diff mbox series

[v17,3/3] PCI: microchip: Add host driver for Microchip PCIe controller

Message ID 20201022132223.17789-4-daire.mcnamara@microchip.com
State Changes Requested
Delegated to: Lorenzo Pieralisi
Headers show
Series PCI: microchip: Add host driver for Microchip PCIe controller | expand

Commit Message

Daire McNamara Oct. 22, 2020, 1:22 p.m. UTC
From: Daire McNamara <daire.mcnamara@microchip.com>

Add support for the Microchip PolarFire PCIe controller when
configured in host (Root Complex) mode.

Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
---
 drivers/pci/controller/Kconfig               |  10 +
 drivers/pci/controller/Makefile              |   1 +
 drivers/pci/controller/pcie-microchip-host.c | 541 +++++++++++++++++++
 3 files changed, 552 insertions(+)
 create mode 100644 drivers/pci/controller/pcie-microchip-host.c

Comments

Ben Dooks Oct. 28, 2020, 5:21 p.m. UTC | #1
Hi, I have tried applying these patches to the v5.6.16 yocto kernel
supplied for the Icicle board. I've assumed this is a v5.9 patch set
as they don't apply cleanly to v5.6.16 so rebased up to v5.9

The PCie is failing to initialise on the icicle board. Is there
anything else needing to be done to get it working on this board?

Log excerpt from board boot:

> [    2.435747] microchip-pcie e0000000.pci: host bridge /pci@E0000000 ranges:
> [    2.442580] microchip-pcie e0000000.pci: Parsing ranges property...
> [    2.442611] microchip-pcie e0000000.pci:      MEM 0x00e8000000..0x00efffffff -> 0x00e8000000
> [    2.451177] microchip-pcie e0000000.pci: non-prefetchable memory resource required
> [    2.460943] microchip-pcie e0000000.pci: ECAM at [mem 0xe0000000-0xe7ffffff] : ESC[Bfor [bus 00-7f]
> [    2.469607] microchip-pcie e0000000.pci: PCI host bridge to bus 0000:00
> [    2.476287] pci_bus 0000:00: root bus resource [bus 00-7f]
> [    2.481724] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xefffffff pre: ESC[Bf]
> [    2.489186] pci_bus 0000:00: scanning bus
> [    2.489283] pci 0000:00:00.0: [11aa:1556] type 01 class 0x040000
> [    2.495328] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff 64bit pref: ESC[B]
> [    2.502610] pci 0000:00:00.0: supports D1 D2
> [    2.506942] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    2.513544] pci 0000:00:00.0: PME# disabled
> [    2.514859] pci_bus 0000:00: fixups for bus
> [    2.514882] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
> [    2.514900] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
> [    2.522847] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
> [    2.522972] pci_bus 0000:01: scanning bus
> [    2.573878] pci_bus 0000:01: fixups for bus
> [    2.573897] pci_bus 0000:01: bus scan returning with max=01
> [    2.573918] pci_bus 0000:01: busn_res: [bus 01-7f] end is updated to 01
> [    2.580477] pci_bus 0000:00: bus scan returning with max=01
> [    2.580530] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000 64bit pref]
> [    2.588195] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000 64bit pref]
> [    2.596168] pci 0000:00:00.0: BAR 8: no space for [mem size 0x00200000]
> [    2.602782] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x00200000]
> [    2.609887] pci 0000:00:00.0: BAR 9: assigned [mem 0xe8000000-0xe81fffff 64bit pref]
> [    2.617692] pci 0000:00:00.0: BAR 7: no space for [io  size 0x1000]
> [    2.624028] pci 0000:00:00.0: BAR 7: failed to assign [io  size 0x1000]
> [    2.630646] pci 0000:00:00.0: PCI bridge to [bus 01]
>     2.635780] pci 0000:00:00.0:   bridge window [mem 0xe8000000-0xe81fffff 64bi: ESC[Bt pref]
Ben Dooks Nov. 2, 2020, 11:15 a.m. UTC | #2
On 02/11/2020 10:39, Daire.McNamara@microchip.com wrote:
> Hi Ben,
> 
> Yes, we've become aware of an issue that's cropped up with latest design file on Icicle with PCIe.  We're working through it and we'll update once we have resolved it.

Thanks for looking at this.

We could really do with this working as we need faster storage
and graphics options for what we want to do with these boards.

I am happy to reinstall or rebuild images, i've got a v5.9 that
works to an extent on the icicles.
Lorenzo Pieralisi Nov. 18, 2020, 4:35 p.m. UTC | #3
On Thu, Oct 22, 2020 at 02:22:23PM +0100, daire.mcnamara@microchip.com wrote:
> From: Daire McNamara <daire.mcnamara@microchip.com>
> 
> Add support for the Microchip PolarFire PCIe controller when
> configured in host (Root Complex) mode.
> 
> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
> ---
>  drivers/pci/controller/Kconfig               |  10 +
>  drivers/pci/controller/Makefile              |   1 +
>  drivers/pci/controller/pcie-microchip-host.c | 541 +++++++++++++++++++

You should add a MAINTAINERS entry for this host controller if you
want it to go upstream, which means that getting it in the kernel
is just the beginning not an end by itself because I don't have
this HW - it will be up to you to maintain it.

Lorenzo

>  3 files changed, 552 insertions(+)
>  create mode 100644 drivers/pci/controller/pcie-microchip-host.c
> 
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index 4a7afbe189f8..8d8cd0d040bf 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -297,6 +297,16 @@ config PCI_LOONGSON
>  	  Say Y here if you want to enable PCI controller support on
>  	  Loongson systems.
>  
> +config PCIE_MICROCHIP_HOST
> +	bool "Microchip AXI PCIe host bridge support"
> +	depends on PCI_MSI && OF
> +	select PCI_MSI_IRQ_DOMAIN
> +	select GENERIC_MSI_IRQ_DOMAIN
> +	select PCI_HOST_COMMON
> +	help
> +	  Say Y here if you want kernel to support the Microchip AXI PCIe
> +	  Host Bridge driver.
> +
>  source "drivers/pci/controller/dwc/Kconfig"
>  source "drivers/pci/controller/mobiveil/Kconfig"
>  source "drivers/pci/controller/cadence/Kconfig"
> diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> index bcdbf49ab1e4..fcbbee94dc51 100644
> --- a/drivers/pci/controller/Makefile
> +++ b/drivers/pci/controller/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
>  obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
>  obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
>  obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
> +obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
>  obj-$(CONFIG_VMD) += vmd.o
>  obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
>  obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
> diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
> new file mode 100644
> index 000000000000..16099154458f
> --- /dev/null
> +++ b/drivers/pci/controller/pcie-microchip-host.c
> @@ -0,0 +1,541 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Microchip AXI PCIe Bridge host controller driver
> + *
> + * Copyright (c) 2018 - 2020 Microchip Corporation. All rights reserved.
> + *
> + * Author: Daire McNamara <daire.mcnamara@microchip.com>
> + *
> + * Based on:
> + *	pcie-rcar.c
> + *	pcie-xilinx.c
> + *	pcie-altera.c
> + */
> +
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/pci-ecam.h>
> +#include <linux/platform_device.h>
> +
> +#include "../pci.h"
> +
> +/* Number of MSI IRQs */
> +#define MC_NUM_MSI_IRQS				32
> +#define MC_NUM_MSI_IRQS_CODED			5
> +
> +/* PCIe Bridge Phy and Controller Phy offsets */
> +#define MC_PCIE1_BRIDGE_ADDR			0x00008000u
> +#define MC_PCIE1_CTRL_ADDR			0x0000a000u
> +
> +/* PCIe Controller Phy Regs */
> +#define MC_SEC_ERROR_INT			0x28
> +#define  SEC_ERROR_INT_TX_RAM_SEC_ERR_INT	GENMASK(3, 0)
> +#define  SEC_ERROR_INT_RX_RAM_SEC_ERR_INT	GENMASK(7, 4)
> +#define  SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT	GENMASK(11, 8)
> +#define  SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT	GENMASK(15, 12)
> +#define MC_SEC_ERROR_INT_MASK			0x2c
> +#define MC_DED_ERROR_INT			0x30
> +#define  DED_ERROR_INT_TX_RAM_DED_ERR_INT	GENMASK(3, 0)
> +#define  DED_ERROR_INT_RX_RAM_DED_ERR_INT	GENMASK(7, 4)
> +#define  DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT	GENMASK(11, 8)
> +#define  DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT	GENMASK(15, 12)
> +#define MC_DED_ERROR_INT_MASK			0x34
> +#define MC_ECC_CONTROL				0x38
> +#define  ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS	BIT(27)
> +#define  ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS	BIT(26)
> +#define  ECC_CONTROL_RX_RAM_ECC_BYPASS		BIT(25)
> +#define  ECC_CONTROL_TX_RAM_ECC_BYPASS		BIT(24)
> +#define MC_LTSSM_STATE				0x5c
> +#define  LTSSM_L0_STATE				0x10
> +#define MC_PCIE_EVENT_INT			0x14c
> +#define  PCIE_EVENT_INT_L2_EXIT_INT		BIT(0)
> +#define  PCIE_EVENT_INT_HOTRST_EXIT_INT		BIT(1)
> +#define  PCIE_EVENT_INT_DLUP_EXIT_INT		BIT(2)
> +#define  PCIE_EVENT_INT_L2_EXIT_INT_MASK	BIT(16)
> +#define  PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK	BIT(17)
> +#define  PCIE_EVENT_INT_DLUP_EXIT_INT_MASK	BIT(18)
> +
> +/* PCIe Bridge Phy Regs */
> +#define MC_PCIE_PCI_IDS_DW1			0x9c
> +
> +/* PCIe Config space MSI capability structure */
> +#define MC_MSI_CAP_CTRL_OFFSET			0xe0u
> +#define  MC_MSI_MAX_Q_AVAIL			(MC_NUM_MSI_IRQS_CODED << 1)
> +#define  MC_MSI_Q_SIZE				(MC_NUM_MSI_IRQS_CODED << 4)
> +
> +#define MC_IMASK_LOCAL				0x180
> +#define  PCIE_LOCAL_INT_ENABLE			0x0f000000u
> +#define  PCI_INTS				0x0f000000u
> +#define  PM_MSI_INT_SHIFT			24
> +#define  PCIE_ENABLE_MSI			0x10000000u
> +#define  MSI_INT				0x10000000u
> +#define  MSI_INT_SHIFT				28
> +#define MC_ISTATUS_LOCAL			0x184
> +#define MC_IMASK_HOST				0x188
> +#define MC_ISTATUS_HOST				0x18c
> +#define MC_MSI_ADDR				0x190
> +#define MC_ISTATUS_MSI				0x194
> +
> +/* PCIe Master table init defines */
> +#define MC_ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
> +#define  ATR0_PCIE_ATR_SIZE			0x1f
> +#define  ATR0_PCIE_ATR_SIZE_SHIFT		1
> +#define MC_ATR0_PCIE_WIN0_SRC_ADDR		0x604u
> +#define MC_ATR0_PCIE_WIN0_TRSL_ADDR_LSB		0x608u
> +#define MC_ATR0_PCIE_WIN0_TRSL_ADDR_UDW		0x60cu
> +#define MC_ATR0_PCIE_WIN0_TRSL_PARAM		0x610u
> +
> +/* PCIe AXI slave table init defines */
> +#define MC_ATR0_AXI4_SLV0_SRCADDR_PARAM		0x800u
> +#define  ATR_SIZE_SHIFT				1
> +#define  ATR_IMPL_ENABLE			1
> +#define MC_ATR0_AXI4_SLV0_SRC_ADDR		0x804u
> +#define MC_ATR0_AXI4_SLV0_TRSL_ADDR_LSB		0x808u
> +#define MC_ATR0_AXI4_SLV0_TRSL_ADDR_UDW		0x80cu
> +#define MC_ATR0_AXI4_SLV0_TRSL_PARAM		0x810u
> +#define  PCIE_TX_RX_INTERFACE			0x00000000u
> +#define  PCIE_CONFIG_INTERFACE			0x00000001u
> +
> +#define ATR_ENTRY_SIZE				32
> +
> +struct mc_msi {
> +	struct mutex lock;		/* Protect used bitmap */
> +	struct irq_domain *msi_domain;
> +	struct irq_domain *dev_domain;
> +	u32 num_vectors;
> +	u64 vector_phy;
> +	DECLARE_BITMAP(used, MC_NUM_MSI_IRQS);
> +};
> +
> +struct mc_port {
> +	void __iomem *axi_base_addr;
> +	struct device *dev;
> +	struct irq_domain *intx_domain;
> +	raw_spinlock_t intx_mask_lock;
> +	struct mc_msi msi;
> +};
> +
> +static void mc_pcie_isr(struct irq_desc *desc)
> +{
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +	struct mc_port *port = irq_desc_get_handler_data(desc);
> +	struct device *dev = port->dev;
> +	struct mc_msi *msi = &port->msi;
> +	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
> +	u32 status;
> +	unsigned long intx_status;
> +	unsigned long msi_status;
> +	u32 bit;
> +	u32 virq;
> +
> +	/*
> +	 * The core provides a single interrupt for both INTx/MSI messages.
> +	 * So we'll read both INTx and MSI status.
> +	 */
> +	chained_irq_enter(chip, desc);
> +
> +	status = readl_relaxed(bridge_base_addr + MC_ISTATUS_LOCAL);
> +	while (status & (PCI_INTS | MSI_INT)) {
> +		intx_status = (status & PCI_INTS) >> PM_MSI_INT_SHIFT;
> +		for_each_set_bit(bit, &intx_status, PCI_NUM_INTX) {
> +			virq = irq_find_mapping(port->intx_domain, bit + 1);
> +			if (virq)
> +				generic_handle_irq(virq);
> +			else
> +				dev_err_ratelimited(dev, "bad INTx IRQ %d\n", bit);
> +
> +			/* Clear that interrupt bit */
> +			writel_relaxed(1 << (bit + PM_MSI_INT_SHIFT), bridge_base_addr +
> +				       MC_ISTATUS_LOCAL);
> +		}
> +
> +		msi_status = (status & MSI_INT);
> +		if (msi_status) {
> +			msi_status = readl_relaxed(bridge_base_addr + MC_ISTATUS_MSI);
> +			for_each_set_bit(bit, &msi_status, msi->num_vectors) {
> +				virq = irq_find_mapping(msi->dev_domain, bit);
> +				if (virq)
> +					generic_handle_irq(virq);
> +				else
> +					dev_err_ratelimited(dev, "bad MSI IRQ %d\n", bit);
> +
> +				/* Clear that MSI interrupt bit */
> +				writel_relaxed((1 << bit), bridge_base_addr + MC_ISTATUS_MSI);
> +			}
> +			/* Clear the ISTATUS MSI bit */
> +			writel_relaxed(1 << MSI_INT_SHIFT, bridge_base_addr + MC_ISTATUS_LOCAL);
> +		}
> +
> +		status = readl_relaxed(bridge_base_addr + MC_ISTATUS_LOCAL);
> +	}
> +
> +	chained_irq_exit(chip, desc);
> +}
> +
> +static void mc_pcie_enable_msi(struct mc_port *port, void __iomem *base)
> +{
> +	struct mc_msi *msi = &port->msi;
> +	u32 cap_offset = MC_MSI_CAP_CTRL_OFFSET;
> +	u16 msg_ctrl = readw_relaxed(base + cap_offset + PCI_MSI_FLAGS);
> +
> +	msg_ctrl |= PCI_MSI_FLAGS_ENABLE;
> +	msg_ctrl &= ~PCI_MSI_FLAGS_QMASK;
> +	msg_ctrl |= MC_MSI_MAX_Q_AVAIL;
> +	msg_ctrl &= ~PCI_MSI_FLAGS_QSIZE;
> +	msg_ctrl |= MC_MSI_Q_SIZE;
> +	msg_ctrl |= PCI_MSI_FLAGS_64BIT;
> +
> +	writew_relaxed(msg_ctrl, base + cap_offset + PCI_MSI_FLAGS);
> +
> +	writel_relaxed(lower_32_bits(msi->vector_phy), base + cap_offset + PCI_MSI_ADDRESS_LO);
> +	writel_relaxed(upper_32_bits(msi->vector_phy), base + cap_offset + PCI_MSI_ADDRESS_HI);
> +}
> +
> +static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> +{
> +	struct mc_port *port = irq_data_get_irq_chip_data(data);
> +	phys_addr_t addr = port->msi.vector_phy;
> +
> +	msg->address_lo = lower_32_bits(addr);
> +	msg->address_hi = upper_32_bits(addr);
> +	msg->data = data->hwirq;
> +
> +	dev_dbg(port->dev, "msi#%x address_hi %#x address_lo %#x\n", (int)data->hwirq,
> +		msg->address_hi, msg->address_lo);
> +}
> +
> +static int mc_msi_set_affinity(struct irq_data *irq_data, const struct cpumask *mask, bool force)
> +{
> +	return -EINVAL;
> +}
> +
> +static struct irq_chip mc_msi_bottom_irq_chip = {
> +	.name = "Microchip MSI",
> +	.irq_compose_msi_msg = mc_compose_msi_msg,
> +	.irq_set_affinity = mc_msi_set_affinity,
> +};
> +
> +static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
> +				   unsigned int nr_irqs, void *args)
> +{
> +	struct mc_port *port = domain->host_data;
> +	struct mc_msi *msi = &port->msi;
> +	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
> +	unsigned long bit;
> +	u32 reg;
> +
> +	WARN_ON(nr_irqs != 1);
> +	mutex_lock(&msi->lock);
> +	bit = find_first_zero_bit(msi->used, msi->num_vectors);
> +	if (bit >= msi->num_vectors) {
> +		mutex_unlock(&msi->lock);
> +		return -ENOSPC;
> +	}
> +
> +	set_bit(bit, msi->used);
> +
> +	irq_domain_set_info(domain, virq, bit, &mc_msi_bottom_irq_chip, domain->host_data,
> +			    handle_simple_irq, NULL, NULL);
> +
> +	/* Enable MSI interrupts */
> +	reg = readl_relaxed(bridge_base_addr + MC_IMASK_LOCAL);
> +	reg |= PCIE_ENABLE_MSI;
> +	writel_relaxed(reg, bridge_base_addr + MC_IMASK_LOCAL);
> +
> +	mutex_unlock(&msi->lock);
> +
> +	return 0;
> +}
> +
> +static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
> +				   unsigned int nr_irqs)
> +{
> +	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
> +	struct mc_port *port = irq_data_get_irq_chip_data(d);
> +	struct mc_msi *msi = &port->msi;
> +
> +	mutex_lock(&msi->lock);
> +
> +	if (test_bit(d->hwirq, msi->used))
> +		__clear_bit(d->hwirq, msi->used);
> +	else
> +		dev_err(port->dev, "trying to free unused MSI%lu\n", d->hwirq);
> +
> +	mutex_unlock(&msi->lock);
> +}
> +
> +static const struct irq_domain_ops msi_domain_ops = {
> +	.alloc	= mc_irq_msi_domain_alloc,
> +	.free	= mc_irq_msi_domain_free,
> +};
> +
> +static struct irq_chip mc_msi_irq_chip = {
> +	.name = "Microchip PCIe MSI",
> +	.irq_mask = pci_msi_mask_irq,
> +	.irq_unmask = pci_msi_unmask_irq,
> +};
> +
> +static struct msi_domain_info mc_msi_domain_info = {
> +	.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | MSI_FLAG_PCI_MSIX),
> +	.chip = &mc_msi_irq_chip,
> +};
> +
> +static int mc_allocate_msi_domains(struct mc_port *port)
> +{
> +	struct device *dev = port->dev;
> +	struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
> +	struct mc_msi *msi = &port->msi;
> +
> +	mutex_init(&port->msi.lock);
> +
> +	msi->dev_domain = irq_domain_add_linear(NULL, msi->num_vectors, &msi_domain_ops, port);
> +	if (!msi->dev_domain) {
> +		dev_err(dev, "failed to create IRQ domain\n");
> +		return -ENOMEM;
> +	}
> +
> +	msi->msi_domain = pci_msi_create_irq_domain(fwnode, &mc_msi_domain_info, msi->dev_domain);
> +	if (!msi->msi_domain) {
> +		dev_err(dev, "failed to create MSI domain\n");
> +		irq_domain_remove(msi->dev_domain);
> +		return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +
> +static void mc_mask_intx_irq(struct irq_data *data)
> +{
> +	struct mc_port *port = irq_data_get_irq_chip_data(data);
> +	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
> +	unsigned long flags;
> +	u32 val;
> +
> +	raw_spin_lock_irqsave(&port->intx_mask_lock, flags);
> +	val = readl_relaxed(bridge_base_addr + MC_IMASK_LOCAL);
> +	val &= ~PCIE_LOCAL_INT_ENABLE;
> +	writel_relaxed(val, bridge_base_addr + MC_IMASK_LOCAL);
> +	raw_spin_unlock_irqrestore(&port->intx_mask_lock, flags);
> +}
> +
> +static void mc_unmask_intx_irq(struct irq_data *data)
> +{
> +	struct mc_port *port = irq_data_get_irq_chip_data(data);
> +	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
> +	unsigned long flags;
> +	u32 val;
> +
> +	raw_spin_lock_irqsave(&port->intx_mask_lock, flags);
> +	val = readl_relaxed(bridge_base_addr + MC_IMASK_LOCAL);
> +	val |= PCIE_LOCAL_INT_ENABLE;
> +	writel_relaxed(val, bridge_base_addr + MC_IMASK_LOCAL);
> +	raw_spin_unlock_irqrestore(&port->intx_mask_lock, flags);
> +}
> +
> +static struct irq_chip mc_intx_irq_chip = {
> +	.name = "Microchip PCIe INTx",
> +	.irq_mask = mc_mask_intx_irq,
> +	.irq_unmask = mc_unmask_intx_irq,
> +};
> +
> +static int mc_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
> +			    irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_and_handler(irq, &mc_intx_irq_chip, handle_simple_irq);
> +	irq_set_chip_data(irq, domain->host_data);
> +
> +	return 0;
> +}
> +
> +static const struct irq_domain_ops intx_domain_ops = {
> +	.map = mc_pcie_intx_map,
> +};
> +
> +static int mc_pcie_init_irq_domains(struct mc_port *port)
> +{
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +
> +	port->intx_domain = irq_domain_add_linear(node, PCI_NUM_INTX, &intx_domain_ops, port);
> +	if (!port->intx_domain) {
> +		dev_err(dev, "failed to get an INTx IRQ domain\n");
> +		return -ENOMEM;
> +	}
> +	raw_spin_lock_init(&port->intx_mask_lock);
> +
> +	return mc_allocate_msi_domains(port);
> +}
> +
> +static void mc_setup_window(void __iomem *bridge_base_addr, u32 index, phys_addr_t axi_addr,
> +			    phys_addr_t pci_addr, size_t size)
> +{
> +	u32 atr_sz = ilog2(size) - 1;
> +	u32 val;
> +
> +	if (index == 0)
> +		val = PCIE_CONFIG_INTERFACE;
> +	else
> +		val = PCIE_TX_RX_INTERFACE;
> +
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + MC_ATR0_AXI4_SLV0_TRSL_PARAM);
> +
> +	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) | ATR_IMPL_ENABLE;
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       MC_ATR0_AXI4_SLV0_SRCADDR_PARAM);
> +
> +	val = upper_32_bits(axi_addr);
> +
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       MC_ATR0_AXI4_SLV0_SRC_ADDR);
> +
> +	val = lower_32_bits(pci_addr);
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       MC_ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
> +
> +	val = upper_32_bits(pci_addr);
> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
> +	       MC_ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
> +
> +	val = readl(bridge_base_addr + MC_ATR0_PCIE_WIN0_SRCADDR_PARAM);
> +	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
> +	writel(val, bridge_base_addr + MC_ATR0_PCIE_WIN0_SRCADDR_PARAM);
> +	writel(0, bridge_base_addr + MC_ATR0_PCIE_WIN0_SRC_ADDR);
> +}
> +
> +static int mc_setup_windows(struct platform_device *pdev, struct mc_port *port)
> +{
> +	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
> +	struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
> +	struct resource_entry *entry;
> +	u64 pci_addr;
> +	u32 index = 1;
> +
> +	resource_list_for_each_entry(entry, &bridge->windows) {
> +		if (resource_type(entry->res) == IORESOURCE_MEM) {
> +			pci_addr = entry->res->start - entry->offset;
> +			mc_setup_window(bridge_base_addr, index, entry->res->start,
> +					pci_addr, resource_size(entry->res));
> +			index++;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int mc_platform_init(struct pci_config_window *cfg)
> +{
> +	struct device *dev = cfg->parent;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct mc_port *port;
> +	void __iomem *bridge_base_addr;
> +	void __iomem *ctrl_base_addr;
> +	int ret;
> +	int irq;
> +	u32 val;
> +
> +	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> +	if (!port)
> +		return -ENOMEM;
> +	port->dev = dev;
> +
> +	port->axi_base_addr = devm_platform_ioremap_resource(pdev, 1);
> +	if (IS_ERR(port->axi_base_addr))
> +		return PTR_ERR(port->axi_base_addr);
> +
> +	bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
> +	ctrl_base_addr = port->axi_base_addr + MC_PCIE1_CTRL_ADDR;
> +
> +	port->msi.vector_phy = MC_MSI_ADDR;
> +	port->msi.num_vectors = MC_NUM_MSI_IRQS;
> +	ret = mc_pcie_init_irq_domains(port);
> +	if (ret) {
> +		dev_err(dev, "failed creating IRQ domains\n");
> +		return ret;
> +	}
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(dev, "unable to request IRQ%d\n", irq);
> +		return -ENODEV;
> +	}
> +
> +	irq_set_chained_handler_and_data(irq, mc_pcie_isr, port);
> +
> +	/* Hardware doesn't setup MSI by default */
> +	mc_pcie_enable_msi(port, cfg->win);
> +
> +	val = PCIE_ENABLE_MSI | PCIE_LOCAL_INT_ENABLE;
> +	writel_relaxed(val, bridge_base_addr + MC_IMASK_LOCAL);
> +
> +	val = readl_relaxed(bridge_base_addr + MC_LTSSM_STATE);
> +	val |= LTSSM_L0_STATE;
> +	writel_relaxed(val, bridge_base_addr + MC_LTSSM_STATE);
> +
> +	val = ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS | ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS |
> +	      ECC_CONTROL_RX_RAM_ECC_BYPASS | ECC_CONTROL_TX_RAM_ECC_BYPASS;
> +	writel_relaxed(val, ctrl_base_addr + MC_ECC_CONTROL);
> +
> +	val = PCIE_EVENT_INT_L2_EXIT_INT | PCIE_EVENT_INT_HOTRST_EXIT_INT |
> +	      PCIE_EVENT_INT_DLUP_EXIT_INT | PCIE_EVENT_INT_L2_EXIT_INT_MASK |
> +	      PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK | PCIE_EVENT_INT_DLUP_EXIT_INT_MASK;
> +	writel_relaxed(val, ctrl_base_addr + MC_PCIE_EVENT_INT);
> +
> +	val = SEC_ERROR_INT_TX_RAM_SEC_ERR_INT | SEC_ERROR_INT_RX_RAM_SEC_ERR_INT |
> +	      SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT | SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT;
> +	writel_relaxed(val, ctrl_base_addr + MC_SEC_ERROR_INT);
> +	writel_relaxed(val, ctrl_base_addr + MC_SEC_ERROR_INT_MASK);
> +
> +	val = DED_ERROR_INT_TX_RAM_DED_ERR_INT | DED_ERROR_INT_RX_RAM_DED_ERR_INT |
> +	      DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT | DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT;
> +	writel_relaxed(val, ctrl_base_addr + MC_DED_ERROR_INT);
> +	writel_relaxed(val, ctrl_base_addr + MC_DED_ERROR_INT_MASK);
> +
> +	writel_relaxed(0, bridge_base_addr + MC_IMASK_LOCAL);
> +	writel_relaxed(GENMASK(31, 0), bridge_base_addr + MC_ISTATUS_LOCAL);
> +	writel_relaxed(0, bridge_base_addr + MC_IMASK_HOST);
> +	writel_relaxed(GENMASK(31, 0), bridge_base_addr + MC_ISTATUS_HOST);
> +
> +	/* Configure Address Translation Table 0 for PCIe config space */
> +	mc_setup_window(bridge_base_addr, 0, cfg->res.start & 0xffffffff, cfg->res.start,
> +			resource_size(&cfg->res));
> +
> +	return mc_setup_windows(pdev, port);
> +}
> +
> +static const struct pci_ecam_ops mc_ecam_ops = {
> +	.bus_shift = 20,
> +	.init = mc_platform_init,
> +	.pci_ops = {
> +		.map_bus = pci_ecam_map_bus,
> +		.read = pci_generic_config_read,
> +		.write = pci_generic_config_write,
> +	}
> +};
> +
> +static const struct of_device_id mc_pcie_of_match[] = {
> +	{
> +		.compatible = "microchip,pcie-host-1.0",
> +		.data = &mc_ecam_ops,
> +	},
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(of, mc_pcie_of_match)
> +
> +static struct platform_driver mc_pcie_driver = {
> +	.probe = pci_host_common_probe,
> +	.driver = {
> +		.name = "microchip-pcie",
> +		.of_match_table = mc_pcie_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +};
> +
> +builtin_platform_driver(mc_pcie_driver);
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Microchip PCIe host controller driver");
> +MODULE_AUTHOR("Daire McNamara <daire.mcnamara@microchip.com>");
> -- 
> 2.25.1
>
Lorenzo Pieralisi Nov. 18, 2020, 4:39 p.m. UTC | #4
On Mon, Nov 02, 2020 at 11:15:25AM +0000, Ben Dooks wrote:
> On 02/11/2020 10:39, Daire.McNamara@microchip.com wrote:
> > Hi Ben,
> > 
> > Yes, we've become aware of an issue that's cropped up with latest design file on Icicle with PCIe.  We're working through it and we'll update once we have resolved it.
> 

Message above did not make it to linux-pci (list rejects anything that
is not plain text), this was a public discussion and must have stayed
so, thanks to Ben for posting back.

> Thanks for looking at this.
> 
> We could really do with this working as we need faster storage
> and graphics options for what we want to do with these boards.
> 
> I am happy to reinstall or rebuild images, i've got a v5.9 that
> works to an extent on the icicles.

Where's the fix for this ? It would be good to merge the driver with
no known regressions.

Thanks,
Lorenzo
Ben Dooks Nov. 18, 2020, 4:44 p.m. UTC | #5
On 02/11/2020 11:15, Ben Dooks wrote:
> On 02/11/2020 10:39, Daire.McNamara@microchip.com wrote:
>> Hi Ben,
>>
>> Yes, we've become aware of an issue that's cropped up with latest 
>> design file on Icicle with PCIe.  We're working through it and we'll 
>> update once we have resolved it.
> 
> Thanks for looking at this.

Any updates on the Icicle PCIe issue? We'd love to get some work
done with PCIe on these boards but are rather stuck at the moment.
Ben Dooks Nov. 18, 2020, 5:04 p.m. UTC | #6
On 18/11/2020 16:39, Lorenzo Pieralisi wrote:
> On Mon, Nov 02, 2020 at 11:15:25AM +0000, Ben Dooks wrote:
>> On 02/11/2020 10:39, Daire.McNamara@microchip.com wrote:
>>> Hi Ben,
>>>
>>> Yes, we've become aware of an issue that's cropped up with latest design file on Icicle with PCIe.  We're working through it and we'll update once we have resolved it.
>>
> 
> Message above did not make it to linux-pci (list rejects anything that
> is not plain text), this was a public discussion and must have stayed
> so, thanks to Ben for posting back.
> 
>> Thanks for looking at this.
>>
>> We could really do with this working as we need faster storage
>> and graphics options for what we want to do with these boards.
>>
>> I am happy to reinstall or rebuild images, i've got a v5.9 that
>> works to an extent on the icicles.
> 
> Where's the fix for this ? It would be good to merge the driver with
> no known regressions.

I don't know yet, I managed to get the icicle 5.6 up to 5.9 to allow
mering this series on. However it does not get to detect a PCIe card.

I can try and get some dmesg logs if that would be useful. The root
port seems to get seen and shows up in lspci.

I can't currently get to the boards physically due to the lockdown
and issues with getting to our offices.
Ben Dooks Nov. 23, 2020, 11:46 a.m. UTC | #7
On 23/11/2020 10:04, Daire.McNamara@microchip.com wrote:
> Hi Ben, Lorenzo,
> 
> We're working through a few issues with our FPGA design file to get PCIe working on our Icicle Kit board.  FYI, PCIe on PolarFire SoC is not directly connected the CPU complex, instead, it is routed through the FPGA fabric.  We believe we have resolved these issues around enabling/disabling clocks to FPGA fabric and memory protection layers and have been propagating the fixes through to our public facing FPGA and software repositories along with other unrelated improvements.  All going well, these changes will arrive shortly.

Thanks for looking a tthis.

> Ben, if you just want to use PCIe on Icicle Kit, the easiest path is probably to keep an eye on the README in our yocto-based repository @ https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp
> [https://avatars1.githubusercontent.com/u/51128733?s=400&v=4]<https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp>
> GitHub - polarfire-soc/meta-polarfire-soc-yocto-bsp: PolarFire SoC yocto Board Support Package<https://github.com/polarfire-soc/meta-polarfire-soc-yocto-bsp>
> Microchip PolarFire SoC Yocto BSP. Microchip Polarfire-SoC Yocto 'Board Support Package' (BSP) is based on OpenEmbedded (OE). The 'Polarfire SoC Yocto BSP' layer is build on top of the RISC-V Architectural layer (meta-riscv) to provide hardware specific features and additional disk images.
> github.com
> 
> Lorenzo, I'll post v18 of the driver, based on v5.10rc1, and roll up any fixes needed for this PFGA design file shortly. I'll also add MAINTAINERS section.

Is there any way the pcie driver could detect any of these issues and
flag up user facing message saying "FPGA configuration required for PCIe" ?

I will keep an eye on the yocto repo, the USB is also not working
under Linux yet.
diff mbox series

Patch

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 4a7afbe189f8..8d8cd0d040bf 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -297,6 +297,16 @@  config PCI_LOONGSON
 	  Say Y here if you want to enable PCI controller support on
 	  Loongson systems.
 
+config PCIE_MICROCHIP_HOST
+	bool "Microchip AXI PCIe host bridge support"
+	depends on PCI_MSI && OF
+	select PCI_MSI_IRQ_DOMAIN
+	select GENERIC_MSI_IRQ_DOMAIN
+	select PCI_HOST_COMMON
+	help
+	  Say Y here if you want kernel to support the Microchip AXI PCIe
+	  Host Bridge driver.
+
 source "drivers/pci/controller/dwc/Kconfig"
 source "drivers/pci/controller/mobiveil/Kconfig"
 source "drivers/pci/controller/cadence/Kconfig"
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index bcdbf49ab1e4..fcbbee94dc51 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
 obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
 obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
 obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
+obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
 obj-$(CONFIG_VMD) += vmd.o
 obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
 obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
new file mode 100644
index 000000000000..16099154458f
--- /dev/null
+++ b/drivers/pci/controller/pcie-microchip-host.c
@@ -0,0 +1,541 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip AXI PCIe Bridge host controller driver
+ *
+ * Copyright (c) 2018 - 2020 Microchip Corporation. All rights reserved.
+ *
+ * Author: Daire McNamara <daire.mcnamara@microchip.com>
+ *
+ * Based on:
+ *	pcie-rcar.c
+ *	pcie-xilinx.c
+ *	pcie-altera.c
+ */
+
+#include <linux/irqchip/chained_irq.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci-ecam.h>
+#include <linux/platform_device.h>
+
+#include "../pci.h"
+
+/* Number of MSI IRQs */
+#define MC_NUM_MSI_IRQS				32
+#define MC_NUM_MSI_IRQS_CODED			5
+
+/* PCIe Bridge Phy and Controller Phy offsets */
+#define MC_PCIE1_BRIDGE_ADDR			0x00008000u
+#define MC_PCIE1_CTRL_ADDR			0x0000a000u
+
+/* PCIe Controller Phy Regs */
+#define MC_SEC_ERROR_INT			0x28
+#define  SEC_ERROR_INT_TX_RAM_SEC_ERR_INT	GENMASK(3, 0)
+#define  SEC_ERROR_INT_RX_RAM_SEC_ERR_INT	GENMASK(7, 4)
+#define  SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT	GENMASK(11, 8)
+#define  SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT	GENMASK(15, 12)
+#define MC_SEC_ERROR_INT_MASK			0x2c
+#define MC_DED_ERROR_INT			0x30
+#define  DED_ERROR_INT_TX_RAM_DED_ERR_INT	GENMASK(3, 0)
+#define  DED_ERROR_INT_RX_RAM_DED_ERR_INT	GENMASK(7, 4)
+#define  DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT	GENMASK(11, 8)
+#define  DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT	GENMASK(15, 12)
+#define MC_DED_ERROR_INT_MASK			0x34
+#define MC_ECC_CONTROL				0x38
+#define  ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS	BIT(27)
+#define  ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS	BIT(26)
+#define  ECC_CONTROL_RX_RAM_ECC_BYPASS		BIT(25)
+#define  ECC_CONTROL_TX_RAM_ECC_BYPASS		BIT(24)
+#define MC_LTSSM_STATE				0x5c
+#define  LTSSM_L0_STATE				0x10
+#define MC_PCIE_EVENT_INT			0x14c
+#define  PCIE_EVENT_INT_L2_EXIT_INT		BIT(0)
+#define  PCIE_EVENT_INT_HOTRST_EXIT_INT		BIT(1)
+#define  PCIE_EVENT_INT_DLUP_EXIT_INT		BIT(2)
+#define  PCIE_EVENT_INT_L2_EXIT_INT_MASK	BIT(16)
+#define  PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK	BIT(17)
+#define  PCIE_EVENT_INT_DLUP_EXIT_INT_MASK	BIT(18)
+
+/* PCIe Bridge Phy Regs */
+#define MC_PCIE_PCI_IDS_DW1			0x9c
+
+/* PCIe Config space MSI capability structure */
+#define MC_MSI_CAP_CTRL_OFFSET			0xe0u
+#define  MC_MSI_MAX_Q_AVAIL			(MC_NUM_MSI_IRQS_CODED << 1)
+#define  MC_MSI_Q_SIZE				(MC_NUM_MSI_IRQS_CODED << 4)
+
+#define MC_IMASK_LOCAL				0x180
+#define  PCIE_LOCAL_INT_ENABLE			0x0f000000u
+#define  PCI_INTS				0x0f000000u
+#define  PM_MSI_INT_SHIFT			24
+#define  PCIE_ENABLE_MSI			0x10000000u
+#define  MSI_INT				0x10000000u
+#define  MSI_INT_SHIFT				28
+#define MC_ISTATUS_LOCAL			0x184
+#define MC_IMASK_HOST				0x188
+#define MC_ISTATUS_HOST				0x18c
+#define MC_MSI_ADDR				0x190
+#define MC_ISTATUS_MSI				0x194
+
+/* PCIe Master table init defines */
+#define MC_ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
+#define  ATR0_PCIE_ATR_SIZE			0x1f
+#define  ATR0_PCIE_ATR_SIZE_SHIFT		1
+#define MC_ATR0_PCIE_WIN0_SRC_ADDR		0x604u
+#define MC_ATR0_PCIE_WIN0_TRSL_ADDR_LSB		0x608u
+#define MC_ATR0_PCIE_WIN0_TRSL_ADDR_UDW		0x60cu
+#define MC_ATR0_PCIE_WIN0_TRSL_PARAM		0x610u
+
+/* PCIe AXI slave table init defines */
+#define MC_ATR0_AXI4_SLV0_SRCADDR_PARAM		0x800u
+#define  ATR_SIZE_SHIFT				1
+#define  ATR_IMPL_ENABLE			1
+#define MC_ATR0_AXI4_SLV0_SRC_ADDR		0x804u
+#define MC_ATR0_AXI4_SLV0_TRSL_ADDR_LSB		0x808u
+#define MC_ATR0_AXI4_SLV0_TRSL_ADDR_UDW		0x80cu
+#define MC_ATR0_AXI4_SLV0_TRSL_PARAM		0x810u
+#define  PCIE_TX_RX_INTERFACE			0x00000000u
+#define  PCIE_CONFIG_INTERFACE			0x00000001u
+
+#define ATR_ENTRY_SIZE				32
+
+struct mc_msi {
+	struct mutex lock;		/* Protect used bitmap */
+	struct irq_domain *msi_domain;
+	struct irq_domain *dev_domain;
+	u32 num_vectors;
+	u64 vector_phy;
+	DECLARE_BITMAP(used, MC_NUM_MSI_IRQS);
+};
+
+struct mc_port {
+	void __iomem *axi_base_addr;
+	struct device *dev;
+	struct irq_domain *intx_domain;
+	raw_spinlock_t intx_mask_lock;
+	struct mc_msi msi;
+};
+
+static void mc_pcie_isr(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct mc_port *port = irq_desc_get_handler_data(desc);
+	struct device *dev = port->dev;
+	struct mc_msi *msi = &port->msi;
+	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
+	u32 status;
+	unsigned long intx_status;
+	unsigned long msi_status;
+	u32 bit;
+	u32 virq;
+
+	/*
+	 * The core provides a single interrupt for both INTx/MSI messages.
+	 * So we'll read both INTx and MSI status.
+	 */
+	chained_irq_enter(chip, desc);
+
+	status = readl_relaxed(bridge_base_addr + MC_ISTATUS_LOCAL);
+	while (status & (PCI_INTS | MSI_INT)) {
+		intx_status = (status & PCI_INTS) >> PM_MSI_INT_SHIFT;
+		for_each_set_bit(bit, &intx_status, PCI_NUM_INTX) {
+			virq = irq_find_mapping(port->intx_domain, bit + 1);
+			if (virq)
+				generic_handle_irq(virq);
+			else
+				dev_err_ratelimited(dev, "bad INTx IRQ %d\n", bit);
+
+			/* Clear that interrupt bit */
+			writel_relaxed(1 << (bit + PM_MSI_INT_SHIFT), bridge_base_addr +
+				       MC_ISTATUS_LOCAL);
+		}
+
+		msi_status = (status & MSI_INT);
+		if (msi_status) {
+			msi_status = readl_relaxed(bridge_base_addr + MC_ISTATUS_MSI);
+			for_each_set_bit(bit, &msi_status, msi->num_vectors) {
+				virq = irq_find_mapping(msi->dev_domain, bit);
+				if (virq)
+					generic_handle_irq(virq);
+				else
+					dev_err_ratelimited(dev, "bad MSI IRQ %d\n", bit);
+
+				/* Clear that MSI interrupt bit */
+				writel_relaxed((1 << bit), bridge_base_addr + MC_ISTATUS_MSI);
+			}
+			/* Clear the ISTATUS MSI bit */
+			writel_relaxed(1 << MSI_INT_SHIFT, bridge_base_addr + MC_ISTATUS_LOCAL);
+		}
+
+		status = readl_relaxed(bridge_base_addr + MC_ISTATUS_LOCAL);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static void mc_pcie_enable_msi(struct mc_port *port, void __iomem *base)
+{
+	struct mc_msi *msi = &port->msi;
+	u32 cap_offset = MC_MSI_CAP_CTRL_OFFSET;
+	u16 msg_ctrl = readw_relaxed(base + cap_offset + PCI_MSI_FLAGS);
+
+	msg_ctrl |= PCI_MSI_FLAGS_ENABLE;
+	msg_ctrl &= ~PCI_MSI_FLAGS_QMASK;
+	msg_ctrl |= MC_MSI_MAX_Q_AVAIL;
+	msg_ctrl &= ~PCI_MSI_FLAGS_QSIZE;
+	msg_ctrl |= MC_MSI_Q_SIZE;
+	msg_ctrl |= PCI_MSI_FLAGS_64BIT;
+
+	writew_relaxed(msg_ctrl, base + cap_offset + PCI_MSI_FLAGS);
+
+	writel_relaxed(lower_32_bits(msi->vector_phy), base + cap_offset + PCI_MSI_ADDRESS_LO);
+	writel_relaxed(upper_32_bits(msi->vector_phy), base + cap_offset + PCI_MSI_ADDRESS_HI);
+}
+
+static void mc_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	struct mc_port *port = irq_data_get_irq_chip_data(data);
+	phys_addr_t addr = port->msi.vector_phy;
+
+	msg->address_lo = lower_32_bits(addr);
+	msg->address_hi = upper_32_bits(addr);
+	msg->data = data->hwirq;
+
+	dev_dbg(port->dev, "msi#%x address_hi %#x address_lo %#x\n", (int)data->hwirq,
+		msg->address_hi, msg->address_lo);
+}
+
+static int mc_msi_set_affinity(struct irq_data *irq_data, const struct cpumask *mask, bool force)
+{
+	return -EINVAL;
+}
+
+static struct irq_chip mc_msi_bottom_irq_chip = {
+	.name = "Microchip MSI",
+	.irq_compose_msi_msg = mc_compose_msi_msg,
+	.irq_set_affinity = mc_msi_set_affinity,
+};
+
+static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				   unsigned int nr_irqs, void *args)
+{
+	struct mc_port *port = domain->host_data;
+	struct mc_msi *msi = &port->msi;
+	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
+	unsigned long bit;
+	u32 reg;
+
+	WARN_ON(nr_irqs != 1);
+	mutex_lock(&msi->lock);
+	bit = find_first_zero_bit(msi->used, msi->num_vectors);
+	if (bit >= msi->num_vectors) {
+		mutex_unlock(&msi->lock);
+		return -ENOSPC;
+	}
+
+	set_bit(bit, msi->used);
+
+	irq_domain_set_info(domain, virq, bit, &mc_msi_bottom_irq_chip, domain->host_data,
+			    handle_simple_irq, NULL, NULL);
+
+	/* Enable MSI interrupts */
+	reg = readl_relaxed(bridge_base_addr + MC_IMASK_LOCAL);
+	reg |= PCIE_ENABLE_MSI;
+	writel_relaxed(reg, bridge_base_addr + MC_IMASK_LOCAL);
+
+	mutex_unlock(&msi->lock);
+
+	return 0;
+}
+
+static void mc_irq_msi_domain_free(struct irq_domain *domain, unsigned int virq,
+				   unsigned int nr_irqs)
+{
+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+	struct mc_port *port = irq_data_get_irq_chip_data(d);
+	struct mc_msi *msi = &port->msi;
+
+	mutex_lock(&msi->lock);
+
+	if (test_bit(d->hwirq, msi->used))
+		__clear_bit(d->hwirq, msi->used);
+	else
+		dev_err(port->dev, "trying to free unused MSI%lu\n", d->hwirq);
+
+	mutex_unlock(&msi->lock);
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.alloc	= mc_irq_msi_domain_alloc,
+	.free	= mc_irq_msi_domain_free,
+};
+
+static struct irq_chip mc_msi_irq_chip = {
+	.name = "Microchip PCIe MSI",
+	.irq_mask = pci_msi_mask_irq,
+	.irq_unmask = pci_msi_unmask_irq,
+};
+
+static struct msi_domain_info mc_msi_domain_info = {
+	.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | MSI_FLAG_PCI_MSIX),
+	.chip = &mc_msi_irq_chip,
+};
+
+static int mc_allocate_msi_domains(struct mc_port *port)
+{
+	struct device *dev = port->dev;
+	struct fwnode_handle *fwnode = of_node_to_fwnode(dev->of_node);
+	struct mc_msi *msi = &port->msi;
+
+	mutex_init(&port->msi.lock);
+
+	msi->dev_domain = irq_domain_add_linear(NULL, msi->num_vectors, &msi_domain_ops, port);
+	if (!msi->dev_domain) {
+		dev_err(dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	msi->msi_domain = pci_msi_create_irq_domain(fwnode, &mc_msi_domain_info, msi->dev_domain);
+	if (!msi->msi_domain) {
+		dev_err(dev, "failed to create MSI domain\n");
+		irq_domain_remove(msi->dev_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static void mc_mask_intx_irq(struct irq_data *data)
+{
+	struct mc_port *port = irq_data_get_irq_chip_data(data);
+	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
+	unsigned long flags;
+	u32 val;
+
+	raw_spin_lock_irqsave(&port->intx_mask_lock, flags);
+	val = readl_relaxed(bridge_base_addr + MC_IMASK_LOCAL);
+	val &= ~PCIE_LOCAL_INT_ENABLE;
+	writel_relaxed(val, bridge_base_addr + MC_IMASK_LOCAL);
+	raw_spin_unlock_irqrestore(&port->intx_mask_lock, flags);
+}
+
+static void mc_unmask_intx_irq(struct irq_data *data)
+{
+	struct mc_port *port = irq_data_get_irq_chip_data(data);
+	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
+	unsigned long flags;
+	u32 val;
+
+	raw_spin_lock_irqsave(&port->intx_mask_lock, flags);
+	val = readl_relaxed(bridge_base_addr + MC_IMASK_LOCAL);
+	val |= PCIE_LOCAL_INT_ENABLE;
+	writel_relaxed(val, bridge_base_addr + MC_IMASK_LOCAL);
+	raw_spin_unlock_irqrestore(&port->intx_mask_lock, flags);
+}
+
+static struct irq_chip mc_intx_irq_chip = {
+	.name = "Microchip PCIe INTx",
+	.irq_mask = mc_mask_intx_irq,
+	.irq_unmask = mc_unmask_intx_irq,
+};
+
+static int mc_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+			    irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &mc_intx_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops intx_domain_ops = {
+	.map = mc_pcie_intx_map,
+};
+
+static int mc_pcie_init_irq_domains(struct mc_port *port)
+{
+	struct device *dev = port->dev;
+	struct device_node *node = dev->of_node;
+
+	port->intx_domain = irq_domain_add_linear(node, PCI_NUM_INTX, &intx_domain_ops, port);
+	if (!port->intx_domain) {
+		dev_err(dev, "failed to get an INTx IRQ domain\n");
+		return -ENOMEM;
+	}
+	raw_spin_lock_init(&port->intx_mask_lock);
+
+	return mc_allocate_msi_domains(port);
+}
+
+static void mc_setup_window(void __iomem *bridge_base_addr, u32 index, phys_addr_t axi_addr,
+			    phys_addr_t pci_addr, size_t size)
+{
+	u32 atr_sz = ilog2(size) - 1;
+	u32 val;
+
+	if (index == 0)
+		val = PCIE_CONFIG_INTERFACE;
+	else
+		val = PCIE_TX_RX_INTERFACE;
+
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + MC_ATR0_AXI4_SLV0_TRSL_PARAM);
+
+	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) | ATR_IMPL_ENABLE;
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       MC_ATR0_AXI4_SLV0_SRCADDR_PARAM);
+
+	val = upper_32_bits(axi_addr);
+
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       MC_ATR0_AXI4_SLV0_SRC_ADDR);
+
+	val = lower_32_bits(pci_addr);
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       MC_ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
+
+	val = upper_32_bits(pci_addr);
+	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
+	       MC_ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
+
+	val = readl(bridge_base_addr + MC_ATR0_PCIE_WIN0_SRCADDR_PARAM);
+	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
+	writel(val, bridge_base_addr + MC_ATR0_PCIE_WIN0_SRCADDR_PARAM);
+	writel(0, bridge_base_addr + MC_ATR0_PCIE_WIN0_SRC_ADDR);
+}
+
+static int mc_setup_windows(struct platform_device *pdev, struct mc_port *port)
+{
+	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
+	struct pci_host_bridge *bridge = platform_get_drvdata(pdev);
+	struct resource_entry *entry;
+	u64 pci_addr;
+	u32 index = 1;
+
+	resource_list_for_each_entry(entry, &bridge->windows) {
+		if (resource_type(entry->res) == IORESOURCE_MEM) {
+			pci_addr = entry->res->start - entry->offset;
+			mc_setup_window(bridge_base_addr, index, entry->res->start,
+					pci_addr, resource_size(entry->res));
+			index++;
+		}
+	}
+
+	return 0;
+}
+
+static int mc_platform_init(struct pci_config_window *cfg)
+{
+	struct device *dev = cfg->parent;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct mc_port *port;
+	void __iomem *bridge_base_addr;
+	void __iomem *ctrl_base_addr;
+	int ret;
+	int irq;
+	u32 val;
+
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+	port->dev = dev;
+
+	port->axi_base_addr = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(port->axi_base_addr))
+		return PTR_ERR(port->axi_base_addr);
+
+	bridge_base_addr = port->axi_base_addr + MC_PCIE1_BRIDGE_ADDR;
+	ctrl_base_addr = port->axi_base_addr + MC_PCIE1_CTRL_ADDR;
+
+	port->msi.vector_phy = MC_MSI_ADDR;
+	port->msi.num_vectors = MC_NUM_MSI_IRQS;
+	ret = mc_pcie_init_irq_domains(port);
+	if (ret) {
+		dev_err(dev, "failed creating IRQ domains\n");
+		return ret;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "unable to request IRQ%d\n", irq);
+		return -ENODEV;
+	}
+
+	irq_set_chained_handler_and_data(irq, mc_pcie_isr, port);
+
+	/* Hardware doesn't setup MSI by default */
+	mc_pcie_enable_msi(port, cfg->win);
+
+	val = PCIE_ENABLE_MSI | PCIE_LOCAL_INT_ENABLE;
+	writel_relaxed(val, bridge_base_addr + MC_IMASK_LOCAL);
+
+	val = readl_relaxed(bridge_base_addr + MC_LTSSM_STATE);
+	val |= LTSSM_L0_STATE;
+	writel_relaxed(val, bridge_base_addr + MC_LTSSM_STATE);
+
+	val = ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS | ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS |
+	      ECC_CONTROL_RX_RAM_ECC_BYPASS | ECC_CONTROL_TX_RAM_ECC_BYPASS;
+	writel_relaxed(val, ctrl_base_addr + MC_ECC_CONTROL);
+
+	val = PCIE_EVENT_INT_L2_EXIT_INT | PCIE_EVENT_INT_HOTRST_EXIT_INT |
+	      PCIE_EVENT_INT_DLUP_EXIT_INT | PCIE_EVENT_INT_L2_EXIT_INT_MASK |
+	      PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK | PCIE_EVENT_INT_DLUP_EXIT_INT_MASK;
+	writel_relaxed(val, ctrl_base_addr + MC_PCIE_EVENT_INT);
+
+	val = SEC_ERROR_INT_TX_RAM_SEC_ERR_INT | SEC_ERROR_INT_RX_RAM_SEC_ERR_INT |
+	      SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT | SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT;
+	writel_relaxed(val, ctrl_base_addr + MC_SEC_ERROR_INT);
+	writel_relaxed(val, ctrl_base_addr + MC_SEC_ERROR_INT_MASK);
+
+	val = DED_ERROR_INT_TX_RAM_DED_ERR_INT | DED_ERROR_INT_RX_RAM_DED_ERR_INT |
+	      DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT | DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT;
+	writel_relaxed(val, ctrl_base_addr + MC_DED_ERROR_INT);
+	writel_relaxed(val, ctrl_base_addr + MC_DED_ERROR_INT_MASK);
+
+	writel_relaxed(0, bridge_base_addr + MC_IMASK_LOCAL);
+	writel_relaxed(GENMASK(31, 0), bridge_base_addr + MC_ISTATUS_LOCAL);
+	writel_relaxed(0, bridge_base_addr + MC_IMASK_HOST);
+	writel_relaxed(GENMASK(31, 0), bridge_base_addr + MC_ISTATUS_HOST);
+
+	/* Configure Address Translation Table 0 for PCIe config space */
+	mc_setup_window(bridge_base_addr, 0, cfg->res.start & 0xffffffff, cfg->res.start,
+			resource_size(&cfg->res));
+
+	return mc_setup_windows(pdev, port);
+}
+
+static const struct pci_ecam_ops mc_ecam_ops = {
+	.bus_shift = 20,
+	.init = mc_platform_init,
+	.pci_ops = {
+		.map_bus = pci_ecam_map_bus,
+		.read = pci_generic_config_read,
+		.write = pci_generic_config_write,
+	}
+};
+
+static const struct of_device_id mc_pcie_of_match[] = {
+	{
+		.compatible = "microchip,pcie-host-1.0",
+		.data = &mc_ecam_ops,
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, mc_pcie_of_match)
+
+static struct platform_driver mc_pcie_driver = {
+	.probe = pci_host_common_probe,
+	.driver = {
+		.name = "microchip-pcie",
+		.of_match_table = mc_pcie_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+builtin_platform_driver(mc_pcie_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Microchip PCIe host controller driver");
+MODULE_AUTHOR("Daire McNamara <daire.mcnamara@microchip.com>");