mbox series

[v2,0/8] Fix dtbs_check warning(s) for Qualcomm QMP PHY

Message ID 20220228123019.382037-1-bhupesh.sharma@linaro.org
Headers show
Series Fix dtbs_check warning(s) for Qualcomm QMP PHY | expand

Message

Bhupesh Sharma Feb. 28, 2022, 12:30 p.m. UTC 
Changes since v1:
-----------------
- v1 can be found here: https://www.spinics.net/lists/linux-arm-msm/msg104871.html
- Addressed review comments from Dmitry.
- Addressed the remaining dtbs_check warnings rasied by Rob's bot on v1.

Shawn Guo recently fixed a large number of 'dtbs_check' warnings
on Qualcomm DTS files for qmp phys. However a few warnings are still left
(possibly due to new dts files being added over time).

So, I decided to clean them up.
After this series, '$ make dtbs_check' leads to no warning for QCOM
QMP PHY.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh@kernel.org>

Bhupesh Sharma (8):
  dt-bindings: phy: qcom,qmp: Mark '#clock-cells' as a 'optional'
    property
  dt-bindings: phy: qcom,qmp: Describe 'vdda-max-microamp' &
    'vdda-pll-max-microamp' properties
  arm64: dts: qcom: msm8996-xiaomi: Drop max-microamp and vddp-ref-clk
    properties from QMP PHY
  arm64: dts: qcom: sc7280: Fix qmp phy node (use phy@ instead of
    lanes@)
  arm64: dts: qcom: sm8450: Fix qmp ufs phy node (use phy@ instead of
    lanes@)
  arm64: dts: qcom: ipq6018: Fix qmp usb3 phy node
  dt-bindings: phy: qcom,qmp: Describe phy@ subnode properly
  dt-bindings: phy: qcom,qmp: Mark 'vdda-pll-supply' & 'vdda-phy-supply'
    as optional

 .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 26 +++++++++++++------
 arch/arm64/boot/dts/qcom/ipq6018.dtsi         |  4 +--
 .../boot/dts/qcom/msm8996-xiaomi-common.dtsi  |  5 ----
 arch/arm64/boot/dts/qcom/sc7280.dtsi          |  2 +-
 arch/arm64/boot/dts/qcom/sm8450.dtsi          |  2 +-
 5 files changed, 22 insertions(+), 17 deletions(-)