diff mbox series

[v3,1/8] hwtracing: Add trace function support for HiSilicon PCIe Tune and Trace device

Message ID 20220124131118.17887-2-yangyicong@hisilicon.com (mailing list archive)
State Superseded
Delegated to: Bjorn Helgaas
Headers show
Series Add support for HiSilicon PCIe Tune and Trace device | expand

Commit Message

Yicong Yang Jan. 24, 2022, 1:11 p.m. UTC
HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex
integrated Endpoint(RCiEP) device, providing the capability
to dynamically monitor and tune the PCIe traffic, and trace
the TLP headers.

Add the driver for the device to enable the trace function.
This patch adds basic function of trace, including the device's
probe and initialization, functions for trace buffer allocation
and trace enable/disable, register an interrupt handler to
simply response to the DMA events. The user interface of trace
will be added in the following patch.

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
---
 drivers/Makefile                 |   1 +
 drivers/hwtracing/Kconfig        |   2 +
 drivers/hwtracing/ptt/Kconfig    |  11 +
 drivers/hwtracing/ptt/Makefile   |   2 +
 drivers/hwtracing/ptt/hisi_ptt.c | 398 +++++++++++++++++++++++++++++++
 drivers/hwtracing/ptt/hisi_ptt.h | 159 ++++++++++++
 6 files changed, 573 insertions(+)
 create mode 100644 drivers/hwtracing/ptt/Kconfig
 create mode 100644 drivers/hwtracing/ptt/Makefile
 create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c
 create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h

Comments

Jonathan Cameron Feb. 7, 2022, 11:42 a.m. UTC | #1
On Mon, 24 Jan 2022 21:11:11 +0800
Yicong Yang <yangyicong@hisilicon.com> wrote:

> HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex
> integrated Endpoint(RCiEP) device, providing the capability
> to dynamically monitor and tune the PCIe traffic, and trace
> the TLP headers.
> 
> Add the driver for the device to enable the trace function.
> This patch adds basic function of trace, including the device's
> probe and initialization, functions for trace buffer allocation
> and trace enable/disable, register an interrupt handler to
> simply response to the DMA events. The user interface of trace
> will be added in the following patch.
> 
> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Hi Yicong,

I've not been following all the earlier discussion on this driver closely
so I may well raise something that has already been addressed. If so
just ignore the comment.

Thanks,

Jonathan

> ---
>  drivers/Makefile                 |   1 +
>  drivers/hwtracing/Kconfig        |   2 +
>  drivers/hwtracing/ptt/Kconfig    |  11 +
>  drivers/hwtracing/ptt/Makefile   |   2 +
>  drivers/hwtracing/ptt/hisi_ptt.c | 398 +++++++++++++++++++++++++++++++
>  drivers/hwtracing/ptt/hisi_ptt.h | 159 ++++++++++++
>  6 files changed, 573 insertions(+)
>  create mode 100644 drivers/hwtracing/ptt/Kconfig
>  create mode 100644 drivers/hwtracing/ptt/Makefile
>  create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c
>  create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h
> 
> diff --git a/drivers/Makefile b/drivers/Makefile
> index a110338c860c..ab3411e4eba5 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -175,6 +175,7 @@ obj-$(CONFIG_USB4)		+= thunderbolt/
>  obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/
>  obj-y				+= hwtracing/intel_th/
>  obj-$(CONFIG_STM)		+= hwtracing/stm/
> +obj-$(CONFIG_HISI_PTT)		+= hwtracing/ptt/
>  obj-$(CONFIG_ANDROID)		+= android/
>  obj-$(CONFIG_NVMEM)		+= nvmem/
>  obj-$(CONFIG_FPGA)		+= fpga/
> diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
> index 13085835a636..911ee977103c 100644
> --- a/drivers/hwtracing/Kconfig
> +++ b/drivers/hwtracing/Kconfig
> @@ -5,4 +5,6 @@ source "drivers/hwtracing/stm/Kconfig"
>  
>  source "drivers/hwtracing/intel_th/Kconfig"
>  
> +source "drivers/hwtracing/ptt/Kconfig"
> +
>  endmenu
> diff --git a/drivers/hwtracing/ptt/Kconfig b/drivers/hwtracing/ptt/Kconfig
> new file mode 100644
> index 000000000000..4f4f2459ac47
> --- /dev/null
> +++ b/drivers/hwtracing/ptt/Kconfig
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config HISI_PTT
> +	tristate "HiSilicon PCIe Tune and Trace Device"
> +	depends on ARM64 && PCI && HAS_DMA && HAS_IOMEM
> +	help
> +	  HiSilicon PCIe Tune and Trace Device exist as a PCIe RCiEP
> +	  device, provides support for PCIe traffic tuning and
> +	  tracing TLP headers to the memory.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called hisi_ptt.
> diff --git a/drivers/hwtracing/ptt/Makefile b/drivers/hwtracing/ptt/Makefile
> new file mode 100644
> index 000000000000..908c09a98161
> --- /dev/null
> +++ b/drivers/hwtracing/ptt/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_HISI_PTT) += hisi_ptt.o
> diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
> new file mode 100644
> index 000000000000..6d0a0ca5c0a9
> --- /dev/null
> +++ b/drivers/hwtracing/ptt/hisi_ptt.c
> @@ -0,0 +1,398 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for HiSilicon PCIe tune and trace device
> + *
> + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
> + * Author: Yicong Yang <yangyicong@hisilicon.com>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/dma-iommu.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iommu.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/sysfs.h>
> +
> +#include "hisi_ptt.h"
> +
> +static u16 hisi_ptt_get_filter_val(struct pci_dev *pdev)
> +{
> +	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
> +		return BIT(HISI_PCIE_CORE_PORT_ID(PCI_SLOT(pdev->devfn)));
> +
> +	return PCI_DEVID(pdev->bus->number, pdev->devfn);
> +}
> +
> +static int hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt)
> +{
> +	u32 val;
> +
> +	return readl_poll_timeout(hisi_ptt->iobase + HISI_PTT_TRACE_STS, val,
> +				  val & HISI_PTT_TRACE_IDLE,
> +				  HISI_PTT_WAIT_POLL_INTERVAL_US,
> +				  HISI_PTT_WAIT_TIMEOUT_US);
> +}
> +
> +static void hisi_ptt_free_trace_buf(struct hisi_ptt *hisi_ptt)
> +{
> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
> +	struct device *dev = &hisi_ptt->pdev->dev;
> +	struct hisi_ptt_dma_buffer *buffer, *tbuffer;
> +
> +	list_for_each_entry_safe(buffer, tbuffer, &ctrl->trace_buf, list) {
> +		list_del(&buffer->list);
> +		dma_free_coherent(dev, buffer->size, buffer->addr,
> +				  buffer->dma);
> +		kfree(buffer);
> +	}
> +}
> +
> +static int hisi_ptt_alloc_trace_buf(struct hisi_ptt *hisi_ptt)
> +{
> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
> +	struct device *dev = &hisi_ptt->pdev->dev;
> +	struct hisi_ptt_dma_buffer *buffer;
> +	int i, ret;
> +
> +	hisi_ptt->trace_ctrl.buf_index = 0;
> +
> +	/* Make sure the trace buffer is empty before allocating */

This comment is misleading as it suggests it not being empty is
a bad thing but the code handles it as an acceptable path.
Perhaps:
	/*
	 * If the trace buffer has already been allocated, zero the
	 * memory.
	 */

> +	if (!list_empty(&ctrl->trace_buf)) {
> +		list_for_each_entry(buffer, &ctrl->trace_buf, list)
> +			memset(buffer->addr, 0, buffer->size);
> +		return 0;
> +	}
> +
> +	for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) {
> +		buffer = kzalloc(sizeof(*buffer), GFP_KERNEL);
> +		if (!buffer) {
> +			ret = -ENOMEM;
> +			goto err;
> +		}
> +
> +		buffer->addr = dma_alloc_coherent(dev, ctrl->buffer_size,
> +						  &buffer->dma, GFP_KERNEL);
> +		if (!buffer->addr) {
> +			kfree(buffer);
> +			ret = -ENOMEM;
> +			goto err;
> +		}
> +
> +		memset(buffer->addr, 0, buffer->size);
See:
https://lore.kernel.org/lkml/20190108130701.14161-4-hch@lst.de/
dma_alloc_coherent() always zeros the memory for us hence there
is no longer a dma_kzalloc_coherent()

> +
> +		buffer->index = i;

Carrying an index inside a list which corresponds directly
to the position in the list is not particularly nice.
Why can't we compute this index on the fly where the list
is walked?  Or am I misunderstanding and the order of the buffers
is changed in a later patch?

As a side note, is a list actually appropriate when we always
have 4 of these buffers?  Feels like an array of buffer
structures might be cheaper.

> +		buffer->size = ctrl->buffer_size;
> +		list_add_tail(&buffer->list, &ctrl->trace_buf);
> +	}
> +
> +	return 0;
> +err:
> +	hisi_ptt_free_trace_buf(hisi_ptt);
> +	return ret;
> +}
> +
> +static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
> +{
> +	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +	hisi_ptt->trace_ctrl.status = HISI_PTT_TRACE_STATUS_OFF;
> +}
> +
> +static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
> +{
> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
> +	struct hisi_ptt_dma_buffer *cur;
> +	u32 val;
> +
> +	/* Check device idle before start trace */
> +	if (hisi_ptt_wait_trace_hw_idle(hisi_ptt)) {
> +		pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy.\n");
> +		return -EBUSY;
> +	}
> +
> +	/* Reset the DMA before start tracing */
> +	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +	val |= HISI_PTT_TRACE_CTRL_RST;
> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +
> +	/*
> +	 * We'll be in the perf context where preemption is disabled,
> +	 * so use busy loop here.
> +	 */
> +	mdelay(HISI_PTT_RESET_WAIT_MS);

Busy look for 1 second?  Ouch.  If we can reduce this in any way
that would be great or if there is a means to do it before
we disable preemption.

> +
> +	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +	val &= ~HISI_PTT_TRACE_CTRL_RST;
> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +
> +	/* Clear the interrupt status */
> +	writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
> +	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK);
> +
> +	/* Configure the trace DMA buffer */
> +	list_for_each_entry(cur, &ctrl->trace_buf, list) {

I comment on the use of cur->index above.  Here it would be easy to compute
the index as we go for example assuming we never end up with holes
in the list.

> +		writel(lower_32_bits(cur->dma),
> +		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 +
> +		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
> +		writel(upper_32_bits(cur->dma),
> +		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 +
> +		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
> +	}
> +	writel(ctrl->buffer_size, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE);
> +
> +	/* Set the trace control register */
> +	val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type);
> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction);
> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format);
> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter);
> +	if (!hisi_ptt->trace_ctrl.is_port)
> +		val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
> +
> +	/* Start the Trace */
> +	val |= HISI_PTT_TRACE_CTRL_EN;
> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +
> +	ctrl->status = HISI_PTT_TRACE_STATUS_ON;
> +
> +	return 0;
> +}
> +

...

> +
> +static void hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt)
> +{
> +	struct pci_dev *pdev = hisi_ptt->pdev;
> +	struct pci_bus *bus;
> +	u32 reg;
> +
> +	INIT_LIST_HEAD(&hisi_ptt->port_filters);
> +	INIT_LIST_HEAD(&hisi_ptt->req_filters);
> +
> +	/*
> +	 * The device range register provides the information about the
> +	 * root ports which the RCiEP can control and trace. The RCiEP
> +	 * and the root ports it support are on the same PCIe core, with
> +	 * same domain number but maybe different bus number. The device
> +	 * range register will tell us which root ports we can support,
> +	 * Bit[31:16] indicates the upper BDF numbers of the root port,
> +	 * while Bit[15:0] indicates the lower.
> +	 */
> +	reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE);
> +	hisi_ptt->upper = reg >> 16;
> +	hisi_ptt->lower = reg & 0xffff;
Trivial:
Perhaps worthing define HISI_PTT_DEVICE_RANGE_UPPER_MASK etc adn using
FIELD_GET?

> +
> +	reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION);
> +	hisi_ptt->core_id = FIELD_GET(HISI_PTT_CORE_ID, reg);
> +	hisi_ptt->sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg);
> +
> +	bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper));
> +	if (bus)
> +		pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt);
> +
> +	/* Initialize trace controls */
> +	INIT_LIST_HEAD(&hisi_ptt->trace_ctrl.trace_buf);
> +	hisi_ptt->trace_ctrl.buffer_size = HISI_PTT_TRACE_BUF_SIZE;
> +	hisi_ptt->trace_ctrl.default_cpu = cpumask_first(cpumask_of_node(dev_to_node(&pdev->dev)));
> +}
> +


...

> diff --git a/drivers/hwtracing/ptt/hisi_ptt.h b/drivers/hwtracing/ptt/hisi_ptt.h
> new file mode 100644
> index 000000000000..8aa5d6b78cc5
> --- /dev/null
> +++ b/drivers/hwtracing/ptt/hisi_ptt.h
> @@ -0,0 +1,159 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Driver for HiSilicon PCIe tune and trace device
> + *
> + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
> + * Author: Yicong Yang <yangyicong@hisilicon.com>
> + */
> +
> +#ifndef _HISI_PTT_H
> +#define _HISI_PTT_H
> +
> +#include <linux/bits.h>
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/pci.h>
> +#include <linux/types.h>
> +
> +/*
> + * The definition of the device registers and register fields.
> + */
> +#define HISI_PTT_TRACE_ADDR_SIZE	0x0800
> +#define HISI_PTT_TRACE_ADDR_BASE_LO_0	0x0810
> +#define HISI_PTT_TRACE_ADDR_BASE_HI_0	0x0814
> +#define HISI_PTT_TRACE_ADDR_STRIDE	0x8
> +#define HISI_PTT_TRACE_CTRL		0x0850
> +#define   HISI_PTT_TRACE_CTRL_EN	BIT(0)
> +#define   HISI_PTT_TRACE_CTRL_RST	BIT(1)
> +#define   HISI_PTT_TRACE_CTRL_RXTX_SEL	GENMASK(3, 2)
> +#define   HISI_PTT_TRACE_CTRL_TYPE_SEL	GENMASK(7, 4)
> +#define   HISI_PTT_TRACE_CTRL_DATA_FORMAT	BIT(14)
> +#define   HISI_PTT_TRACE_CTRL_FILTER_MODE	BIT(15)
> +#define   HISI_PTT_TRACE_CTRL_TARGET_SEL	GENMASK(31, 16)
> +#define HISI_PTT_TRACE_INT_STAT		0x0890
> +#define   HISI_PTT_TRACE_INT_STAT_MASK	GENMASK(3, 0)
> +#define HISI_PTT_TRACE_INT_MASK		0x0894
> +#define HISI_PTT_TRACE_WR_STS		0x08a0
> +#define   HISI_PTT_TRACE_WR_STS_WRITE	GENMASK(27, 0)
> +#define   HISI_PTT_TRACE_WR_STS_BUFFER	GENMASK(29, 28)
> +#define HISI_PTT_TRACE_STS		0x08b0
> +#define   HISI_PTT_TRACE_IDLE		BIT(0)
> +#define HISI_PTT_DEVICE_RANGE		0x0fe0
> +#define HISI_PTT_LOCATION		0x0fe8
> +#define   HISI_PTT_CORE_ID		GENMASK(15, 0)
> +#define   HISI_PTT_SICL_ID		GENMASK(31, 16)
> +
> +/* Parameters of PTT trace DMA part. */
> +#define HISI_PTT_TRACE_DMA_IRQ			0
> +#define HISI_PTT_TRACE_BUF_CNT			4
> +#define HISI_PTT_TRACE_BUF_SIZE			SZ_4M
> +#define HISI_PTT_TRACE_TOTAL_BUF_SIZE		(HISI_PTT_TRACE_BUF_SIZE * \
> +						 HISI_PTT_TRACE_BUF_CNT)
> +/* Wait time for DMA hardware to reset */
> +#define HISI_PTT_RESET_WAIT_MS		1000UL
> +/* Poll timeout and interval for waiting hardware work to finish */
> +#define HISI_PTT_WAIT_TIMEOUT_US	1000000UL
> +#define HISI_PTT_WAIT_POLL_INTERVAL_US	100UL
> +
> +#define HISI_PCIE_CORE_PORT_ID(devfn)	(PCI_FUNC(devfn) << 1)
> +
> +enum hisi_ptt_trace_status {
> +	HISI_PTT_TRACE_STATUS_OFF = 0,
> +	HISI_PTT_TRACE_STATUS_ON,
> +};

Why not just use a boolean given we only have off and on states?
John Garry Feb. 7, 2022, 6:11 p.m. UTC | #2
On 24/01/2022 13:11, Yicong Yang wrote:
> HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex
> integrated Endpoint(RCiEP) device, providing the capability
> to dynamically monitor and tune the PCIe traffic, and trace
> the TLP headers.
> 
> Add the driver for the device to enable the trace function.
> This patch adds basic function of trace, including the device's
> probe and initialization, functions for trace buffer allocation
> and trace enable/disable, register an interrupt handler to
> simply response to the DMA events. The user interface of trace
> will be added in the following patch.
> 
> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> ---
>   drivers/Makefile                 |   1 +
>   drivers/hwtracing/Kconfig        |   2 +
>   drivers/hwtracing/ptt/Kconfig    |  11 +
>   drivers/hwtracing/ptt/Makefile   |   2 +
>   drivers/hwtracing/ptt/hisi_ptt.c | 398 +++++++++++++++++++++++++++++++
>   drivers/hwtracing/ptt/hisi_ptt.h | 159 ++++++++++++
>   6 files changed, 573 insertions(+)
>   create mode 100644 drivers/hwtracing/ptt/Kconfig
>   create mode 100644 drivers/hwtracing/ptt/Makefile
>   create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c
>   create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h
> 
> diff --git a/drivers/Makefile b/drivers/Makefile
> index a110338c860c..ab3411e4eba5 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -175,6 +175,7 @@ obj-$(CONFIG_USB4)		+= thunderbolt/
>   obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/
>   obj-y				+= hwtracing/intel_th/
>   obj-$(CONFIG_STM)		+= hwtracing/stm/
> +obj-$(CONFIG_HISI_PTT)		+= hwtracing/ptt/
>   obj-$(CONFIG_ANDROID)		+= android/
>   obj-$(CONFIG_NVMEM)		+= nvmem/
>   obj-$(CONFIG_FPGA)		+= fpga/
> diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
> index 13085835a636..911ee977103c 100644
> --- a/drivers/hwtracing/Kconfig
> +++ b/drivers/hwtracing/Kconfig
> @@ -5,4 +5,6 @@ source "drivers/hwtracing/stm/Kconfig"
>   
>   source "drivers/hwtracing/intel_th/Kconfig"
>   
> +source "drivers/hwtracing/ptt/Kconfig"
> +
>   endmenu
> diff --git a/drivers/hwtracing/ptt/Kconfig b/drivers/hwtracing/ptt/Kconfig
> new file mode 100644
> index 000000000000..4f4f2459ac47
> --- /dev/null
> +++ b/drivers/hwtracing/ptt/Kconfig
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +config HISI_PTT
> +	tristate "HiSilicon PCIe Tune and Trace Device"
> +	depends on ARM64 && PCI && HAS_DMA && HAS_IOMEM
> +	help
> +	  HiSilicon PCIe Tune and Trace Device exist as a PCIe RCiEP

exists

> +	  device, provides support for PCIe traffic tuning and

and it provides support...

> +	  tracing TLP headers to the memory.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called hisi_ptt.
> diff --git a/drivers/hwtracing/ptt/Makefile b/drivers/hwtracing/ptt/Makefile
> new file mode 100644
> index 000000000000..908c09a98161
> --- /dev/null
> +++ b/drivers/hwtracing/ptt/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_HISI_PTT) += hisi_ptt.o
> diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
> new file mode 100644
> index 000000000000..6d0a0ca5c0a9
> --- /dev/null
> +++ b/drivers/hwtracing/ptt/hisi_ptt.c
> @@ -0,0 +1,398 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for HiSilicon PCIe tune and trace device
> + *
> + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
> + * Author: Yicong Yang <yangyicong@hisilicon.com>
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/dma-iommu.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iommu.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/sysfs.h>
> +
> +#include "hisi_ptt.h"
> +
> +static u16 hisi_ptt_get_filter_val(struct pci_dev *pdev)
> +{
> +	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
> +		return BIT(HISI_PCIE_CORE_PORT_ID(PCI_SLOT(pdev->devfn)));
> +
> +	return PCI_DEVID(pdev->bus->number, pdev->devfn);
> +}
> +
> +static int hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt)
> +{
> +	u32 val;
> +
> +	return readl_poll_timeout(hisi_ptt->iobase + HISI_PTT_TRACE_STS, val,
> +				  val & HISI_PTT_TRACE_IDLE,
> +				  HISI_PTT_WAIT_POLL_INTERVAL_US,
> +				  HISI_PTT_WAIT_TIMEOUT_US);
> +}
> +
> +static void hisi_ptt_free_trace_buf(struct hisi_ptt *hisi_ptt)
> +{
> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
> +	struct device *dev = &hisi_ptt->pdev->dev;
> +	struct hisi_ptt_dma_buffer *buffer, *tbuffer;
> +
> +	list_for_each_entry_safe(buffer, tbuffer, &ctrl->trace_buf, list) {
> +		list_del(&buffer->list);
> +		dma_free_coherent(dev, buffer->size, buffer->addr,
> +				  buffer->dma);
> +		kfree(buffer);
> +	}
> +}
> +
> +static int hisi_ptt_alloc_trace_buf(struct hisi_ptt *hisi_ptt)
> +{
> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
> +	struct device *dev = &hisi_ptt->pdev->dev;
> +	struct hisi_ptt_dma_buffer *buffer;
> +	int i, ret;
> +
> +	hisi_ptt->trace_ctrl.buf_index = 0;
> +
> +	/* Make sure the trace buffer is empty before allocating */
> +	if (!list_empty(&ctrl->trace_buf)) {
> +		list_for_each_entry(buffer, &ctrl->trace_buf, list)
> +			memset(buffer->addr, 0, buffer->size);
> +		return 0;
> +	}
> +
> +	for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) {
> +		buffer = kzalloc(sizeof(*buffer), GFP_KERNEL);

I may have asked this before: why no devm usage?

> +		if (!buffer) {
> +			ret = -ENOMEM;
> +			goto err;
> +		}
> +
> +		buffer->addr = dma_alloc_coherent(dev, ctrl->buffer_size,
> +						  &buffer->dma, GFP_KERNEL);
> +		if (!buffer->addr) {
> +			kfree(buffer);
> +			ret = -ENOMEM;
> +			goto err;
> +		}
> +
> +		memset(buffer->addr, 0, buffer->size);
> +
> +		buffer->index = i;
> +		buffer->size = ctrl->buffer_size;

please double check if we really need to store this info separately, 
i.e. is it const and same for all?

> +		list_add_tail(&buffer->list, &ctrl->trace_buf);
> +	}
> +
> +	return 0;
> +err:
> +	hisi_ptt_free_trace_buf(hisi_ptt);
> +	return ret;
> +}
> +
> +static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
> +{
> +	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +	hisi_ptt->trace_ctrl.status = HISI_PTT_TRACE_STATUS_OFF;
> +}
> +
> +static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
> +{
> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
> +	struct hisi_ptt_dma_buffer *cur;
> +	u32 val;
> +
> +	/* Check device idle before start trace */
> +	if (hisi_ptt_wait_trace_hw_idle(hisi_ptt)) {
> +		pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy.\n");
> +		return -EBUSY;
> +	}
> +
> +	/* Reset the DMA before start tracing */
> +	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +	val |= HISI_PTT_TRACE_CTRL_RST;
> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +
> +	/*
> +	 * We'll be in the perf context where preemption is disabled,
> +	 * so use busy loop here.

what has preemption is disabled got to do with "busy loop"?

> +	 */
> +	mdelay(HISI_PTT_RESET_WAIT_MS);
> +
> +	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +	val &= ~HISI_PTT_TRACE_CTRL_RST;
> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +
> +	/* Clear the interrupt status */
> +	writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
> +	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK);
> +
> +	/* Configure the trace DMA buffer */
> +	list_for_each_entry(cur, &ctrl->trace_buf, list) {
> +		writel(lower_32_bits(cur->dma),
> +		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 +
> +		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
> +		writel(upper_32_bits(cur->dma),
> +		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 +
> +		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
> +	}
> +	writel(ctrl->buffer_size, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE);
> +
> +	/* Set the trace control register */
> +	val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type);
> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction);
> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format);
> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter);
> +	if (!hisi_ptt->trace_ctrl.is_port)
> +		val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
> +
> +	/* Start the Trace */
> +	val |= HISI_PTT_TRACE_CTRL_EN;
> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
> +
> +	ctrl->status = HISI_PTT_TRACE_STATUS_ON;
> +
> +	return 0;
> +}
> +
> +static irqreturn_t hisi_ptt_isr(int irq, void *context)
> +{
> +	struct hisi_ptt *hisi_ptt = context;
> +	u32 status;
> +
> +	status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
> +
> +	/* Clear the interrupt status of buffer @buf_idx */
> +	writel(status, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t hisi_ptt_irq(int irq, void *context)
> +{
> +	struct hisi_ptt *hisi_ptt = context;
> +	u32 status;
> +
> +	status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
> +	if (!(status & HISI_PTT_TRACE_INT_STAT_MASK))
> +		return IRQ_NONE;
> +
> +	return IRQ_WAKE_THREAD;

Adding empty handler like this is not helpful. And from checking the 
later code, the threaded part does nothing special, i.e nothing time 
consuming, so I don't know why everything cannot be done in the hard 
part for simplicity

> +}
> +
> +static void hisi_ptt_irq_free_vectors(void *pdev)
> +{
> +	pci_free_irq_vectors(pdev);
> +}
> +
> +static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt)
> +{
> +	struct pci_dev *pdev = hisi_ptt->pdev;
> +	int ret;
> +
> +	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
> +	if (ret < 0) {
> +		pci_err(pdev, "failed to allocate irq vector, ret = %d.\n", ret);
> +		return ret;
> +	}
> +
> +	ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_irq_free_vectors, pdev);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = devm_request_threaded_irq(&pdev->dev,
> +					pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ),
> +					hisi_ptt_irq, hisi_ptt_isr, 0,
> +					"hisi-ptt", hisi_ptt);
> +	if (ret) {
> +		pci_err(pdev, "failed to request irq %d, ret = %d.\n",
> +			pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data)
> +{
> +	struct hisi_ptt_filter_desc *filter;
> +	struct hisi_ptt *hisi_ptt = data;
> +	struct list_head *target_list;
> +
> +	target_list = pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ?
> +		      &hisi_ptt->port_filters : &hisi_ptt->req_filters;
> +
> +	filter = kzalloc(sizeof(*filter), GFP_KERNEL);
> +	if (!filter)
> +		return -ENOMEM;
> +
> +	filter->pdev = pdev;
> +	filter->val = hisi_ptt_get_filter_val(pdev);

why do you need to store this also? if you're storing pdev, you seem to 
be able to directly get hisi_ptt_get_filter_val() for it

> +	list_add_tail(&filter->list, target_list);
> +
> +	/* Update the available port mask */
> +	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
> +		hisi_ptt->port_mask |= filter->val;
> +
> +	return 0;
> +}
> +
> +static void hisi_ptt_release_filters(struct hisi_ptt *hisi_ptt)
> +{
> +	struct hisi_ptt_filter_desc *filter, *tfilter;
> +
> +	list_for_each_entry_safe(filter, tfilter, &hisi_ptt->req_filters, list) {
> +		list_del(&filter->list);
> +		kfree(filter);
> +	}
> +
> +	list_for_each_entry_safe(filter, tfilter, &hisi_ptt->port_filters, list) {
> +		list_del(&filter->list);
> +		kfree(filter);
> +	}
> +}
> +
> +static void hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt)
> +{
> +	struct pci_dev *pdev = hisi_ptt->pdev;
> +	struct pci_bus *bus;
> +	u32 reg;
> +
> +	INIT_LIST_HEAD(&hisi_ptt->port_filters);
> +	INIT_LIST_HEAD(&hisi_ptt->req_filters);
> +
> +	/*
> +	 * The device range register provides the information about the
> +	 * root ports which the RCiEP can control and trace. The RCiEP
> +	 * and the root ports it support are on the same PCIe core, with
> +	 * same domain number but maybe different bus number. The device
> +	 * range register will tell us which root ports we can support,
> +	 * Bit[31:16] indicates the upper BDF numbers of the root port,
> +	 * while Bit[15:0] indicates the lower.
> +	 */
> +	reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE);
> +	hisi_ptt->upper = reg >> 16;
> +	hisi_ptt->lower = reg & 0xffff;
> +
> +	reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION);
> +	hisi_ptt->core_id = FIELD_GET(HISI_PTT_CORE_ID, reg);
> +	hisi_ptt->sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg);
> +
> +	bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper));
> +	if (bus)
> +		pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt);
> +
> +	/* Initialize trace controls */
> +	INIT_LIST_HEAD(&hisi_ptt->trace_ctrl.trace_buf);
> +	hisi_ptt->trace_ctrl.buffer_size = HISI_PTT_TRACE_BUF_SIZE;
> +	hisi_ptt->trace_ctrl.default_cpu = cpumask_first(cpumask_of_node(dev_to_node(&pdev->dev)));
> +}
> +
> +/*
> + * The DMA of PTT trace can only use direct mapping, due to some
> + * hardware restriction. Check whether there is an iommu or the
> + * policy of the iommu domain is passthrough, otherwise the trace
> + * cannot work.
> + */
> +static int hisi_ptt_check_iommu_mapping(struct hisi_ptt *hisi_ptt)
> +{
> +	struct pci_dev *pdev = hisi_ptt->pdev;
> +	struct iommu_domain *iommu_domain;
> +
> +	iommu_domain = iommu_get_domain_for_dev(&pdev->dev);
> +	if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY)
> +		return 0;

so what stops us changing the domain type later?

> +
> +	return -EOPNOTSUPP;
> +}
> +
> +static int hisi_ptt_probe(struct pci_dev *pdev,
> +			  const struct pci_device_id *id)
> +{
> +	struct hisi_ptt *hisi_ptt;
> +	int ret;
> +
> +	hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL);
> +	if (!hisi_ptt)
> +		return -ENOMEM;
> +
> +	mutex_init(&hisi_ptt->mutex);
> +	hisi_ptt->pdev = pdev;
> +
> +	/*
> +	 * Lifetime of pci_dev is longer than hisi_ptt,
> +	 * so directly reference to the pci name string.
> +	 */
> +	hisi_ptt->name = pci_name(hisi_ptt->pdev);
> +	pci_set_drvdata(pdev, hisi_ptt);
> +
> +	ret = pcim_enable_device(pdev);
> +	if (ret) {
> +		pci_err(pdev, "failed to enable device, ret = %d.\n", ret);
> +		return ret;
> +	}
> +
> +	ret = pcim_iomap_regions(pdev, BIT(2), hisi_ptt->name);
> +	if (ret) {
> +		pci_err(pdev, "failed to remap io memory, ret = %d.\n", ret);
> +		return ret;
> +	}
> +
> +	hisi_ptt->iobase = pcim_iomap_table(pdev)[2];
> +
> +	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
> +	if (ret) {
> +		pci_err(pdev, "failed to set 64 bit dma mask, ret = %d.\n", ret);
> +		return ret;
> +	}
> +	pci_set_master(pdev);
> +
> +	ret = hisi_ptt_register_irq(hisi_ptt);
> +	if (ret)
> +		return ret;
> +
> +	hisi_ptt_init_ctrls(hisi_ptt);
> +
> +	ret = hisi_ptt_check_iommu_mapping(hisi_ptt);

surely this should be done earlier in the probe

> +	if (ret) {
> +		pci_err(pdev, "cannot work with non-direct DMA mapping.\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +void hisi_ptt_remove(struct pci_dev *pdev)
> +{
> +	struct hisi_ptt *hisi_ptt = pci_get_drvdata(pdev);
> +
> +	if (hisi_ptt->trace_ctrl.status == HISI_PTT_TRACE_STATUS_ON)
> +		hisi_ptt_trace_end(hisi_ptt);
> +
> +	hisi_ptt_free_trace_buf(hisi_ptt);
> +	hisi_ptt_release_filters(hisi_ptt);
> +}
> +
> +static const struct pci_device_id hisi_ptt_id_tbl[] = {
> +	{ PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa12e) },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(pci, hisi_ptt_id_tbl);
> +
> +static struct pci_driver hisi_ptt_driver = {
> +	.name = "hisi_ptt",
> +	.id_table = hisi_ptt_id_tbl,
> +	.probe = hisi_ptt_probe,
> +	.remove = hisi_ptt_remove,
> +};
> +module_pci_driver(hisi_ptt_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>");
> +MODULE_DESCRIPTION("Driver for HiSilicon PCIe tune and trace device");
> diff --git a/drivers/hwtracing/ptt/hisi_ptt.h b/drivers/hwtracing/ptt/hisi_ptt.h
> new file mode 100644
> index 000000000000..8aa5d6b78cc5
> --- /dev/null
> +++ b/drivers/hwtracing/ptt/hisi_ptt.h
> @@ -0,0 +1,159 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Driver for HiSilicon PCIe tune and trace device
> + *
> + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
> + * Author: Yicong Yang <yangyicong@hisilicon.com>

I saw "spinoff the declarations to a separate header" in the revision 
notes. I don't understand the reasoning for that - if the declarations 
are only used in the .c file then they can be declared there. They are 
not an interface nor shared declarations.

Anyway it's the maintainers choice.

> + */
> +
> +#ifndef _HISI_PTT_H
> +#define _HISI_PTT_H
> +
> +#include <linux/bits.h>
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/pci.h>
> +#include <linux/types.h>
> +
> +/*
> + * The definition of the device registers and register fields.
> + */
> +#define HISI_PTT_TRACE_ADDR_SIZE	0x0800
> +#define HISI_PTT_TRACE_ADDR_BASE_LO_0	0x0810
> +#define HISI_PTT_TRACE_ADDR_BASE_HI_0	0x0814
> +#define HISI_PTT_TRACE_ADDR_STRIDE	0x8
> +#define HISI_PTT_TRACE_CTRL		0x0850
> +#define   HISI_PTT_TRACE_CTRL_EN	BIT(0)
> +#define   HISI_PTT_TRACE_CTRL_RST	BIT(1)
> +#define   HISI_PTT_TRACE_CTRL_RXTX_SEL	GENMASK(3, 2)
> +#define   HISI_PTT_TRACE_CTRL_TYPE_SEL	GENMASK(7, 4)
> +#define   HISI_PTT_TRACE_CTRL_DATA_FORMAT	BIT(14)
> +#define   HISI_PTT_TRACE_CTRL_FILTER_MODE	BIT(15)
> +#define   HISI_PTT_TRACE_CTRL_TARGET_SEL	GENMASK(31, 16)
> +#define HISI_PTT_TRACE_INT_STAT		0x0890
> +#define   HISI_PTT_TRACE_INT_STAT_MASK	GENMASK(3, 0)
> +#define HISI_PTT_TRACE_INT_MASK		0x0894
> +#define HISI_PTT_TRACE_WR_STS		0x08a0
> +#define   HISI_PTT_TRACE_WR_STS_WRITE	GENMASK(27, 0)
> +#define   HISI_PTT_TRACE_WR_STS_BUFFER	GENMASK(29, 28)
> +#define HISI_PTT_TRACE_STS		0x08b0
> +#define   HISI_PTT_TRACE_IDLE		BIT(0)
> +#define HISI_PTT_DEVICE_RANGE		0x0fe0
> +#define HISI_PTT_LOCATION		0x0fe8
> +#define   HISI_PTT_CORE_ID		GENMASK(15, 0)
> +#define   HISI_PTT_SICL_ID		GENMASK(31, 16)
> +
> +/* Parameters of PTT trace DMA part. */
> +#define HISI_PTT_TRACE_DMA_IRQ			0
> +#define HISI_PTT_TRACE_BUF_CNT			4
> +#define HISI_PTT_TRACE_BUF_SIZE			SZ_4M
> +#define HISI_PTT_TRACE_TOTAL_BUF_SIZE		(HISI_PTT_TRACE_BUF_SIZE * \
> +						 HISI_PTT_TRACE_BUF_CNT)
> +/* Wait time for DMA hardware to reset */
> +#define HISI_PTT_RESET_WAIT_MS		1000UL
> +/* Poll timeout and interval for waiting hardware work to finish */
> +#define HISI_PTT_WAIT_TIMEOUT_US	1000000UL
> +#define HISI_PTT_WAIT_POLL_INTERVAL_US	100UL
> +
> +#define HISI_PCIE_CORE_PORT_ID(devfn)	(PCI_FUNC(devfn) << 1)
> +
> +enum hisi_ptt_trace_status {
> +	HISI_PTT_TRACE_STATUS_OFF = 0,
> +	HISI_PTT_TRACE_STATUS_ON,
> +};
> +
> +/**
> + * struct hisi_ptt_dma_buffer - describe a single trace buffer of PTT trace.
> + *                              The detail of the data format is described
> + *                              in the documentation of PTT device.
> + * @list:  entry of this buffer in the buffer list
> + * @size:  size of this buffer
> + * @dma:   DMA address of this buffer visible to the device
> + * @addr:  virtual address of this buffer visible to the cpu
> + * @index: index of this buffer in the buffer list
> + */
> +struct hisi_ptt_dma_buffer {
> +	struct list_head list;
> +	unsigned int size;
> +	dma_addr_t dma;
> +	void *addr;
> +	int index;
> +};
> +
> +/**
> + * struct hisi_ptt_trace_ctrl - control and status of PTT trace
> + * @status:      current trace status
> + * @trace_buf:   the trace buffers for holding the trace data
> + * @default_cpu: default cpu to start the trace session
> + * @buffer_size: the size of each trace buffer in the list
> + * @buf_index:   the index of current using trace buffer
> + * @is_port:     whether we're tracing root port or not
> + * @direction:   direction of the TLP headers to trace
> + * @filter:      filter value for tracing the TLP headers
> + * @format:      format of the TLP headers to trace
> + * @type:        type of the TLP headers to trace
> + */
> +struct hisi_ptt_trace_ctrl {
> +	enum hisi_ptt_trace_status status;
> +	struct list_head trace_buf;
> +	int default_cpu;
> +	u32 buffer_size;
> +	u32 buf_index;
> +	bool is_port;
> +	u32 direction:2;
> +	u32 filter:16;
> +	u32 format:1;
> +	u32 type:4;
> +};
> +
> +/**
> + * struct hisi_ptt_filter_desc - descriptor of the PTT trace filter
> + * @list: entry of this descriptor in the filter list
> + * @pdev: pci_dev related to this filter
> + * @val:  filter value for the device
> + */
> +struct hisi_ptt_filter_desc {
> +	struct list_head list;
> +	struct pci_dev *pdev;
> +	u16 val;
> +};
> +
> +/**
> + * struct hisi_ptt - per PTT device data
> + * @trace_ctrl:   the control information of PTT trace
> + * @iobase:       base IO address of the device
> + * @pdev:         pci_dev of this PTT device
> + * @mutex:        mutex to protect the filter list and serialize the perf process.
> + * @name:         name of the PTT device
> + * @core_id:      PCIe core ID this PTT device locates

please don't put stuff in the common control struct which can be worked 
out on the fly. This is set in one function and then read in a callee.

> + * @sicl_id:      SICL ID this PTT device locates
> + * @upper:        the upper BDF range of the PCI devices managed by this PTT device
> + * @lower:        the lower BDF range of the PCI devices managed by this PTT device
> + * @port_filters: the filter list of root ports
> + * @req_filters:  the filter list of requester ID
> + * @port_mask:    port mask of the managed root ports
> + */
> +struct hisi_ptt {
> +	struct hisi_ptt_trace_ctrl trace_ctrl;
> +	void __iomem *iobase;
> +	struct pci_dev *pdev;
> +	struct mutex mutex;
> +	const char *name;
> +	u16 core_id;
> +	u16 sicl_id;
> +	u32 upper;
> +	u32 lower;
> +
> +	/*
> +	 * The trace TLP headers can either be filtered by certain
> +	 * root port, or by the requester ID. Organize the filters
> +	 * by @port_filters and @req_filters here. The mask of all
> +	 * the valid ports is also cached for doing sanity check
> +	 * of user input.
> +	 */
> +	struct list_head port_filters;
> +	struct list_head req_filters;
> +	u16 port_mask;
> +};
> +
> +#endif /* _HISI_PTT_H */
Yicong Yang Feb. 8, 2022, 8:57 a.m. UTC | #3
Hi John,

Thanks for the comments. some replies inline.

On 2022/2/8 2:11, John Garry wrote:
> On 24/01/2022 13:11, Yicong Yang wrote:
>> HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex
>> integrated Endpoint(RCiEP) device, providing the capability
>> to dynamically monitor and tune the PCIe traffic, and trace
>> the TLP headers.
>>
>> Add the driver for the device to enable the trace function.
>> This patch adds basic function of trace, including the device's
>> probe and initialization, functions for trace buffer allocation
>> and trace enable/disable, register an interrupt handler to
>> simply response to the DMA events. The user interface of trace
>> will be added in the following patch.
>>
>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
>> ---
>>   drivers/Makefile                 |   1 +
>>   drivers/hwtracing/Kconfig        |   2 +
>>   drivers/hwtracing/ptt/Kconfig    |  11 +
>>   drivers/hwtracing/ptt/Makefile   |   2 +
>>   drivers/hwtracing/ptt/hisi_ptt.c | 398 +++++++++++++++++++++++++++++++
>>   drivers/hwtracing/ptt/hisi_ptt.h | 159 ++++++++++++
>>   6 files changed, 573 insertions(+)
>>   create mode 100644 drivers/hwtracing/ptt/Kconfig
>>   create mode 100644 drivers/hwtracing/ptt/Makefile
>>   create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c
>>   create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h
>>
>> diff --git a/drivers/Makefile b/drivers/Makefile
>> index a110338c860c..ab3411e4eba5 100644
>> --- a/drivers/Makefile
>> +++ b/drivers/Makefile
>> @@ -175,6 +175,7 @@ obj-$(CONFIG_USB4)        += thunderbolt/
>>   obj-$(CONFIG_CORESIGHT)        += hwtracing/coresight/
>>   obj-y                += hwtracing/intel_th/
>>   obj-$(CONFIG_STM)        += hwtracing/stm/
>> +obj-$(CONFIG_HISI_PTT)        += hwtracing/ptt/
>>   obj-$(CONFIG_ANDROID)        += android/
>>   obj-$(CONFIG_NVMEM)        += nvmem/
>>   obj-$(CONFIG_FPGA)        += fpga/
>> diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
>> index 13085835a636..911ee977103c 100644
>> --- a/drivers/hwtracing/Kconfig
>> +++ b/drivers/hwtracing/Kconfig
>> @@ -5,4 +5,6 @@ source "drivers/hwtracing/stm/Kconfig"
>>     source "drivers/hwtracing/intel_th/Kconfig"
>>   +source "drivers/hwtracing/ptt/Kconfig"
>> +
>>   endmenu
>> diff --git a/drivers/hwtracing/ptt/Kconfig b/drivers/hwtracing/ptt/Kconfig
>> new file mode 100644
>> index 000000000000..4f4f2459ac47
>> --- /dev/null
>> +++ b/drivers/hwtracing/ptt/Kconfig
>> @@ -0,0 +1,11 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +config HISI_PTT
>> +    tristate "HiSilicon PCIe Tune and Trace Device"
>> +    depends on ARM64 && PCI && HAS_DMA && HAS_IOMEM
>> +    help
>> +      HiSilicon PCIe Tune and Trace Device exist as a PCIe RCiEP
> 
> exists
> 
>> +      device, provides support for PCIe traffic tuning and
> 
> and it provides support...
> 

will fix, thanks.

>> +      tracing TLP headers to the memory.
>> +
>> +      This driver can also be built as a module. If so, the module
>> +      will be called hisi_ptt.
>> diff --git a/drivers/hwtracing/ptt/Makefile b/drivers/hwtracing/ptt/Makefile
>> new file mode 100644
>> index 000000000000..908c09a98161
>> --- /dev/null
>> +++ b/drivers/hwtracing/ptt/Makefile
>> @@ -0,0 +1,2 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +obj-$(CONFIG_HISI_PTT) += hisi_ptt.o
>> diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
>> new file mode 100644
>> index 000000000000..6d0a0ca5c0a9
>> --- /dev/null
>> +++ b/drivers/hwtracing/ptt/hisi_ptt.c
>> @@ -0,0 +1,398 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Driver for HiSilicon PCIe tune and trace device
>> + *
>> + * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
>> + * Author: Yicong Yang <yangyicong@hisilicon.com>
>> + */
>> +
[...]
>> +static int hisi_ptt_alloc_trace_buf(struct hisi_ptt *hisi_ptt)
>> +{
>> +    struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>> +    struct device *dev = &hisi_ptt->pdev->dev;
>> +    struct hisi_ptt_dma_buffer *buffer;
>> +    int i, ret;
>> +
>> +    hisi_ptt->trace_ctrl.buf_index = 0;
>> +
>> +    /* Make sure the trace buffer is empty before allocating */
>> +    if (!list_empty(&ctrl->trace_buf)) {
>> +        list_for_each_entry(buffer, &ctrl->trace_buf, list)
>> +            memset(buffer->addr, 0, buffer->size);
>> +        return 0;
>> +    }
>> +
>> +    for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) {
>> +        buffer = kzalloc(sizeof(*buffer), GFP_KERNEL);
> 
> I may have asked this before: why no devm usage?
> 

I remembered I was suggested for not using devm where we may need to manually
free it as it intends to be freed automically after the driver detachment.

>> +        if (!buffer) {
>> +            ret = -ENOMEM;
>> +            goto err;
>> +        }
>> +
>> +        buffer->addr = dma_alloc_coherent(dev, ctrl->buffer_size,
>> +                          &buffer->dma, GFP_KERNEL);
>> +        if (!buffer->addr) {
>> +            kfree(buffer);
>> +            ret = -ENOMEM;
>> +            goto err;
>> +        }
>> +
>> +        memset(buffer->addr, 0, buffer->size);
>> +
>> +        buffer->index = i;
>> +        buffer->size = ctrl->buffer_size;
> 
> please double check if we really need to store this info separately, i.e. is it const and same for all?
> 

yes. I stored it for convenience but seems unnecessary now, I'll remove it.

>> +        list_add_tail(&buffer->list, &ctrl->trace_buf);
>> +    }
>> +
>> +    return 0;
>> +err:
>> +    hisi_ptt_free_trace_buf(hisi_ptt);
>> +    return ret;
>> +}
>> +
>> +static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
>> +{
>> +    writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +    hisi_ptt->trace_ctrl.status = HISI_PTT_TRACE_STATUS_OFF;
>> +}
>> +
>> +static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
>> +{
>> +    struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>> +    struct hisi_ptt_dma_buffer *cur;
>> +    u32 val;
>> +
>> +    /* Check device idle before start trace */
>> +    if (hisi_ptt_wait_trace_hw_idle(hisi_ptt)) {
>> +        pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy.\n");
>> +        return -EBUSY;
>> +    }
>> +
>> +    /* Reset the DMA before start tracing */
>> +    val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +    val |= HISI_PTT_TRACE_CTRL_RST;
>> +    writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +
>> +    /*
>> +     * We'll be in the perf context where preemption is disabled,
>> +     * so use busy loop here.
> 
> what has preemption is disabled got to do with "busy loop"?
> 

The comment here to notice why we don't use a msleep() or similiar here as
we're in atomic context. Before we change to use perf, it's msleep() here.

>> +     */
>> +    mdelay(HISI_PTT_RESET_WAIT_MS);
>> +
>> +    val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +    val &= ~HISI_PTT_TRACE_CTRL_RST;
>> +    writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +
>> +    /* Clear the interrupt status */
>> +    writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>> +    writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK);
>> +
>> +    /* Configure the trace DMA buffer */
>> +    list_for_each_entry(cur, &ctrl->trace_buf, list) {
>> +        writel(lower_32_bits(cur->dma),
>> +               hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 +
>> +               cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
>> +        writel(upper_32_bits(cur->dma),
>> +               hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 +
>> +               cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
>> +    }
>> +    writel(ctrl->buffer_size, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE);
>> +
>> +    /* Set the trace control register */
>> +    val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type);
>> +    val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction);
>> +    val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format);
>> +    val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter);
>> +    if (!hisi_ptt->trace_ctrl.is_port)
>> +        val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
>> +
>> +    /* Start the Trace */
>> +    val |= HISI_PTT_TRACE_CTRL_EN;
>> +    writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +
>> +    ctrl->status = HISI_PTT_TRACE_STATUS_ON;
>> +
>> +    return 0;
>> +}
>> +
>> +static irqreturn_t hisi_ptt_isr(int irq, void *context)
>> +{
>> +    struct hisi_ptt *hisi_ptt = context;
>> +    u32 status;
>> +
>> +    status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>> +
>> +    /* Clear the interrupt status of buffer @buf_idx */
>> +    writel(status, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>> +
>> +    return IRQ_HANDLED;
>> +}
>> +
>> +static irqreturn_t hisi_ptt_irq(int irq, void *context)
>> +{
>> +    struct hisi_ptt *hisi_ptt = context;
>> +    u32 status;
>> +
>> +    status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>> +    if (!(status & HISI_PTT_TRACE_INT_STAT_MASK))
>> +        return IRQ_NONE;
>> +
>> +    return IRQ_WAKE_THREAD;
> 
> Adding empty handler like this is not helpful. And from checking the later code, the threaded part does nothing special, i.e nothing time consuming, so I don't know why everything cannot be done in the hard part for simplicity
> 

In the following patch we're copying and committing data to the AUX buffer so we need a threaded part here. For this
patch just adding the stub here. Maybe I can add some comments to mention it ?

>> +}
>> +
>> +static void hisi_ptt_irq_free_vectors(void *pdev)
>> +{
>> +    pci_free_irq_vectors(pdev);
>> +}
>> +
>> +static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt)
>> +{
>> +    struct pci_dev *pdev = hisi_ptt->pdev;
>> +    int ret;
>> +
>> +    ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
>> +    if (ret < 0) {
>> +        pci_err(pdev, "failed to allocate irq vector, ret = %d.\n", ret);
>> +        return ret;
>> +    }
>> +
>> +    ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_irq_free_vectors, pdev);
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    ret = devm_request_threaded_irq(&pdev->dev,
>> +                    pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ),
>> +                    hisi_ptt_irq, hisi_ptt_isr, 0,
>> +                    "hisi-ptt", hisi_ptt);
>> +    if (ret) {
>> +        pci_err(pdev, "failed to request irq %d, ret = %d.\n",
>> +            pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), ret);
>> +        return ret;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data)
>> +{
>> +    struct hisi_ptt_filter_desc *filter;
>> +    struct hisi_ptt *hisi_ptt = data;
>> +    struct list_head *target_list;
>> +
>> +    target_list = pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ?
>> +              &hisi_ptt->port_filters : &hisi_ptt->req_filters;
>> +
>> +    filter = kzalloc(sizeof(*filter), GFP_KERNEL);
>> +    if (!filter)
>> +        return -ENOMEM;
>> +
>> +    filter->pdev = pdev;
>> +    filter->val = hisi_ptt_get_filter_val(pdev);
> 
> why do you need to store this also? if you're storing pdev, you seem to be able to directly get hisi_ptt_get_filter_val() for it
> 

checked the used places and I think it canbe dropped. thanks.

>> +    list_add_tail(&filter->list, target_list);
>> +
>> +    /* Update the available port mask */
>> +    if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
>> +        hisi_ptt->port_mask |= filter->val;
>> +
>> +    return 0;
>> +}
>> +
[...]
>> +/*
>> + * The DMA of PTT trace can only use direct mapping, due to some
>> + * hardware restriction. Check whether there is an iommu or the
>> + * policy of the iommu domain is passthrough, otherwise the trace
>> + * cannot work.
>> + */
>> +static int hisi_ptt_check_iommu_mapping(struct hisi_ptt *hisi_ptt)
>> +{
>> +    struct pci_dev *pdev = hisi_ptt->pdev;
>> +    struct iommu_domain *iommu_domain;
>> +
>> +    iommu_domain = iommu_get_domain_for_dev(&pdev->dev);
>> +    if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY)
>> +        return 0;
> 
> so what stops us changing the domain type later?
> 

sorry but I don't think I got the point.

>> +
>> +    return -EOPNOTSUPP;
>> +}
>> +
>> +static int hisi_ptt_probe(struct pci_dev *pdev,
>> +              const struct pci_device_id *id)
>> +{
>> +    struct hisi_ptt *hisi_ptt;
>> +    int ret;
>> +
>> +    hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL);
>> +    if (!hisi_ptt)
>> +        return -ENOMEM;
>> +
>> +    mutex_init(&hisi_ptt->mutex);
>> +    hisi_ptt->pdev = pdev;
>> +
>> +    /*
>> +     * Lifetime of pci_dev is longer than hisi_ptt,
>> +     * so directly reference to the pci name string.
>> +     */
>> +    hisi_ptt->name = pci_name(hisi_ptt->pdev);
>> +    pci_set_drvdata(pdev, hisi_ptt);
>> +
>> +    ret = pcim_enable_device(pdev);
>> +    if (ret) {
>> +        pci_err(pdev, "failed to enable device, ret = %d.\n", ret);
>> +        return ret;
>> +    }
>> +
>> +    ret = pcim_iomap_regions(pdev, BIT(2), hisi_ptt->name);
>> +    if (ret) {
>> +        pci_err(pdev, "failed to remap io memory, ret = %d.\n", ret);
>> +        return ret;
>> +    }
>> +
>> +    hisi_ptt->iobase = pcim_iomap_table(pdev)[2];
>> +
>> +    ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
>> +    if (ret) {
>> +        pci_err(pdev, "failed to set 64 bit dma mask, ret = %d.\n", ret);
>> +        return ret;
>> +    }
>> +    pci_set_master(pdev);
>> +
>> +    ret = hisi_ptt_register_irq(hisi_ptt);
>> +    if (ret)
>> +        return ret;
>> +
>> +    hisi_ptt_init_ctrls(hisi_ptt);
>> +
>> +    ret = hisi_ptt_check_iommu_mapping(hisi_ptt);
> 
> surely this should be done earlier in the probe
> 

yes it's a good point. will make it earlier.

>> +    if (ret) {
>> +        pci_err(pdev, "cannot work with non-direct DMA mapping.\n");
>> +        return ret;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
[...]
>> +/**
>> + * struct hisi_ptt - per PTT device data
>> + * @trace_ctrl:   the control information of PTT trace
>> + * @iobase:       base IO address of the device
>> + * @pdev:         pci_dev of this PTT device
>> + * @mutex:        mutex to protect the filter list and serialize the perf process.
>> + * @name:         name of the PTT device
>> + * @core_id:      PCIe core ID this PTT device locates
> 
> please don't put stuff in the common control struct which can be worked out on the fly. This is set in one function and then read in a callee.
> 

ok. will remove this.

Thanks,
Yicong

>> + * @sicl_id:      SICL ID this PTT device locates
>> + * @upper:        the upper BDF range of the PCI devices managed by this PTT device
>> + * @lower:        the lower BDF range of the PCI devices managed by this PTT device
>> + * @port_filters: the filter list of root ports
>> + * @req_filters:  the filter list of requester ID
>> + * @port_mask:    port mask of the managed root ports
>> + */
>> +struct hisi_ptt {
>> +    struct hisi_ptt_trace_ctrl trace_ctrl;
>> +    void __iomem *iobase;
>> +    struct pci_dev *pdev;
>> +    struct mutex mutex;
>> +    const char *name;
>> +    u16 core_id;
>> +    u16 sicl_id;
>> +    u32 upper;
>> +    u32 lower;
>> +
>> +    /*
>> +     * The trace TLP headers can either be filtered by certain
>> +     * root port, or by the requester ID. Organize the filters
>> +     * by @port_filters and @req_filters here. The mask of all
>> +     * the valid ports is also cached for doing sanity check
>> +     * of user input.
>> +     */
>> +    struct list_head port_filters;
>> +    struct list_head req_filters;
>> +    u16 port_mask;
>> +};
>> +
>> +#endif /* _HISI_PTT_H */
> 
> .
Yicong Yang Feb. 8, 2022, 11:07 a.m. UTC | #4
On 2022/2/7 19:42, Jonathan Cameron wrote:
> On Mon, 24 Jan 2022 21:11:11 +0800
> Yicong Yang <yangyicong@hisilicon.com> wrote:
> 
>> HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex
>> integrated Endpoint(RCiEP) device, providing the capability
>> to dynamically monitor and tune the PCIe traffic, and trace
>> the TLP headers.
>>
>> Add the driver for the device to enable the trace function.
>> This patch adds basic function of trace, including the device's
>> probe and initialization, functions for trace buffer allocation
>> and trace enable/disable, register an interrupt handler to
>> simply response to the DMA events. The user interface of trace
>> will be added in the following patch.
>>
>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> Hi Yicong,
> 
> I've not been following all the earlier discussion on this driver closely
> so I may well raise something that has already been addressed. If so
> just ignore the comment.

Thanks for the comments. It's ok for me to clarify it :).
Part replies inline and I need to do some test on the others.

> 
> Thanks,
> 
> Jonathan
> 
>> ---
>>  drivers/Makefile                 |   1 +
>>  drivers/hwtracing/Kconfig        |   2 +
>>  drivers/hwtracing/ptt/Kconfig    |  11 +
>>  drivers/hwtracing/ptt/Makefile   |   2 +
>>  drivers/hwtracing/ptt/hisi_ptt.c | 398 +++++++++++++++++++++++++++++++
>>  drivers/hwtracing/ptt/hisi_ptt.h | 159 ++++++++++++
>>  6 files changed, 573 insertions(+)
>>  create mode 100644 drivers/hwtracing/ptt/Kconfig
>>  create mode 100644 drivers/hwtracing/ptt/Makefile
>>  create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c
>>  create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h
>>
[...]
>> +
>> +static int hisi_ptt_alloc_trace_buf(struct hisi_ptt *hisi_ptt)
>> +{
>> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>> +	struct device *dev = &hisi_ptt->pdev->dev;
>> +	struct hisi_ptt_dma_buffer *buffer;
>> +	int i, ret;
>> +
>> +	hisi_ptt->trace_ctrl.buf_index = 0;
>> +
>> +	/* Make sure the trace buffer is empty before allocating */
> 
> This comment is misleading as it suggests it not being empty is
> a bad thing but the code handles it as an acceptable path.
> Perhaps:
> 	/*
> 	 * If the trace buffer has already been allocated, zero the
> 	 * memory.
> 	 */
> 

will make it less misleading. thanks.

>> +	if (!list_empty(&ctrl->trace_buf)) {
>> +		list_for_each_entry(buffer, &ctrl->trace_buf, list)
>> +			memset(buffer->addr, 0, buffer->size);
>> +		return 0;
>> +	}
>> +
>> +	for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) {
>> +		buffer = kzalloc(sizeof(*buffer), GFP_KERNEL);
>> +		if (!buffer) {
>> +			ret = -ENOMEM;
>> +			goto err;
>> +		}
>> +
>> +		buffer->addr = dma_alloc_coherent(dev, ctrl->buffer_size,
>> +						  &buffer->dma, GFP_KERNEL);
>> +		if (!buffer->addr) {
>> +			kfree(buffer);
>> +			ret = -ENOMEM;
>> +			goto err;
>> +		}
>> +
>> +		memset(buffer->addr, 0, buffer->size);
> See:
> https://lore.kernel.org/lkml/20190108130701.14161-4-hch@lst.de/
> dma_alloc_coherent() always zeros the memory for us hence there
> is no longer a dma_kzalloc_coherent()
> 

thanks for the information. Then the memset here is redundant and will drop it.

>> +
>> +		buffer->index = i;
> 
> Carrying an index inside a list which corresponds directly
> to the position in the list is not particularly nice.
> Why can't we compute this index on the fly where the list
> is walked?  Or am I misunderstanding and the order of the buffers
> is changed in a later patch?
> 

The index is fixed once allocated and I stored it to avoid later
computing. But seems it's highly recommended to compute these sort
of things on the fly when necessary. John recommends the same things
on some other places so I think I can get these addressed.

> As a side note, is a list actually appropriate when we always
> have 4 of these buffers?  Feels like an array of buffer
> structures might be cheaper.
> 
>> +		buffer->size = ctrl->buffer_size;
>> +		list_add_tail(&buffer->list, &ctrl->trace_buf);
>> +	}
>> +
>> +	return 0;
>> +err:
>> +	hisi_ptt_free_trace_buf(hisi_ptt);
>> +	return ret;
>> +}
>> +
>> +static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
>> +{
>> +	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +	hisi_ptt->trace_ctrl.status = HISI_PTT_TRACE_STATUS_OFF;
>> +}
>> +
>> +static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
>> +{
>> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>> +	struct hisi_ptt_dma_buffer *cur;
>> +	u32 val;
>> +
>> +	/* Check device idle before start trace */
>> +	if (hisi_ptt_wait_trace_hw_idle(hisi_ptt)) {
>> +		pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy.\n");
>> +		return -EBUSY;
>> +	}
>> +
>> +	/* Reset the DMA before start tracing */
>> +	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +	val |= HISI_PTT_TRACE_CTRL_RST;
>> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +
>> +	/*
>> +	 * We'll be in the perf context where preemption is disabled,
>> +	 * so use busy loop here.
>> +	 */
>> +	mdelay(HISI_PTT_RESET_WAIT_MS);
> 
> Busy look for 1 second?  Ouch.  If we can reduce this in any way
> that would be great or if there is a means to do it before
> we disable preemption.
> 

It's inherited from the previous version that was using msleep() and it's
somehow unacceptable in an atomic context I think. The reset here is
going to reset the write pointer of the hardware DMA so we can check the
whether the pointer before dereset it. I confirmed with our hardware
teams that it can be reduced to 10us. So I'll poll the write pointer register
for about 10us before continue here.

thanks for catching this!

>> +
>> +	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +	val &= ~HISI_PTT_TRACE_CTRL_RST;
>> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +
>> +	/* Clear the interrupt status */
>> +	writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>> +	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK);
>> +
>> +	/* Configure the trace DMA buffer */
>> +	list_for_each_entry(cur, &ctrl->trace_buf, list) {
> 
> I comment on the use of cur->index above.  Here it would be easy to compute
> the index as we go for example assuming we never end up with holes
> in the list.
> 

ok.

>> +		writel(lower_32_bits(cur->dma),
>> +		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 +
>> +		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
>> +		writel(upper_32_bits(cur->dma),
>> +		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 +
>> +		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
>> +	}
>> +	writel(ctrl->buffer_size, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE);
>> +
>> +	/* Set the trace control register */
>> +	val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type);
>> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction);
>> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format);
>> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter);
>> +	if (!hisi_ptt->trace_ctrl.is_port)
>> +		val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
>> +
>> +	/* Start the Trace */
>> +	val |= HISI_PTT_TRACE_CTRL_EN;
>> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>> +
>> +	ctrl->status = HISI_PTT_TRACE_STATUS_ON;
>> +
>> +	return 0;
>> +}
>> +
> 
> ...
> 
>> +
>> +static void hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt)
>> +{
>> +	struct pci_dev *pdev = hisi_ptt->pdev;
>> +	struct pci_bus *bus;
>> +	u32 reg;
>> +
>> +	INIT_LIST_HEAD(&hisi_ptt->port_filters);
>> +	INIT_LIST_HEAD(&hisi_ptt->req_filters);
>> +
>> +	/*
>> +	 * The device range register provides the information about the
>> +	 * root ports which the RCiEP can control and trace. The RCiEP
>> +	 * and the root ports it support are on the same PCIe core, with
>> +	 * same domain number but maybe different bus number. The device
>> +	 * range register will tell us which root ports we can support,
>> +	 * Bit[31:16] indicates the upper BDF numbers of the root port,
>> +	 * while Bit[15:0] indicates the lower.
>> +	 */
>> +	reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE);
>> +	hisi_ptt->upper = reg >> 16;
>> +	hisi_ptt->lower = reg & 0xffff;
> Trivial:
> Perhaps worthing define HISI_PTT_DEVICE_RANGE_UPPER_MASK etc adn using
> FIELD_GET?
> 

sure.

>> +
>> +	reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION);
>> +	hisi_ptt->core_id = FIELD_GET(HISI_PTT_CORE_ID, reg);
>> +	hisi_ptt->sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg);
>> +
>> +	bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper));
>> +	if (bus)
>> +		pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt);
>> +
>> +	/* Initialize trace controls */
>> +	INIT_LIST_HEAD(&hisi_ptt->trace_ctrl.trace_buf);
>> +	hisi_ptt->trace_ctrl.buffer_size = HISI_PTT_TRACE_BUF_SIZE;
>> +	hisi_ptt->trace_ctrl.default_cpu = cpumask_first(cpumask_of_node(dev_to_node(&pdev->dev)));
>> +}
>> +
[...]
>> +
>> +#define HISI_PCIE_CORE_PORT_ID(devfn)	(PCI_FUNC(devfn) << 1)
>> +
>> +enum hisi_ptt_trace_status {
>> +	HISI_PTT_TRACE_STATUS_OFF = 0,
>> +	HISI_PTT_TRACE_STATUS_ON,
>> +};
> 
> Why not just use a boolean given we only have off and on states?
> 

An enum may make the code more readable I think.

Thanks,
Yicong
Yicong Yang Feb. 14, 2022, 12:51 p.m. UTC | #5
On 2022/2/8 19:07, Yicong Yang wrote:
> On 2022/2/7 19:42, Jonathan Cameron wrote:
>> On Mon, 24 Jan 2022 21:11:11 +0800
>> Yicong Yang <yangyicong@hisilicon.com> wrote:
>>
>>> HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex
>>> integrated Endpoint(RCiEP) device, providing the capability
>>> to dynamically monitor and tune the PCIe traffic, and trace
>>> the TLP headers.
>>>
>>> Add the driver for the device to enable the trace function.
>>> This patch adds basic function of trace, including the device's
>>> probe and initialization, functions for trace buffer allocation
>>> and trace enable/disable, register an interrupt handler to
>>> simply response to the DMA events. The user interface of trace
>>> will be added in the following patch.
>>>
>>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
>> Hi Yicong,
>>
>> I've not been following all the earlier discussion on this driver closely
>> so I may well raise something that has already been addressed. If so
>> just ignore the comment.
> 
> Thanks for the comments. It's ok for me to clarify it :).
> Part replies inline and I need to do some test on the others.
> 
>>
>> Thanks,
>>
>> Jonathan
>>
>>> ---
>>>  drivers/Makefile                 |   1 +
>>>  drivers/hwtracing/Kconfig        |   2 +
>>>  drivers/hwtracing/ptt/Kconfig    |  11 +
>>>  drivers/hwtracing/ptt/Makefile   |   2 +
>>>  drivers/hwtracing/ptt/hisi_ptt.c | 398 +++++++++++++++++++++++++++++++
>>>  drivers/hwtracing/ptt/hisi_ptt.h | 159 ++++++++++++
>>>  6 files changed, 573 insertions(+)
>>>  create mode 100644 drivers/hwtracing/ptt/Kconfig
>>>  create mode 100644 drivers/hwtracing/ptt/Makefile
>>>  create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c
>>>  create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h
>>>
> [...]
>>> +
>>> +static int hisi_ptt_alloc_trace_buf(struct hisi_ptt *hisi_ptt)
>>> +{
>>> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>>> +	struct device *dev = &hisi_ptt->pdev->dev;
>>> +	struct hisi_ptt_dma_buffer *buffer;
>>> +	int i, ret;
>>> +
>>> +	hisi_ptt->trace_ctrl.buf_index = 0;
>>> +
>>> +	/* Make sure the trace buffer is empty before allocating */
>>
>> This comment is misleading as it suggests it not being empty is
>> a bad thing but the code handles it as an acceptable path.
>> Perhaps:
>> 	/*
>> 	 * If the trace buffer has already been allocated, zero the
>> 	 * memory.
>> 	 */
>>
> 
> will make it less misleading. thanks.
> 
>>> +	if (!list_empty(&ctrl->trace_buf)) {
>>> +		list_for_each_entry(buffer, &ctrl->trace_buf, list)
>>> +			memset(buffer->addr, 0, buffer->size);
>>> +		return 0;
>>> +	}
>>> +
>>> +	for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) {
>>> +		buffer = kzalloc(sizeof(*buffer), GFP_KERNEL);
>>> +		if (!buffer) {
>>> +			ret = -ENOMEM;
>>> +			goto err;
>>> +		}
>>> +
>>> +		buffer->addr = dma_alloc_coherent(dev, ctrl->buffer_size,
>>> +						  &buffer->dma, GFP_KERNEL);
>>> +		if (!buffer->addr) {
>>> +			kfree(buffer);
>>> +			ret = -ENOMEM;
>>> +			goto err;
>>> +		}
>>> +
>>> +		memset(buffer->addr, 0, buffer->size);
>> See:
>> https://lore.kernel.org/lkml/20190108130701.14161-4-hch@lst.de/
>> dma_alloc_coherent() always zeros the memory for us hence there
>> is no longer a dma_kzalloc_coherent()
>>
> 
> thanks for the information. Then the memset here is redundant and will drop it.
> 
>>> +
>>> +		buffer->index = i;
>>
>> Carrying an index inside a list which corresponds directly
>> to the position in the list is not particularly nice.
>> Why can't we compute this index on the fly where the list
>> is walked?  Or am I misunderstanding and the order of the buffers
>> is changed in a later patch?
>>
> 
> The index is fixed once allocated and I stored it to avoid later
> computing. But seems it's highly recommended to compute these sort
> of things on the fly when necessary. John recommends the same things
> on some other places so I think I can get these addressed.
> 
>> As a side note, is a list actually appropriate when we always
>> have 4 of these buffers?  Feels like an array of buffer
>> structures might be cheaper.
>>

As suggested here and below, I tried to maintianed the buffers with
an array instead of a list and it looks more straightforward and some
fields of buffer structure can also be dropped. So I think I can change
to use an array.

Thanks for the suggestion!

Yicong

>>> +		buffer->size = ctrl->buffer_size;
>>> +		list_add_tail(&buffer->list, &ctrl->trace_buf);
>>> +	}
>>> +
>>> +	return 0;
>>> +err:
>>> +	hisi_ptt_free_trace_buf(hisi_ptt);
>>> +	return ret;
>>> +}
>>> +
>>> +static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
>>> +{
>>> +	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>> +	hisi_ptt->trace_ctrl.status = HISI_PTT_TRACE_STATUS_OFF;
>>> +}
>>> +
>>> +static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
>>> +{
>>> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>>> +	struct hisi_ptt_dma_buffer *cur;
>>> +	u32 val;
>>> +
>>> +	/* Check device idle before start trace */
>>> +	if (hisi_ptt_wait_trace_hw_idle(hisi_ptt)) {
>>> +		pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy.\n");
>>> +		return -EBUSY;
>>> +	}
>>> +
>>> +	/* Reset the DMA before start tracing */
>>> +	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>> +	val |= HISI_PTT_TRACE_CTRL_RST;
>>> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>> +
>>> +	/*
>>> +	 * We'll be in the perf context where preemption is disabled,
>>> +	 * so use busy loop here.
>>> +	 */
>>> +	mdelay(HISI_PTT_RESET_WAIT_MS);
>>
>> Busy look for 1 second?  Ouch.  If we can reduce this in any way
>> that would be great or if there is a means to do it before
>> we disable preemption.
>>
> 
> It's inherited from the previous version that was using msleep() and it's
> somehow unacceptable in an atomic context I think. The reset here is
> going to reset the write pointer of the hardware DMA so we can check the
> whether the pointer before dereset it. I confirmed with our hardware
> teams that it can be reduced to 10us. So I'll poll the write pointer register
> for about 10us before continue here.
> 
> thanks for catching this!
> 
>>> +
>>> +	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>> +	val &= ~HISI_PTT_TRACE_CTRL_RST;
>>> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>> +
>>> +	/* Clear the interrupt status */
>>> +	writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>>> +	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK);
>>> +
>>> +	/* Configure the trace DMA buffer */
>>> +	list_for_each_entry(cur, &ctrl->trace_buf, list) {
>>
>> I comment on the use of cur->index above.  Here it would be easy to compute
>> the index as we go for example assuming we never end up with holes
>> in the list.
>>
> 
> ok.
> 
>>> +		writel(lower_32_bits(cur->dma),
>>> +		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 +
>>> +		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
>>> +		writel(upper_32_bits(cur->dma),
>>> +		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 +
>>> +		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
>>> +	}
>>> +	writel(ctrl->buffer_size, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE);
>>> +
>>> +	/* Set the trace control register */
>>> +	val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type);
>>> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction);
>>> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format);
>>> +	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter);
>>> +	if (!hisi_ptt->trace_ctrl.is_port)
>>> +		val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
>>> +
>>> +	/* Start the Trace */
>>> +	val |= HISI_PTT_TRACE_CTRL_EN;
>>> +	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>> +
>>> +	ctrl->status = HISI_PTT_TRACE_STATUS_ON;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>
>> ...
>>
>>> +
>>> +static void hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt)
>>> +{
>>> +	struct pci_dev *pdev = hisi_ptt->pdev;
>>> +	struct pci_bus *bus;
>>> +	u32 reg;
>>> +
>>> +	INIT_LIST_HEAD(&hisi_ptt->port_filters);
>>> +	INIT_LIST_HEAD(&hisi_ptt->req_filters);
>>> +
>>> +	/*
>>> +	 * The device range register provides the information about the
>>> +	 * root ports which the RCiEP can control and trace. The RCiEP
>>> +	 * and the root ports it support are on the same PCIe core, with
>>> +	 * same domain number but maybe different bus number. The device
>>> +	 * range register will tell us which root ports we can support,
>>> +	 * Bit[31:16] indicates the upper BDF numbers of the root port,
>>> +	 * while Bit[15:0] indicates the lower.
>>> +	 */
>>> +	reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE);
>>> +	hisi_ptt->upper = reg >> 16;
>>> +	hisi_ptt->lower = reg & 0xffff;
>> Trivial:
>> Perhaps worthing define HISI_PTT_DEVICE_RANGE_UPPER_MASK etc adn using
>> FIELD_GET?
>>
> 
> sure.
> 
>>> +
>>> +	reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION);
>>> +	hisi_ptt->core_id = FIELD_GET(HISI_PTT_CORE_ID, reg);
>>> +	hisi_ptt->sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg);
>>> +
>>> +	bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper));
>>> +	if (bus)
>>> +		pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt);
>>> +
>>> +	/* Initialize trace controls */
>>> +	INIT_LIST_HEAD(&hisi_ptt->trace_ctrl.trace_buf);
>>> +	hisi_ptt->trace_ctrl.buffer_size = HISI_PTT_TRACE_BUF_SIZE;
>>> +	hisi_ptt->trace_ctrl.default_cpu = cpumask_first(cpumask_of_node(dev_to_node(&pdev->dev)));
>>> +}
>>> +
> [...]
>>> +
>>> +#define HISI_PCIE_CORE_PORT_ID(devfn)	(PCI_FUNC(devfn) << 1)
>>> +
>>> +enum hisi_ptt_trace_status {
>>> +	HISI_PTT_TRACE_STATUS_OFF = 0,
>>> +	HISI_PTT_TRACE_STATUS_ON,
>>> +};
>>
>> Why not just use a boolean given we only have off and on states?
>>
> 
> An enum may make the code more readable I think.
> 
> Thanks,
> Yicong
> 
> .
>
diff mbox series

Patch

diff --git a/drivers/Makefile b/drivers/Makefile
index a110338c860c..ab3411e4eba5 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -175,6 +175,7 @@  obj-$(CONFIG_USB4)		+= thunderbolt/
 obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/
 obj-y				+= hwtracing/intel_th/
 obj-$(CONFIG_STM)		+= hwtracing/stm/
+obj-$(CONFIG_HISI_PTT)		+= hwtracing/ptt/
 obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_NVMEM)		+= nvmem/
 obj-$(CONFIG_FPGA)		+= fpga/
diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
index 13085835a636..911ee977103c 100644
--- a/drivers/hwtracing/Kconfig
+++ b/drivers/hwtracing/Kconfig
@@ -5,4 +5,6 @@  source "drivers/hwtracing/stm/Kconfig"
 
 source "drivers/hwtracing/intel_th/Kconfig"
 
+source "drivers/hwtracing/ptt/Kconfig"
+
 endmenu
diff --git a/drivers/hwtracing/ptt/Kconfig b/drivers/hwtracing/ptt/Kconfig
new file mode 100644
index 000000000000..4f4f2459ac47
--- /dev/null
+++ b/drivers/hwtracing/ptt/Kconfig
@@ -0,0 +1,11 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+config HISI_PTT
+	tristate "HiSilicon PCIe Tune and Trace Device"
+	depends on ARM64 && PCI && HAS_DMA && HAS_IOMEM
+	help
+	  HiSilicon PCIe Tune and Trace Device exist as a PCIe RCiEP
+	  device, provides support for PCIe traffic tuning and
+	  tracing TLP headers to the memory.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called hisi_ptt.
diff --git a/drivers/hwtracing/ptt/Makefile b/drivers/hwtracing/ptt/Makefile
new file mode 100644
index 000000000000..908c09a98161
--- /dev/null
+++ b/drivers/hwtracing/ptt/Makefile
@@ -0,0 +1,2 @@ 
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_HISI_PTT) += hisi_ptt.o
diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
new file mode 100644
index 000000000000..6d0a0ca5c0a9
--- /dev/null
+++ b/drivers/hwtracing/ptt/hisi_ptt.c
@@ -0,0 +1,398 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for HiSilicon PCIe tune and trace device
+ *
+ * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
+ * Author: Yicong Yang <yangyicong@hisilicon.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/dma-iommu.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/sysfs.h>
+
+#include "hisi_ptt.h"
+
+static u16 hisi_ptt_get_filter_val(struct pci_dev *pdev)
+{
+	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
+		return BIT(HISI_PCIE_CORE_PORT_ID(PCI_SLOT(pdev->devfn)));
+
+	return PCI_DEVID(pdev->bus->number, pdev->devfn);
+}
+
+static int hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt)
+{
+	u32 val;
+
+	return readl_poll_timeout(hisi_ptt->iobase + HISI_PTT_TRACE_STS, val,
+				  val & HISI_PTT_TRACE_IDLE,
+				  HISI_PTT_WAIT_POLL_INTERVAL_US,
+				  HISI_PTT_WAIT_TIMEOUT_US);
+}
+
+static void hisi_ptt_free_trace_buf(struct hisi_ptt *hisi_ptt)
+{
+	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+	struct device *dev = &hisi_ptt->pdev->dev;
+	struct hisi_ptt_dma_buffer *buffer, *tbuffer;
+
+	list_for_each_entry_safe(buffer, tbuffer, &ctrl->trace_buf, list) {
+		list_del(&buffer->list);
+		dma_free_coherent(dev, buffer->size, buffer->addr,
+				  buffer->dma);
+		kfree(buffer);
+	}
+}
+
+static int hisi_ptt_alloc_trace_buf(struct hisi_ptt *hisi_ptt)
+{
+	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+	struct device *dev = &hisi_ptt->pdev->dev;
+	struct hisi_ptt_dma_buffer *buffer;
+	int i, ret;
+
+	hisi_ptt->trace_ctrl.buf_index = 0;
+
+	/* Make sure the trace buffer is empty before allocating */
+	if (!list_empty(&ctrl->trace_buf)) {
+		list_for_each_entry(buffer, &ctrl->trace_buf, list)
+			memset(buffer->addr, 0, buffer->size);
+		return 0;
+	}
+
+	for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) {
+		buffer = kzalloc(sizeof(*buffer), GFP_KERNEL);
+		if (!buffer) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		buffer->addr = dma_alloc_coherent(dev, ctrl->buffer_size,
+						  &buffer->dma, GFP_KERNEL);
+		if (!buffer->addr) {
+			kfree(buffer);
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		memset(buffer->addr, 0, buffer->size);
+
+		buffer->index = i;
+		buffer->size = ctrl->buffer_size;
+		list_add_tail(&buffer->list, &ctrl->trace_buf);
+	}
+
+	return 0;
+err:
+	hisi_ptt_free_trace_buf(hisi_ptt);
+	return ret;
+}
+
+static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
+{
+	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+	hisi_ptt->trace_ctrl.status = HISI_PTT_TRACE_STATUS_OFF;
+}
+
+static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
+{
+	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
+	struct hisi_ptt_dma_buffer *cur;
+	u32 val;
+
+	/* Check device idle before start trace */
+	if (hisi_ptt_wait_trace_hw_idle(hisi_ptt)) {
+		pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy.\n");
+		return -EBUSY;
+	}
+
+	/* Reset the DMA before start tracing */
+	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+	val |= HISI_PTT_TRACE_CTRL_RST;
+	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+
+	/*
+	 * We'll be in the perf context where preemption is disabled,
+	 * so use busy loop here.
+	 */
+	mdelay(HISI_PTT_RESET_WAIT_MS);
+
+	val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+	val &= ~HISI_PTT_TRACE_CTRL_RST;
+	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+
+	/* Clear the interrupt status */
+	writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+	writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK);
+
+	/* Configure the trace DMA buffer */
+	list_for_each_entry(cur, &ctrl->trace_buf, list) {
+		writel(lower_32_bits(cur->dma),
+		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 +
+		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
+		writel(upper_32_bits(cur->dma),
+		       hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 +
+		       cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
+	}
+	writel(ctrl->buffer_size, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE);
+
+	/* Set the trace control register */
+	val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type);
+	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction);
+	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format);
+	val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter);
+	if (!hisi_ptt->trace_ctrl.is_port)
+		val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
+
+	/* Start the Trace */
+	val |= HISI_PTT_TRACE_CTRL_EN;
+	writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
+
+	ctrl->status = HISI_PTT_TRACE_STATUS_ON;
+
+	return 0;
+}
+
+static irqreturn_t hisi_ptt_isr(int irq, void *context)
+{
+	struct hisi_ptt *hisi_ptt = context;
+	u32 status;
+
+	status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+
+	/* Clear the interrupt status of buffer @buf_idx */
+	writel(status, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t hisi_ptt_irq(int irq, void *context)
+{
+	struct hisi_ptt *hisi_ptt = context;
+	u32 status;
+
+	status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
+	if (!(status & HISI_PTT_TRACE_INT_STAT_MASK))
+		return IRQ_NONE;
+
+	return IRQ_WAKE_THREAD;
+}
+
+static void hisi_ptt_irq_free_vectors(void *pdev)
+{
+	pci_free_irq_vectors(pdev);
+}
+
+static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt)
+{
+	struct pci_dev *pdev = hisi_ptt->pdev;
+	int ret;
+
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+	if (ret < 0) {
+		pci_err(pdev, "failed to allocate irq vector, ret = %d.\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_irq_free_vectors, pdev);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_request_threaded_irq(&pdev->dev,
+					pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ),
+					hisi_ptt_irq, hisi_ptt_isr, 0,
+					"hisi-ptt", hisi_ptt);
+	if (ret) {
+		pci_err(pdev, "failed to request irq %d, ret = %d.\n",
+			pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data)
+{
+	struct hisi_ptt_filter_desc *filter;
+	struct hisi_ptt *hisi_ptt = data;
+	struct list_head *target_list;
+
+	target_list = pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ?
+		      &hisi_ptt->port_filters : &hisi_ptt->req_filters;
+
+	filter = kzalloc(sizeof(*filter), GFP_KERNEL);
+	if (!filter)
+		return -ENOMEM;
+
+	filter->pdev = pdev;
+	filter->val = hisi_ptt_get_filter_val(pdev);
+	list_add_tail(&filter->list, target_list);
+
+	/* Update the available port mask */
+	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
+		hisi_ptt->port_mask |= filter->val;
+
+	return 0;
+}
+
+static void hisi_ptt_release_filters(struct hisi_ptt *hisi_ptt)
+{
+	struct hisi_ptt_filter_desc *filter, *tfilter;
+
+	list_for_each_entry_safe(filter, tfilter, &hisi_ptt->req_filters, list) {
+		list_del(&filter->list);
+		kfree(filter);
+	}
+
+	list_for_each_entry_safe(filter, tfilter, &hisi_ptt->port_filters, list) {
+		list_del(&filter->list);
+		kfree(filter);
+	}
+}
+
+static void hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt)
+{
+	struct pci_dev *pdev = hisi_ptt->pdev;
+	struct pci_bus *bus;
+	u32 reg;
+
+	INIT_LIST_HEAD(&hisi_ptt->port_filters);
+	INIT_LIST_HEAD(&hisi_ptt->req_filters);
+
+	/*
+	 * The device range register provides the information about the
+	 * root ports which the RCiEP can control and trace. The RCiEP
+	 * and the root ports it support are on the same PCIe core, with
+	 * same domain number but maybe different bus number. The device
+	 * range register will tell us which root ports we can support,
+	 * Bit[31:16] indicates the upper BDF numbers of the root port,
+	 * while Bit[15:0] indicates the lower.
+	 */
+	reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE);
+	hisi_ptt->upper = reg >> 16;
+	hisi_ptt->lower = reg & 0xffff;
+
+	reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION);
+	hisi_ptt->core_id = FIELD_GET(HISI_PTT_CORE_ID, reg);
+	hisi_ptt->sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg);
+
+	bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper));
+	if (bus)
+		pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt);
+
+	/* Initialize trace controls */
+	INIT_LIST_HEAD(&hisi_ptt->trace_ctrl.trace_buf);
+	hisi_ptt->trace_ctrl.buffer_size = HISI_PTT_TRACE_BUF_SIZE;
+	hisi_ptt->trace_ctrl.default_cpu = cpumask_first(cpumask_of_node(dev_to_node(&pdev->dev)));
+}
+
+/*
+ * The DMA of PTT trace can only use direct mapping, due to some
+ * hardware restriction. Check whether there is an iommu or the
+ * policy of the iommu domain is passthrough, otherwise the trace
+ * cannot work.
+ */
+static int hisi_ptt_check_iommu_mapping(struct hisi_ptt *hisi_ptt)
+{
+	struct pci_dev *pdev = hisi_ptt->pdev;
+	struct iommu_domain *iommu_domain;
+
+	iommu_domain = iommu_get_domain_for_dev(&pdev->dev);
+	if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY)
+		return 0;
+
+	return -EOPNOTSUPP;
+}
+
+static int hisi_ptt_probe(struct pci_dev *pdev,
+			  const struct pci_device_id *id)
+{
+	struct hisi_ptt *hisi_ptt;
+	int ret;
+
+	hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL);
+	if (!hisi_ptt)
+		return -ENOMEM;
+
+	mutex_init(&hisi_ptt->mutex);
+	hisi_ptt->pdev = pdev;
+
+	/*
+	 * Lifetime of pci_dev is longer than hisi_ptt,
+	 * so directly reference to the pci name string.
+	 */
+	hisi_ptt->name = pci_name(hisi_ptt->pdev);
+	pci_set_drvdata(pdev, hisi_ptt);
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		pci_err(pdev, "failed to enable device, ret = %d.\n", ret);
+		return ret;
+	}
+
+	ret = pcim_iomap_regions(pdev, BIT(2), hisi_ptt->name);
+	if (ret) {
+		pci_err(pdev, "failed to remap io memory, ret = %d.\n", ret);
+		return ret;
+	}
+
+	hisi_ptt->iobase = pcim_iomap_table(pdev)[2];
+
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+	if (ret) {
+		pci_err(pdev, "failed to set 64 bit dma mask, ret = %d.\n", ret);
+		return ret;
+	}
+	pci_set_master(pdev);
+
+	ret = hisi_ptt_register_irq(hisi_ptt);
+	if (ret)
+		return ret;
+
+	hisi_ptt_init_ctrls(hisi_ptt);
+
+	ret = hisi_ptt_check_iommu_mapping(hisi_ptt);
+	if (ret) {
+		pci_err(pdev, "cannot work with non-direct DMA mapping.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+void hisi_ptt_remove(struct pci_dev *pdev)
+{
+	struct hisi_ptt *hisi_ptt = pci_get_drvdata(pdev);
+
+	if (hisi_ptt->trace_ctrl.status == HISI_PTT_TRACE_STATUS_ON)
+		hisi_ptt_trace_end(hisi_ptt);
+
+	hisi_ptt_free_trace_buf(hisi_ptt);
+	hisi_ptt_release_filters(hisi_ptt);
+}
+
+static const struct pci_device_id hisi_ptt_id_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa12e) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, hisi_ptt_id_tbl);
+
+static struct pci_driver hisi_ptt_driver = {
+	.name = "hisi_ptt",
+	.id_table = hisi_ptt_id_tbl,
+	.probe = hisi_ptt_probe,
+	.remove = hisi_ptt_remove,
+};
+module_pci_driver(hisi_ptt_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>");
+MODULE_DESCRIPTION("Driver for HiSilicon PCIe tune and trace device");
diff --git a/drivers/hwtracing/ptt/hisi_ptt.h b/drivers/hwtracing/ptt/hisi_ptt.h
new file mode 100644
index 000000000000..8aa5d6b78cc5
--- /dev/null
+++ b/drivers/hwtracing/ptt/hisi_ptt.h
@@ -0,0 +1,159 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for HiSilicon PCIe tune and trace device
+ *
+ * Copyright (c) 2022 HiSilicon Technologies Co., Ltd.
+ * Author: Yicong Yang <yangyicong@hisilicon.com>
+ */
+
+#ifndef _HISI_PTT_H
+#define _HISI_PTT_H
+
+#include <linux/bits.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+/*
+ * The definition of the device registers and register fields.
+ */
+#define HISI_PTT_TRACE_ADDR_SIZE	0x0800
+#define HISI_PTT_TRACE_ADDR_BASE_LO_0	0x0810
+#define HISI_PTT_TRACE_ADDR_BASE_HI_0	0x0814
+#define HISI_PTT_TRACE_ADDR_STRIDE	0x8
+#define HISI_PTT_TRACE_CTRL		0x0850
+#define   HISI_PTT_TRACE_CTRL_EN	BIT(0)
+#define   HISI_PTT_TRACE_CTRL_RST	BIT(1)
+#define   HISI_PTT_TRACE_CTRL_RXTX_SEL	GENMASK(3, 2)
+#define   HISI_PTT_TRACE_CTRL_TYPE_SEL	GENMASK(7, 4)
+#define   HISI_PTT_TRACE_CTRL_DATA_FORMAT	BIT(14)
+#define   HISI_PTT_TRACE_CTRL_FILTER_MODE	BIT(15)
+#define   HISI_PTT_TRACE_CTRL_TARGET_SEL	GENMASK(31, 16)
+#define HISI_PTT_TRACE_INT_STAT		0x0890
+#define   HISI_PTT_TRACE_INT_STAT_MASK	GENMASK(3, 0)
+#define HISI_PTT_TRACE_INT_MASK		0x0894
+#define HISI_PTT_TRACE_WR_STS		0x08a0
+#define   HISI_PTT_TRACE_WR_STS_WRITE	GENMASK(27, 0)
+#define   HISI_PTT_TRACE_WR_STS_BUFFER	GENMASK(29, 28)
+#define HISI_PTT_TRACE_STS		0x08b0
+#define   HISI_PTT_TRACE_IDLE		BIT(0)
+#define HISI_PTT_DEVICE_RANGE		0x0fe0
+#define HISI_PTT_LOCATION		0x0fe8
+#define   HISI_PTT_CORE_ID		GENMASK(15, 0)
+#define   HISI_PTT_SICL_ID		GENMASK(31, 16)
+
+/* Parameters of PTT trace DMA part. */
+#define HISI_PTT_TRACE_DMA_IRQ			0
+#define HISI_PTT_TRACE_BUF_CNT			4
+#define HISI_PTT_TRACE_BUF_SIZE			SZ_4M
+#define HISI_PTT_TRACE_TOTAL_BUF_SIZE		(HISI_PTT_TRACE_BUF_SIZE * \
+						 HISI_PTT_TRACE_BUF_CNT)
+/* Wait time for DMA hardware to reset */
+#define HISI_PTT_RESET_WAIT_MS		1000UL
+/* Poll timeout and interval for waiting hardware work to finish */
+#define HISI_PTT_WAIT_TIMEOUT_US	1000000UL
+#define HISI_PTT_WAIT_POLL_INTERVAL_US	100UL
+
+#define HISI_PCIE_CORE_PORT_ID(devfn)	(PCI_FUNC(devfn) << 1)
+
+enum hisi_ptt_trace_status {
+	HISI_PTT_TRACE_STATUS_OFF = 0,
+	HISI_PTT_TRACE_STATUS_ON,
+};
+
+/**
+ * struct hisi_ptt_dma_buffer - describe a single trace buffer of PTT trace.
+ *                              The detail of the data format is described
+ *                              in the documentation of PTT device.
+ * @list:  entry of this buffer in the buffer list
+ * @size:  size of this buffer
+ * @dma:   DMA address of this buffer visible to the device
+ * @addr:  virtual address of this buffer visible to the cpu
+ * @index: index of this buffer in the buffer list
+ */
+struct hisi_ptt_dma_buffer {
+	struct list_head list;
+	unsigned int size;
+	dma_addr_t dma;
+	void *addr;
+	int index;
+};
+
+/**
+ * struct hisi_ptt_trace_ctrl - control and status of PTT trace
+ * @status:      current trace status
+ * @trace_buf:   the trace buffers for holding the trace data
+ * @default_cpu: default cpu to start the trace session
+ * @buffer_size: the size of each trace buffer in the list
+ * @buf_index:   the index of current using trace buffer
+ * @is_port:     whether we're tracing root port or not
+ * @direction:   direction of the TLP headers to trace
+ * @filter:      filter value for tracing the TLP headers
+ * @format:      format of the TLP headers to trace
+ * @type:        type of the TLP headers to trace
+ */
+struct hisi_ptt_trace_ctrl {
+	enum hisi_ptt_trace_status status;
+	struct list_head trace_buf;
+	int default_cpu;
+	u32 buffer_size;
+	u32 buf_index;
+	bool is_port;
+	u32 direction:2;
+	u32 filter:16;
+	u32 format:1;
+	u32 type:4;
+};
+
+/**
+ * struct hisi_ptt_filter_desc - descriptor of the PTT trace filter
+ * @list: entry of this descriptor in the filter list
+ * @pdev: pci_dev related to this filter
+ * @val:  filter value for the device
+ */
+struct hisi_ptt_filter_desc {
+	struct list_head list;
+	struct pci_dev *pdev;
+	u16 val;
+};
+
+/**
+ * struct hisi_ptt - per PTT device data
+ * @trace_ctrl:   the control information of PTT trace
+ * @iobase:       base IO address of the device
+ * @pdev:         pci_dev of this PTT device
+ * @mutex:        mutex to protect the filter list and serialize the perf process.
+ * @name:         name of the PTT device
+ * @core_id:      PCIe core ID this PTT device locates
+ * @sicl_id:      SICL ID this PTT device locates
+ * @upper:        the upper BDF range of the PCI devices managed by this PTT device
+ * @lower:        the lower BDF range of the PCI devices managed by this PTT device
+ * @port_filters: the filter list of root ports
+ * @req_filters:  the filter list of requester ID
+ * @port_mask:    port mask of the managed root ports
+ */
+struct hisi_ptt {
+	struct hisi_ptt_trace_ctrl trace_ctrl;
+	void __iomem *iobase;
+	struct pci_dev *pdev;
+	struct mutex mutex;
+	const char *name;
+	u16 core_id;
+	u16 sicl_id;
+	u32 upper;
+	u32 lower;
+
+	/*
+	 * The trace TLP headers can either be filtered by certain
+	 * root port, or by the requester ID. Organize the filters
+	 * by @port_filters and @req_filters here. The mask of all
+	 * the valid ports is also cached for doing sanity check
+	 * of user input.
+	 */
+	struct list_head port_filters;
+	struct list_head req_filters;
+	u16 port_mask;
+};
+
+#endif /* _HISI_PTT_H */