| Message ID | 20230315064255.15591-15-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Qcom PCIe cleanups and improvements | expand |
On 15/03/2023 07:42, Manivannan Sadhasivam wrote: > "mhi" register region contains the MHI registers that could be used by > the PCIe controller drivers to get debug information like PCIe link > transition counts on newer SoCs. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> This is a friendly reminder during the review process. It looks like you received a tag and forgot to add it. If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst#L540 If a tag was not added on purpose, please state why and what changed. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index fb32c43dd12d..ecbb0f9efa21 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -44,11 +44,11 @@ properties: reg: minItems: 4 - maxItems: 5 + maxItems: 6 reg-names: minItems: 4 - maxItems: 5 + maxItems: 6 interrupts: minItems: 1 @@ -185,13 +185,15 @@ allOf: properties: reg: minItems: 4 - maxItems: 4 + maxItems: 5 reg-names: + minItems: 4 items: - const: parf # Qualcomm specific registers - const: dbi # DesignWare PCIe registers - const: elbi # External local bus interface registers - const: config # PCIe configuration space + - const: mhi # MHI registers - if: properties: @@ -209,14 +211,16 @@ allOf: properties: reg: minItems: 5 - maxItems: 5 + maxItems: 6 reg-names: + minItems: 5 items: - const: parf # Qualcomm specific registers - const: dbi # DesignWare PCIe registers - const: elbi # External local bus interface registers - const: atu # ATU address space - const: config # PCIe configuration space + - const: mhi # MHI registers - if: properties:
"mhi" register region contains the MHI registers that could be used by the PCIe controller drivers to get debug information like PCIe link transition counts on newer SoCs. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- Documentation/devicetree/bindings/pci/qcom,pcie.yaml | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)