diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index b854f1bab26f..04a85d2f7e2a 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -466,6 +466,109 @@ int pci_epc_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 }
 EXPORT_SYMBOL_GPL(pci_epc_map_addr);
 
+/**
+ * pci_epc_mem_map() - allocate and map a PCI address to a CPU address
+ * @epc: the EPC device on which the CPU address is to be allocated and mapped
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @pci_addr: PCI address to which the CPU address should be mapped
+ * @pci_size: the number of bytes to map starting from @pci_addr
+ * @map: where to return the mapping information
+ *
+ * Allocate a controller memory address region and map it to a RC PCI address
+ * region, taking into account the controller physical address mapping
+ * constraints using the controller operation align_addr(). If this operation is
+ * not defined, we assume that there are no alignment constraints for the
+ * mapping.
+ *
+ * The effective size of the PCI address range mapped from @pci_addr is
+ * indicated by @map->pci_size. This size may be less than the requested
+ * @pci_size. The local virtual CPU address for the mapping is indicated by
+ * @map->virt_addr (@map->phys_addr indicates the physical address).
+ * The size and CPU address of the controller memory allocated and mapped are
+ * respectively indicated by @map->map_size and @map->virt_base (and
+ * @map->phys_base for the physical address of @map->virt_base).
+ *
+ * Returns 0 on success and a negative error code in case of error.
+ */
+int pci_epc_mem_map(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		    u64 pci_addr, size_t pci_size, struct pci_epc_map *map)
+{
+	size_t map_size = pci_size;
+	size_t map_offset = 0;
+	int ret;
+
+	if (!pci_epc_function_is_valid(epc, func_no, vfunc_no))
+		return -EINVAL;
+
+	if (!pci_size || !map)
+		return -EINVAL;
+
+	/*
+	 * Align the PCI address to map. If the controller defines the
+	 * .align_addr() operation, use it to determine the PCI address to map
+	 * and the size of the mapping. Otherwise, assume that the controller
+	 * has no alignment constraint.
+	 */
+	memset(map, 0, sizeof(*map));
+	map->pci_addr = pci_addr;
+	if (epc->ops->align_addr)
+		map->map_pci_addr =
+			epc->ops->align_addr(epc, pci_addr,
+					     &map_size, &map_offset);
+	else
+		map->map_pci_addr = pci_addr;
+	map->map_size = map_size;
+	if (map->map_pci_addr + map->map_size < pci_addr + pci_size)
+		map->pci_size = map->map_pci_addr + map->map_size - pci_addr;
+	else
+		map->pci_size = pci_size;
+
+	map->virt_base = pci_epc_mem_alloc_addr(epc, &map->phys_base,
+						map->map_size);
+	if (!map->virt_base)
+		return -ENOMEM;
+
+	map->phys_addr = map->phys_base + map_offset;
+	map->virt_addr = map->virt_base + map_offset;
+
+	ret = pci_epc_map_addr(epc, func_no, vfunc_no, map->phys_base,
+			       map->map_pci_addr, map->map_size);
+	if (ret) {
+		pci_epc_mem_free_addr(epc, map->phys_base, map->virt_base,
+				      map->map_size);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_map);
+
+/**
+ * pci_epc_mem_unmap() - unmap and free a CPU address region
+ * @epc: the EPC device on which the CPU address is allocated and mapped
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
+ * @map: the mapping information
+ *
+ * Unmap and free a CPU address region that was allocated and mapped with
+ * pci_epc_mem_map().
+ */
+void pci_epc_mem_unmap(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		       struct pci_epc_map *map)
+{
+	if (!pci_epc_function_is_valid(epc, func_no, vfunc_no))
+		return;
+
+	if (!map || !map->virt_base)
+		return;
+
+	pci_epc_unmap_addr(epc, func_no, vfunc_no, map->phys_base);
+	pci_epc_mem_free_addr(epc, map->phys_base, map->virt_base,
+			      map->map_size);
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_unmap);
+
 /**
  * pci_epc_clear_bar() - reset the BAR
  * @epc: the EPC device for which the BAR has to be cleared
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index 42ef06136bd1..f4b8dc37e447 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -32,11 +32,43 @@ pci_epc_interface_string(enum pci_epc_interface_type type)
 	}
 }
 
+/**
+ * struct pci_epc_map - information about EPC memory for mapping a RC PCI
+ *                      address range
+ * @pci_addr: start address of the RC PCI address range to map
+ * @pci_size: size of the RC PCI address range mapped from @pci_addr
+ * @map_pci_addr: RC PCI address used as the first address mapped (may be lower
+ *                than @pci_addr)
+ * @map_size: size of the controller memory needed for mapping the RC PCI address
+ *            range @pci_addr..@pci_addr+@pci_size
+ * @phys_base: base physical address of the allocated EPC memory for mapping the
+ *             RC PCI address range
+ * @phys_addr: physical address at which @pci_addr is mapped
+ * @virt_base: base virtual address of the allocated EPC memory for mapping the
+ *             RC PCI address range
+ * @virt_addr: virtual address at which @pci_addr is mapped
+ */
+struct pci_epc_map {
+	phys_addr_t	pci_addr;
+	size_t		pci_size;
+
+	phys_addr_t	map_pci_addr;
+	size_t		map_size;
+
+	phys_addr_t	phys_base;
+	phys_addr_t	phys_addr;
+	void __iomem	*virt_base;
+	void __iomem	*virt_addr;
+};
+
 /**
  * struct pci_epc_ops - set of function pointers for performing EPC operations
  * @write_header: ops to populate configuration space header
  * @set_bar: ops to configure the BAR
  * @clear_bar: ops to reset the BAR
+ * @align_addr: operation to get the mapping address, mapping size and offset
+ *		into a controller memory window needed to map an RC PCI address
+ *		region
  * @map_addr: ops to map CPU address to PCI address
  * @unmap_addr: ops to unmap CPU address and PCI address
  * @set_msi: ops to set the requested number of MSI interrupts in the MSI
@@ -61,6 +93,8 @@ struct pci_epc_ops {
 			   struct pci_epf_bar *epf_bar);
 	void	(*clear_bar)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			     struct pci_epf_bar *epf_bar);
+	phys_addr_t (*align_addr)(struct pci_epc *epc, phys_addr_t pci_addr,
+				  size_t *size, size_t *offset);
 	int	(*map_addr)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			    phys_addr_t addr, u64 pci_addr, size_t size);
 	void	(*unmap_addr)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
@@ -278,6 +312,10 @@ void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
 				     phys_addr_t *phys_addr, size_t size);
 void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
 			   void __iomem *virt_addr, size_t size);
+int pci_epc_mem_map(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		    u64 pci_addr, size_t pci_size, struct pci_epc_map *map);
+void pci_epc_mem_unmap(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		       struct pci_epc_map *map);
 
 #else
 static inline void pci_epc_init_notify(struct pci_epc *epc)
