diff mbox series

[v2,1/9] PCI/PM: Resume subordinate bus in bus type callbacks

Message ID 5830409.lOV4Wx5bFT@kreacher (mailing list archive)
State Superseded
Headers show
Series PCI/PM: Improvements related to device transitions into D0 | expand

Commit Message

Rafael J. Wysocki April 11, 2022, 2:19 p.m. UTC 
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Calling pci_resume_bus() on the secondary bus from pci_power_up() as
it is done now is questionable, because it depends on the mandatory
bridge power-up delays that are only covered by the PCI bus type PM
callbacks.

For this reason, move the subordinate bus resume to those callbacks
too and use the observation that if a bridge is being powered-up
during resume from system-wide suspend, it may be still desirable
to runtime-resume its subordinate bus after completing the system-
wide transition (in case the resume of the devices on that bus is
skipped during it).

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

v1 -> v2: No changes.

---
 drivers/pci/pci-driver.c |   15 +++++++++++++--
 drivers/pci/pci.c        |   15 ---------------
 2 files changed, 13 insertions(+), 17 deletions(-)
diff mbox series

Patch

Index: linux-pm/drivers/pci/pci-driver.c
===================================================================
--- linux-pm.orig/drivers/pci/pci-driver.c
+++ linux-pm/drivers/pci/pci-driver.c
@@ -559,6 +559,17 @@  static void pci_pm_default_resume_early(
 	pci_pme_restore(pci_dev);
 }
 
+static void pci_pm_bridge_power_up_actions(struct pci_dev *pci_dev)
+{
+	pci_bridge_wait_for_secondary_bus(pci_dev);
+	/*
+	 * When powering on a bridge from D3cold, the whole hierarchy may be
+	 * powered on into D0uninitialized state, resume them to give them a
+	 * chance to suspend again
+	 */
+	pci_resume_bus(pci_dev->subordinate);
+}
+
 #endif
 
 #ifdef CONFIG_PM_SLEEP
@@ -934,7 +945,7 @@  static int pci_pm_resume_noirq(struct de
 	pcie_pme_root_status_cleanup(pci_dev);
 
 	if (!skip_bus_pm && prev_state == PCI_D3cold)
-		pci_bridge_wait_for_secondary_bus(pci_dev);
+		pci_pm_bridge_power_up_actions(pci_dev);
 
 	if (pci_has_legacy_pm_support(pci_dev))
 		return 0;
@@ -1321,7 +1332,7 @@  static int pci_pm_runtime_resume(struct
 	pci_pm_default_resume(pci_dev);
 
 	if (prev_state == PCI_D3cold)
-		pci_bridge_wait_for_secondary_bus(pci_dev);
+		pci_pm_bridge_power_up_actions(pci_dev);
 
 	if (pm && pm->runtime_resume)
 		error = pm->runtime_resume(dev);
Index: linux-pm/drivers/pci/pci.c
===================================================================
--- linux-pm.orig/drivers/pci/pci.c
+++ linux-pm/drivers/pci/pci.c
@@ -1310,21 +1310,6 @@  static int pci_dev_wait(struct pci_dev *
 int pci_power_up(struct pci_dev *dev)
 {
 	pci_platform_power_transition(dev, PCI_D0);
-
-	/*
-	 * Mandatory power management transition delays are handled in
-	 * pci_pm_resume_noirq() and pci_pm_runtime_resume() of the
-	 * corresponding bridge.
-	 */
-	if (dev->runtime_d3cold) {
-		/*
-		 * When powering on a bridge from D3cold, the whole hierarchy
-		 * may be powered on into D0uninitialized state, resume them to
-		 * give them a chance to suspend again
-		 */
-		pci_resume_bus(dev->subordinate);
-	}
-
 	return pci_raw_set_power_state(dev, PCI_D0);
 }