mbox series

[v2,0/3] PHY-GMII-SEL: Add support for SGMII mode

Message ID 20230309063514.398705-1-s-vadapalli@ti.com
Headers show
Series PHY-GMII-SEL: Add support for SGMII mode | expand

Message

Siddharth Vadapalli March 9, 2023, 6:35 a.m. UTC 
Hello,

This series adds support to configure the CPSW MAC's PHY in SGMII mode.
Also, SGMII mode is enabled for TI's J7200 and J721E SoCs.

Changes from v1:
1. Add "break" statement within "case PHY_INTERFACE_MODE_SGMII".
2. Add newline before "default" case.
3. Update commit message of patch 1/3 to follow the existing convention.

v1:
https://lore.kernel.org/r/20230309062237.389444-1-s-vadapalli@ti.com/

Siddharth Vadapalli (3):
  phy: ti: gmii-sel: Add support for SGMII mode
  phy: ti: gmii-sel: Enable SGMII mode for J7200
  phy: ti: gmii-sel: Enable SGMII mode for J721E

 drivers/phy/ti/phy-gmii-sel.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

Comments

Siddharth Vadapalli April 4, 2023, 7:04 a.m. UTC | #1 
Hello,

This series applies cleanly as of next-20230404. Please merge this series
followed by the series at:
https://lore.kernel.org/r/20230331062521.529005-1-s-vadapalli@ti.com/
in case of no concerns.

Regards,
Siddharth.

On 09/03/23 12:05, Siddharth Vadapalli wrote:
> Hello,
> 
> This series adds support to configure the CPSW MAC's PHY in SGMII mode.
> Also, SGMII mode is enabled for TI's J7200 and J721E SoCs.
> 
> Changes from v1:
> 1. Add "break" statement within "case PHY_INTERFACE_MODE_SGMII".
> 2. Add newline before "default" case.
> 3. Update commit message of patch 1/3 to follow the existing convention.
> 
> v1:
> https://lore.kernel.org/r/20230309062237.389444-1-s-vadapalli@ti.com/
> 
> Siddharth Vadapalli (3):
>   phy: ti: gmii-sel: Add support for SGMII mode
>   phy: ti: gmii-sel: Enable SGMII mode for J7200
>   phy: ti: gmii-sel: Enable SGMII mode for J721E
> 
>  drivers/phy/ti/phy-gmii-sel.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
>
Roger Quadros April 4, 2023, 12:13 p.m. UTC | #2 
On 09/03/2023 08:35, Siddharth Vadapalli wrote:
> Hello,
> 
> This series adds support to configure the CPSW MAC's PHY in SGMII mode.
> Also, SGMII mode is enabled for TI's J7200 and J721E SoCs.
> 
> Changes from v1:
> 1. Add "break" statement within "case PHY_INTERFACE_MODE_SGMII".
> 2. Add newline before "default" case.
> 3. Update commit message of patch 1/3 to follow the existing convention.
> 
> v1:
> https://lore.kernel.org/r/20230309062237.389444-1-s-vadapalli@ti.com/
> 
> Siddharth Vadapalli (3):
>   phy: ti: gmii-sel: Add support for SGMII mode
>   phy: ti: gmii-sel: Enable SGMII mode for J7200
>   phy: ti: gmii-sel: Enable SGMII mode for J721E
> 
>  drivers/phy/ti/phy-gmii-sel.c | 12 ++++++++++--
>  1 file changed, 10 insertions(+), 2 deletions(-)
> 

For the series:

Reviewed-by: Roger Quadros <rogerq@kernel.org>
Vinod Koul May 16, 2023, 2:31 p.m. UTC | #3 
On 09-03-23, 12:05, Siddharth Vadapalli wrote:
> Hello,
> 
> This series adds support to configure the CPSW MAC's PHY in SGMII mode.
> Also, SGMII mode is enabled for TI's J7200 and J721E SoCs.

Applied, thanks