From patchwork Tue May 5 16:13:15 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11529607 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4A385139A for ; Tue, 5 May 2020 16:14:00 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 387672084D for ; Tue, 5 May 2020 16:14:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729289AbgEEQNv (ORCPT ); Tue, 5 May 2020 12:13:51 -0400 Received: from mx2.suse.de ([195.135.220.15]:53008 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730171AbgEEQN2 (ORCPT ); Tue, 5 May 2020 12:13:28 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id 4B6EDAF5D; Tue, 5 May 2020 16:13:29 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, helgaas@kernel.org, linux-kernel@vger.kernel.org, Nicolas Saenz Julienne , Ray Jui , Scott Branden , bcm-kernel-feedback-list@broadcom.com Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org Subject: [PATCH v8 2/4] firmware: raspberrypi: Introduce vl805 init routine Date: Tue, 5 May 2020 18:13:15 +0200 Message-Id: <20200505161318.26200-3-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200505161318.26200-1-nsaenzjulienne@suse.de> References: <20200505161318.26200-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that implements xHCI. After a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's co-processor, VideoCore. RPi4's VideoCore OS contains both the non public firmware load logic and the VL805 firmware blob. The function this patch introduces triggers the aforementioned process. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Rob Herring Tested-by: Stefan Wahren Tested-by: Stefan Wahren --- Change since v7: - Use usleep_delay() - Add comment about PCI errors - Don't wait on error - Typos Change since v6: - Add test to avoid loading the firmware when not needed - Since we have it around, print VL805's firmware version, it'll make debugging easier in the future - Correct typos - Add a clearer view of HW topology in patch description Changes since v4: - Inline function definition when RASPBERRYPI_FIRMWARE is not defined Changes since v1: - Move include into .c file and add forward declaration to .h drivers/firmware/raspberrypi.c | 61 ++++++++++++++++++++++ include/soc/bcm2835/raspberrypi-firmware.h | 7 +++ 2 files changed, 68 insertions(+) diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index da26a584dca0..a166ad0cec2c 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include #define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf)) @@ -19,6 +21,8 @@ #define MBOX_DATA28(msg) ((msg) & ~0xf) #define MBOX_CHAN_PROPERTY 8 +#define VL805_PCI_CONFIG_VERSION_OFFSET 0x50 + static struct platform_device *rpi_hwmon; static struct platform_device *rpi_clk; @@ -286,6 +290,63 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) } EXPORT_SYMBOL_GPL(rpi_firmware_get); +/* + * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that + * implements xHCI. After a PCI reset, VL805's firmware may either be loaded + * directly from an EEPROM or, if not present, by the SoC's co-processor, + * VideoCore. RPi4's VideoCore OS contains both the non public firmware load + * logic and the VL805 firmware blob. This function triggers the aforementioned + * process. + */ +int rpi_firmware_init_vl805(struct pci_dev *pdev) +{ + struct device_node *fw_np; + struct rpi_firmware *fw; + u32 dev_addr, version; + int ret; + + fw_np = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (!fw_np) + return 0; + + fw = rpi_firmware_get(fw_np); + of_node_put(fw_np); + if (!fw) + return -ENODEV; + + /* + * Make sure we don't trigger a firmware load unnecessarily. + * + * If something went wrong with PCI, this whole exercise would be + * futile as VideoCore expects from us a configured PCI bus. Just take + * the faulty version (likely ~0) and let xHCI's registration fail + * further down the line. + */ + pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version); + if (version) + goto exit; + + dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | + PCI_FUNC(pdev->devfn) << 12; + + ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, + &dev_addr, sizeof(dev_addr)); + if (ret) + return ret; + + /* Wait for vl805 to startup */ + usleep_range(200, 1000); + + pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, + &version); +exit: + pci_info(pdev, "VL805 firmware version %08x\n", version); + + return 0; +} +EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); + static const struct of_device_id rpi_firmware_of_match[] = { { .compatible = "raspberrypi,bcm2835-firmware", }, {}, diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index cc9cdbc66403..3025aca3c358 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -10,6 +10,7 @@ #include struct rpi_firmware; +struct pci_dev; enum rpi_firmware_property_status { RPI_FIRMWARE_STATUS_REQUEST = 0, @@ -141,6 +142,7 @@ int rpi_firmware_property(struct rpi_firmware *fw, int rpi_firmware_property_list(struct rpi_firmware *fw, void *data, size_t tag_size); struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); +int rpi_firmware_init_vl805(struct pci_dev *pdev); #else static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag, void *data, size_t len) @@ -158,6 +160,11 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware { return NULL; } + +static inline int rpi_firmware_init_vl805(struct pci_dev *pdev) +{ + return 0; +} #endif #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */