diff mbox series

[v2,1/2] dt-bindings: PCI: microchip,pcie-host: fix reg properties

Message ID 20240612-shrubs-liquid-95ed126a5544@spud (mailing list archive)
State Superseded
Delegated to: Krzysztof WilczyƄski
Headers show
Series PCI: microchip: support using either instance 1 or 2 | expand

Commit Message

Conor Dooley June 12, 2024, 10:57 a.m. UTC
From: Conor Dooley <conor.dooley@microchip.com>

The PCI host controller on PolarFire SoC has multiple "instances", each
with their own bridge and ctrl address spaces. The original binding has
an "apb" register region, and it is expected to be set to the base
address of the host controllers register space. Some defines in the
Linux driver were used to compute the addresses of the bridge and ctrl
address ranges corresponding to instance1. Some customers want to use
instance2 however and that requires changing the defines in the driver,
which is clearly not a portable solution.

Remove this "apb" register region from the binding and add "bridge" &
"ctrl" regions instead, that will directly communicate the address of
these regions

Fixes: 6ee6c89aac35 ("dt-bindings: PCI: microchip: Add Microchip PolarFire host binding")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
 .../devicetree/bindings/pci/microchip,pcie-host.yaml   | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
diff mbox series


diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index 5d7aec5f54e7..45c14b6e4aa4 100644
--- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -18,12 +18,13 @@  properties:
     const: microchip,pcie-host-1.0 # PolarFire
-    maxItems: 2
+    maxItems: 3
       - const: cfg
-      - const: apb
+      - const: bridge
+      - const: ctrl
@@ -115,8 +116,9 @@  examples:
             pcie0: pcie@2030000000 {
                     compatible = "microchip,pcie-host-1.0";
                     reg = <0x0 0x70000000 0x0 0x08000000>,
-                          <0x0 0x43000000 0x0 0x00010000>;
-                    reg-names = "cfg", "apb";
+                          <0x0 0x43008000 0x0 0x00002000>,
+                          <0x0 0x4300a000 0x0 0x00002000>;
+                    reg-names = "cfg", "bridge", "ctrl";
                     device_type = "pci";
                     #address-cells = <3>;
                     #size-cells = <2>;