From patchwork Fri Jun 28 11:59:22 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daire McNamara X-Patchwork-Id: 13716010 X-Patchwork-Delegate: kw@linux.com Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.153.233]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id AED8D1586FE; Fri, 28 Jun 2024 12:00:02 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=68.232.153.233 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719576004; cv=none; b=EZpJM6PyiQCMkxepZ5Ph3ieGK3VjgalTIL3/fJpiv4dSvTJrX/QuCxQBNf87x8yrjRNsWLOiFLPG9hGk1sTmhgaEBiPzqZHcG98upSIy/GRfXniaidWnmNguuTd/fgOD4ZrpZ59evmRE+IhEML432siFjCAZL5OJO33e8JIZzhE= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719576004; c=relaxed/simple; bh=2LGfejxUQh2ogeG58xChGdC3cor015XXbvEcy1WCcwc=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=K4n6E1+53EmMjETioTLbHrD7xKW6993z4PoVm1GCzNCVvjwgKCvUyXtC8NM8XorG0TUSBhQf2U+kqfixR66nSndl+NffX7Vm83e/VLwiCbpi+v4Wvd/3zAK2w10ciHtGfuHWLvIywbLM4YMQOXK811dV1g5p0obYFm7ySErWt/w= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=microchip.com; spf=pass smtp.mailfrom=microchip.com; dkim=pass (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b=a7aXF6b3; arc=none smtp.client-ip=68.232.153.233 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=microchip.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=microchip.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=microchip.com header.i=@microchip.com header.b="a7aXF6b3" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1719576003; x=1751112003; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=2LGfejxUQh2ogeG58xChGdC3cor015XXbvEcy1WCcwc=; b=a7aXF6b3b6nlqIGHQHZ9TWE9qVlGb87vUTRZNc5T8CtGbqJbnPUi/icE coztY8Nd1S6IsxCRO3bk6hVFqssL3oHmpxhE6sVGZSwEyikwWuZEKo9vE YEbRfQFRi2UFghpRyzZOjirCIbHMsl95XpVQkcdnyLBMUlyHH8TW3povW zx591cxCBbaeSS+gLTFdxaLWMT6oBaav8dtS6olgVRQLfMSuR5Dt2ooJq VdtYEgDK9Px9Y8ckiYOk2ObxZcpzmHbSZhq6BycBOexuck8IqqMo08v0V J0bGV40nTkcCGxkmZQ7rH3sHxrLF/YS/LsVdEJ0Tclmks9ziJ6FKB61dd Q==; X-CSE-ConnectionGUID: fhzcQ281QiKf1QfzQI0hzg== X-CSE-MsgGUID: Ye5I7pgLSbGEftYhiCzhBw== X-IronPort-AV: E=Sophos;i="6.09,169,1716274800"; d="scan'208";a="259502561" X-Amp-Result: SKIPPED(no attachment in message) Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa5.microchip.iphmx.com with ESMTP/TLS/ECDHE-RSA-AES128-GCM-SHA256; 28 Jun 2024 05:00:00 -0700 Received: from chn-vm-ex04.mchp-main.com (10.10.85.152) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.35; Fri, 28 Jun 2024 04:59:30 -0700 Received: from daire-X570.microchip.com (10.10.85.11) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server id 15.1.2507.35 via Frontend Transport; Fri, 28 Jun 2024 04:59:27 -0700 From: To: , CC: , , , , , , , , , , Subject: [PATCH v6 2/3] PCI: microchip: Fix inbound address translation tables Date: Fri, 28 Jun 2024 12:59:22 +0100 Message-ID: <20240628115923.4133286-3-daire.mcnamara@microchip.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240628115923.4133286-1-daire.mcnamara@microchip.com> References: <20240628115923.4133286-1-daire.mcnamara@microchip.com> Precedence: bulk X-Mailing-List: linux-pci@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 From: Daire McNamara On Microchip PolarFire SoC the PCIe Root Port can be behind one of three general purpose Fabric Interface Controller (FIC) buses that encapsulates an AXI-S bus. Depending on which FIC(s) the Root Port is connected through to CPU space, and what address translation is done by that FIC, the Root Port driver's inbound address translation may vary. For all current supported designs and all future expected designs, inbound address translation done by a FIC on PolarFire SoC varies depending on whether PolarFire SoC in operating in dma-coherent mode or dma-noncoherent mode. The setup of the outbound address translation tables in the root port driver only needs to handle these two cases. Setup the inbound address translation tables to one of two address translations, depending on whether the rootport is marked as dma-coherent or dma-noncoherent. Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip Polarfire PCIe controller driver") Signed-off-by: Daire McNamara Acked-by: Conor Dooley --- drivers/pci/controller/pcie-microchip-host.c | 106 +++++++++++++++++-- 1 file changed, 97 insertions(+), 9 deletions(-) diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c index 47c397ae515a..27bfa3b7a187 100644 --- a/drivers/pci/controller/pcie-microchip-host.c +++ b/drivers/pci/controller/pcie-microchip-host.c @@ -7,16 +7,20 @@ * Author: Daire McNamara */ +#include #include +#include #include #include #include +#include #include #include #include #include #include #include +#include #include "../pci.h" @@ -32,6 +36,9 @@ #define MC_PCIE_BRIDGE_ADDR (MC_PCIE1_BRIDGE_ADDR) #define MC_PCIE_CTRL_ADDR (MC_PCIE1_CTRL_ADDR) +#define MC_MAX_NUM_INBOUND_WINDOWS 8 +#define MPFS_NC_BOUNCE_ADDR 0x80000000 + /* PCIe Bridge Phy Regs */ #define PCIE_PCI_IRQ_DW0 0xa8 #define MSIX_CAP_MASK BIT(31) @@ -99,14 +106,15 @@ /* PCIe AXI slave table init defines */ #define ATR0_AXI4_SLV0_SRCADDR_PARAM 0x800u -#define ATR_SIZE_SHIFT 1 -#define ATR_IMPL_ENABLE 1 +#define ATR_SIZE_MASK GENMASK(6, 1) +#define ATR_IMPL_ENABLE BIT(0) #define ATR0_AXI4_SLV0_SRC_ADDR 0x804u #define ATR0_AXI4_SLV0_TRSL_ADDR_LSB 0x808u #define ATR0_AXI4_SLV0_TRSL_ADDR_UDW 0x80cu #define ATR0_AXI4_SLV0_TRSL_PARAM 0x810u #define PCIE_TX_RX_INTERFACE 0x00000000u #define PCIE_CONFIG_INTERFACE 0x00000001u +#define TRSL_ID_AXI4_MASTER_0 0x00000004u #define ATR_ENTRY_SIZE 32 @@ -933,6 +941,86 @@ static int mc_pcie_init_irq_domains(struct mc_pcie *port) return mc_allocate_msi_domains(port); } +static void mc_pcie_setup_inbound_atr(int window_index, u64 axi_addr, u64 pcie_addr, u64 size) +{ + void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR; + u32 table_offset = window_index * ATR_ENTRY_SIZE; + void __iomem *table_addr = bridge_base_addr + table_offset; + u32 atr_sz; + u32 val; + + atr_sz = ilog2(size) - 1; + + val = ALIGN_DOWN(lower_32_bits(pcie_addr), SZ_4K); + val |= FIELD_PREP(ATR_SIZE_MASK, atr_sz); + val |= ATR_IMPL_ENABLE; + + writel(val, table_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); + + writel(upper_32_bits(pcie_addr), table_addr + ATR0_PCIE_WIN0_SRC_ADDR); + + writel(lower_32_bits(axi_addr), table_addr + ATR0_PCIE_WIN0_TRSL_ADDR_LSB); + writel(upper_32_bits(axi_addr), table_addr + ATR0_PCIE_WIN0_TRSL_ADDR_UDW); + + writel(TRSL_ID_AXI4_MASTER_0, table_addr + ATR0_PCIE_WIN0_TRSL_PARAM); +} + +static int mc_pcie_setup_inbound_ranges(struct platform_device *pdev, struct mc_pcie *port) +{ + struct device *dev = &pdev->dev; + struct device_node *dn = dev->of_node; + struct of_range_parser parser; + struct of_range range; + int atr_index = 0; + + /* + * MPFS PCIe root port is 32-bit only, behind a Fabric Interface + * Controller FPGA logic block which contains the AXI-S interface. + * + * From the point of view of the PCIe root port, There are only + * two supported Root Port configurations + * + * Configuration 1: for use with fully coherent designs; supports a + * window from 0x0 (CPU space) to specified PCIe space. + * + * Configuration 2: for use with non-coherent designs; supports two + * 1 Gb wide windows to CPU space; one mapping cpu space 0 to pcie + * space 0x80000000 and mapping cpu space 0x40000000 to pcie + * space 0xc0000000. This cfg needs two windows because of how + * the MSI space is allocated in the AXI-S range on MPFS. + * + * The FIC interface outside the PCIe block *must* complete the inbound + * address translation as per MCHP MPFS FPGA design guidelines. + */ + if (device_property_read_bool(dev, "dma-noncoherent")) { + /* + * Always need same two tables in this case. Need two tables + * due to hardware interactions between address and size. + */ + mc_pcie_setup_inbound_atr(0, 0, MPFS_NC_BOUNCE_ADDR, SZ_1G); + mc_pcie_setup_inbound_atr(1, SZ_1G, MPFS_NC_BOUNCE_ADDR + SZ_1G, SZ_1G); + } else { + /* Find any dma-ranges */ + if (of_pci_dma_range_parser_init(&parser, dn)) { + /* No dma-range property - setup default */ + mc_pcie_setup_inbound_atr(0, 0, 0, SZ_4G); + return 0; + } + + for_each_of_range(&parser, &range) { + if (atr_index >= MC_MAX_NUM_INBOUND_WINDOWS) { + dev_err(dev, "too many inbound ranges; %d available tables\n", + MC_MAX_NUM_INBOUND_WINDOWS); + return -EINVAL; + } + mc_pcie_setup_inbound_atr(atr_index, 0, range.pci_addr, range.size); + atr_index++; + } + } + + return 0; +} + static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, phys_addr_t axi_addr, phys_addr_t pci_addr, resource_size_t size) @@ -948,8 +1036,9 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + ATR0_AXI4_SLV0_TRSL_PARAM); - val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) | - ATR_IMPL_ENABLE; + val = ALIGN_DOWN(lower_32_bits(axi_addr), SZ_4K); + val |= FIELD_PREP(ATR_SIZE_MASK, atr_sz); + val |= ATR_IMPL_ENABLE; writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + ATR0_AXI4_SLV0_SRCADDR_PARAM); @@ -964,11 +1053,6 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index, val = upper_32_bits(pci_addr); writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) + ATR0_AXI4_SLV0_TRSL_ADDR_UDW); - - val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); - val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT); - writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM); - writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR); } static int mc_pcie_setup_windows(struct platform_device *pdev, @@ -1131,6 +1215,10 @@ static int mc_platform_init(struct pci_config_window *cfg) if (ret) return ret; + ret = mc_pcie_setup_inbound_ranges(pdev, port); + if (ret) + return ret; + /* Address translation is up; safe to enable interrupts */ ret = mc_init_interrupts(pdev, port); if (ret)