diff mbox

[v5,01/10] bindings: PCI: designware: Example update

Message ID 7f4c4bad9aa7d7a1d5a6b78f4bf3a4e7c542c7f9.1523973931.git.gustavo.pimentel@synopsys.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Gustavo Pimentel April 17, 2018, 2:34 p.m. UTC
Replaces "ctrlreg" reg-name by "dbi" to be coherent with similar drivers,
however it still be compatible with any previous DT that uses the old
reg-name.

Replaces the PCIe base address example by a real PCIe base address in use.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
Changes v1->v2:
 - Removed any iATU reference or changes to avoid confusion.
 - Add "snps,dw-pcie" compatible string following Kishon's suggestion.
Changes v2->v3:
 - Nothing changed, just to follow the patch set version.
Changes v3->v4:
 - Reverted "snps,dw-pcie-rc" compatible string requested by Rob Herring.
Changes v4->v5:
 - Nothing changed, just to follow the patch set version.

 Documentation/devicetree/bindings/pci/designware-pcie.txt | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Rob Herring April 18, 2018, 2:05 p.m. UTC | #1
On Tue, Apr 17, 2018 at 9:34 AM, Gustavo Pimentel
<gustavo.pimentel@synopsys.com> wrote:
> Replaces "ctrlreg" reg-name by "dbi" to be coherent with similar drivers,
> however it still be compatible with any previous DT that uses the old
> reg-name.
>
> Replaces the PCIe base address example by a real PCIe base address in use.
>
> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> ---
> Changes v1->v2:
>  - Removed any iATU reference or changes to avoid confusion.
>  - Add "snps,dw-pcie" compatible string following Kishon's suggestion.
> Changes v2->v3:
>  - Nothing changed, just to follow the patch set version.
> Changes v3->v4:
>  - Reverted "snps,dw-pcie-rc" compatible string requested by Rob Herring.
> Changes v4->v5:
>  - Nothing changed, just to follow the patch set version.
>
>  Documentation/devicetree/bindings/pci/designware-pcie.txt | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 1da7ade..7f9804d 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -1,7 +1,8 @@ 
 * Synopsys DesignWare PCIe interface
 
 Required properties:
-- compatible: should contain "snps,dw-pcie" to identify the core.
+- compatible:
+	"snps,dw-pcie" for RC mode;
 - reg: Should contain the configuration address space.
 - reg-names: Must be "config" for the PCIe configuration space.
     (The old way of getting the configuration address space from "ranges"
@@ -41,11 +42,11 @@  EP mode:
 
 Example configuration:
 
-	pcie: pcie@dffff000 {
+	pcie: pcie@dfc00000 {
 		compatible = "snps,dw-pcie";
-		reg = <0xdffff000 0x1000>, /* Controller registers */
-		      <0xd0000000 0x2000>; /* PCI config space */
-		reg-names = "ctrlreg", "config";
+		reg = <0xdfc00000 0x0001000>, /* IP registers */
+		      <0xd0000000 0x0002000>; /* Configuration space */
+		reg-names = "dbi", "config";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		device_type = "pci";
@@ -54,5 +55,4 @@  Example configuration:
 		interrupts = <25>, <24>;
 		#interrupt-cells = <1>;
 		num-lanes = <1>;
-		num-viewport = <3>;
 	};