Show patches with: State = Action Required       |   135 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v3,2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576 [v3,1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576 - - - --- 2024-09-26 Frank Wang New
[v3,1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576 [v3,1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576 - - - --- 2024-09-26 Frank Wang New
dt-bindings: phy: mediatek: tphy: add a property for power-domains dt-bindings: phy: mediatek: tphy: add a property for power-domains - 1 - --- 2024-09-26 Macpaul Lin New
[5/5] ARM: dts: imx6qdl: convert fsl,tx-d-cal to correct value dtbs_check warning clean up against fsl,mxs-usbphy.yaml - - - --- 2024-09-26 Xu Yang New
[4/5] arm64: dts: imx8qxp: change usbphy1 compatible dtbs_check warning clean up against fsl,mxs-usbphy.yaml - - - --- 2024-09-26 Xu Yang New
[3/5] arm64: dts: imx8qm: change usbphy1 compatible dtbs_check warning clean up against fsl,mxs-usbphy.yaml - - - --- 2024-09-26 Xu Yang New
[2/5] arm64: dts: imx8dxl-ss-conn: change usbphy1 compatible dtbs_check warning clean up against fsl,mxs-usbphy.yaml - - - --- 2024-09-26 Xu Yang New
[1/5] dt-bindings: phy: mxs-usb-phy: add imx8qxp compatible dtbs_check warning clean up against fsl,mxs-usbphy.yaml 1 - - --- 2024-09-26 Xu Yang New
[v3] dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300 [v3] dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300 - 1 - --- 2024-09-25 Jingyi Wang New
[v4,6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100 Add support for PCIe3 on x1e80100 - 2 - --- 2024-09-24 Qiang Yu New
[v4,5/6] PCI: qcom: Add support for X1E80100 SoC Add support for PCIe3 on x1e80100 - - - --- 2024-09-24 Qiang Yu New
[v4,4/6] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks Add support for PCIe3 on x1e80100 - 2 - --- 2024-09-24 Qiang Yu New
[v4,3/6] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3 Add support for PCIe3 on x1e80100 - 2 - --- 2024-09-24 Qiang Yu New
[v4,2/6] dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml Add support for PCIe3 on x1e80100 - 2 - --- 2024-09-24 Qiang Yu New
[v4,1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8 Add support for PCIe3 on x1e80100 - 1 - --- 2024-09-24 Qiang Yu New
[v17,8/8] arm64: dts: imx8mq: tqma8mq-mba8mx: Enable HDMI support Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ - - - --- 2024-09-24 Sandor Yu New
[v17,7/8] arm64: dts: imx8mq: Add DCSS + HDMI/DP display pipeline Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ - - - --- 2024-09-24 Sandor Yu New
[v17,6/8] phy: freescale: Add DisplayPort/HDMI Combo-PHY driver for i.MX8MQ Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ - - - --- 2024-09-24 Sandor Yu New
[v17,5/8] dt-bindings: phy: Add Freescale iMX8MQ DP and HDMI PHY Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ - 1 - --- 2024-09-24 Sandor Yu New
[v17,4/8] drm: bridge: Cadence: Add MHDP8501 DP/HDMI driver Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ - - 1 --- 2024-09-24 Sandor Yu New
[v17,3/8] dt-bindings: display: bridge: Add Cadence MHDP8501 Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ - 1 - --- 2024-09-24 Sandor Yu New
[v17,2/8] phy: Add HDMI configuration options Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ - 2 - --- 2024-09-24 Sandor Yu New
[v17,1/8] drm: bridge: Cadence: Create mhdp helper driver Initial support Cadence MHDP8501(HDMI/DP) for i.MX8MQ - - - --- 2024-09-24 Sandor Yu New
phy: tegra: xusb: Call of_node_put(np) only once in tegra_xusb_padctl_get() phy: tegra: xusb: Call of_node_put(np) only once in tegra_xusb_padctl_get() - - - --- 2024-09-23 Markus Elfring New
phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK - 2 - --- 2024-09-23 Cristian Ciocaltea New
[v3,5/5] drm/msm/dp: Add DisplayPort controller for SA8775P Add support for DisplayPort on SA8775P platform - 1 - --- 2024-09-23 Soutrik Mukhopadhyay New
[v3,4/5] dt-bindings: display: msm: dp-controller: document SA8775P compatible Add support for DisplayPort on SA8775P platform 1 - - --- 2024-09-23 Soutrik Mukhopadhyay New
[v3,3/5] phy: qcom: edp: Add support for eDP PHY on SA8775P Add support for DisplayPort on SA8775P platform - 2 - --- 2024-09-23 Soutrik Mukhopadhyay New
[v3,2/5] phy: qcom: edp: Introduce aux_cfg array for version specific aux settings Add support for DisplayPort on SA8775P platform - 1 - --- 2024-09-23 Soutrik Mukhopadhyay New
[v3,1/5] dt-bindings: phy: Add eDP PHY compatible for sa8775p Add support for DisplayPort on SA8775P platform 1 1 - --- 2024-09-23 Soutrik Mukhopadhyay New
[RESEND,2/2] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576 [RESEND,1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576 - - - --- 2024-09-23 Frank Wang New
[RESEND,1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576 [RESEND,1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576 - - - --- 2024-09-23 Frank Wang New
phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL - - - --- 2024-09-20 Andy Yan New
[4/4] phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions phy: Fix some typos in phy-airoha-pcie driver - - - --- 2024-09-18 Lorenzo Bianconi New
[3/4] phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll() phy: Fix some typos in phy-airoha-pcie driver - - - --- 2024-09-18 Lorenzo Bianconi New
[2/4] phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l() phy: Fix some typos in phy-airoha-pcie driver - - - --- 2024-09-18 Lorenzo Bianconi New
[1/4] phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out() phy: Fix some typos in phy-airoha-pcie driver - - - --- 2024-09-18 Lorenzo Bianconi New
[3/3] arm64: dts: qcom: x1e80100: fix PCIe5 PHY clocks arm64: dts: qcom: x1e80100: fix missing PCIe PHY clocks - 1 - --- 2024-09-16 Johan Hovold New
[2/3] arm64: dts: qcom: x1e80100: fix PCIe4 and PCIe6a PHY clocks arm64: dts: qcom: x1e80100: fix missing PCIe PHY clocks - 2 - --- 2024-09-16 Johan Hovold New
[1/3] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks arm64: dts: qcom: x1e80100: fix missing PCIe PHY clocks 1 - - --- 2024-09-16 Johan Hovold New
[RESEND,v4,1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561 dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561 1 - - --- 2024-09-15 Ilya Orazov New
[v4,1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561 dt-bindings: phy: ti,tcan104x-can: Document Microchip 1 - - --- 2024-09-15 Ilya Orazov New
[v4] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe() [v4] phy: renesas: rcar-gen3-usb2: Fix an error handling path in rcar_gen3_phy_usb2_probe() - 1 - --- 2024-09-14 Christophe JAILLET New
[V8,5/5] phy: freescale: fsl-samsung-hdmi: Remove unnecessary LUT entries phy: freescale: fsl-samsung-hdmi: Expand phy clock options - 2 2 --- 2024-09-14 Adam Ford New
[V8,4/5] phy: freescale: fsl-samsung-hdmi: Use closest divider phy: freescale: fsl-samsung-hdmi: Expand phy clock options - 2 1 --- 2024-09-14 Adam Ford New
[V8,3/5] phy: freescale: fsl-samsung-hdmi: Support dynamic integer phy: freescale: fsl-samsung-hdmi: Expand phy clock options - 2 1 --- 2024-09-14 Adam Ford New
[V8,2/5] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup phy: freescale: fsl-samsung-hdmi: Expand phy clock options - 3 2 --- 2024-09-14 Adam Ford New
[V8,1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro phy: freescale: fsl-samsung-hdmi: Expand phy clock options - 3 2 --- 2024-09-14 Adam Ford New
[2/2] phy: bcm-ns-usb2: drop support for old binding variant [1/2] dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant - - - --- 2024-09-13 Rafał Miłecki New
[1/2] dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant [1/2] dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant 1 - - --- 2024-09-13 Rafał Miłecki New
[4/4] phy: qcom: qmp-usb: move driver data initialisation earlier phy: qcom: qmp-usb: fix NULL-deref on runtime suspend - - - --- 2024-09-11 Johan Hovold New
[3/4] phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend phy: qcom: qmp-usb: fix NULL-deref on runtime suspend - - - --- 2024-09-11 Johan Hovold New
[2/4] phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend phy: qcom: qmp-usb: fix NULL-deref on runtime suspend - - - --- 2024-09-11 Johan Hovold New
[1/4] phy: qcom: qmp-usb: fix NULL-deref on runtime suspend phy: qcom: qmp-usb: fix NULL-deref on runtime suspend - - - --- 2024-09-11 Johan Hovold New
[v8,5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board Add STM32MP25 USB3/PCIE COMBOPHY driver - - - --- 2024-09-11 Christian Bruel New
[v8,4/5] arm64: dts: st: Add combophy node on stm32mp251 Add STM32MP25 USB3/PCIE COMBOPHY driver - - - --- 2024-09-11 Christian Bruel New
[v8,3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver Add STM32MP25 USB3/PCIE COMBOPHY driver - - - --- 2024-09-11 Christian Bruel New
[v8,2/5] phy: stm32: Add support for STM32MP25 COMBOPHY. Add STM32MP25 USB3/PCIE COMBOPHY driver - - - --- 2024-09-11 Christian Bruel New
[v8,1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings Add STM32MP25 USB3/PCIE COMBOPHY driver - 1 - --- 2024-09-11 Christian Bruel New
[v2] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300 [v2] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300 - - - --- 2024-09-11 Jingyi Wang New
[v5,5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node [v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" - - - --- 2024-09-11 Xu Yang New
[v5,4/5] arm64: dts: imx95: add usb3 related nodes [v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" - - - --- 2024-09-11 Xu Yang New
[v5,3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95 [v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" - 1 - --- 2024-09-11 Xu Yang New
[v5,2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95 [v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" 1 - - --- 2024-09-11 Xu Yang New
[v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" [v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" - 1 - --- 2024-09-11 Xu Yang New
[2/2] phy: freescale: fsl-samsung-hdmi: Add PLL LUT entries for some non-CEA-861 modes Extending PLL LUT for i.MX8MP Samsung HDMI PHY - - - --- 2024-09-10 Frieder Schrempf New
[1/2] phy: freescale: fsl-samsung-hdmi: Add references for calculating LUT parameters to comment Extending PLL LUT for i.MX8MP Samsung HDMI PHY - - - --- 2024-09-10 Frieder Schrempf New
phy: ti: phy-j721e-wiz: fix usxgmii configuration phy: ti: phy-j721e-wiz: fix usxgmii configuration - - - --- 2024-09-10 Siddharth Vadapalli New
[v2,9/9] phy: lan969x-serdes: add support for lan969x serdes driver phy: sparx5-serdes: add support for lan969x serdes driver - 1 - --- 2024-09-09 Daniel Machon New
[v2,8/9] dt-bindings: phy: sparx5: document lan969x phy: sparx5-serdes: add support for lan969x serdes driver - 2 - --- 2024-09-09 Daniel Machon New
[v2,7/9] phy: sparx5-serdes: add support for branching on chip type phy: sparx5-serdes: add support for lan969x serdes driver - 1 - --- 2024-09-09 Daniel Machon New
[v2,6/9] phy: sparx5-serdes: add indirection layer to register macros phy: sparx5-serdes: add support for lan969x serdes driver - 1 - --- 2024-09-09 Daniel Machon New
[v2,5/9] phy: sparx5-serdes: add function for getting the CMU index phy: sparx5-serdes: add support for lan969x serdes driver - 1 - --- 2024-09-09 Daniel Machon New
[v2,4/9] phy: sparx5-serdes: add ops to match data phy: sparx5-serdes: add support for lan969x serdes driver - 1 - --- 2024-09-09 Daniel Machon New
[v2,3/9] phy: sparx5-serdes: add constant for the number of CMU's phy: sparx5-serdes: add support for lan969x serdes driver - 1 - --- 2024-09-09 Daniel Machon New
[v2,2/9] phy: sparx5-serdes: add constants to match data phy: sparx5-serdes: add support for lan969x serdes driver - 1 - --- 2024-09-09 Daniel Machon New
[v2,1/9] phy: sparx5-serdes: add support for private match data phy: sparx5-serdes: add support for lan969x serdes driver - 1 - --- 2024-09-09 Daniel Machon New
[v3] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property [v3] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property - - - --- 2024-09-08 Josua Mayer New
phy: qcom: edp: Add runtime PM support phy: qcom: edp: Add runtime PM support - - - --- 2024-09-07 Abel Vesa New
[v3,3/3] phy: phy-rockchip-inno-usb2: Use dev_err_probe() in the probe path Improve error handling in Rockchip Inno USB 2.0 PHY driver - 1 - --- 2024-09-05 Dragan Simic New
[v3,2/3] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better Improve error handling in Rockchip Inno USB 2.0 PHY driver - 1 - --- 2024-09-05 Dragan Simic New
[v3,1/3] phy: phy-rockchip-inno-usb2: Perform trivial code cleanups Improve error handling in Rockchip Inno USB 2.0 PHY driver - 1 - --- 2024-09-05 Dragan Simic New
[19/19] arm64: dts: qcom: add base QCS8300 RIDE dts Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[18/19] arm64: dts: qcom: add initial support for QCS8300 DTSI Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[17/19] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300 Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[16/19] dt-bindings: arm: qcom: document QCS8275/QCS8300 SoC and reference board Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[15/19] dt-bindings: soc: qcom,aoss-qmp: Document the QCS8300 AOSS channel Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[14/19] dt-bindings: nvmem: qfprom: Add compatible for QCS8300 Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[13/19] dt-bindings: mfd: qcom,tcsr: Add compatible for QCS8300 Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[12/19] dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[11/19] dt-bindings: soc: qcom: add qcom,qcs8300-imem compatible Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[10/19] dt-bindings: firmware: qcom,scm: document SCM on QCS8300 SoCs Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[09/19] dt-bindings: arm-smmu: Add compatible for QCS8300 SoC Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[08/19] dt-bindings: qcom,pdc: document QCS8300 Power Domain Controller Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[07/19] pmdomain: qcom: rpmhpd: Add QCS8300 power domains Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[06/19] dt-bindings: power: rpmpd: Add QCS8300 power domains Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[05/19] phy: qcom-qmp-ufs: Add support for QCS8300 Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[04/19] dt-bindings: ufs: qcom: Document the QCS8300 UFS Controller Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[03/19] dt-bindings: phy: Add QMP UFS PHY comptible for QCS8300 Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
[02/19] remoteproc: qcom: pas: Add QCS8300 remoteproc support Add initial support for QCS8300 - - - --- 2024-09-04 Jingyi Wang New
« 1 2 »