diff mbox series

[v4,06/12] PCI: pciehp: Check if pcie_capability_read_*() reads ~0

Message ID 20200731110240.98326-7-refactormyself@gmail.com
State New
Delegated to: Bjorn Helgaas
Headers show
Series PCI: Remove '*val = 0' from pcie_capability_read_*() | expand

Commit Message

Saheed Olayemi Bolarinwa July 31, 2020, 11:02 a.m. UTC
On failure pcie_capability_read_word() sets it's last parameter, val
to 0. However, with Patch 12/12, it is possible that val is set to
~0 on failure. This introduces a bug because (x & x) == (~0 & x).

Since ~0 is an invalid value here,

pciehp_get_power_status():
Add an extra check for ~0 on the value read. If found, set status
to 'Power On' and return.

pcie_wait_for_presence():
Add an extra check for no ~0 to the exit condition of the loop

Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
---
 drivers/pci/hotplug/pciehp_hpc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index b89c9ee4a3b5..39305aabc3a2 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -278,7 +278,7 @@  static void pcie_wait_for_presence(struct pci_dev *pdev)
 
 	do {
 		pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-		if (slot_status & PCI_EXP_SLTSTA_PDS)
+		if ((slot_status != (u16)~0) && (slot_status & PCI_EXP_SLTSTA_PDS))
 			return;
 		msleep(10);
 		timeout -= 10;
@@ -399,6 +399,11 @@  void pciehp_get_power_status(struct controller *ctrl, u8 *status)
 	ctrl_dbg(ctrl, "%s: SLOTCTRL %x value read %x\n", __func__,
 		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl);
 
+	if (slot_ctrl == (u16)~0) {
+		*status = 1;    /* On */
+		return;
+	}
+
 	switch (slot_ctrl & PCI_EXP_SLTCTL_PCC) {
 	case PCI_EXP_SLTCTL_PWR_OFF:
 		*status = 0;	/* Off */