From patchwork Tue May 5 16:13:17 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nicolas Saenz Julienne X-Patchwork-Id: 11529599 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 86341139A for ; Tue, 5 May 2020 16:13:40 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 7126620838 for ; Tue, 5 May 2020 16:13:40 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730519AbgEEQNf (ORCPT ); Tue, 5 May 2020 12:13:35 -0400 Received: from mx2.suse.de ([195.135.220.15]:53008 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730095AbgEEQNc (ORCPT ); Tue, 5 May 2020 12:13:32 -0400 X-Virus-Scanned: by amavisd-new at test-mx.suse.de Received: from relay2.suse.de (unknown [195.135.220.254]) by mx2.suse.de (Postfix) with ESMTP id 80D21AF4F; Tue, 5 May 2020 16:13:32 +0000 (UTC) From: Nicolas Saenz Julienne To: f.fainelli@gmail.com, gregkh@linuxfoundation.org, wahrenst@gmx.net, helgaas@kernel.org, linux-kernel@vger.kernel.org, Mathias Nyman Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, tim.gover@raspberrypi.org, linux-pci@vger.kernel.org, Nicolas Saenz Julienne Subject: [PATCH v8 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk Date: Tue, 5 May 2020 18:13:17 +0200 Message-Id: <20200505161318.26200-5-nsaenzjulienne@suse.de> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200505161318.26200-1-nsaenzjulienne@suse.de> References: <20200505161318.26200-1-nsaenzjulienne@suse.de> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be loaded directly from an EEPROM or, if not present, by the SoC's VideoCore. Inform VideoCore that VL805 was just reset. Also, as this creates a dependency between USB_PCI and VideoCore's firmware interface, and since USB_PCI can't be set as a module neither this can. Reflect that on the firmware interface Kconfg. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Rob Herring Acked-by: Mathias Nyman --- Changes since v5: - Fix Kconfig issue with allmodconfig Changes since v4: - Do not split up error message Changes since v3: - Add more complete error message Changes since v1: - Make RASPBERRYPI_FIRMWARE dependent on this quirk to make sure it gets compiled when needed. drivers/firmware/Kconfig | 3 ++- drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++ 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 8007d4aa76dc..b42140cff8ac 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -178,8 +178,9 @@ config ISCSI_IBFT Otherwise, say N. config RASPBERRYPI_FIRMWARE - tristate "Raspberry Pi Firmware Driver" + bool "Raspberry Pi Firmware Driver" depends on BCM2835_MBOX + default USB_PCI help This option enables support for communicating with the firmware on the Raspberry Pi. diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 92150ecdb036..0b949acfa258 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -16,6 +16,9 @@ #include #include #include + +#include + #include "pci-quirks.h" #include "xhci-ext-caps.h" @@ -1243,11 +1246,24 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) static void quirk_usb_early_handoff(struct pci_dev *pdev) { + int ret; + /* Skip Netlogic mips SoC's internal PCI USB controller. * This device does not need/support EHCI/OHCI handoff */ if (pdev->vendor == 0x184e) /* vendor Netlogic */ return; + + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { + ret = rpi_firmware_init_vl805(pdev); + if (ret) { + /* Firmware might be outdated, or something failed */ + dev_warn(&pdev->dev, + "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n", + ret); + } + } + if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && pdev->class != PCI_CLASS_SERIAL_USB_OHCI && pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&