diff mbox series

[5/5] dt-bindings: pci: Convert iProc PCIe to YAML

Message ID 20211202233248.1190797-6-f.fainelli@gmail.com (mailing list archive)
State Superseded
Delegated to: Rob Herring
Headers show
Series Convert iProc PCIe binding to YAML | expand

Commit Message

Florian Fainelli Dec. 2, 2021, 11:32 p.m. UTC
Conver the iProc PCIe controller Device Tree binding to YAML now that
all DTS in arch/arm and arch/arm64 have been fixed to be compliant.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../bindings/pci/brcm,iproc-pcie.txt          | 133 --------------
 .../bindings/pci/brcm,iproc-pcie.yaml         | 172 ++++++++++++++++++
 2 files changed, 172 insertions(+), 133 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml

Comments

Rob Herring (Arm) Dec. 3, 2021, 11:34 p.m. UTC | #1
On Thu, 02 Dec 2021 15:32:48 -0800, Florian Fainelli wrote:
> Conver the iProc PCIe controller Device Tree binding to YAML now that
> all DTS in arch/arm and arch/arm64 have been fixed to be compliant.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  .../bindings/pci/brcm,iproc-pcie.txt          | 133 --------------
>  .../bindings/pci/brcm,iproc-pcie.yaml         | 172 ++++++++++++++++++
>  2 files changed, 172 insertions(+), 133 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
>  create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pci/brcm,iproc-pcie.example.dt.yaml:0:0: /example-0/bus/pcie@18012000/msi: failed to match any schema with compatible: ['brcm,iproc-msi']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1563044

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
deleted file mode 100644
index df065aa53a83..000000000000
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ /dev/null
@@ -1,133 +0,0 @@ 
-* Broadcom iProc PCIe controller with the platform bus interface
-
-Required properties:
-- compatible:
-      "brcm,iproc-pcie" for the first generation of PAXB based controller,
-used in SoCs including NSP, Cygnus, NS2, and Pegasus
-      "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
-controllers, used in Stingray
-      "brcm,iproc-pcie-paxc" for the first generation of PAXC based
-controller, used in NS2
-      "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
-controller, used in Stingray
-  PAXB-based root complex is used for external endpoint devices. PAXC-based
-root complex is connected to emulated endpoint devices internal to the ASIC
-- reg: base address and length of the PCIe controller I/O register space
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map, standard PCI properties to define the
-  mapping of the PCIe interface to interrupt numbers
-- linux,pci-domain: PCI domain ID. Should be unique for each host controller
-- bus-range: PCI bus numbers covered
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions
-
-Optional properties:
-- phys: phandle of the PCIe PHY device
-- phy-names: must be "pcie-phy"
-- dma-coherent: present if DMA operations are coherent
-- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done
-  by the ASIC after power on reset.  In this case, SW is required to configure
-the mapping, based on inbound memory regions specified by this property.
-
-- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done
-by the ASIC after power on reset. In this case, SW needs to configure it
-
-If the brcm,pcie-ob property is present, the following properties become
-effective:
-
-Required:
-- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
-address used by the iProc PCIe core (not the PCIe address)
-
-MSI support (optional):
-
-For older platforms without MSI integrated in the GIC, iProc PCIe core provides
-an event queue based MSI support.  The iProc MSI uses host memories to store
-MSI posted writes in the event queues
-
-On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used
-
-- msi-map: Maps a Requester ID to an MSI controller and associated MSI
-sideband data
-
-- msi-parent: Link to the device node of the MSI controller, used when no MSI
-sideband data is passed between the iProc PCIe controller and the MSI
-controller
-
-Refer to the following binding documents for more detailed description on
-the use of 'msi-map' and 'msi-parent':
-  Documentation/devicetree/bindings/pci/pci-msi.txt
-  Documentation/devicetree/bindings/interrupt-controller/msi.txt
-
-When the iProc event queue based MSI is used, one needs to define the
-following properties in the MSI device node:
-- compatible: Must be "brcm,iproc-msi"
-- msi-controller: claims itself as an MSI controller
-- interrupts: List of interrupt IDs from its parent interrupt device
-
-Optional properties:
-- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
-require the interrupt enable registers to be set explicitly to enable MSI
-
-Example:
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <0>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
-
-		phys = <&phy 0 5>;
-		phy-names = "pcie-phy";
-
-		brcm,pcie-ob;
-		brcm,pcie-ob-axi-offset = <0x00000000>;
-
-		msi-parent = <&msi0>;
-
-		/* iProc event queue based MSI */
-		msi0: msi@18012000 {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
-				     <GIC_SPI 97 IRQ_TYPE_NONE>,
-				     <GIC_SPI 98 IRQ_TYPE_NONE>,
-				     <GIC_SPI 99 IRQ_TYPE_NONE>,
-		};
-	};
-
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <1>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
-
-		phys = <&phy 1 6>;
-		phy-names = "pcie-phy";
-	};
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
new file mode 100644
index 000000000000..f6abad9cb00b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
@@ -0,0 +1,172 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PCIe controller with the platform bus interface
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # for the first generation of PAXB based controller, used in SoCs
+          # including NSP, Cygnus, NS2, and Pegasus
+          - brcm,iproc-pcie
+          # for the second generation of PAXB-based controllers, used in
+          # Stingray
+          - brcm,iproc-pcie-paxb-v2
+          # For the first generation of PAXC based controller, used in NS2
+          - brcm,iproc-pcie-paxc
+          # For the second generation of PAXC based controller, used in Stingray
+          - brcm,iproc-pcie-paxc-v2
+
+  reg:
+    maxItems: 1
+    description: >
+       Base address and length of the PCIe controller I/O register space
+
+  interrupt-map: true
+
+  interrupt-map-mask: true
+
+  "#interrupt-cells":
+    const: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 2
+    description: >
+      Ranges for the PCI memory and I/O regions
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  dma-coherent: true
+
+  "brcm,pcie-ob":
+    type: boolean
+    description: >
+      Some iProc SoCs do not have the outbound address mapping done by the
+      ASIC after power on reset. In this case, SW needs to configure it
+
+  "brcm,pcie-ob-axi-offset":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+       The offset from the AXI address to the internal address used by the
+       iProc PCIe core (not the PCIe address)
+
+  msi-parent: true
+
+  msi-controller: true
+
+  "brcm,pcie-msi-inten":
+    type: boolean
+    description: >
+      Needs to be present for some older iProc platforms that require the
+      interrupt enable registers to be set explicitly to enable MSI
+
+dependencies:
+  "brcm,pcie-ob-axi-offset": ["brcm,pcie-ob"]
+  "brcm,pcie-msi-inten": [msi-controller]
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-pcie
+then:
+  required:
+    - interrupt-controller
+    - interrupt-map
+    - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+           pcie0: pcie@18012000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18012000 0x1000>;
+
+              interrupt-controller;
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <0>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x28000000 0 0x00010000>,
+                   <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+              phys = <&phy 0 5>;
+              phy-names = "pcie-phy";
+
+              brcm,pcie-ob;
+              brcm,pcie-ob-axi-offset = <0x00000000>;
+
+              msi-parent = <&msi0>;
+
+              /* iProc event queue based MSI */
+              msi0: msi {
+                 compatible = "brcm,iproc-msi";
+                 msi-controller;
+                 interrupt-parent = <&gic>;
+                 interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+                         <GIC_SPI 97 IRQ_TYPE_NONE>,
+                         <GIC_SPI 98 IRQ_TYPE_NONE>,
+                         <GIC_SPI 99 IRQ_TYPE_NONE>;
+              };
+           };
+
+           pcie1: pcie@18013000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18013000 0x1000>;
+
+              interrupt-controller;
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <1>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x48000000 0 0x00010000>,
+                   <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+              phys = <&phy 1 6>;
+              phy-names = "pcie-phy";
+           };
+    };