From patchwork Sun Nov 13 19:12:51 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 13041743 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6615CC3A59E for ; Sun, 13 Nov 2022 19:15:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235610AbiKMTPH (ORCPT ); Sun, 13 Nov 2022 14:15:07 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46352 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235563AbiKMTPC (ORCPT ); Sun, 13 Nov 2022 14:15:02 -0500 Received: from post.baikalelectronics.com (post.baikalelectronics.com [213.79.110.86]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 09DE7DF98; Sun, 13 Nov 2022 11:14:56 -0800 (PST) Received: from post.baikalelectronics.com (localhost.localdomain [127.0.0.1]) by post.baikalelectronics.com (Proxmox) with ESMTP id 2CA9AE0EC0; Sun, 13 Nov 2022 22:14:55 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= baikalelectronics.ru; h=cc:cc:content-transfer-encoding :content-type:content-type:date:from:from:in-reply-to:message-id :mime-version:references:reply-to:subject:subject:to:to; s=post; bh=l31SF5y7sAxew+L4EIhzUcvzeS+nODvJT0w8PxamkJo=; b=l++UoykOPtzB Z0Bx3ex6J0UUX/zZ+flH+BabG5b/JRgbKuRsEp86W04Nbi3ggIfHeYufCwabTKMG bPcK+kRSZDGNPihuQ85bF47I7ps3zFb354kC90lSOsQhjc7S1TU3HVWbikdg13Mi DA8QuxuR546RAFzeosmEjCuBv7rVpok= Received: from mail.baikal.int (mail.baikal.int [192.168.51.25]) by post.baikalelectronics.com (Proxmox) with ESMTP id 17CE4E0E6A; Sun, 13 Nov 2022 22:14:55 +0300 (MSK) Received: from localhost (192.168.168.10) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Sun, 13 Nov 2022 22:14:54 +0300 From: Serge Semin To: Rob Herring , Rob Herring , Krzysztof Kozlowski , Bjorn Helgaas , Lorenzo Pieralisi , Cai Huoqing , Robin Murphy , Jingoo Han , Gustavo Pimentel CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , =?utf-8?q?Krzys?= =?utf-8?q?ztof_Wilczy=C5=84ski?= , Frank Li , Manivannan Sadhasivam , caihuoqing , Vinod Koul , , , Subject: [PATCH v7 10/20] dt-bindings: PCI: dwc: Add reg/reg-names common properties Date: Sun, 13 Nov 2022 22:12:51 +0300 Message-ID: <20221113191301.5526-11-Sergey.Semin@baikalelectronics.ru> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221113191301.5526-1-Sergey.Semin@baikalelectronics.ru> References: <20221113191301.5526-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-Originating-IP: [192.168.168.10] X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Even though there is a more-or-less limited set of the CSR spaces can be defined for each DW PCIe controller the generic DT-schema currently doesn't specify much limitations on the reg-space names used for one or another range. In order to prevent the vendor-specific controller schemas further deviation from the generic interface let's fix that by introducing the reg-names definition in the common DW PCIe DT-schemas and preserving the generic "reg" and "reg-names" properties in there. New DW PCIe device DT-bindings are encouraged to use the generic set of the CSR spaces defined in the generic DW PCIe RP/EP DT-bindings, while the already available vendor-specific DT-bindings can still apple the common DT-schemas. Note the number of reg/reg-names items need to be changed in the DW PCIe EP DT-schema since aside with the "dbi" CSRs space these arrays can have "dbi2", "addr_space", "atu", etc ranges. Also note since there are DW PCIe-based vendor-specific DT-bindings with the custom names assigned to the same CSR resources we have no much choice but to add them to the generic DT-schemas in order to have the schemas being applicable for such devices. These names are marked as vendor-specific and should be avoided being used in new bindings in favor of the generic names. Signed-off-by: Serge Semin Reviewed-by: Rob Herring --- Changelog v3: - This is a new patch unpinned from the next one: https://lore.kernel.org/linux-pci/20220503214638.1895-2-Sergey.Semin@baikalelectronics.ru/ by the Rob' request. (@Rob) - Split up reg-names in the same way as the interrupt-names: common, Root Port and Endpoint specific names. (@Rob) - Drop synonymous from the names list since the device schemas create their own enumerations anyway. Changelog v5: - Add platform-specific reg names, but mark them as deprecated. Changelog v6: - Move the common reg-names definitions to the RP/EP schemas. Thus drop the 'definitions' property. (@Rob) - Drop the 'deprecated' keywords from the vendor-specific names. (@Rob) --- .../bindings/pci/snps,dw-pcie-common.yaml | 22 +++++ .../bindings/pci/snps,dw-pcie-ep.yaml | 82 +++++++++++++++++-- .../devicetree/bindings/pci/snps,dw-pcie.yaml | 78 ++++++++++++++++-- 3 files changed, 169 insertions(+), 13 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml index 4646fb14e817..13c41cd50e54 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml @@ -17,6 +17,28 @@ description: select: false properties: + reg: + description: + DWC PCIe CSR space is normally accessed over the dedicated Data Bus + Interface - DBI. In accordance with the reference manual the register + configuration space belongs to the Configuration-Dependent Module (CDM) + and is split up into several sub-parts Standard PCIe configuration + space, Port Logic Registers (PL), Shadow Config-space Registers, + iATU/eDMA registers. The particular sub-space is selected by the + CDM/ELBI (dbi_cs) and CS2 (dbi_cs2) signals (selector bits). Such + configuration provides a flexible interface for the system engineers to + either map the particular space at a desired MMIO address or just leave + them in a contiguous memory space if pure Native or AXI Bridge DBI access + is selected. Note the PCIe CFG-space, PL and Shadow registers are + specific for each activated function, while the rest of the sub-spaces + are common for all of them (if there are more than one). + minItems: 2 + maxItems: 6 + + reg-names: + minItems: 2 + maxItems: 6 + interrupts: description: There are two main sub-blocks which are normally capable of diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index 7d3f8fc8b7b4..f4d7eb2dec4d 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -28,18 +28,86 @@ allOf: properties: reg: - description: | - It should contain Data Bus Interface (dbi) and config registers for all - versions. - For designware core version >= 4.80, it may contain ATU address space. + description: + DBI, DBI2 reg-spaces and outbound memory window are required for the + normal controller functioning. iATU memory IO region is also required + if the space is unrolled (IP-core version >= 4.80a). minItems: 2 - maxItems: 4 + maxItems: 5 reg-names: minItems: 2 - maxItems: 4 + maxItems: 5 items: - enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl] + oneOf: + - description: + Basic DWC PCIe controller configuration-space accessible over + the DBI interface. This memory space is either activated with + CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region + with all spaces. Note iATU/eDMA CSRs are indirectly accessible + via the PL viewports on the DWC PCIe controllers older than + v4.80a. + const: dbi + - description: + Shadow DWC PCIe config-space registers. This space is selected + by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of + the PCI-SIG PCIe CFG-space with the shadow registers for some + PCI Header space, PCI Standard and Extended Structures. It's + mainly relevant for the end-point controller configuration, + but still there are some shadow registers available for the + Root Port mode too. + const: dbi2 + - description: + External Local Bus registers. It's an application-dependent + registers normally defined by the platform engineers. The space + can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can + be accessed over some platform-specific means (for instance + as a part of a system controller). + enum: [ elbi, app ] + - description: + iATU/eDMA registers common for all device functions. It's an + unrolled memory space with the internal Address Translation + Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1 + and CS2 = 1. For IP-core releases prior v4.80a, these registers + have been programmed via an indirect addressing scheme using a + set of viewport CSRs mapped into the PL space. Note iATU is + normally mapped to the 0x0 address of this region, while eDMA + is available at 0x80000 base address. + const: atu + - description: + Platform-specific eDMA registers. Some platforms may have eDMA + CSRs mapped in a non-standard base address. The registers offset + can be changed or the MS/LS-bits of the address can be attached + in an additional RTL block before the MEM-IO transactions reach + the DW PCIe slave interface. + const: dma + - description: + PHY/PCS configuration registers. Some platforms can have the + PCS and PHY CSRs accessible over a dedicated memory mapped + region, but mainly these registers are indirectly accessible + either by means of the embedded PHY viewport schema or by some + platform-specific method. + const: phy + - description: + Outbound iATU-capable memory-region which will be used to + generate various application-specific traffic on the PCIe bus + hierarchy. It's usage scenario depends on the endpoint + functionality, for instance it can be used to create MSI(X) + messages. + const: addr_space + - description: + Vendor-specific CSR names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native 'elbi/app' CSR region for details. + enum: [ link, appl ] + - description: See native 'atu' CSR region for details. + enum: [ atu_dma ] + allOf: + - contains: + const: dbi + - contains: + const: addr_space interrupts: description: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index fa1db57b2b97..59d3bbb5883a 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -28,10 +28,10 @@ allOf: properties: reg: - description: | - It should contain Data Bus Interface (dbi) and config registers for all - versions. - For designware core version >= 4.80, it may contain ATU address space. + description: + At least DBI reg-space and peripheral devices CFG-space outbound window + are required for the normal controller work. iATU memory IO region is + also required if the space is unrolled (IP-core version >= 4.80a). minItems: 2 maxItems: 5 @@ -39,8 +39,74 @@ properties: minItems: 2 maxItems: 5 items: - enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl, - parf, cfg, link, ulreg, smu, mpu, apb, phy ] + oneOf: + - description: + Basic DWC PCIe controller configuration-space accessible over + the DBI interface. This memory space is either activated with + CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region + with all spaces. Note iATU/eDMA CSRs are indirectly accessible + via the PL viewports on the DWC PCIe controllers older than + v4.80a. + const: dbi + - description: + Shadow DWC PCIe config-space registers. This space is selected + by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of + the PCI-SIG PCIe CFG-space with the shadow registers for some + PCI Header space, PCI Standard and Extended Structures. It's + mainly relevant for the end-point controller configuration, + but still there are some shadow registers available for the + Root Port mode too. + const: dbi2 + - description: + External Local Bus registers. It's an application-dependent + registers normally defined by the platform engineers. The space + can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can + be accessed over some platform-specific means (for instance + as a part of a system controller). + enum: [ elbi, app ] + - description: + iATU/eDMA registers common for all device functions. It's an + unrolled memory space with the internal Address Translation + Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1 + and CS2 = 1. For IP-core releases prior v4.80a, these registers + have been programmed via an indirect addressing scheme using a + set of viewport CSRs mapped into the PL space. Note iATU is + normally mapped to the 0x0 address of this region, while eDMA + is available at 0x80000 base address. + const: atu + - description: + Platform-specific eDMA registers. Some platforms may have eDMA + CSRs mapped in a non-standard base address. The registers offset + can be changed or the MS/LS-bits of the address can be attached + in an additional RTL block before the MEM-IO transactions reach + the DW PCIe slave interface. + const: dma + - description: + PHY/PCS configuration registers. Some platforms can have the + PCS and PHY CSRs accessible over a dedicated memory mapped + region, but mainly these registers are indirectly accessible + either by means of the embedded PHY viewport schema or by some + platform-specific method. + const: phy + - description: + Outbound iATU-capable memory-region which will be used to access + the peripheral PCIe devices configuration space. + const: config + - description: + Vendor-specific CSR names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native 'elbi/app' CSR region for details. + enum: [ apb, mgmt, link, ulreg, appl ] + - description: See native 'atu' CSR region for details. + enum: [ atu_dma ] + - description: Syscon-related CSR regions. + enum: [ smu, mpu ] + allOf: + - contains: + const: dbi + - contains: + const: config interrupts: description: