diff mbox series

PCI: add Intel i210 quirk

Message ID 20201230172823.28483-1-michael@walle.cc (mailing list archive)
State Superseded
Headers show
Series PCI: add Intel i210 quirk | expand

Commit Message

Michael Walle Dec. 30, 2020, 5:28 p.m. UTC
The Intel i210 doesn't work if the Expansion ROM BAR overlaps with
another BAR. Networking won't work at all and once a packet is sent the
netdev watchdog will bite:

[   89.059374] ------------[ cut here ]------------
[   89.064019] NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out
[   89.070681] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x3a8/0x3b0
[   89.078989] Modules linked in:
[   89.082053] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W         5.11.0-rc1-00020-gc16f033804b #289
[   89.091574] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
[   89.099870] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[   89.105900] pc : dev_watchdog+0x3a8/0x3b0
[   89.109923] lr : dev_watchdog+0x3a8/0x3b0
[   89.113945] sp : ffff80001000bd50
[   89.117268] x29: ffff80001000bd50 x28: 0000000000000008
[   89.122602] x27: 0000000000000004 x26: 0000000000000140
[   89.127935] x25: ffff002001c6c000 x24: ffff002001c2b940
[   89.133267] x23: ffff8000118c7000 x22: ffff002001c6c39c
[   89.138600] x21: ffff002001c6bfb8 x20: ffff002001c6c3b8
[   89.143932] x19: 0000000000000000 x18: 0000000000000010
[   89.149264] x17: 0000000000000000 x16: 0000000000000000
[   89.154596] x15: ffffffffffffffff x14: 0720072007200720
[   89.159928] x13: 0720072007740775 x12: ffff80001195b980
[   89.165260] x11: 0000000000000003 x10: ffff800011943940
[   89.170592] x9 : ffff800010100d44 x8 : 0000000000017fe8
[   89.175924] x7 : c0000000ffffefff x6 : 0000000000000001
[   89.181255] x5 : 0000000000000000 x4 : 0000000000000000
[   89.186587] x3 : 00000000ffffffff x2 : ffff8000118eb908
[   89.191919] x1 : 84d8200845006900 x0 : 0000000000000000
[   89.197251] Call trace:
[   89.199701]  dev_watchdog+0x3a8/0x3b0
[   89.203374]  call_timer_fn+0x38/0x208
[   89.207049]  run_timer_softirq+0x290/0x540
[   89.211158]  __do_softirq+0x138/0x404
[   89.214831]  irq_exit+0xe8/0xf8
[   89.217981]  __handle_domain_irq+0x70/0xc8
[   89.222091]  gic_handle_irq+0xc8/0x2b0
[   89.225850]  el1_irq+0xb8/0x180
[   89.228999]  arch_cpu_idle+0x18/0x40
[   89.232587]  default_idle_call+0x70/0x214
[   89.236610]  do_idle+0x21c/0x290
[   89.239848]  cpu_startup_entry+0x2c/0x70
[   89.243783]  secondary_start_kernel+0x1a0/0x1f0
[   89.248332] ---[ end trace 1687af62576397bc ]---
[   89.253350] igb 0002:01:00.0 enP2p1s0: Reset adapter

Before this fixup the Expansion ROM BAR will overlap with BAR3:
  # lspci -ns 2:1:0 -xx
  0002:01:00.0 0200: 8086:1533 (rev 03)
  00: 86 80 33 15 06 04 10 00 03 00 00 02 08 00 00 00
  10: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 20 40
  20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 03 00
  30: 00 00 20 40 40 00 00 00 00 00 00 00 22 01 00 00

Add a quirk which will update the Expansion ROM BAR for Intel i210s even
if the ROM is disabled. This was tested on an ARM64 board (kontron
sl28).

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/pci/quirks.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Comments

Paul Menzel Dec. 30, 2020, 6:03 p.m. UTC | #1
Dear Michael,


Thank you for the patch.

Maybe the summary could be more specific:

 > PCI: Fix Intel i210 by avoiding overlapping of BARs

Am 30.12.20 um 18:28 schrieb Michael Walle:
> The Intel i210 doesn't work if the Expansion ROM BAR overlaps with
> another BAR. Networking won't work at all and once a packet is sent the
> netdev watchdog will bite:
> 
> [   89.059374] ------------[ cut here ]------------
> [   89.064019] NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out
> [   89.070681] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:443 dev_watchdog+0x3a8/0x3b0
> [   89.078989] Modules linked in:
> [   89.082053] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G        W         5.11.0-rc1-00020-gc16f033804b #289
> [   89.091574] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT)
> [   89.099870] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
> [   89.105900] pc : dev_watchdog+0x3a8/0x3b0
> [   89.109923] lr : dev_watchdog+0x3a8/0x3b0
> [   89.113945] sp : ffff80001000bd50
> [   89.117268] x29: ffff80001000bd50 x28: 0000000000000008
> [   89.122602] x27: 0000000000000004 x26: 0000000000000140
> [   89.127935] x25: ffff002001c6c000 x24: ffff002001c2b940
> [   89.133267] x23: ffff8000118c7000 x22: ffff002001c6c39c
> [   89.138600] x21: ffff002001c6bfb8 x20: ffff002001c6c3b8
> [   89.143932] x19: 0000000000000000 x18: 0000000000000010
> [   89.149264] x17: 0000000000000000 x16: 0000000000000000
> [   89.154596] x15: ffffffffffffffff x14: 0720072007200720
> [   89.159928] x13: 0720072007740775 x12: ffff80001195b980
> [   89.165260] x11: 0000000000000003 x10: ffff800011943940
> [   89.170592] x9 : ffff800010100d44 x8 : 0000000000017fe8
> [   89.175924] x7 : c0000000ffffefff x6 : 0000000000000001
> [   89.181255] x5 : 0000000000000000 x4 : 0000000000000000
> [   89.186587] x3 : 00000000ffffffff x2 : ffff8000118eb908
> [   89.191919] x1 : 84d8200845006900 x0 : 0000000000000000
> [   89.197251] Call trace:
> [   89.199701]  dev_watchdog+0x3a8/0x3b0
> [   89.203374]  call_timer_fn+0x38/0x208
> [   89.207049]  run_timer_softirq+0x290/0x540
> [   89.211158]  __do_softirq+0x138/0x404
> [   89.214831]  irq_exit+0xe8/0xf8
> [   89.217981]  __handle_domain_irq+0x70/0xc8
> [   89.222091]  gic_handle_irq+0xc8/0x2b0
> [   89.225850]  el1_irq+0xb8/0x180
> [   89.228999]  arch_cpu_idle+0x18/0x40
> [   89.232587]  default_idle_call+0x70/0x214
> [   89.236610]  do_idle+0x21c/0x290
> [   89.239848]  cpu_startup_entry+0x2c/0x70
> [   89.243783]  secondary_start_kernel+0x1a0/0x1f0
> [   89.248332] ---[ end trace 1687af62576397bc ]---
> [   89.253350] igb 0002:01:00.0 enP2p1s0: Reset adapter
> 
> Before this fixup the Expansion ROM BAR will overlap with BAR3:
>    # lspci -ns 2:1:0 -xx
>    0002:01:00.0 0200: 8086:1533 (rev 03)
>    00: 86 80 33 15 06 04 10 00 03 00 00 02 08 00 00 00
>    10: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 20 40
>    20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 03 00
>    30: 00 00 20 40 40 00 00 00 00 00 00 00 22 01 00 00
> 
> Add a quirk which will update the Expansion ROM BAR for Intel i210s even
> if the ROM is disabled. This was tested on an ARM64 board (kontron
> sl28).

As this seems also related to the boot loader, please mention the name 
and version too.

Maybe also add the output with the quirk applied?

> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>   drivers/pci/quirks.c | 34 ++++++++++++++++++++++++++++++++++
>   1 file changed, 34 insertions(+)
> 
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 653660e3ba9e..59c204ef5df7 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -5612,3 +5612,37 @@ static void apex_pci_fixup_class(struct pci_dev *pdev)
>   }
>   DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
>   			       PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
> +
> +/*
> + * Some devices doesn't work if the Expansion ROM has the same base address as

don’t

> + * one of the other BARs although it is disabled.
> + * This might happen if the bootloader/BIOS enumerate the BARs in a different

enumerates?

> + * way than linux. If the Expansion ROM is disabled, linux deliberately skip

skip*s*

> + * writing the ROM BAR if the BAR is not enabled because of some broken
> + * devices, see pci_std_update_resource(). Thus, the ROM BAR of the device will
> + * still contain the value assigned by the booloader, which might be the same
> + * value as one of the other BARs then.
> + *
> + * As a workaround, update the Expansion ROM BAR even if the Expansion ROM is
> + * disabled.
> + */
> +static void pci_fixup_rewrite_rom_bar(struct pci_dev *dev)
> +{
> +	struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
> +	struct pci_bus_region region;
> +	u32 rom_addr;
> +
> +	pci_read_config_dword(dev, dev->rom_base_reg, &rom_addr);
> +
> +	if (rom_addr & PCI_ROM_ADDRESS_ENABLE)
> +		return;
> +
> +	pcibios_resource_to_bus(dev->bus, &region, res);
> +	rom_addr &= ~PCI_ROM_ADDRESS_MASK;
> +	rom_addr |= region.start;
> +	pci_write_config_dword(dev, dev->rom_base_reg, rom_addr);
> +}

Can some debug message be added, that the quirk was run?

> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1533, pci_fixup_rewrite_rom_bar);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1536, pci_fixup_rewrite_rom_bar);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1537, pci_fixup_rewrite_rom_bar);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1538, pci_fixup_rewrite_rom_bar);


Kind regards,

Paul
diff mbox series

Patch

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 653660e3ba9e..59c204ef5df7 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5612,3 +5612,37 @@  static void apex_pci_fixup_class(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
 			       PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
+
+/*
+ * Some devices doesn't work if the Expansion ROM has the same base address as
+ * one of the other BARs although it is disabled.
+ * This might happen if the bootloader/BIOS enumerate the BARs in a different
+ * way than linux. If the Expansion ROM is disabled, linux deliberately skip
+ * writing the ROM BAR if the BAR is not enabled because of some broken
+ * devices, see pci_std_update_resource(). Thus, the ROM BAR of the device will
+ * still contain the value assigned by the booloader, which might be the same
+ * value as one of the other BARs then.
+ *
+ * As a workaround, update the Expansion ROM BAR even if the Expansion ROM is
+ * disabled.
+ */
+static void pci_fixup_rewrite_rom_bar(struct pci_dev *dev)
+{
+	struct resource *res = &dev->resource[PCI_ROM_RESOURCE];
+	struct pci_bus_region region;
+	u32 rom_addr;
+
+	pci_read_config_dword(dev, dev->rom_base_reg, &rom_addr);
+
+	if (rom_addr & PCI_ROM_ADDRESS_ENABLE)
+		return;
+
+	pcibios_resource_to_bus(dev->bus, &region, res);
+	rom_addr &= ~PCI_ROM_ADDRESS_MASK;
+	rom_addr |= region.start;
+	pci_write_config_dword(dev, dev->rom_base_reg, rom_addr);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1533, pci_fixup_rewrite_rom_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1536, pci_fixup_rewrite_rom_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1537, pci_fixup_rewrite_rom_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1538, pci_fixup_rewrite_rom_bar);