diff mbox

x86/pci: intel bus root res with IOH reading -v2

Message ID 4AC97C00.7090503@kernel.org
State Accepted, archived
Headers show

Commit Message

Yinghai Lu Oct. 5, 2009, 4:54 a.m. UTC
None
diff mbox

Patch

Index: linux-2.6/arch/x86/pci/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/pci/Makefile
+++ linux-2.6/arch/x86/pci/Makefile
@@ -15,3 +15,4 @@  obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
 obj-y				+= common.o early.o
 obj-y				+= amd_bus.o
+obj-$(CONFIG_X86_64)		+= intel_bus.o
Index: linux-2.6/arch/x86/pci/intel_bus.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/pci/intel_bus.c
@@ -0,0 +1,90 @@ 
+/*
+ * to read io range from IOH pci conf, need to do it after mmconfig is there
+ */
+
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <asm/pci_x86.h>
+
+#include "bus_numa.h"
+
+static inline void print_ioh_resources(struct pci_root_info *info)
+{
+	int res_num;
+	int busnum;
+	int i;
+
+	printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n",
+			info->bus_min, info->bus_max);
+	res_num = info->res_num;
+	busnum = info->bus_min;
+	for (i = 0; i < res_num; i++) {
+		struct resource *res;
+
+		res = &info->res[i];
+		printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n",
+			busnum, i,
+			(res->flags & IORESOURCE_IO) ? "io port" :
+							"mmio",
+			res->start, res->end);
+	}
+}
+
+#define IOH_LIO			0x108
+#define IOH_LMMIOL		0x10c
+#define IOH_LMMIOH		0x110
+#define IOH_LMMIOH_BASEU	0x114
+#define IOH_LMMIOH_LIMITU	0x118
+#define IOH_LCFGBUS		0x11c
+
+static void __devinit pci_root_bus_res(struct pci_dev *dev)
+{
+	u16 word;
+	u32 dword;
+	struct pci_root_info *info;
+	u16 io_base, io_end;
+	u32 mmiol_base, mmiol_end;
+	u64 mmioh_base, mmioh_end;
+	int bus_base, bus_end;
+
+	if (pci_root_num >= PCI_ROOT_NR) {
+		printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n");
+		return;
+	}
+
+	info = &pci_root_info[pci_root_num];
+	pci_root_num++;
+
+	pci_read_config_word(dev, IOH_LCFGBUS, &word);
+	bus_base = (word & 0xff);
+	bus_end = (word & 0xff00) >> 8;
+	sprintf(info->name, "PCI Bus #%02x", bus_base);
+	info->bus_min = bus_base;
+	info->bus_max = bus_end;
+
+	pci_read_config_word(dev, IOH_LIO, &word);
+	io_base = (word & 0xf0) << (12 - 4);
+	io_end = (word & 0xf000) | 0xfff;
+	update_res(info, io_base, io_end, IORESOURCE_IO, 0);
+
+	pci_read_config_dword(dev, IOH_LMMIOL, &dword);
+	mmiol_base = (dword & 0xff00) << (24 - 8);
+	mmiol_end = (dword & 0xff000000) | 0xffffff;
+	update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0);
+
+	pci_read_config_dword(dev, IOH_LMMIOH, &dword);
+	mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10);
+	mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff);
+	pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword);
+	mmioh_base |= ((u64)(dword & 0x7ffff)) << 32;
+	pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword);
+	mmioh_end |= ((u64)(dword & 0x7ffff)) << 32;
+	update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0);
+
+	print_ioh_resources(info);
+}
+
+/* intel IOH */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res);
Index: linux-2.6/arch/x86/pci/amd_bus.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/amd_bus.c
+++ linux-2.6/arch/x86/pci/amd_bus.c
@@ -10,6 +10,8 @@ 
 #include <linux/cpumask.h>
 #endif
 
+#include "bus_numa.h"
+
 /*
  * This discovers the pcibus <-> node mapping on AMD K8.
  * also get peer root bus resource for io,mmio
@@ -17,25 +19,9 @@ 
 
 #ifdef CONFIG_X86_64
 
-/*
- * sub bus (transparent) will use entres from 3 to store extra from root,
- * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES?
- */
-#define RES_NUM 16
-struct pci_root_info {
-	char name[12];
-	unsigned int res_num;
-	struct resource res[RES_NUM];
-	int bus_min;
-	int bus_max;
-	int node;
-	int link;
-};
-
-/* 4 at this time, it may become to 32 */
-#define PCI_ROOT_NR 4
-static int pci_root_num;
-static struct pci_root_info pci_root_info[PCI_ROOT_NR];
+int pci_root_num;
+struct pci_root_info pci_root_info[PCI_ROOT_NR];
+static int found_all_numa_early;
 
 void x86_pci_root_bus_res_quirks(struct pci_bus *b)
 {
@@ -48,8 +34,11 @@  void x86_pci_root_bus_res_quirks(struct
 	    b->resource[1] != &iomem_resource)
 		return;
 
-	/* if only one root bus, don't need to anything */
-	if (pci_root_num < 2)
+	if (!pci_root_num)
+		return;
+
+	/* for amd, if only one root bus, don't need to do anything */
+	if (pci_root_num < 2 && found_all_numa_early)
 		return;
 
 	for (i = 0; i < pci_root_num; i++) {
@@ -130,12 +119,15 @@  static void __init update_range(struct r
 	}
 }
 
-static void __init update_res(struct pci_root_info *info, size_t start,
+void __init update_res(struct pci_root_info *info, size_t start,
 			      size_t end, unsigned long flags, int merge)
 {
 	int i;
 	struct resource *res;
 
+	if (start > end)
+		return;
+
 	if (!merge)
 		goto addit;
 
@@ -230,7 +222,6 @@  static int __init early_fill_mp_bus_info
 	int j;
 	unsigned uninitialized_var(bus);
 	unsigned uninitialized_var(slot);
-	int found;
 	int node;
 	int link;
 	int def_node;
@@ -247,7 +238,7 @@  static int __init early_fill_mp_bus_info
 	if (!early_pci_allowed())
 		return -1;
 
-	found = 0;
+	found_all_numa_early = 0;
 	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
 		u32 id;
 		u16 device;
@@ -261,12 +252,12 @@  static int __init early_fill_mp_bus_info
 		device = (id>>16) & 0xffff;
 		if (pci_probes[i].vendor == vendor &&
 		    pci_probes[i].device == device) {
-			found = 1;
+			found_all_numa_early = 1;
 			break;
 		}
 	}
 
-	if (!found)
+	if (!found_all_numa_early)
 		return 0;
 
 	pci_root_num = 0;
@@ -490,7 +481,7 @@  static int __init early_fill_mp_bus_info
 		info = &pci_root_info[i];
 		res_num = info->res_num;
 		busnum = info->bus_min;
-		printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n",
+		printk(KERN_DEBUG "bus: [%02x, %02x] on node %x link %x\n",
 		       info->bus_min, info->bus_max, info->node, info->link);
 		for (j = 0; j < res_num; j++) {
 			res = &info->res[j];
Index: linux-2.6/arch/x86/pci/bus_numa.h
===================================================================
--- /dev/null
+++ linux-2.6/arch/x86/pci/bus_numa.h
@@ -0,0 +1,26 @@ 
+#ifdef CONFIG_X86_64
+
+/*
+ * sub bus (transparent) will use entres from 3 to store extra from
+ * root, so need to make sure we have enought slot there, Should we
+ * increase PCI_BUS_NUM_RESOURCES?
+ */
+#define RES_NUM 16
+struct pci_root_info {
+	char name[12];
+	unsigned int res_num;
+	struct resource res[RES_NUM];
+	int bus_min;
+	int bus_max;
+	int node;
+	int link;
+};
+
+/* 4 at this time, it may become to 32 */
+#define PCI_ROOT_NR 4
+extern int pci_root_num;
+extern struct pci_root_info pci_root_info[PCI_ROOT_NR];
+
+extern void update_res(struct pci_root_info *info, size_t start,
+			      size_t end, unsigned long flags, int merge);
+#endif