diff mbox

[Alternative,2] ACPI / PCI: Set root bridge ACPI handle in advance

Message ID 2695660.jbNleTYArh@vostro.rjw.lan (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Rafael Wysocki Jan. 3, 2013, 12:11 p.m. UTC
On Thursday, January 03, 2013 01:40:52 AM Rafael J. Wysocki wrote:
> On Wednesday, January 02, 2013 04:07:32 PM Bjorn Helgaas wrote:
> > On Thu, Dec 27, 2012 at 10:32:13PM +0100, Rafael J. Wysocki wrote:
> > > To that end, split pci_create_root_bus() into two functions,
> > > pci_alloc_root() and pci_add_root(), that will allocate memory for
> > > the new PCI bus and bridge representations and register them with
> > > the driver core, respectively, and that may be called directly by
> > > the architectures that need to set the root bridge's ACPI handle
> > > before registering it.
> > 
> > I'm trying to *reduce* the interfaces for creating and scanning PCI
> > host bridges, and this is a step in the opposite direction.
> 
> Yes it is.
> 
> The alternative is to make the root bridge initialization code more complex.

Well, maybe not so much.

What about adding an extra arg to pci_create_root_bus(), ie. the patch below
(changelog skipped for now)?

I admit that having two void * args there is a little awkward, but at least
it's totally generic.

> > > Next, Make both x86 and ia64 (the only architectures using ACPI at
> > > the moment) call pci_alloc_root(), set the root bridge's ACPI handle
> > > and then call pci_add_root() in their pci_acpi_scan_root() routines
> > > instead of calling pci_create_root_bus().  For the other code paths
> > > adding PCI root bridges define a new pci_create_root_bus() as a
> > > simple combination of pci_alloc_root() and pci_add_root().
> > 
> > pci_create_root_bus() takes a "struct device *parent" argument.  That
> > seems like a logical place to tell the PCI core about the host bridge
> > device, but x86 and ia64 currently pass NULL there.
> 
> And there's a reason for that.  Namely, on these architectures PCI host
> bridges have no physical parents (well, at least in current practice).
> 
> > The patch below shows what I'm thinking.  It does have the side-effect
> > of changing the sysfs topology from this:
> > 
> >     /sys/devices/pci0000:00
> >     /sys/devices/pci0000:00/0000:00:00.0
> > 
> > to this:
> > 
> >     /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/pci0000:00
> >     /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/pci0000:00/0000:00:00.0
> > 
> > because it puts the PCI root bus (pci0000:00) under the PNP0A08 device
> > rather than at the top level.
> 
> Which is wrong.
> 
> PNP0A08 is not a parent of the host bridge, but its ACPI "companion" (ie. ACPI
> namespace node representing the host bridge itself).
> 
> > That seems like an improvement to me, but it *is* different.
> 
> Well, then we should make every ACPI device node corresponding to a PCI device
> be a parent of that device's struct pci_dev and so on for other bus types.  It
> doesn't sound like an attractive idea. :-)  Moreover, it is impossible, because
> those things generally already have parents (struct pci_dev objects have them
> at least).
> 
> That said the idea to pass something meaningful in the parent argument
> of pci_create_root_bus() can be implemented if we create a "physical" device
> object corresponding to "device:00" (which is an ACPI namespace node) in your
> example.
> 
> From what I can tell, "device:00" always corresponds to the ACPI _SB scope
> (which is mandatory), so in principle we can create an abstract "physical"
> device object for it and call it something like "system_root".  Then, if we
> use it as the parent of pci0000:00 (the host bridge), then we'll have
> 
>      /sys/devices/system_root/pci0000:00
>      /sys/devices/system_root/pci0000:00/0000:00:00.0

Having considered that a little more I don't really think it's a good idea.
It still would be going a little backwards, because we'd need to use the parent
to get an ACPI handle known already beforehand.

Please tell me what you think of the one below.

Thanks,
Rafael


Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 arch/ia64/pci/pci.c              |    8 +++++++-
 arch/powerpc/kernel/pci-common.c |    2 +-
 arch/s390/pci/pci.c              |    2 +-
 arch/sparc/kernel/pci.c          |    2 +-
 arch/x86/pci/acpi.c              |    9 ++++++++-
 drivers/acpi/pci_root.c          |   18 ------------------
 drivers/pci/pci-acpi.c           |   19 -------------------
 drivers/pci/probe.c              |   23 +++++++++++++++++++----
 include/acpi/acpi_bus.h          |    1 -
 include/linux/pci.h              |    6 ++++--
 10 files changed, 41 insertions(+), 49 deletions(-)

Comments

Rafael Wysocki Jan. 3, 2013, 9:23 p.m. UTC | #1
On Thursday, January 03, 2013 01:11:30 PM Rafael J. Wysocki wrote:
> On Thursday, January 03, 2013 01:40:52 AM Rafael J. Wysocki wrote:
> > On Wednesday, January 02, 2013 04:07:32 PM Bjorn Helgaas wrote:
> > > On Thu, Dec 27, 2012 at 10:32:13PM +0100, Rafael J. Wysocki wrote:
> > > > To that end, split pci_create_root_bus() into two functions,
> > > > pci_alloc_root() and pci_add_root(), that will allocate memory for
> > > > the new PCI bus and bridge representations and register them with
> > > > the driver core, respectively, and that may be called directly by
> > > > the architectures that need to set the root bridge's ACPI handle
> > > > before registering it.
> > > 
> > > I'm trying to *reduce* the interfaces for creating and scanning PCI
> > > host bridges, and this is a step in the opposite direction.
> > 
> > Yes it is.
> > 
> > The alternative is to make the root bridge initialization code more complex.
> 
> Well, maybe not so much.
> 
> What about adding an extra arg to pci_create_root_bus(), ie. the patch below
> (changelog skipped for now)?
> 
> I admit that having two void * args there is a little awkward, but at least
> it's totally generic.
> 
> > > > Next, Make both x86 and ia64 (the only architectures using ACPI at
> > > > the moment) call pci_alloc_root(), set the root bridge's ACPI handle
> > > > and then call pci_add_root() in their pci_acpi_scan_root() routines
> > > > instead of calling pci_create_root_bus().  For the other code paths
> > > > adding PCI root bridges define a new pci_create_root_bus() as a
> > > > simple combination of pci_alloc_root() and pci_add_root().
> > > 
> > > pci_create_root_bus() takes a "struct device *parent" argument.  That
> > > seems like a logical place to tell the PCI core about the host bridge
> > > device, but x86 and ia64 currently pass NULL there.
> > 
> > And there's a reason for that.  Namely, on these architectures PCI host
> > bridges have no physical parents (well, at least in current practice).
> > 
> > > The patch below shows what I'm thinking.  It does have the side-effect
> > > of changing the sysfs topology from this:
> > > 
> > >     /sys/devices/pci0000:00
> > >     /sys/devices/pci0000:00/0000:00:00.0
> > > 
> > > to this:
> > > 
> > >     /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/pci0000:00
> > >     /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/pci0000:00/0000:00:00.0
> > > 
> > > because it puts the PCI root bus (pci0000:00) under the PNP0A08 device
> > > rather than at the top level.
> > 
> > Which is wrong.
> > 
> > PNP0A08 is not a parent of the host bridge, but its ACPI "companion" (ie. ACPI
> > namespace node representing the host bridge itself).
> > 
> > > That seems like an improvement to me, but it *is* different.
> > 
> > Well, then we should make every ACPI device node corresponding to a PCI device
> > be a parent of that device's struct pci_dev and so on for other bus types.  It
> > doesn't sound like an attractive idea. :-)  Moreover, it is impossible, because
> > those things generally already have parents (struct pci_dev objects have them
> > at least).
> > 
> > That said the idea to pass something meaningful in the parent argument
> > of pci_create_root_bus() can be implemented if we create a "physical" device
> > object corresponding to "device:00" (which is an ACPI namespace node) in your
> > example.
> > 
> > From what I can tell, "device:00" always corresponds to the ACPI _SB scope
> > (which is mandatory), so in principle we can create an abstract "physical"
> > device object for it and call it something like "system_root".  Then, if we
> > use it as the parent of pci0000:00 (the host bridge), then we'll have
> > 
> >      /sys/devices/system_root/pci0000:00
> >      /sys/devices/system_root/pci0000:00/0000:00:00.0
> 
> Having considered that a little more I don't really think it's a good idea.
> It still would be going a little backwards, because we'd need to use the parent
> to get an ACPI handle known already beforehand.

One more thing.

The sysfs locations of PCI devices shouldn't change if acpi=off is passed to
the kernel, so the above is not a good idea at all, I'm afraid.

Thanks,
Rafael
Bjorn Helgaas Jan. 3, 2013, 10:13 p.m. UTC | #2
On Thu, Jan 3, 2013 at 2:23 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Thursday, January 03, 2013 01:11:30 PM Rafael J. Wysocki wrote:
>> On Thursday, January 03, 2013 01:40:52 AM Rafael J. Wysocki wrote:
>> > On Wednesday, January 02, 2013 04:07:32 PM Bjorn Helgaas wrote:
>> > > On Thu, Dec 27, 2012 at 10:32:13PM +0100, Rafael J. Wysocki wrote:
>> > > > To that end, split pci_create_root_bus() into two functions,
>> > > > pci_alloc_root() and pci_add_root(), that will allocate memory for
>> > > > the new PCI bus and bridge representations and register them with
>> > > > the driver core, respectively, and that may be called directly by
>> > > > the architectures that need to set the root bridge's ACPI handle
>> > > > before registering it.
>> > >
>> > > I'm trying to *reduce* the interfaces for creating and scanning PCI
>> > > host bridges, and this is a step in the opposite direction.
>> >
>> > Yes it is.
>> >
>> > The alternative is to make the root bridge initialization code more complex.
>>
>> Well, maybe not so much.
>>
>> What about adding an extra arg to pci_create_root_bus(), ie. the patch below
>> (changelog skipped for now)?
>>
>> I admit that having two void * args there is a little awkward, but at least
>> it's totally generic.
>>
>> > > > Next, Make both x86 and ia64 (the only architectures using ACPI at
>> > > > the moment) call pci_alloc_root(), set the root bridge's ACPI handle
>> > > > and then call pci_add_root() in their pci_acpi_scan_root() routines
>> > > > instead of calling pci_create_root_bus().  For the other code paths
>> > > > adding PCI root bridges define a new pci_create_root_bus() as a
>> > > > simple combination of pci_alloc_root() and pci_add_root().
>> > >
>> > > pci_create_root_bus() takes a "struct device *parent" argument.  That
>> > > seems like a logical place to tell the PCI core about the host bridge
>> > > device, but x86 and ia64 currently pass NULL there.
>> >
>> > And there's a reason for that.  Namely, on these architectures PCI host
>> > bridges have no physical parents (well, at least in current practice).
>> >
>> > > The patch below shows what I'm thinking.  It does have the side-effect
>> > > of changing the sysfs topology from this:
>> > >
>> > >     /sys/devices/pci0000:00
>> > >     /sys/devices/pci0000:00/0000:00:00.0
>> > >
>> > > to this:
>> > >
>> > >     /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/pci0000:00
>> > >     /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/pci0000:00/0000:00:00.0
>> > >
>> > > because it puts the PCI root bus (pci0000:00) under the PNP0A08 device
>> > > rather than at the top level.
>> >
>> > Which is wrong.
>> >
>> > PNP0A08 is not a parent of the host bridge, but its ACPI "companion" (ie. ACPI
>> > namespace node representing the host bridge itself).
>> >
>> > > That seems like an improvement to me, but it *is* different.
>> >
>> > Well, then we should make every ACPI device node corresponding to a PCI device
>> > be a parent of that device's struct pci_dev and so on for other bus types.  It
>> > doesn't sound like an attractive idea. :-)  Moreover, it is impossible, because
>> > those things generally already have parents (struct pci_dev objects have them
>> > at least).
>> >
>> > That said the idea to pass something meaningful in the parent argument
>> > of pci_create_root_bus() can be implemented if we create a "physical" device
>> > object corresponding to "device:00" (which is an ACPI namespace node) in your
>> > example.
>> >
>> > From what I can tell, "device:00" always corresponds to the ACPI _SB scope
>> > (which is mandatory), so in principle we can create an abstract "physical"
>> > device object for it and call it something like "system_root".  Then, if we
>> > use it as the parent of pci0000:00 (the host bridge), then we'll have
>> >
>> >      /sys/devices/system_root/pci0000:00
>> >      /sys/devices/system_root/pci0000:00/0000:00:00.0
>>
>> Having considered that a little more I don't really think it's a good idea.
>> It still would be going a little backwards, because we'd need to use the parent
>> to get an ACPI handle known already beforehand.
>
> One more thing.
>
> The sysfs locations of PCI devices shouldn't change if acpi=off is passed to
> the kernel, so the above is not a good idea at all, I'm afraid.

I don't think there's a requirement that sysfs with acpi=off be the
same as with it on.  acpi=off is only a debugging tool.  With acpi=off
we ignore all the topology information we get from ACPI, and the
location of PCI host bridges is part of that topology.  We shouldn't
cripple sysfs when we're using ACPI just so it matches the acpi=off
case.

Of course, we might not want to change this in sysfs anyway; I just
don't think acpi=off is a valid reason to avoid a change.

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rafael Wysocki Jan. 3, 2013, 10:56 p.m. UTC | #3
On Thursday, January 03, 2013 03:13:31 PM Bjorn Helgaas wrote:
> On Thu, Jan 3, 2013 at 2:23 PM, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> > On Thursday, January 03, 2013 01:11:30 PM Rafael J. Wysocki wrote:
> >> On Thursday, January 03, 2013 01:40:52 AM Rafael J. Wysocki wrote:
> >> > On Wednesday, January 02, 2013 04:07:32 PM Bjorn Helgaas wrote:
> >> > > On Thu, Dec 27, 2012 at 10:32:13PM +0100, Rafael J. Wysocki wrote:
> >> > > > To that end, split pci_create_root_bus() into two functions,
> >> > > > pci_alloc_root() and pci_add_root(), that will allocate memory for
> >> > > > the new PCI bus and bridge representations and register them with
> >> > > > the driver core, respectively, and that may be called directly by
> >> > > > the architectures that need to set the root bridge's ACPI handle
> >> > > > before registering it.
> >> > >
> >> > > I'm trying to *reduce* the interfaces for creating and scanning PCI
> >> > > host bridges, and this is a step in the opposite direction.
> >> >
> >> > Yes it is.
> >> >
> >> > The alternative is to make the root bridge initialization code more complex.
> >>
> >> Well, maybe not so much.
> >>
> >> What about adding an extra arg to pci_create_root_bus(), ie. the patch below
> >> (changelog skipped for now)?
> >>
> >> I admit that having two void * args there is a little awkward, but at least
> >> it's totally generic.
> >>
> >> > > > Next, Make both x86 and ia64 (the only architectures using ACPI at
> >> > > > the moment) call pci_alloc_root(), set the root bridge's ACPI handle
> >> > > > and then call pci_add_root() in their pci_acpi_scan_root() routines
> >> > > > instead of calling pci_create_root_bus().  For the other code paths
> >> > > > adding PCI root bridges define a new pci_create_root_bus() as a
> >> > > > simple combination of pci_alloc_root() and pci_add_root().
> >> > >
> >> > > pci_create_root_bus() takes a "struct device *parent" argument.  That
> >> > > seems like a logical place to tell the PCI core about the host bridge
> >> > > device, but x86 and ia64 currently pass NULL there.
> >> >
> >> > And there's a reason for that.  Namely, on these architectures PCI host
> >> > bridges have no physical parents (well, at least in current practice).
> >> >
> >> > > The patch below shows what I'm thinking.  It does have the side-effect
> >> > > of changing the sysfs topology from this:
> >> > >
> >> > >     /sys/devices/pci0000:00
> >> > >     /sys/devices/pci0000:00/0000:00:00.0
> >> > >
> >> > > to this:
> >> > >
> >> > >     /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/pci0000:00
> >> > >     /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/pci0000:00/0000:00:00.0
> >> > >
> >> > > because it puts the PCI root bus (pci0000:00) under the PNP0A08 device
> >> > > rather than at the top level.
> >> >
> >> > Which is wrong.
> >> >
> >> > PNP0A08 is not a parent of the host bridge, but its ACPI "companion" (ie. ACPI
> >> > namespace node representing the host bridge itself).
> >> >
> >> > > That seems like an improvement to me, but it *is* different.
> >> >
> >> > Well, then we should make every ACPI device node corresponding to a PCI device
> >> > be a parent of that device's struct pci_dev and so on for other bus types.  It
> >> > doesn't sound like an attractive idea. :-)  Moreover, it is impossible, because
> >> > those things generally already have parents (struct pci_dev objects have them
> >> > at least).
> >> >
> >> > That said the idea to pass something meaningful in the parent argument
> >> > of pci_create_root_bus() can be implemented if we create a "physical" device
> >> > object corresponding to "device:00" (which is an ACPI namespace node) in your
> >> > example.
> >> >
> >> > From what I can tell, "device:00" always corresponds to the ACPI _SB scope
> >> > (which is mandatory), so in principle we can create an abstract "physical"
> >> > device object for it and call it something like "system_root".  Then, if we
> >> > use it as the parent of pci0000:00 (the host bridge), then we'll have
> >> >
> >> >      /sys/devices/system_root/pci0000:00
> >> >      /sys/devices/system_root/pci0000:00/0000:00:00.0
> >>
> >> Having considered that a little more I don't really think it's a good idea.
> >> It still would be going a little backwards, because we'd need to use the parent
> >> to get an ACPI handle known already beforehand.
> >
> > One more thing.
> >
> > The sysfs locations of PCI devices shouldn't change if acpi=off is passed to
> > the kernel, so the above is not a good idea at all, I'm afraid.
> 
> I don't think there's a requirement that sysfs with acpi=off be the
> same as with it on.  acpi=off is only a debugging tool.  With acpi=off
> we ignore all the topology information we get from ACPI, and the
> location of PCI host bridges is part of that topology.  We shouldn't
> cripple sysfs when we're using ACPI just so it matches the acpi=off
> case.
> 
> Of course, we might not want to change this in sysfs anyway; I just
> don't think acpi=off is a valid reason to avoid a change.

Well, I don't think we'll agree on that one, sorry.

OK, I now have sent no less than three working version of the patch that fixes
the current code which _is_ insane.  You haven't even responded to the last
one, but for the first two the reason why you didn't like them was something
similar to "it may conflict with some future changes I'm planning".  Well,
that might be used to reject prety much any change and I'm not considering it
as a good enough reason for blocking a fix.  Sorry about that.

I easily could say I didn't care, but I feel I've spent too much time on that
pretty much for no reason.

Please tell me, honestly, do you want the current code to be fixed at all?

Disappointed,
Rafael
diff mbox

Patch

Index: linux/drivers/pci/probe.c
===================================================================
--- linux.orig/drivers/pci/probe.c
+++ linux/drivers/pci/probe.c
@@ -1632,8 +1632,22 @@  unsigned int pci_scan_child_bus(struct p
 	return max;
 }
 
+/**
+ * pcibios_root_bridge_setup - Platform-specific host bridge setup.
+ * @bridge: Host bridge to set up.
+ * @rootdata: Additional data to use for the host bridge setup.
+ *
+ * Default empty implementation.  Replace with an architecture-specific setup
+ * routine, if necessary.
+ */
+void __weak pcibios_root_bridge_setup(struct pci_host_bridge *bridge,
+				      void *rootdata)
+{
+}
+
 struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
-		struct pci_ops *ops, void *sysdata, struct list_head *resources)
+				    struct pci_ops *ops, void *sysdata,
+				    struct list_head *resources, void *rootdata)
 {
 	int error;
 	struct pci_host_bridge *bridge;
@@ -1665,6 +1679,7 @@  struct pci_bus *pci_create_root_bus(stru
 	bridge->dev.parent = parent;
 	bridge->dev.release = pci_release_bus_bridge_dev;
 	dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(b), bus);
+	pcibios_root_bridge_setup(bridge, rootdata);
 	error = device_register(&bridge->dev);
 	if (error)
 		goto bridge_dev_reg_err;
@@ -1807,7 +1822,7 @@  struct pci_bus *pci_scan_root_bus(struct
 			break;
 		}
 
-	b = pci_create_root_bus(parent, bus, ops, sysdata, resources);
+	b = pci_create_root_bus(parent, bus, ops, sysdata, resources, NULL);
 	if (!b)
 		return NULL;
 
@@ -1838,7 +1853,7 @@  struct pci_bus *pci_scan_bus_parented(st
 	pci_add_resource(&resources, &ioport_resource);
 	pci_add_resource(&resources, &iomem_resource);
 	pci_add_resource(&resources, &busn_resource);
-	b = pci_create_root_bus(parent, bus, ops, sysdata, &resources);
+	b = pci_create_root_bus(parent, bus, ops, sysdata, &resources, NULL);
 	if (b)
 		pci_scan_child_bus(b);
 	else
@@ -1856,7 +1871,7 @@  struct pci_bus *pci_scan_bus(int bus, st
 	pci_add_resource(&resources, &ioport_resource);
 	pci_add_resource(&resources, &iomem_resource);
 	pci_add_resource(&resources, &busn_resource);
-	b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources);
+	b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources, NULL);
 	if (b) {
 		pci_scan_child_bus(b);
 		pci_bus_add_devices(b);
Index: linux/include/linux/pci.h
===================================================================
--- linux.orig/include/linux/pci.h
+++ linux/include/linux/pci.h
@@ -378,6 +378,8 @@  void pci_set_host_bridge_release(struct
 		     void (*release_fn)(struct pci_host_bridge *),
 		     void *release_data);
 
+void pcibios_root_bridge_setup(struct pci_host_bridge *bridge, void *rootdata);
+
 /*
  * The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond
  * to P2P or CardBus bridge windows) go in a table.  Additional ones (for
@@ -701,8 +703,8 @@  struct pci_bus *pci_scan_bus_parented(st
 				      struct pci_ops *ops, void *sysdata);
 struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, void *sysdata);
 struct pci_bus *pci_create_root_bus(struct device *parent, int bus,
-				    struct pci_ops *ops, void *sysdata,
-				    struct list_head *resources);
+				struct pci_ops *ops, void *sysdata,
+				struct list_head *resources, void *rootdata);
 int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax);
 int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax);
 void pci_bus_release_busn_res(struct pci_bus *b);
Index: linux/arch/x86/pci/acpi.c
===================================================================
--- linux.orig/arch/x86/pci/acpi.c
+++ linux/arch/x86/pci/acpi.c
@@ -553,7 +553,8 @@  struct pci_bus * __devinit pci_acpi_scan
 		if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
 				    (u8)root->secondary.end, root->mcfg_addr))
 			bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
-						  sd, &resources);
+						  sd, &resources,
+						  device->handle);
 
 		if (bus) {
 			pci_scan_child_bus(bus);
@@ -593,6 +594,12 @@  struct pci_bus * __devinit pci_acpi_scan
 	return bus;
 }
 
+void pcibios_root_bridge_setup(struct pci_host_bridge *bridge, void *rootdata)
+{
+	if (rootdata)
+		ACPI_HANDLE_SET(&bridge->dev, (acpi_handle)rootdata);
+}
+
 int __init pci_acpi_init(void)
 {
 	struct pci_dev *dev = NULL;
Index: linux/arch/ia64/pci/pci.c
===================================================================
--- linux.orig/arch/ia64/pci/pci.c
+++ linux/arch/ia64/pci/pci.c
@@ -379,7 +379,7 @@  pci_acpi_scan_root(struct acpi_pci_root
 	 * such quirk. So we just ignore the case now.
 	 */
 	pbus = pci_create_root_bus(NULL, bus, &pci_root_ops, controller,
-				   &info.resources);
+				   &info.resources, controller->acpi_handle);
 	if (!pbus) {
 		pci_free_resource_list(&info.resources);
 		return NULL;
@@ -396,6 +396,12 @@  out1:
 	return NULL;
 }
 
+void pcibios_root_bridge_setup(struct pci_host_bridge *bridge, void *rootdata)
+{
+	if (rootdata)
+		ACPI_HANDLE_SET(&bridge->dev, (acpi_handle)rootdata);
+}
+
 static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
 {
 	unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
Index: linux/drivers/pci/pci-acpi.c
===================================================================
--- linux.orig/drivers/pci/pci-acpi.c
+++ linux/drivers/pci/pci-acpi.c
@@ -302,24 +302,6 @@  static int acpi_pci_find_device(struct d
 	return 0;
 }
 
-static int acpi_pci_find_root_bridge(struct device *dev, acpi_handle *handle)
-{
-	int num;
-	unsigned int seg, bus;
-
-	/*
-	 * The string should be the same as root bridge's name
-	 * Please look at 'pci_scan_bus_parented'
-	 */
-	num = sscanf(dev_name(dev), "pci%04x:%02x", &seg, &bus);
-	if (num != 2)
-		return -ENODEV;
-	*handle = acpi_get_pci_rootbridge_handle(seg, bus);
-	if (!*handle)
-		return -ENODEV;
-	return 0;
-}
-
 static void pci_acpi_setup(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -378,7 +360,6 @@  static void pci_acpi_cleanup(struct devi
 static struct acpi_bus_type acpi_pci_bus = {
 	.bus = &pci_bus_type,
 	.find_device = acpi_pci_find_device,
-	.find_bridge = acpi_pci_find_root_bridge,
 	.setup = pci_acpi_setup,
 	.cleanup = pci_acpi_cleanup,
 };
Index: linux/drivers/acpi/pci_root.c
===================================================================
--- linux.orig/drivers/acpi/pci_root.c
+++ linux/drivers/acpi/pci_root.c
@@ -107,24 +107,6 @@  void acpi_pci_unregister_driver(struct a
 }
 EXPORT_SYMBOL(acpi_pci_unregister_driver);
 
-acpi_handle acpi_get_pci_rootbridge_handle(unsigned int seg, unsigned int bus)
-{
-	struct acpi_pci_root *root;
-	acpi_handle handle = NULL;
-	
-	mutex_lock(&acpi_pci_root_lock);
-	list_for_each_entry(root, &acpi_pci_roots, node)
-		if ((root->segment == (u16) seg) &&
-		    (root->secondary.start == (u16) bus)) {
-			handle = root->device->handle;
-			break;
-		}
-	mutex_unlock(&acpi_pci_root_lock);
-	return handle;
-}
-
-EXPORT_SYMBOL_GPL(acpi_get_pci_rootbridge_handle);
-
 /**
  * acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
  * @handle - the ACPI CA node in question.
Index: linux/include/acpi/acpi_bus.h
===================================================================
--- linux.orig/include/acpi/acpi_bus.h
+++ linux/include/acpi/acpi_bus.h
@@ -402,7 +402,6 @@  struct acpi_pci_root {
 /* helper */
 acpi_handle acpi_get_child(acpi_handle, u64);
 int acpi_is_root_bridge(acpi_handle);
-acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
 struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
 #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)ACPI_HANDLE(dev))
 
Index: linux/arch/powerpc/kernel/pci-common.c
===================================================================
--- linux.orig/arch/powerpc/kernel/pci-common.c
+++ linux/arch/powerpc/kernel/pci-common.c
@@ -1661,7 +1661,7 @@  void __devinit pcibios_scan_phb(struct p
 
 	/* Create an empty bus for the toplevel */
 	bus = pci_create_root_bus(hose->parent, hose->first_busno,
-				  hose->ops, hose, &resources);
+				  hose->ops, hose, &resources, NULL);
 	if (bus == NULL) {
 		pr_err("Failed to create bus for PCI domain %04x\n",
 			hose->global_number);
Index: linux/arch/s390/pci/pci.c
===================================================================
--- linux.orig/arch/s390/pci/pci.c
+++ linux/arch/s390/pci/pci.c
@@ -940,7 +940,7 @@  static int zpci_create_device_bus(struct
 	}
 
 	zdev->bus = pci_create_root_bus(NULL, ZPCI_BUS_NR, &pci_root_ops,
-					zdev, &resources);
+					zdev, &resources, NULL);
 	if (!zdev->bus)
 		return -EIO;
 
Index: linux/arch/sparc/kernel/pci.c
===================================================================
--- linux.orig/arch/sparc/kernel/pci.c
+++ linux/arch/sparc/kernel/pci.c
@@ -603,7 +603,7 @@  struct pci_bus * __devinit pci_scan_one_
 	pbm->busn.flags	= IORESOURCE_BUS;
 	pci_add_resource(&resources, &pbm->busn);
 	bus = pci_create_root_bus(parent, pbm->pci_first_busno, pbm->pci_ops,
-				  pbm, &resources);
+				  pbm, &resources, NULL);
 	if (!bus) {
 		printk(KERN_ERR "Failed to create bus for %s\n",
 		       node->full_name);