diff mbox series

pci/sriov: Hold rescan lock while enumerating

Message ID 20180809163356.18650-1-keith.busch@intel.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show
Series pci/sriov: Hold rescan lock while enumerating | expand

Commit Message

Keith Busch Aug. 9, 2018, 4:33 p.m. UTC
PCI enumeration/de-enumeration needs to run single threaded to prevent
race conditions with other threads changing the topology. Altering the
number of virtual functions was not taking the rescan/remove lock hile
adding or removing those virtual functions, so this patch adds that.

Reported-by: Krzysztof Wierzbicki <krzysztof.wierzbicki@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <keith.busch@intel.com>
---
 drivers/pci/pci-sysfs.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Lukas Wunner Aug. 9, 2018, 5:58 p.m. UTC | #1
On Thu, Aug 09, 2018 at 10:33:56AM -0600, Keith Busch wrote:
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -591,6 +591,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
>  	if (num_vfs > pci_sriov_get_totalvfs(pdev))
>  		return -ERANGE;
>  
> +	pci_lock_rescan_remove();
>  	device_lock(&pdev->dev);

Doesn't this obviate the need to hold the device_lock()?  What could
otherwise run concurrently that doesn't hold pci_lock_rescan_remove()
and would cause a race condition?

Thanks,

Lukas
Keith Busch Aug. 9, 2018, 6:05 p.m. UTC | #2
On Thu, Aug 09, 2018 at 07:58:19PM +0200, Lukas Wunner wrote:
> On Thu, Aug 09, 2018 at 10:33:56AM -0600, Keith Busch wrote:
> > --- a/drivers/pci/pci-sysfs.c
> > +++ b/drivers/pci/pci-sysfs.c
> > @@ -591,6 +591,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
> >  	if (num_vfs > pci_sriov_get_totalvfs(pdev))
> >  		return -ERANGE;
> >  
> > +	pci_lock_rescan_remove();
> >  	device_lock(&pdev->dev);
> 
> Doesn't this obviate the need to hold the device_lock()?  What could
> otherwise run concurrently that doesn't hold pci_lock_rescan_remove()
> and would cause a race condition?

The device_lock is still needed to protect against concurrent
pci_reset_function.
Bjorn Helgaas Sept. 5, 2018, 8:58 p.m. UTC | #3
[+cc Lukas, -stable]

On Thu, Aug 09, 2018 at 10:33:56AM -0600, Keith Busch wrote:
> PCI enumeration/de-enumeration needs to run single threaded to prevent
> race conditions with other threads changing the topology. Altering the
> number of virtual functions was not taking the rescan/remove lock hile
> adding or removing those virtual functions, so this patch adds that.
> 
> Reported-by: Krzysztof Wierzbicki <krzysztof.wierzbicki@intel.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Keith Busch <keith.busch@intel.com>
> ---
>  drivers/pci/pci-sysfs.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 9ecfe13157c0..611abe220b6f 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -591,6 +591,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
>  	if (num_vfs > pci_sriov_get_totalvfs(pdev))
>  		return -ERANGE;
>  
> +	pci_lock_rescan_remove();

I assume the usual path is something like this, where we end up in
pci_enable_sriov():

  sriov_numvfs_store
+   pci_lock_rescan_remove
    pdev->driver->sriov_configure
      ...
        pci_enable_sriov
          sriov_enable
            pci_iov_add_virtfn
              pci_alloc_dev
              pci_device_add

But what about the other paths leading to pci_iov_add_virtfn()?  Don't
we need similar locking for all of them?  

>  	device_lock(&pdev->dev);
>  
>  	if (num_vfs == pdev->sriov->num_VFs)
> @@ -627,6 +628,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
>  
>  exit:
>  	device_unlock(&pdev->dev);
> +	pci_unlock_rescan_remove();
>  
>  	if (ret < 0)
>  		return ret;
> -- 
> 2.14.4
>
Keith Busch Sept. 5, 2018, 9:12 p.m. UTC | #4
On Wed, Sep 05, 2018 at 03:58:40PM -0500, Bjorn Helgaas wrote:
> [+cc Lukas, -stable]
> 
> On Thu, Aug 09, 2018 at 10:33:56AM -0600, Keith Busch wrote:
> > PCI enumeration/de-enumeration needs to run single threaded to prevent
> > race conditions with other threads changing the topology. Altering the
> > number of virtual functions was not taking the rescan/remove lock hile
> > adding or removing those virtual functions, so this patch adds that.
> > 
> > Reported-by: Krzysztof Wierzbicki <krzysztof.wierzbicki@intel.com>
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Keith Busch <keith.busch@intel.com>
> > ---
> >  drivers/pci/pci-sysfs.c | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> > index 9ecfe13157c0..611abe220b6f 100644
> > --- a/drivers/pci/pci-sysfs.c
> > +++ b/drivers/pci/pci-sysfs.c
> > @@ -591,6 +591,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
> >  	if (num_vfs > pci_sriov_get_totalvfs(pdev))
> >  		return -ERANGE;
> >  
> > +	pci_lock_rescan_remove();
> 
> I assume the usual path is something like this, where we end up in
> pci_enable_sriov():
> 
>   sriov_numvfs_store
> +   pci_lock_rescan_remove
>     pdev->driver->sriov_configure
>       ...
>         pci_enable_sriov
>           sriov_enable
>             pci_iov_add_virtfn
>               pci_alloc_dev
>               pci_device_add
> 
> But what about the other paths leading to pci_iov_add_virtfn()?  Don't
> we need similar locking for all of them?  

Good point. It looks like the only other path to pci_iov_add_virtfn is
through PPC eeh_reset_device, which coincidently enough already holds
pci_lock_rescan_remove.

It's not just pci_iov_add_virtfn, though. We also need to hold it during
pci_iov_remove_virtfn. PPC eeh_rmv_device is not holding the lock in
that path. I'll never be able to test with that h/w, but I'll look at it.

> >  	device_lock(&pdev->dev);
> >  
> >  	if (num_vfs == pdev->sriov->num_VFs)
> > @@ -627,6 +628,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
> >  
> >  exit:
> >  	device_unlock(&pdev->dev);
> > +	pci_unlock_rescan_remove();
> >  
> >  	if (ret < 0)
> >  		return ret;
> > -- 
> > 2.14.4
> >
Bjorn Helgaas Sept. 5, 2018, 10:13 p.m. UTC | #5
On Wed, Sep 05, 2018 at 03:12:41PM -0600, Keith Busch wrote:
> On Wed, Sep 05, 2018 at 03:58:40PM -0500, Bjorn Helgaas wrote:
> > [+cc Lukas, -stable]
> > 
> > On Thu, Aug 09, 2018 at 10:33:56AM -0600, Keith Busch wrote:
> > > PCI enumeration/de-enumeration needs to run single threaded to prevent
> > > race conditions with other threads changing the topology. Altering the
> > > number of virtual functions was not taking the rescan/remove lock hile
> > > adding or removing those virtual functions, so this patch adds that.
> > > 
> > > Reported-by: Krzysztof Wierzbicki <krzysztof.wierzbicki@intel.com>
> > > Cc: stable@vger.kernel.org
> > > Signed-off-by: Keith Busch <keith.busch@intel.com>
> > > ---
> > >  drivers/pci/pci-sysfs.c | 2 ++
> > >  1 file changed, 2 insertions(+)
> > > 
> > > diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> > > index 9ecfe13157c0..611abe220b6f 100644
> > > --- a/drivers/pci/pci-sysfs.c
> > > +++ b/drivers/pci/pci-sysfs.c
> > > @@ -591,6 +591,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
> > >  	if (num_vfs > pci_sriov_get_totalvfs(pdev))
> > >  		return -ERANGE;
> > >  
> > > +	pci_lock_rescan_remove();
> > 
> > I assume the usual path is something like this, where we end up in
> > pci_enable_sriov():
> > 
> >   sriov_numvfs_store
> > +   pci_lock_rescan_remove
> >     pdev->driver->sriov_configure
> >       ...
> >         pci_enable_sriov
> >           sriov_enable
> >             pci_iov_add_virtfn
> >               pci_alloc_dev
> >               pci_device_add
> > 
> > But what about the other paths leading to pci_iov_add_virtfn()?  Don't
> > we need similar locking for all of them?  
> 
> Good point. It looks like the only other path to pci_iov_add_virtfn is
> through PPC eeh_reset_device, which coincidently enough already holds
> pci_lock_rescan_remove.

There are a few .probe() methods that call pci_enable_sriov(), which leads
to pci_iov_add_virtfn():

  cavium_rng_probe
  cpt_probe
  enic_probe
  be_probe -> be_setup -> be_vf_setup
  igb_probe -> igb_sw_init -> igb_probe_vfs -> igb_enable_sriov
  ...

> It's not just pci_iov_add_virtfn, though. We also need to hold it during
> pci_iov_remove_virtfn. PPC eeh_rmv_device is not holding the lock in
> that path. I'll never be able to test with that h/w, but I'll look at it.
> 
> > >  	device_lock(&pdev->dev);
> > >  
> > >  	if (num_vfs == pdev->sriov->num_VFs)
> > > @@ -627,6 +628,7 @@ static ssize_t sriov_numvfs_store(struct device *dev,
> > >  
> > >  exit:
> > >  	device_unlock(&pdev->dev);
> > > +	pci_unlock_rescan_remove();
> > >  
> > >  	if (ret < 0)
> > >  		return ret;
> > > -- 
> > > 2.14.4
> > >
diff mbox series

Patch

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 9ecfe13157c0..611abe220b6f 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -591,6 +591,7 @@  static ssize_t sriov_numvfs_store(struct device *dev,
 	if (num_vfs > pci_sriov_get_totalvfs(pdev))
 		return -ERANGE;
 
+	pci_lock_rescan_remove();
 	device_lock(&pdev->dev);
 
 	if (num_vfs == pdev->sriov->num_VFs)
@@ -627,6 +628,7 @@  static ssize_t sriov_numvfs_store(struct device *dev,
 
 exit:
 	device_unlock(&pdev->dev);
+	pci_unlock_rescan_remove();
 
 	if (ret < 0)
 		return ret;