| Message ID | 20230510065819.3987-2-wsa+renesas@sang-engineering.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Krzysztof Wilczyński |
| Headers | show |
| Series | KingFisher: support regulators for PCIe | expand |
On Wed, May 10, 2023 at 8:59 AM Wolfram Sang <wsa+renesas@sang-engineering.com> wrote: > Support regulators found on the e.g. KingFisher board for miniPCIe and > add a 12v regulator while we are here. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > --- > > Changes since RFC: > * added 12V supply for completeness > * use PCIe slot in the example instead of miniPCIe because that is what > the Koelsch board offers (just without the regulators ;)) Same for e.g. Salvator-XS. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert
On 10/05/2023 08:58, Wolfram Sang wrote: > Support regulators found on the e.g. KingFisher board for miniPCIe and > add a 12v regulator while we are here. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > --- > > Changes since RFC: > * added 12V supply for completeness > * use PCIe slot in the example instead of miniPCIe because that is what > the Koelsch board offers (just without the regulators ;)) > > .../devicetree/bindings/pci/rcar-pci-host.yaml | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml index 8fdfbc763d70..b6a7cb32f61e 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml @@ -68,6 +68,15 @@ properties: phy-names: const: pcie + vpcie1v5-supply: + description: The 1.5v regulator to use for PCIe. + + vpcie3v3-supply: + description: The 3.3v regulator to use for PCIe. + + vpcie12v-supply: + description: The 12v regulator to use for PCIe. + required: - compatible - reg @@ -121,5 +130,7 @@ examples: clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; resets = <&cpg 319>; + vpcie3v3-supply = <&pcie_3v3>; + vpcie12v-supply = <&pcie_12v>; }; };
Support regulators found on the e.g. KingFisher board for miniPCIe and add a 12v regulator while we are here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- Changes since RFC: * added 12V supply for completeness * use PCIe slot in the example instead of miniPCIe because that is what the Koelsch board offers (just without the regulators ;)) .../devicetree/bindings/pci/rcar-pci-host.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+)