From patchwork Tue May 5 16:13:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11529591 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 6002C1392 for ; Tue, 5 May 2020 16:13:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 524AE20575 for ; Tue, 5 May 2020 16:13:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730364AbgEEQNb (ORCPT ); Tue, 5 May 2020 12:13:31 -0400 Received: from mx2.suse.de ([195.135.220.15]:53056 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730190AbgEEQNa (ORCPT ); Tue, 5 May 2020 12:13:30 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id 3372DAF7A; Tue, 5 May 2020 16:13:31 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, helgaas@kernel.org, linux-kernel@vger.kernel.org, Nicolas Saenz Julienne , Lorenzo Pieralisi , Rob Herring , bcm-kernel-feedback-list@broadcom.com Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, Bjorn Helgaas Subject: [PATCH v8 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present Date: Tue, 5 May 2020 18:13:16 +0200 Message-Id: <20200505161318.26200-4-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200505161318.26200-1-nsaenzjulienne@suse.de> References: <20200505161318.26200-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org xHCI's PCI fixup, run at the end of pcie-brcmstb's probe, depends on RPi4's VideoCore firmware interface to be up and running. It's possible for both initializations to race, so make sure it's available prior to starting. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Reviewed-by: Rob Herring --- Changes since v6: - Add more complete comment drivers/pci/controller/pcie-brcmstb.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 6d79d14527a6..0b97b94c4a9a 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -28,6 +28,8 @@ #include #include +#include + #include "../pci.h" /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ @@ -917,11 +919,26 @@ static int brcm_pcie_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node, *msi_np; struct pci_host_bridge *bridge; + struct device_node *fw_np; struct brcm_pcie *pcie; struct pci_bus *child; struct resource *res; int ret; + /* + * We have to wait for Raspberry Pi's firmware interface to be up as a + * PCI fixup, rpi_firmware_init_vl805(), depends on it. This driver's + * probe can race with the firmware interface's (see + * drivers/firmware/raspberrypi.c) and potentially break the PCI fixup. + */ + fw_np = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (fw_np && !rpi_firmware_get(fw_np)) { + of_node_put(fw_np); + return -EPROBE_DEFER; + } + of_node_put(fw_np); + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); if (!bridge) return -ENOMEM;