diff mbox series

[2/4] PCI: core: quirks: add mrrs_limit_quirk

Message ID 20210619063952.2008746-3-art@khadas.com (mailing list archive)
State Changes Requested
Delegated to: Lorenzo Pieralisi
Headers show
Series PCI: replace dublicated MRRS limit quirks | expand

Commit Message

Artem Lapkin June 19, 2021, 6:39 a.m. UTC
Prepare new MRRS limit quirk which can replace dublicated functionality
for some controllers from Loongson, Keystone, DesignWare

Signed-off-by: Artem Lapkin <art@khadas.com>
---
 drivers/pci/quirks.c | 54 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

Comments

Rob Herring July 1, 2021, 5:07 p.m. UTC | #1
On Sat, Jun 19, 2021 at 12:40 AM Artem Lapkin <email2tema@gmail.com> wrote:
>
> Prepare new MRRS limit quirk which can replace dublicated functionality

typo

> for some controllers from Loongson, Keystone, DesignWare
>
> Signed-off-by: Artem Lapkin <art@khadas.com>
> ---
>  drivers/pci/quirks.c | 54 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 653660e3b..73344ec71 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -5612,3 +5612,57 @@ static void apex_pci_fixup_class(struct pci_dev *pdev)
>  }
>  DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
>                                PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
> +
> +/*
> + * Some Loongson PCIe ports have a h/w limitation of
> + * 256 bytes maximum read request size...
> + *
> + * Keystone PCI controller has a h/w limitation of
> + * 256 bytes maximum read request size.
> + *
> + * Amlogic DesignWare PCI controller on Khadas VIM3/VIM3L have some
> + * issue with HDMI scrambled picture and nvme devices
> + * at intensive writing...
> + */
> +static void mrrs_limit_quirk(struct pci_dev *dev)
> +{
> +       struct pci_bus *bus = dev->bus;
> +       struct pci_dev *bridge;
> +       int mrrs;
> +       int mrrs_limit = 256;
> +       static const struct pci_device_id bridge_devids[] = {
> +               { PCI_VDEVICE(LOONGSON, PCI_DEVICE_ID_LOONGSON_PCIE_PORT_0) },
> +               { PCI_VDEVICE(LOONGSON, PCI_DEVICE_ID_LOONGSON_PCIE_PORT_1) },
> +               { PCI_VDEVICE(LOONGSON, PCI_DEVICE_ID_LOONGSON_PCIE_PORT_2) },
> +               { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_RC_K2HK),
> +                .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },

Seems like checking the class is redundant given the VID and Device ID
seems to be pretty unique.

> +               { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_RC_K2E),
> +                .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
> +               { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_RC_K2L),
> +                .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
> +               { PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_RC_K2G),
> +                .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
> +               { PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3) },

This is Amlogic I guess. But they are reusing the IP default values?
Any other vendor that does the same will get the same quirk applied?
These are write-able,
so perhaps the driver should set them to something Amlogic specific.

> +               { 0, },
> +       };
> +
> +       /* look for the matching bridge */
> +       while (!pci_is_root_bus(bus)) {
> +               bridge = bus->self;
> +               bus = bus->parent;
> +               /*
> +                * 256 bytes maximum read request size. They can't handle
> +                * anything larger than this. So force this limit on
> +                * any devices attached under these ports.
> +                */
> +               if (pci_match_id(bridge_devids, bridge)) {

I would invert this to save some indentation:

if (!pci_match_id(bridge_devids, bridge))
    continue;

> +                       mrrs = pcie_get_readrq(dev);
> +                       if (mrrs > mrrs_limit) {
> +                               pci_info(dev, "limiting MRRS %d to %d\n", mrrs, mrrs_limit);
> +                               pcie_set_readrq(dev, mrrs_limit);
> +                       }
> +                       break;
> +               }
> +       }
> +}
> +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, mrrs_limit_quirk);
> --
> 2.25.1
>
diff mbox series

Patch

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 653660e3b..73344ec71 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5612,3 +5612,57 @@  static void apex_pci_fixup_class(struct pci_dev *pdev)
 }
 DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
 			       PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
+
+/*
+ * Some Loongson PCIe ports have a h/w limitation of
+ * 256 bytes maximum read request size...
+ *
+ * Keystone PCI controller has a h/w limitation of
+ * 256 bytes maximum read request size.
+ *
+ * Amlogic DesignWare PCI controller on Khadas VIM3/VIM3L have some
+ * issue with HDMI scrambled picture and nvme devices
+ * at intensive writing...
+ */
+static void mrrs_limit_quirk(struct pci_dev *dev)
+{
+	struct pci_bus *bus = dev->bus;
+	struct pci_dev *bridge;
+	int mrrs;
+	int mrrs_limit = 256;
+	static const struct pci_device_id bridge_devids[] = {
+		{ PCI_VDEVICE(LOONGSON, PCI_DEVICE_ID_LOONGSON_PCIE_PORT_0) },
+		{ PCI_VDEVICE(LOONGSON, PCI_DEVICE_ID_LOONGSON_PCIE_PORT_1) },
+		{ PCI_VDEVICE(LOONGSON, PCI_DEVICE_ID_LOONGSON_PCIE_PORT_2) },
+		{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_RC_K2HK),
+		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
+		{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_RC_K2E),
+		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
+		{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_RC_K2L),
+		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
+		{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_RC_K2G),
+		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
+		{ PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3) },
+		{ 0, },
+	};
+
+	/* look for the matching bridge */
+	while (!pci_is_root_bus(bus)) {
+		bridge = bus->self;
+		bus = bus->parent;
+		/*
+		 * 256 bytes maximum read request size. They can't handle
+		 * anything larger than this. So force this limit on
+		 * any devices attached under these ports.
+		 */
+		if (pci_match_id(bridge_devids, bridge)) {
+			mrrs = pcie_get_readrq(dev);
+			if (mrrs > mrrs_limit) {
+				pci_info(dev, "limiting MRRS %d to %d\n", mrrs, mrrs_limit);
+				pcie_set_readrq(dev, mrrs_limit);
+			}
+			break;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, mrrs_limit_quirk);