From patchwork Thu Jan 23 23:29:42 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Remi Pommarel X-Patchwork-Id: 11349331 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 9C87914B4 for ; Thu, 23 Jan 2020 23:22:45 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 77B9721D7E for ; Thu, 23 Jan 2020 23:22:45 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729959AbgAWXWg (ORCPT ); Thu, 23 Jan 2020 18:22:36 -0500 Received: from relay1-d.mail.gandi.net ([217.70.183.193]:38391 "EHLO relay1-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729949AbgAWXWg (ORCPT ); Thu, 23 Jan 2020 18:22:36 -0500 X-Originating-IP: 88.190.179.123 Received: from localhost (unknown [88.190.179.123]) (Authenticated sender: repk@triplefau.lt) by relay1-d.mail.gandi.net (Postfix) with ESMTPSA id 1A621240002; Thu, 23 Jan 2020 23:22:31 +0000 (UTC) From: Remi Pommarel To: Kishon Vijay Abraham I , Yue Wang , Kevin Hilman , Lorenzo Pieralisi , Bjorn Helgaas , Neil Armstrong , Martin Blumenstingl , Rob Herring Cc: Jerome Brunet , linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-pci@vger.kernel.org, Remi Pommarel Subject: [PATCH v6 6/7] phy: amlogic: Add Amlogic AXG PCIE PHY Driver Date: Fri, 24 Jan 2020 00:29:42 +0100 Message-Id: <20200123232943.10229-7-repk@triplefau.lt> X-Mailer: git-send-email 2.24.1 In-Reply-To: <20200123232943.10229-1-repk@triplefau.lt> References: <20200123232943.10229-1-repk@triplefau.lt> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org This adds support for the PCI PHY found in the Amlogic AXG SoC Family. This will allow to mutualize code in pci-meson.c between AXG and G12A SoC. This PHY also uses and chains an analog PHY, which on AXG platform is needed to have reliable PCIe communication. Signed-off-by: Remi Pommarel Reviewed-by: Neil Armstrong Acked-by: Kishon Vijay Abraham I --- drivers/phy/amlogic/Kconfig | 11 ++ drivers/phy/amlogic/Makefile | 1 + drivers/phy/amlogic/phy-meson-axg-pcie.c | 192 +++++++++++++++++++++++ 3 files changed, 204 insertions(+) create mode 100644 drivers/phy/amlogic/phy-meson-axg-pcie.c diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index 8c9cf2403591..71801e30d601 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -60,6 +60,17 @@ config PHY_MESON_G12A_USB3_PCIE in Meson G12A SoCs. If unsure, say N. +config PHY_MESON_AXG_PCIE + tristate "Meson AXG PCIE PHY driver" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + select GENERIC_PHY + select REGMAP_MMIO + help + Enable this to support the Meson MIPI + PCIE PHY found + in Meson AXG SoCs. + If unsure, say N. + config PHY_MESON_AXG_MIPI_PCIE_ANALOG tristate "Meson AXG MIPI + PCIE analog PHY driver" default ARCH_MESON diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index 0aecf92d796a..e2baa133f7af 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -4,4 +4,5 @@ obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o +obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c new file mode 100644 index 000000000000..377ed0dcd0d9 --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Amlogic AXG PCIE PHY driver + * + * Copyright (C) 2020 Remi Pommarel + */ +#include +#include +#include +#include +#include +#include +#include + +#define MESON_PCIE_REG0 0x00 +#define MESON_PCIE_COMMON_CLK BIT(4) +#define MESON_PCIE_PORT_SEL GENMASK(3, 2) +#define MESON_PCIE_CLK BIT(1) +#define MESON_PCIE_POWERDOWN BIT(0) + +#define MESON_PCIE_TWO_X1 FIELD_PREP(MESON_PCIE_PORT_SEL, 0x3) +#define MESON_PCIE_COMMON_REF_CLK FIELD_PREP(MESON_PCIE_COMMON_CLK, 0x1) +#define MESON_PCIE_PHY_INIT (MESON_PCIE_TWO_X1 | \ + MESON_PCIE_COMMON_REF_CLK) +#define MESON_PCIE_RESET_DELAY 500 + +struct phy_axg_pcie_priv { + struct phy *phy; + struct phy *analog; + struct regmap *regmap; + struct reset_control *reset; +}; + +static const struct regmap_config phy_axg_pcie_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = MESON_PCIE_REG0, +}; + +static int phy_axg_pcie_power_on(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_power_on(priv->analog); + if (ret != 0) + return ret; + + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, + MESON_PCIE_POWERDOWN, 0); + return 0; +} + +static int phy_axg_pcie_power_off(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_power_off(priv->analog); + if (ret != 0) + return ret; + + regmap_update_bits(priv->regmap, MESON_PCIE_REG0, + MESON_PCIE_POWERDOWN, 1); + return 0; +} + +static int phy_axg_pcie_init(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_init(priv->analog); + if (ret != 0) + return ret; + + regmap_write(priv->regmap, MESON_PCIE_REG0, MESON_PCIE_PHY_INIT); + return reset_control_reset(priv->reset); +} + +static int phy_axg_pcie_exit(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = phy_exit(priv->analog); + if (ret != 0) + return ret; + + return reset_control_reset(priv->reset); +} + +static int phy_axg_pcie_reset(struct phy *phy) +{ + struct phy_axg_pcie_priv *priv = phy_get_drvdata(phy); + int ret = 0; + + ret = phy_reset(priv->analog); + if (ret != 0) + goto out; + + ret = reset_control_assert(priv->reset); + if (ret != 0) + goto out; + udelay(MESON_PCIE_RESET_DELAY); + + ret = reset_control_deassert(priv->reset); + if (ret != 0) + goto out; + udelay(MESON_PCIE_RESET_DELAY); + +out: + return ret; +} + +static const struct phy_ops phy_axg_pcie_ops = { + .init = phy_axg_pcie_init, + .exit = phy_axg_pcie_exit, + .power_on = phy_axg_pcie_power_on, + .power_off = phy_axg_pcie_power_off, + .reset = phy_axg_pcie_reset, + .owner = THIS_MODULE, +}; + +static int phy_axg_pcie_probe(struct platform_device *pdev) +{ + struct phy_provider *pphy; + struct device *dev = &pdev->dev; + struct phy_axg_pcie_priv *priv; + struct device_node *np = dev->of_node; + struct resource *res; + void __iomem *base; + int ret; + + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->phy = devm_phy_create(dev, np, &phy_axg_pcie_ops); + if (IS_ERR(priv->phy)) { + ret = PTR_ERR(priv->phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_axg_pcie_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->reset = devm_reset_control_array_get(dev, false, false); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + priv->analog = devm_phy_get(dev, "analog"); + if (IS_ERR(priv->analog)) + return PTR_ERR(priv->analog); + + phy_set_drvdata(priv->phy, priv); + dev_set_drvdata(dev, priv); + pphy = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(pphy); +} + +static const struct of_device_id phy_axg_pcie_of_match[] = { + { + .compatible = "amlogic,axg-pcie-phy", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_axg_pcie_of_match); + +static struct platform_driver phy_axg_pcie_driver = { + .probe = phy_axg_pcie_probe, + .driver = { + .name = "phy-axg-pcie", + .of_match_table = phy_axg_pcie_of_match, + }, +}; +module_platform_driver(phy_axg_pcie_driver); + +MODULE_AUTHOR("Remi Pommarel "); +MODULE_DESCRIPTION("Amlogic AXG PCIE PHY driver"); +MODULE_LICENSE("GPL v2");