From patchwork Tue Mar 12 16:35:32 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Mokrejs X-Patchwork-Id: 2257191 X-Patchwork-Delegate: bhelgaas@google.com Return-Path: X-Original-To: patchwork-linux-pci@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork1.kernel.org (Postfix) with ESMTP id C21ED3FCF6 for ; Tue, 12 Mar 2013 16:35:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933124Ab3CLQfh (ORCPT ); Tue, 12 Mar 2013 12:35:37 -0400 Received: from fold.natur.cuni.cz ([195.113.57.32]:54998 "HELO fold.natur.cuni.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S932065Ab3CLQfg (ORCPT ); Tue, 12 Mar 2013 12:35:36 -0400 Received: (qmail 8205 invoked from network); 12 Mar 2013 16:35:33 -0000 Received: from unknown (HELO ?192.168.251.6?) (192.168.251.6) by 192.168.251.1 with SMTP; 12 Mar 2013 16:35:33 -0000 Message-ID: <513F5954.9060701@fold.natur.cuni.cz> Date: Tue, 12 Mar 2013 17:35:32 +0100 From: Martin Mokrejs User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:19.0) Gecko/20100101 Firefox/19.0 SeaMonkey/2.16 MIME-Version: 1.0 To: Bjorn Helgaas CC: "linux-pci@vger.kernel.org" , Yinghai Lu , "Rafael J. Wysocki" , Sarah Sharp , Alan Stern Subject: Re: Dell Vostro 3550: pci_hotplug+acpiphp require 'pcie_aspm=force' on kernel command-line for hotplug to work References: <50EDF8FE.6040607@fold.natur.cuni.cz> <51371AD9.4040801@fold.natur.cuni.cz> <51394317.20104@fold.natur.cuni.cz> In-Reply-To: X-Enigmail-Version: 1.5 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Bjorn Helgaas wrote: > On Thu, Mar 7, 2013 at 6:47 PM, Martin Mokrejs wrote: > > There are three cards on the table now: > > pci 0000:11:00.0: [1095:3132] SiI 3132 Serial ATA Raid II Controller > pci 0000:11:00.0: [1106:3403] VT6315 Series Firewire Controller > pci 0000:11:00.0: [1033:0194] NEC Corporation uPD720200 USB 3.0 Host > Controller > >> My question is. Has the laptop hardwired the ExpressCard slot somehow through USB >> to the SandyBridge chip? > > An ExpressCard slot (spec at [1]) supports both a PCIe interface and a > USB interface, so the slot *should* be connected to a USB controller > as well as to a PCIe root port. An ExpressCard can contain either a > PCIe device or a USB device or both. Section 6.3 of the spec talks > about ACPI requirements to describe the relationship between the PCIe > and USB devices. I'm not sure that Linux pays any attention to this > in the hotplug paths, so I'm a little worried about this. (Maybe it > doesn't need to in the PCIe-aware case; I don't know.) > > It would be interesting to know exactly what devices are on your > cards. Assuming they all work when present at boot, you could find > that by doing a single "lspci -vv" and "lsusb -v" after a boot with an > empty slot, and doing it again after a boot with a card in the slot. There is no USB device hidden in the eSATA card (SiI 3132) and lspci -vvvxxx does not reveal any other device either. I also failed to ind any hidden interface in the Firewire card (based on VIA VT6315) both using lspci -vvvxxx and lsusb -vv and comparing outputs gather upon coldplug with a card in a slot and an empty slot. I even compared to states with a hotplugged card. The only difference I would mention is that acpiphp vs. pciehp give: - Physical Slot: 1 + Physical Slot: 7 for whatever card is placed in the card slot. Sometimes there is a difference in - Latency: 0, Cache Line Size: 64 bytes + Latency: 0, Cache Line Size: 32 bytes - AERCap: First Error Pointer: 00, ... + AERCap: First Error Pointer: 14, ... > The difference should be the ExpressCard devices. I'm sure this is > buried in your tarball somewhere, but all I want is the info from a > machine in default configuration -- MediaCard enabled, etc. Just the > way a typical user would be using the machine. > > [1] http://www.usb.org/developers/expresscard/EC_specifications/ExpressCard_2_0_FINAL.pdf I tried to find some differences when I have Enabled (default) or Disables Media Card Reader in BIOS. Unfortunately I had also disabled Intel WIFI and Bluetooth via Fn+F2 (there is no BIOS entry for it so I forgot about the hotkey). The wifi can be seen in lsusb and lspci. The bluetooth ... I don't know, looks btusb driver is using it. The MediaCard Reader device appears only in lsusb. If I disable it in BIOS its port is left powered on. Below, one of the changes is the disabled wifi, the other is the card reader being gone. Looks that is all I could add to the whole story. Martin --- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html --- eSATA_inserted_coldboot/lsusb_vv_after_HDD_attached.txt 2013-03-11 18:12:05.000000000 +0100 +++ eSATA_hotplug_disabled_Media_card_reader/lsusb_vv.txt 2013-03-11 22:49:51.000000000 +0100 @@ -62,7 +62,7 @@ Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power - Port 4: 0000.0103 power enable connect + Port 4: 0000.0100 power Port 5: 0000.0503 highspeed power enable connect Port 6: 0000.0100 power Device Qualifier (for other device speed): @@ -142,7 +142,7 @@ Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Port 5: 0000.0100 power - Port 6: 0000.0503 highspeed power enable connect + Port 6: 0000.0100 power Port 7: 0000.0100 power Port 8: 0000.0100 power Device Qualifier (for other device speed): @@ -1568,76 +1318,7 @@ Device Status: 0x0000 (Bus Powered) -Bus 002 Device 005: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller -Device Descriptor: - bLength 18 - bDescriptorType 1 - bcdUSB 2.00 - bDeviceClass 0 (Defined at Interface level) - bDeviceSubClass 0 - bDeviceProtocol 0 - bMaxPacketSize0 64 - idVendor 0x0bda Realtek Semiconductor Corp. - idProduct 0x0138 RTS5138 Card Reader Controller - bcdDevice 38.82 - iManufacturer 1 Generic - iProduct 2 USB2.0-CRW - iSerial 3 20090516388200000 - bNumConfigurations 1 - Configuration Descriptor: - bLength 9 - bDescriptorType 2 - wTotalLength 32 - bNumInterfaces 1 - bConfigurationValue 1 - iConfiguration 4 CARD READER - bmAttributes 0xa0 - (Bus Powered) - Remote Wakeup - MaxPower 500mA - Interface Descriptor: - bLength 9 - bDescriptorType 4 - bInterfaceNumber 0 - bAlternateSetting 0 - bNumEndpoints 2 - bInterfaceClass 8 Mass Storage - bInterfaceSubClass 6 SCSI - bInterfaceProtocol 80 Bulk-Only - iInterface 5 Bulk-In, Bulk-Out, Interface - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x01 EP 1 OUT - bmAttributes 2 - Transfer Type Bulk - Synch Type None - Usage Type Data - wMaxPacketSize 0x0200 1x 512 bytes - bInterval 0 - Endpoint Descriptor: - bLength 7 - bDescriptorType 5 - bEndpointAddress 0x82 EP 2 IN - bmAttributes 2 - Transfer Type Bulk - Synch Type None - Usage Type Data - wMaxPacketSize 0x0200 1x 512 bytes - bInterval 0 -Device Qualifier (for other device speed): - bLength 10 - bDescriptorType 6 - bcdUSB 2.00 - bDeviceClass 0 (Defined at Interface level) - bDeviceSubClass 0 - bDeviceProtocol 0 - bMaxPacketSize0 64 - bNumConfigurations 1 -Device Status: 0x0000 - (Bus Powered) - [cut]