diff mbox series

[v3,21/25] PCI: cpqphp: Use RESPONSE_IS_PCI_ERROR() to check read from hardware

Message ID 20dd8fb823cdb1df4a6313fd5872d78d8f0860c0.1634825082.git.naveennaidu479@gmail.com (mailing list archive)
State Superseded
Delegated to: Bjorn Helgaas
Headers show
Series Unify PCI error response checking | expand

Commit Message

Naveen Naidu Oct. 21, 2021, 3:07 p.m. UTC 
An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error.  There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use RESPONSE_IS_PCI_ERROR() to check the response we get when we read
data from hardware.

This helps unify PCI error response checking and make error checks
consistent and easier to find.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
 drivers/pci/hotplug/cpqphp_ctrl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 1b26ca0b3701..bf14391c005f 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -2273,7 +2273,7 @@  static u32 configure_new_device(struct controller  *ctrl, struct pci_func  *func
 		while ((function < max_functions) && (!stop_it)) {
 			pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
 
-			if (ID == 0xFFFFFFFF) {
+			if (RESPONSE_IS_PCI_ERROR(ID)) {
 				function++;
 			} else {
 				/* Setup slot structure. */
@@ -2517,7 +2517,7 @@  static int configure_new_function(struct controller *ctrl, struct pci_func *func
 			pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0), 0x00, &ID);
 			pci_bus->number = func->bus;
 
-			if (ID != 0xFFFFFFFF) {	  /*  device present */
+			if (!RESPONSE_IS_PCI_ERROR(ID)) {	  /*  device present */
 				/* Setup slot structure. */
 				new_slot = cpqhp_slot_create(hold_bus_node->base);