@@ -145,6 +145,19 @@
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ usbphy0: phy@7b000 {
+ compatible = "qcom,ipq5332-usb-hsphy";
+ reg = <0x0007b000 0x12c>;
+
+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+
+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
qfprom: efuse@a4000 {
compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
reg = <0x000a4000 0x721>;
@@ -290,6 +303,48 @@
status = "disabled";
};
+ usb: usb@8af8800 {
+ compatible = "qcom,ipq5332-dwc3", "qcom,dwc3";
+ reg = <0x08af8800 0x400>;
+
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq";
+
+ clocks = <&gcc GCC_USB0_MASTER_CLK>,
+ <&gcc GCC_SNOC_USB_CLK>,
+ <&gcc GCC_USB0_SLEEP_CLK>,
+ <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "core",
+ "iface",
+ "sleep",
+ "mock_utmi";
+
+ resets = <&gcc GCC_USB_BCR>;
+
+ qcom,select-utmi-as-pipe-clk;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ status = "disabled";
+
+ usb2_0_dwc: usb@8a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x08a00000 0xe000>;
+ clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+ clock-names = "ref";
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ phy-names = "usb2-phy";
+ phys = <&usbphy0>;
+ tx-fifo-resize;
+ snps,is-utmi-l1-suspend;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
Add USB phy and controller nodes. Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- v10: usb@8a00000 -> usb@8af8800 "make W=1 ARCH=arm64 -j 16 CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check" passed v9: usb2@8a00000 -> usb@8a00000 "make ARCH=arm64 -j 16 CHECK_DTBS=y DT_SCHEMA_FILES=qcom,ipq5332-usb-hsphy.yaml dtbs_check" passed v6: Remove clock names Move the nodes to address sorted location v5: Use generic phy instead of usb-phy 'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom dtbs_check' passed 'DT_CHECKER_FLAGS='-v -m' DT_SCHEMA_FILES=qcom dt_binding_check' passed v4: Change node name Remove blank line 'make CHECK_DTBS=y DT_SCHEMA_FILES=qcom qcom/ipq5332-rdp441.dtb' passed v1: Rename phy node Change compatible from m31,ipq5332-usb-hsphy -> qcom,ipq5332-usb-hsphy Remove 'qscratch' from phy node Fix alignment and upper-case hex no.s Add clock definition for the phy Remove snps,ref-clock-period-ns as it is not used. dwc3_ref_clk_period() in dwc3/core.c takes the frequency from ref clock and calculates fladj as appropriate. --- arch/arm64/boot/dts/qcom/ipq5332.dtsi | 55 +++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)