mbox series

[0/4] add the imx8 pcie phy driver support

Message ID 1631845863-24249-1-git-send-email-hongxing.zhu@nxp.com
Headers show
Series add the imx8 pcie phy driver support | expand

Message

Richard Zhu Sept. 17, 2021, 2:30 a.m. UTC 
refer to the discussion [1] when try to enable i.MX8MM PCIe support,
one standalone PCIe PHY driver should be seperated from i.MX PCIe
driver when enable i.MX8MM PCIe support.

This patch-set adds the standalone PCIe PHY driver suport, and as a
preparatory to add the i.MX8MM PCIe support later.

The PCIe works on i.MX8MM EVK board based the the blkctrl power driver
[2] and this PHY driver patch-set.

[1] https://patchwork.ozlabs.org/project/linux-pci/patch/20210510141509.929120-3-l.stach@pengutronix.de/
[2] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210910202640.980366-1-l.stach@pengutronix.de/

[PATCH 1/4] dt-bindings: phy: phy-imx8-pcie: Add binding for the pad
[PATCH 2/4] dt-bindings: phy: add imx8 pcie phy driver support
[PATCH 3/4] arm64: dts: imx8mm: add the pcie phy support
[PATCH 4/4] phy: freescale: pcie: initialize the imx8 pcie standalone

Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml |  66 ++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi                |   4 ++
arch/arm64/boot/dts/freescale/imx8mm.dtsi                    |  12 ++++++
drivers/phy/freescale/Kconfig                                |   9 +++++
drivers/phy/freescale/Makefile                               |   1 +
drivers/phy/freescale/phy-fsl-imx8-pcie.c                    | 167 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/dt-bindings/phy/phy-imx8-pcie.h                      |  14 +++++++
7 files changed, 273 insertions(+)