mbox series

[0/3] Add missing vdd-supply for QUSB2 PHY

Message ID 20210927044824.30246-1-shawn.guo@linaro.org
Headers show
Series Add missing vdd-supply for QUSB2 PHY | expand

Message

Shawn Guo Sept. 27, 2021, 4:48 a.m. UTC
The series adds missing vdd-supply for QUSB2 PHY which is required for
digital circuit.  The driver works right now likely because firmware
already sets it up.  Add it to bindings, driver and DTS that miss the
supply.

It should not cause problem for existing DTBs:
- SC7180, SDM630, SDM845 based platforms already specified vdd-supply
  in the DTBs.
- MSM8996 and MSM8998 platform DTBs miss vdd-supply, but dummy regulator
  will ensure QUSB2 PHY driver works as before on these platforms.


Shawn Guo (3):
  dt-bindings: phy: qcom,qusb2: Add missing vdd-supply
  phy: qcom-qusb2: Add missing vdd supply
  arm64: dts: qcom: Add missing vdd-supply for QUSB2 PHY

 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 6 ++++++
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi              | 2 ++
 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi    | 1 +
 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi           | 1 +
 arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi      | 1 +
 drivers/phy/qualcomm/phy-qcom-qusb2.c                     | 2 +-
 6 files changed, 12 insertions(+), 1 deletion(-)