diff mbox series

[v6,01/24] dmaengine: Fix dma_slave_config.dst_addr description

Message ID 20221107210438.1515-2-Sergey.Semin@baikalelectronics.ru (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series dmaengine: dw-edma: Add RP/EP local DMA controllers support | expand

Commit Message

Serge Semin Nov. 7, 2022, 9:04 p.m. UTC
Most likely due to a copy-paste mistake the dst_addr member of the
dma_slave_config structure has been marked as ignored if the !source!
address belong to the memory. That is relevant to the src_addr field of
the structure while the dst_addr field as containing a destination device
address is supposed to be ignored if the destination is the CPU memory.
Let's fix the field description accordingly.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
---
 include/linux/dmaengine.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index c923f4e60f24..0c020682d894 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -394,7 +394,7 @@  enum dma_slave_buswidth {
  * should be read (RX), if the source is memory this argument is
  * ignored.
  * @dst_addr: this is the physical address where DMA slave data
- * should be written (TX), if the source is memory this argument
+ * should be written (TX), if the destination is memory this argument
  * is ignored.
  * @src_addr_width: this is the width in bytes of the source (RX)
  * register where DMA data shall be read. If the source