bus->busn_res.start;
 		for (pass = 0; pass < 2; pass++) {
-			list_for_each_entry(dev, &bus->devices, bus_list) {
-				if (pci_is_bridge(dev))
-					max = pci_scan_bridge(bus, dev,
-							      max, pass);
-			}
+			for_each_pci_bridge(dev, bus)
+				max = pci_scan_bridge(bus, dev, max, pass);
 		}
 	}
 	pcibios_finish_adding_to_bus(bus);
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 0d790f8432d2..8bdaa2a6fa62 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -369,11 +369,8 @@  static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
 	pcibios_setup_bus_devices(bus);
 
 	/* Now scan child busses */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		if (pci_is_bridge(dev)) {
-			of_scan_pci_bridge(dev);
-		}
-	}
+	for_each_pci_bridge(dev, bus)
+		of_scan_pci_bridge(dev);
 }
 
 /**