diff mbox series

[v8,09/13] phy: tegra: xusb: Add wake/sleepwalk for Tegra210

Message ID 20210325164057.793954-10-thierry.reding@gmail.com
State Changes Requested
Headers show
Series Tegra XHCI controller ELPG support | expand

Commit Message

Thierry Reding March 25, 2021, 4:40 p.m. UTC
From: JC Kuo <jckuo@nvidia.com>

This commit implements Tegra210 XUSB PADCTL wake and sleepwalk
routines. Sleepwalk logic is in PMC (always-on) hardware block.
PMC driver provides managed access to the sleepwalk registers
via regmap framework.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/phy/tegra/xusb-tegra210.c | 930 ++++++++++++++++++++++++++++++
 1 file changed, 930 insertions(+)

Comments

Nathan Chancellor March 25, 2021, 8:26 p.m. UTC | #1
On Thu, Mar 25, 2021 at 05:40:53PM +0100, Thierry Reding wrote:
> From: JC Kuo <jckuo@nvidia.com>
> 
> This commit implements Tegra210 XUSB PADCTL wake and sleepwalk
> routines. Sleepwalk logic is in PMC (always-on) hardware block.
> PMC driver provides managed access to the sleepwalk registers
> via regmap framework.
> 
> Signed-off-by: JC Kuo <jckuo@nvidia.com>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>  drivers/phy/tegra/xusb-tegra210.c | 930 ++++++++++++++++++++++++++++++
>  1 file changed, 930 insertions(+)
> 
> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
> index b038d032fea1..8af73ba78ad7 100644
> --- a/drivers/phy/tegra/xusb-tegra210.c
> +++ b/drivers/phy/tegra/xusb-tegra210.c
> @@ -16,6 +16,8 @@
>  #include <linux/regulator/consumer.h>
>  #include <linux/reset.h>
>  #include <linux/slab.h>
> +#include <linux/regmap.h>
> +#include <linux/of_platform.h>
>  
>  #include <soc/tegra/fuse.h>
>  
> @@ -52,6 +54,20 @@
>  #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5))
>  #define XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED 0x7
>  
> +#define XUSB_PADCTL_ELPG_PROGRAM_0 0x20
> +#define   USB2_PORT_WAKE_INTERRUPT_ENABLE(x)      BIT((x))
> +#define   USB2_PORT_WAKEUP_EVENT(x)               BIT((x) + 7)
> +#define   SS_PORT_WAKE_INTERRUPT_ENABLE(x)        BIT((x) + 14)
> +#define   SS_PORT_WAKEUP_EVENT(x)                 BIT((x) + 21)
> +#define   USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 28)
> +#define   USB2_HSIC_PORT_WAKEUP_EVENT(x)          BIT((x) + 30)
> +#define   ALL_WAKE_EVENTS ( \
> +		USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) | \
> +		USB2_PORT_WAKEUP_EVENT(2) | USB2_PORT_WAKEUP_EVENT(3) | \
> +		SS_PORT_WAKEUP_EVENT(0) | SS_PORT_WAKEUP_EVENT(1) | \
> +		SS_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(3) | \
> +		USB2_HSIC_PORT_WAKEUP_EVENT(0))
> +
>  #define XUSB_PADCTL_ELPG_PROGRAM1 0x024
>  #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31)
>  #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 30)
> @@ -90,6 +106,8 @@
>  #define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR (1 << 2)
>  #define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DISC_OVRD (1 << 1)
>  #define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_CHRP_OVRD (1 << 0)
> +#define   RPD_CTRL(x)                      (((x) & 0x1f) << 26)
> +#define   RPD_CTRL_VALUE(x)                (((x) >> 26) & 0x1f)
>  
>  #define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284
>  #define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD (1 << 11)
> @@ -108,6 +126,8 @@
>  #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT 12
>  #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK 0x7f
>  #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL 0x1e
> +#define   TCTRL_VALUE(x)                (((x) & 0x3f) >> 0)
> +#define   PCTRL_VALUE(x)                (((x) >> 6) & 0x3f)
>  
>  #define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
>  #define XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE (1 << 18)
> @@ -251,16 +271,161 @@
>  #define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING 8
>  #define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_GROUNDED 0
>  
> +/* USB2 SLEEPWALK registers */
> +#define UTMIP(_port, _offset1, _offset2) \
> +		(((_port) <= 2) ? (_offset1) : (_offset2))
> +
> +#define PMC_UTMIP_UHSIC_SLEEP_CFG(x)	UTMIP(x, 0x1fc, 0x4d0)
> +#define   UTMIP_MASTER_ENABLE(x)		UTMIP(x, BIT(8 * (x)), BIT(0))
> +#define   UTMIP_FSLS_USE_PMC(x)			UTMIP(x, BIT(8 * (x) + 1), \
> +							BIT(1))
> +#define   UTMIP_PCTRL_USE_PMC(x)		UTMIP(x, BIT(8 * (x) + 2), \
> +							BIT(2))
> +#define   UTMIP_TCTRL_USE_PMC(x)		UTMIP(x, BIT(8 * (x) + 3), \
> +							BIT(3))
> +#define   UTMIP_WAKE_VAL(_port, _value)		(((_value) & 0xf) << \
> +					(UTMIP(_port, 8 * (_port) + 4, 4)))
> +#define   UTMIP_WAKE_VAL_NONE(_port)		UTMIP_WAKE_VAL(_port, 12)
> +#define   UTMIP_WAKE_VAL_ANY(_port)		UTMIP_WAKE_VAL(_port, 15)
> +
> +#define PMC_UTMIP_UHSIC_SLEEP_CFG1	(0x4d0)
> +#define   UTMIP_RPU_SWITC_LOW_USE_PMC_PX(x)	BIT((x) + 8)
> +#define   UTMIP_RPD_CTRL_USE_PMC_PX(x)		BIT((x) + 16)
> +
> +#define PMC_UTMIP_MASTER_CONFIG		(0x274)
> +#define   UTMIP_PWR(x)				UTMIP(x, BIT(x), BIT(4))
> +#define   UHSIC_PWR(x)				BIT(3)
> +
> +#define PMC_USB_DEBOUNCE_DEL		(0xec)
> +#define   DEBOUNCE_VAL(x)			(((x) & 0xffff) << 0)
> +#define   UTMIP_LINE_DEB_CNT(x)			(((x) & 0xf) << 16)
> +#define   UHSIC_LINE_DEB_CNT(x)			(((x) & 0xf) << 20)
> +
> +#define PMC_UTMIP_UHSIC_FAKE(x)		UTMIP(x, 0x218, 0x294)
> +#define   UTMIP_FAKE_USBOP_VAL(x)		UTMIP(x, BIT(4 * (x)), BIT(8))
> +#define   UTMIP_FAKE_USBON_VAL(x)		UTMIP(x, BIT(4 * (x) + 1), \
> +							BIT(9))
> +#define   UTMIP_FAKE_USBOP_EN(x)		UTMIP(x, BIT(4 * (x) + 2), \
> +							BIT(10))
> +#define   UTMIP_FAKE_USBON_EN(x)		UTMIP(x, BIT(4 * (x) + 3), \
> +							BIT(11))
> +
> +#define PMC_UTMIP_UHSIC_SLEEPWALK_CFG(x)	UTMIP(x, 0x200, 0x288)
> +#define   UTMIP_LINEVAL_WALK_EN(x)		UTMIP(x, BIT(8 * (x) + 7), \
> +							BIT(15))
> +
> +#define PMC_USB_AO			(0xf0)
> +#define   USBOP_VAL_PD(x)			UTMIP(x, BIT(4 * (x)), BIT(20))
> +#define   USBON_VAL_PD(x)			UTMIP(x, BIT(4 * (x) + 1), \
> +							BIT(21))
> +#define   STROBE_VAL_PD(x)			BIT(12)
> +#define   DATA0_VAL_PD(x)			BIT(13)
> +#define   DATA1_VAL_PD				BIT(24)
> +
> +#define PMC_UTMIP_UHSIC_SAVED_STATE(x)	UTMIP(x, 0x1f0, 0x280)
> +#define   SPEED(_port, _value)			(((_value) & 0x3) << \
> +						(UTMIP(_port, 8 * (_port), 8)))
> +#define   UTMI_HS(_port)			SPEED(_port, 0)
> +#define   UTMI_FS(_port)			SPEED(_port, 1)
> +#define   UTMI_LS(_port)			SPEED(_port, 2)
> +#define   UTMI_RST(_port)			SPEED(_port, 3)
> +
> +#define PMC_UTMIP_UHSIC_TRIGGERS		(0x1ec)
> +#define   UTMIP_CLR_WALK_PTR(x)			UTMIP(x, BIT(x), BIT(16))
> +#define   UTMIP_CAP_CFG(x)			UTMIP(x, BIT((x) + 4), BIT(17))
> +#define   UTMIP_CLR_WAKE_ALARM(x)		UTMIP(x, BIT((x) + 12), \
> +							BIT(19))
> +#define   UHSIC_CLR_WALK_PTR			BIT(3)
> +#define   UHSIC_CLR_WAKE_ALARM			BIT(15)
> +
> +#define PMC_UTMIP_SLEEPWALK_PX(x)	UTMIP(x, 0x204 + (4 * (x)), \
> +							0x4e0)
> +/* phase A */
> +#define   UTMIP_USBOP_RPD_A			BIT(0)
> +#define   UTMIP_USBON_RPD_A			BIT(1)
> +#define   UTMIP_AP_A				BIT(4)
> +#define   UTMIP_AN_A				BIT(5)
> +#define   UTMIP_HIGHZ_A				BIT(6)
> +/* phase B */
> +#define   UTMIP_USBOP_RPD_B			BIT(8)
> +#define   UTMIP_USBON_RPD_B			BIT(9)
> +#define   UTMIP_AP_B				BIT(12)
> +#define   UTMIP_AN_B				BIT(13)
> +#define   UTMIP_HIGHZ_B				BIT(14)
> +/* phase C */
> +#define   UTMIP_USBOP_RPD_C			BIT(16)
> +#define   UTMIP_USBON_RPD_C			BIT(17)
> +#define   UTMIP_AP_C				BIT(20)
> +#define   UTMIP_AN_C				BIT(21)
> +#define   UTMIP_HIGHZ_C				BIT(22)
> +/* phase D */
> +#define   UTMIP_USBOP_RPD_D			BIT(24)
> +#define   UTMIP_USBON_RPD_D			BIT(25)
> +#define   UTMIP_AP_D				BIT(28)
> +#define   UTMIP_AN_D				BIT(29)
> +#define   UTMIP_HIGHZ_D				BIT(30)
> +
> +#define PMC_UTMIP_UHSIC_LINE_WAKEUP	(0x26c)
> +#define   UTMIP_LINE_WAKEUP_EN(x)		UTMIP(x, BIT(x), BIT(4))
> +#define   UHSIC_LINE_WAKEUP_EN			BIT(3)
> +
> +#define PMC_UTMIP_TERM_PAD_CFG		(0x1f8)
> +#define   PCTRL_VAL(x)				(((x) & 0x3f) << 1)
> +#define   TCTRL_VAL(x)				(((x) & 0x3f) << 7)
> +
> +#define PMC_UTMIP_PAD_CFGX(x)		(0x4c0 + (4 * (x)))
> +#define   RPD_CTRL_PX(x)			(((x) & 0x1f) << 22)
> +
> +#define PMC_UHSIC_SLEEP_CFG	PMC_UTMIP_UHSIC_SLEEP_CFG(0)
> +#define   UHSIC_MASTER_ENABLE			BIT(24)
> +#define   UHSIC_WAKE_VAL(_value)		(((_value) & 0xf) << 28)
> +#define   UHSIC_WAKE_VAL_SD10			UHSIC_WAKE_VAL(2)
> +#define   UHSIC_WAKE_VAL_NONE			UHSIC_WAKE_VAL(12)
> +
> +#define PMC_UHSIC_FAKE			PMC_UTMIP_UHSIC_FAKE(0)
> +#define   UHSIC_FAKE_STROBE_VAL			BIT(12)
> +#define   UHSIC_FAKE_DATA_VAL			BIT(13)
> +#define   UHSIC_FAKE_STROBE_EN			BIT(14)
> +#define   UHSIC_FAKE_DATA_EN			BIT(15)
> +
> +#define PMC_UHSIC_SAVED_STATE		PMC_UTMIP_UHSIC_SAVED_STATE(0)
> +#define   UHSIC_MODE(_value)			(((_value) & 0x1) << 24)
> +#define   UHSIC_HS				UHSIC_MODE(0)
> +#define   UHSIC_RST				UHSIC_MODE(1)
> +
> +#define PMC_UHSIC_SLEEPWALK_CFG		PMC_UTMIP_UHSIC_SLEEPWALK_CFG(0)
> +#define   UHSIC_WAKE_WALK_EN			BIT(30)
> +#define   UHSIC_LINEVAL_WALK_EN			BIT(31)
> +
> +#define PMC_UHSIC_SLEEPWALK_P0		(0x210)
> +#define   UHSIC_DATA0_RPD_A			BIT(1)
> +#define   UHSIC_DATA0_RPU_B			BIT(11)
> +#define   UHSIC_DATA0_RPU_C			BIT(19)
> +#define   UHSIC_DATA0_RPU_D			BIT(27)
> +#define   UHSIC_STROBE_RPU_A			BIT(2)
> +#define   UHSIC_STROBE_RPD_B			BIT(8)
> +#define   UHSIC_STROBE_RPD_C			BIT(16)
> +#define   UHSIC_STROBE_RPD_D			BIT(24)
> +
>  struct tegra210_xusb_fuse_calibration {
>  	u32 hs_curr_level[4];
>  	u32 hs_term_range_adj;
>  	u32 rpd_ctrl;
>  };
>  
> +struct tegra210_xusb_padctl_context {
> +	u32 usb2_pad_mux;
> +	u32 usb2_port_cap;
> +	u32 ss_port_map;
> +	u32 usb3_pad_mux;
> +};
> +
>  struct tegra210_xusb_padctl {
>  	struct tegra_xusb_padctl base;
> +	struct regmap *regmap;
>  
>  	struct tegra210_xusb_fuse_calibration fuse;
> +	struct tegra210_xusb_padctl_context context;
>  };
>  
>  static inline struct tegra210_xusb_padctl *
> @@ -890,6 +1055,663 @@ static int tegra210_hsic_set_idle(struct tegra_xusb_padctl *padctl,
>  	return 0;
>  }
>  
> +static int tegra210_usb3_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
> +					      enum usb_device_speed speed)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	int port = tegra210_usb3_lane_map(lane);
> +	struct device *dev = padctl->dev;
> +	u32 value;
> +
> +	if (port < 0) {
> +		dev_err(dev, "invalid usb3 port number\n");
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(dev, "phy enable sleepwalk usb3 %d\n", port);
> +
> +	mutex_lock(&padctl->lock);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
> +	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(port);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
> +
> +	usleep_range(100, 200);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
> +	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(port);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
> +
> +	usleep_range(250, 350);
> +
> +	mutex_unlock(&padctl->lock);
> +
> +	return 0;
> +}
> +
> +static int tegra210_usb3_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	int port = tegra210_usb3_lane_map(lane);
> +	struct device *dev = padctl->dev;
> +	u32 value;
> +
> +	if (port < 0) {
> +		dev_err(dev, "invalid usb3 port number\n");
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(dev, "phy disable sleepwalk usb3 %d\n", port);
> +
> +	mutex_lock(&padctl->lock);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
> +	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(port);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
> +
> +	usleep_range(100, 200);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
> +	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(port);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
> +
> +	mutex_unlock(&padctl->lock);
> +
> +	return 0;
> +}
> +
> +static int tegra210_usb3_enable_phy_wake(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	int port = tegra210_usb3_lane_map(lane);
> +	struct device *dev = padctl->dev;
> +	u32 value;
> +
> +	if (port < 0) {
> +		dev_err(dev, "invalid usb3 port number\n");
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(dev, "phy enable wake usb3 %d\n", port);
> +
> +	mutex_lock(&padctl->lock);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value |= SS_PORT_WAKEUP_EVENT(port);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	usleep_range(10, 20);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value |= SS_PORT_WAKE_INTERRUPT_ENABLE(port);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	mutex_unlock(&padctl->lock);
> +
> +	return 0;
> +}
> +
> +static int tegra210_usb3_disable_phy_wake(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	int port = tegra210_usb3_lane_map(lane);
> +	struct device *dev = padctl->dev;
> +	u32 value;
> +
> +	if (port < 0) {
> +		dev_err(dev, "invalid usb3 port number\n");
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(dev, "phy disable wake usb3 %d\n", port);
> +
> +	mutex_lock(&padctl->lock);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value &= ~SS_PORT_WAKE_INTERRUPT_ENABLE(port);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	usleep_range(10, 20);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value |= SS_PORT_WAKEUP_EVENT(port);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	mutex_unlock(&padctl->lock);
> +
> +	return 0;
> +}
> +
> +static bool tegra210_usb3_phy_remote_wake_detected(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	int index = tegra210_usb3_lane_map(lane);
> +	u32 value;
> +
> +	if (index < 0)
> +		return false;
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	if ((value & SS_PORT_WAKE_INTERRUPT_ENABLE(index)) && (value & SS_PORT_WAKEUP_EVENT(index)))
> +		return true;
> +
> +	return false;
> +}
> +
> +static int tegra210_utmi_enable_phy_wake(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	unsigned int index = lane->index;
> +	struct device *dev = padctl->dev;
> +	u32 value;
> +
> +	dev_dbg(dev, "phy enable wake on usb2 %d\n", index);
> +
> +	mutex_lock(&padctl->lock);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value |= USB2_PORT_WAKEUP_EVENT(index);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	usleep_range(10, 20);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value |= USB2_PORT_WAKE_INTERRUPT_ENABLE(index);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	mutex_unlock(&padctl->lock);
> +
> +	return 0;
> +}
> +
> +static int tegra210_utmi_disable_phy_wake(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	unsigned int index = lane->index;
> +	struct device *dev = padctl->dev;
> +	u32 value;
> +
> +	dev_dbg(dev, "phy disable wake on usb2 %d\n", index);
> +
> +	mutex_lock(&padctl->lock);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value &= ~USB2_PORT_WAKE_INTERRUPT_ENABLE(index);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	usleep_range(10, 20);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value |= USB2_PORT_WAKEUP_EVENT(index);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	mutex_unlock(&padctl->lock);
> +
> +	return 0;
> +}
> +
> +static bool tegra210_utmi_phy_remote_wake_detected(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	unsigned int index = lane->index;
> +	u32 value;
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	if ((value & USB2_PORT_WAKE_INTERRUPT_ENABLE(index)) &&
> +	    (value & USB2_PORT_WAKEUP_EVENT(index)))
> +		return true;
> +
> +	return false;
> +}
> +
> +static int tegra210_hsic_enable_phy_wake(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	unsigned int index = lane->index;
> +	struct device *dev = padctl->dev;
> +	u32 value;
> +
> +	dev_dbg(dev, "phy enable wake on hsic %d\n", index);
> +
> +	mutex_lock(&padctl->lock);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value |= USB2_HSIC_PORT_WAKEUP_EVENT(index);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	usleep_range(10, 20);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value |= USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	mutex_unlock(&padctl->lock);
> +
> +	return 0;
> +}
> +
> +static int tegra210_hsic_disable_phy_wake(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	unsigned int index = lane->index;
> +	struct device *dev = padctl->dev;
> +	u32 value;
> +
> +	dev_dbg(dev, "phy disable wake on hsic %d\n", index);
> +
> +	mutex_lock(&padctl->lock);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value &= ~USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	usleep_range(10, 20);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	value &= ~ALL_WAKE_EVENTS;
> +	value |= USB2_HSIC_PORT_WAKEUP_EVENT(index);
> +	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
> +
> +	mutex_unlock(&padctl->lock);
> +
> +	return 0;
> +}
> +
> +static bool tegra210_hsic_phy_remote_wake_detected(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	unsigned int index = lane->index;
> +	u32 value;
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
> +	if ((value & USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index)) &&
> +	    (value & USB2_HSIC_PORT_WAKEUP_EVENT(index)))
> +		return true;
> +
> +	return false;
> +}
> +
> +#define padctl_pmc_readl(_priv, _offset)						\
> +({											\
> +	u32 value;									\
> +	WARN(regmap_read(_priv->regmap, _offset, &value), "read %s failed\n", #_offset);\
> +	value;										\
> +})
> +
> +#define padctl_pmc_writel(_priv, _value, _offset)					\
> +	WARN(regmap_write(_priv->regmap, _offset, _value), "write %s failed\n", #_offset)
> +
> +static int tegra210_pmc_utmi_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
> +						  enum usb_device_speed speed)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> +	struct device *dev = padctl->dev;
> +	unsigned int port = lane->index;
> +	u32 value, tctrl, pctrl, rpd_ctrl;
> +
> +	if (!priv->regmap)
> +		return -EOPNOTSUPP;
> +
> +	if (speed > USB_SPEED_HIGH)
> +		return -EINVAL;
> +
> +	dev_dbg(dev, "phy enable sleepwalk usb2 %d speed %d\n", port, speed);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
> +	tctrl = TCTRL_VALUE(value);
> +	pctrl = PCTRL_VALUE(value);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(port));
> +	rpd_ctrl = RPD_CTRL_VALUE(value);
> +
> +	/* ensure sleepwalk logic is disabled */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value &= ~UTMIP_MASTER_ENABLE(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	/* ensure sleepwalk logics are in low power mode */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG);
> +	value |= UTMIP_PWR(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG);
> +
> +	/* set debounce time */
> +	value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL);
> +	value &= ~UTMIP_LINE_DEB_CNT(~0);
> +	value |= UTMIP_LINE_DEB_CNT(0x1);
> +	padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL);
> +
> +	/* ensure fake events of sleepwalk logic are desiabled */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_FAKE(port));
> +	value &= ~(UTMIP_FAKE_USBOP_VAL(port) | UTMIP_FAKE_USBON_VAL(port) |
> +			UTMIP_FAKE_USBOP_EN(port) | UTMIP_FAKE_USBON_EN(port));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_FAKE(port));
> +
> +	/* ensure wake events of sleepwalk logic are not latched */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +	value &= ~UTMIP_LINE_WAKEUP_EN(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +
> +	/* disable wake event triggers of sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value &= ~UTMIP_WAKE_VAL(port, ~0);
> +	value |= UTMIP_WAKE_VAL_NONE(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	/* power down the line state detectors of the pad */
> +	value = padctl_pmc_readl(priv, PMC_USB_AO);
> +	value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
> +	padctl_pmc_writel(priv, value, PMC_USB_AO);
> +
> +	/* save state per speed */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SAVED_STATE(port));
> +	value &= ~SPEED(port, ~0);
> +	if (speed == USB_SPEED_HIGH)
> +		value |= UTMI_HS(port);
> +	else if (speed == USB_SPEED_FULL)
> +		value |= UTMI_FS(port);
> +	else if (speed == USB_SPEED_LOW)
> +		value |= UTMI_LS(port);
> +	else
> +		value |= UTMI_RST(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SAVED_STATE(port));
> +
> +	/* enable the trigger of the sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
> +	value |= UTMIP_LINEVAL_WALK_EN(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
> +
> +	/* reset the walk pointer and clear the alarm of the sleepwalk logic,
> +	 * as well as capture the configuration of the USB2.0 pad
> +	 */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
> +	value |= (UTMIP_CLR_WALK_PTR(port) | UTMIP_CLR_WAKE_ALARM(port) |
> +		UTMIP_CAP_CFG(port));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
> +
> +	/* program electrical parameters read from XUSB PADCTL */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_TERM_PAD_CFG);
> +	value &= ~(TCTRL_VAL(~0) | PCTRL_VAL(~0));
> +	value |= (TCTRL_VAL(tctrl) | PCTRL_VAL(pctrl));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_TERM_PAD_CFG);
> +
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_PAD_CFGX(port));
> +	value &= ~RPD_CTRL_PX(~0);
> +	value |= RPD_CTRL_PX(rpd_ctrl);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_PAD_CFGX(port));
> +
> +	/* setup the pull-ups and pull-downs of the signals during the four
> +	 * stages of sleepwalk.
> +	 * if device is connected, program sleepwalk logic to maintain a J and
> +	 * keep driving K upon seeing remote wake.
> +	 */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_SLEEPWALK_PX(port));
> +	value = (UTMIP_USBOP_RPD_A | UTMIP_USBOP_RPD_B | UTMIP_USBOP_RPD_C |
> +		UTMIP_USBOP_RPD_D);
> +	value |= (UTMIP_USBON_RPD_A | UTMIP_USBON_RPD_B | UTMIP_USBON_RPD_C |
> +		UTMIP_USBON_RPD_D);
> +	if (speed == USB_SPEED_UNKNOWN) {
> +		value |= (UTMIP_HIGHZ_A | UTMIP_HIGHZ_B | UTMIP_HIGHZ_C |
> +			UTMIP_HIGHZ_D);
> +	} else if ((speed == USB_SPEED_HIGH) || (speed == USB_SPEED_FULL)) {
> +		/* J state: D+/D- = high/low, K state: D+/D- = low/high */
> +		value |= UTMIP_HIGHZ_A;
> +		value |= UTMIP_AP_A;
> +		value |= (UTMIP_AN_B | UTMIP_AN_C | UTMIP_AN_D);
> +	} else if (speed == USB_SPEED_LOW) {
> +		/* J state: D+/D- = low/high, K state: D+/D- = high/low */
> +		value |= UTMIP_HIGHZ_A;
> +		value |= UTMIP_AN_A;
> +		value |= (UTMIP_AP_B | UTMIP_AP_C | UTMIP_AP_D);
> +	}
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_SLEEPWALK_PX(port));
> +
> +	/* power up the line state detectors of the pad */
> +	value = padctl_pmc_readl(priv, PMC_USB_AO);
> +	value &= ~(USBOP_VAL_PD(port) | USBON_VAL_PD(port));
> +	padctl_pmc_writel(priv, value, PMC_USB_AO);
> +
> +	usleep_range(50, 100);
> +
> +	/* switch the electric control of the USB2.0 pad to PMC */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value |= (UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) |
> +			UTMIP_TCTRL_USE_PMC(port));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG1);
> +	value |= (UTMIP_RPD_CTRL_USE_PMC_PX(port) |
> +			UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG1);
> +
> +	/* set the wake signaling trigger events */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value &= ~UTMIP_WAKE_VAL(port, ~0);
> +	value |= UTMIP_WAKE_VAL_ANY(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	/* enable the wake detection */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value |= UTMIP_MASTER_ENABLE(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +	value |= UTMIP_LINE_WAKEUP_EN(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +
> +	return 0;
> +}
> +
> +static int tegra210_pmc_utmi_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> +	struct device *dev = padctl->dev;
> +	unsigned int port = lane->index;
> +	u32 value;
> +
> +	if (!priv->regmap)
> +		return -EOPNOTSUPP;
> +
> +	dev_dbg(dev, "phy disable sleepwalk usb2 %d\n", port);
> +
> +	/* disable the wake detection */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value &= ~UTMIP_MASTER_ENABLE(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +	value &= ~UTMIP_LINE_WAKEUP_EN(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +
> +	/* switch the electric control of the USB2.0 pad to XUSB or USB2 */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value &= ~(UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) |
> +			UTMIP_TCTRL_USE_PMC(port));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG1);
> +	value &= ~(UTMIP_RPD_CTRL_USE_PMC_PX(port) |
> +			UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG1);
> +
> +	/* disable wake event triggers of sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value &= ~UTMIP_WAKE_VAL(port, ~0);
> +	value |= UTMIP_WAKE_VAL_NONE(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	/* power down the line state detectors of the port */
> +	value = padctl_pmc_readl(priv, PMC_USB_AO);
> +	value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
> +	padctl_pmc_writel(priv, value, PMC_USB_AO);
> +
> +	/* clear alarm of the sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
> +	value |= UTMIP_CLR_WAKE_ALARM(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
> +
> +	return 0;
> +}
> +
> +static int tegra210_pmc_hsic_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
> +						  enum usb_device_speed speed)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> +	struct device *dev = padctl->dev;
> +	unsigned int port = lane->index;
> +	u32 value;
> +
> +	if (!priv->regmap)
> +		return -EOPNOTSUPP;
> +
> +	dev_dbg(dev, "phy enable sleepwalk hsic %d\n", port);
> +
> +	/* ensure sleepwalk logic is disabled */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
> +	value &= ~UHSIC_MASTER_ENABLE;
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
> +
> +	/* ensure sleepwalk logics are in low power mode */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG);
> +	value |= UHSIC_PWR(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG);
> +
> +	/* set debounce time */
> +	value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL);
> +	value &= ~UHSIC_LINE_DEB_CNT(~0);
> +	value |= UHSIC_LINE_DEB_CNT(0x1);
> +	padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL);
> +
> +	/* ensure fake events of sleepwalk logic are desiabled */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_FAKE);
> +	value &= ~(UHSIC_FAKE_STROBE_VAL | UHSIC_FAKE_DATA_VAL |
> +			UHSIC_FAKE_STROBE_EN | UHSIC_FAKE_DATA_EN);
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_FAKE);
> +
> +	/* ensure wake events of sleepwalk logic are not latched */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +	value &= ~UHSIC_LINE_WAKEUP_EN;
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +
> +	/* disable wake event triggers of sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
> +	value &= ~UHSIC_WAKE_VAL(~0);
> +	value |= UHSIC_WAKE_VAL_NONE;
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
> +
> +	/* power down the line state detectors of the port */
> +	value = padctl_pmc_readl(priv, PMC_USB_AO);
> +	value |= (STROBE_VAL_PD(port) | DATA0_VAL_PD(port) | DATA1_VAL_PD);
> +	padctl_pmc_writel(priv, value, PMC_USB_AO);
> +
> +	/* save state, HSIC always comes up as HS */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_SAVED_STATE);
> +	value &= ~UHSIC_MODE(~0);
> +	value |= UHSIC_HS;
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_SAVED_STATE);
> +
> +	/* enable the trigger of the sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEPWALK_CFG);
> +	value |= (UHSIC_WAKE_WALK_EN | UHSIC_LINEVAL_WALK_EN);
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEPWALK_CFG);
> +
> +	/* reset the walk pointer and clear the alarm of the sleepwalk logic,
> +	 * as well as capture the configuration of the USB2.0 port
> +	 */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
> +	value |= (UHSIC_CLR_WALK_PTR | UHSIC_CLR_WAKE_ALARM);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
> +
> +	/* setup the pull-ups and pull-downs of the signals during the four
> +	 * stages of sleepwalk.
> +	 * maintain a HSIC IDLE and keep driving HSIC RESUME upon remote wake
> +	 */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEPWALK_P0);
> +	value = (UHSIC_DATA0_RPD_A | UHSIC_DATA0_RPU_B | UHSIC_DATA0_RPU_C |
> +		UHSIC_DATA0_RPU_D);
> +	value |= (UHSIC_STROBE_RPU_A | UHSIC_STROBE_RPD_B | UHSIC_STROBE_RPD_C |
> +		UHSIC_STROBE_RPD_D);
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEPWALK_P0);
> +
> +	/* power up the line state detectors of the port */
> +	value = padctl_pmc_readl(priv, PMC_USB_AO);
> +	value &= ~(STROBE_VAL_PD(port) | DATA0_VAL_PD(port) | DATA1_VAL_PD);
> +	padctl_pmc_writel(priv, value, PMC_USB_AO);
> +
> +	usleep_range(50, 100);
> +
> +	/* set the wake signaling trigger events */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
> +	value &= ~UHSIC_WAKE_VAL(~0);
> +	value |= UHSIC_WAKE_VAL_SD10;
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
> +
> +	/* enable the wake detection */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
> +	value |= UHSIC_MASTER_ENABLE;
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
> +
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +	value |= UHSIC_LINE_WAKEUP_EN;
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +
> +	return 0;
> +}
> +
> +static int tegra210_pmc_hsic_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> +	struct device *dev = padctl->dev;
> +	unsigned int port = lane->index;
> +	u32 value;
> +
> +	if (!priv->regmap)
> +		return -EOPNOTSUPP;
> +
> +	dev_dbg(dev, "phy disable sleepwalk hsic %d\n", port);
> +
> +	/* disable the wake detection */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
> +	value &= ~UHSIC_MASTER_ENABLE;
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
> +
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +	value &= ~UHSIC_LINE_WAKEUP_EN;
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +
> +	/* disable wake event triggers of sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
> +	value &= ~UHSIC_WAKE_VAL(~0);
> +	value |= UHSIC_WAKE_VAL_NONE;
> +	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
> +
> +	/* power down the line state detectors of the port */
> +	value = padctl_pmc_readl(priv, PMC_USB_AO);
> +	value |= (STROBE_VAL_PD(port) | DATA0_VAL_PD(port) | DATA1_VAL_PD);
> +	padctl_pmc_writel(priv, value, PMC_USB_AO);
> +
> +	/* clear alarm of the sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
> +	value |= UHSIC_CLR_WAKE_ALARM;
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
> +
> +	return 0;
> +}
> +
>  static int tegra210_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
>  					 unsigned int index, bool enable)
>  {
> @@ -986,6 +1808,11 @@ static void tegra210_usb2_lane_remove(struct tegra_xusb_lane *lane)
>  static const struct tegra_xusb_lane_ops tegra210_usb2_lane_ops = {
>  	.probe = tegra210_usb2_lane_probe,
>  	.remove = tegra210_usb2_lane_remove,
> +	.enable_phy_sleepwalk = tegra210_pmc_utmi_enable_phy_sleepwalk,
> +	.disable_phy_sleepwalk = tegra210_pmc_utmi_disable_phy_sleepwalk,
> +	.enable_phy_wake = tegra210_utmi_enable_phy_wake,
> +	.disable_phy_wake = tegra210_utmi_disable_phy_wake,
> +	.remote_wake_detected = tegra210_utmi_phy_remote_wake_detected,
>  };
>  
>  static int tegra210_usb2_phy_init(struct phy *phy)
> @@ -1449,6 +2276,11 @@ static void tegra210_hsic_lane_remove(struct tegra_xusb_lane *lane)
>  static const struct tegra_xusb_lane_ops tegra210_hsic_lane_ops = {
>  	.probe = tegra210_hsic_lane_probe,
>  	.remove = tegra210_hsic_lane_remove,
> +	.enable_phy_sleepwalk = tegra210_pmc_hsic_enable_phy_sleepwalk,
> +	.disable_phy_sleepwalk = tegra210_pmc_hsic_disable_phy_sleepwalk,
> +	.enable_phy_wake = tegra210_hsic_enable_phy_wake,
> +	.disable_phy_wake = tegra210_hsic_disable_phy_wake,
> +	.remote_wake_detected = tegra210_hsic_phy_remote_wake_detected,
>  };
>  
>  static int tegra210_hsic_phy_init(struct phy *phy)
> @@ -1879,6 +2711,11 @@ static const struct tegra_xusb_lane_ops tegra210_pcie_lane_ops = {
>  	.remove = tegra210_pcie_lane_remove,
>  	.iddq_enable = tegra210_uphy_lane_iddq_enable,
>  	.iddq_disable = tegra210_uphy_lane_iddq_disable,
> +	.enable_phy_sleepwalk = tegra210_usb3_enable_phy_sleepwalk,
> +	.disable_phy_sleepwalk = tegra210_usb3_disable_phy_sleepwalk,
> +	.enable_phy_wake = tegra210_usb3_enable_phy_wake,
> +	.disable_phy_wake = tegra210_usb3_disable_phy_wake,
> +	.remote_wake_detected = tegra210_usb3_phy_remote_wake_detected,
>  };
>  
>  static int tegra210_pcie_phy_init(struct phy *phy)
> @@ -2044,6 +2881,11 @@ static const struct tegra_xusb_lane_ops tegra210_sata_lane_ops = {
>  	.remove = tegra210_sata_lane_remove,
>  	.iddq_enable = tegra210_uphy_lane_iddq_enable,
>  	.iddq_disable = tegra210_uphy_lane_iddq_disable,
> +	.enable_phy_sleepwalk = tegra210_usb3_enable_phy_sleepwalk,
> +	.disable_phy_sleepwalk = tegra210_usb3_disable_phy_sleepwalk,
> +	.enable_phy_wake = tegra210_usb3_enable_phy_wake,
> +	.disable_phy_wake = tegra210_usb3_disable_phy_wake,
> +	.remote_wake_detected = tegra210_usb3_phy_remote_wake_detected,
>  };
>  
>  static int tegra210_sata_phy_init(struct phy *phy)
> @@ -2293,6 +3135,8 @@ tegra210_xusb_padctl_probe(struct device *dev,
>  			   const struct tegra_xusb_padctl_soc *soc)
>  {
>  	struct tegra210_xusb_padctl *padctl;
> +	struct device_node *np;
> +	struct platform_device *pdev;
>  	int err;
>  
>  	padctl = devm_kzalloc(dev, sizeof(*padctl), GFP_KERNEL);
> @@ -2306,6 +3150,26 @@ tegra210_xusb_padctl_probe(struct device *dev,
>  	if (err < 0)
>  		return ERR_PTR(err);
>  
> +	np = of_parse_phandle(dev->of_node, "nvidia,pmc", 0);
> +	if (!np) {
> +		dev_warn(dev, "nvidia,pmc property is missing\n");
> +		goto out;
> +	}
> +
> +	pdev = of_find_device_by_node(np);
> +	if (!pdev) {
> +		dev_warn(dev, "PMC device is not available\n");
> +		goto out;
> +	}
> +
> +	if (!device_is_bound(&pdev->dev))

This breaks arm64 allmodconfig:

ERROR: modpost: "device_is_bound" [drivers/phy/tegra/phy-tegra-xusb.ko] undefined!

https://github.com/ClangBuiltLinux/continuous-integration2/runs/2196101892?check_suite_focus=true

> +		return ERR_PTR(-EPROBE_DEFER);
> +
> +	padctl->regmap = dev_get_regmap(&pdev->dev, "usb_sleepwalk");
> +	if (!padctl->regmap)
> +		dev_info(dev, "pmc regmap is not available.\n");
> +
> +out:
>  	return &padctl->base;
>  }
>  
> @@ -2313,9 +3177,75 @@ static void tegra210_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
>  {
>  }
>  
> +static void tegra210_xusb_padctl_save(struct tegra_xusb_padctl *padctl)
> +{
> +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> +
> +	priv->context.usb2_pad_mux =
> +		padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
> +	priv->context.usb2_port_cap =
> +		padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
> +	priv->context.ss_port_map =
> +		padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
> +	priv->context.usb3_pad_mux =
> +		padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
> +}
> +
> +static void tegra210_xusb_padctl_restore(struct tegra_xusb_padctl *padctl)
> +{
> +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> +	struct tegra_xusb_lane *lane;
> +
> +	padctl_writel(padctl, priv->context.usb2_pad_mux,
> +		XUSB_PADCTL_USB2_PAD_MUX);
> +	padctl_writel(padctl, priv->context.usb2_port_cap,
> +		XUSB_PADCTL_USB2_PORT_CAP);
> +	padctl_writel(padctl, priv->context.ss_port_map,
> +		XUSB_PADCTL_SS_PORT_MAP);
> +
> +	list_for_each_entry(lane, &padctl->lanes, list) {
> +		if (lane->pad->ops->iddq_enable)
> +			tegra210_uphy_lane_iddq_enable(lane);
> +	}
> +
> +	padctl_writel(padctl, priv->context.usb3_pad_mux,
> +		XUSB_PADCTL_USB3_PAD_MUX);
> +
> +	list_for_each_entry(lane, &padctl->lanes, list) {
> +		if (lane->pad->ops->iddq_disable)
> +			tegra210_uphy_lane_iddq_disable(lane);
> +	}
> +}
> +
> +static int tegra210_xusb_padctl_suspend_noirq(struct tegra_xusb_padctl *padctl)
> +{
> +	mutex_lock(&padctl->lock);
> +
> +	tegra210_uphy_deinit(padctl);
> +
> +	tegra210_xusb_padctl_save(padctl);
> +
> +	mutex_unlock(&padctl->lock);
> +	return 0;
> +}
> +
> +static int tegra210_xusb_padctl_resume_noirq(struct tegra_xusb_padctl *padctl)
> +{
> +	mutex_lock(&padctl->lock);
> +
> +	tegra210_xusb_padctl_restore(padctl);
> +
> +	tegra210_uphy_init(padctl);
> +
> +	mutex_unlock(&padctl->lock);
> +	return 0;
> +}
> +
>  static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
>  	.probe = tegra210_xusb_padctl_probe,
>  	.remove = tegra210_xusb_padctl_remove,
> +	.suspend_noirq = tegra210_xusb_padctl_suspend_noirq,
> +	.resume_noirq = tegra210_xusb_padctl_resume_noirq,
>  	.usb3_set_lfps_detect = tegra210_usb3_set_lfps_detect,
>  	.hsic_set_idle = tegra210_hsic_set_idle,
>  	.vbus_override = tegra210_xusb_padctl_vbus_override,
> -- 
> 2.30.2
> 
> 
> -- 
> linux-phy mailing list
> linux-phy@lists.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy
Thierry Reding March 26, 2021, 12:44 p.m. UTC | #2
On Thu, Mar 25, 2021 at 01:26:16PM -0700, Nathan Chancellor wrote:
> On Thu, Mar 25, 2021 at 05:40:53PM +0100, Thierry Reding wrote:
[...]
> > @@ -2306,6 +3150,26 @@ tegra210_xusb_padctl_probe(struct device *dev,
> >  	if (err < 0)
> >  		return ERR_PTR(err);
> >  
> > +	np = of_parse_phandle(dev->of_node, "nvidia,pmc", 0);
> > +	if (!np) {
> > +		dev_warn(dev, "nvidia,pmc property is missing\n");
> > +		goto out;
> > +	}
> > +
> > +	pdev = of_find_device_by_node(np);
> > +	if (!pdev) {
> > +		dev_warn(dev, "PMC device is not available\n");
> > +		goto out;
> > +	}
> > +
> > +	if (!device_is_bound(&pdev->dev))
> 
> This breaks arm64 allmodconfig:
> 
> ERROR: modpost: "device_is_bound" [drivers/phy/tegra/phy-tegra-xusb.ko] undefined!
> 
> https://github.com/ClangBuiltLinux/continuous-integration2/runs/2196101892?check_suite_focus=true

Good catch. I replaced this with:

	if (!platform_get_drvdata(pdev))

which will work fine and is equivalent, at least in this particular
case.

Thanks,
Thierry
Vinod Koul April 1, 2021, 6:45 a.m. UTC | #3
On 25-03-21, 17:40, Thierry Reding wrote:

> +static int tegra210_usb3_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
> +					      enum usb_device_speed speed)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	int port = tegra210_usb3_lane_map(lane);
> +	struct device *dev = padctl->dev;
> +	u32 value;
> +
> +	if (port < 0) {
> +		dev_err(dev, "invalid usb3 port number\n");
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(dev, "phy enable sleepwalk usb3 %d\n", port);

Too much noise for my taste :)
(here and other places)

> +static int tegra210_pmc_utmi_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
> +						  enum usb_device_speed speed)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> +	struct device *dev = padctl->dev;
> +	unsigned int port = lane->index;
> +	u32 value, tctrl, pctrl, rpd_ctrl;
> +
> +	if (!priv->regmap)
> +		return -EOPNOTSUPP;
> +
> +	if (speed > USB_SPEED_HIGH)
> +		return -EINVAL;
> +
> +	dev_dbg(dev, "phy enable sleepwalk usb2 %d speed %d\n", port, speed);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
> +	tctrl = TCTRL_VALUE(value);
> +	pctrl = PCTRL_VALUE(value);
> +
> +	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(port));
> +	rpd_ctrl = RPD_CTRL_VALUE(value);
> +
> +	/* ensure sleepwalk logic is disabled */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value &= ~UTMIP_MASTER_ENABLE(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	/* ensure sleepwalk logics are in low power mode */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG);
> +	value |= UTMIP_PWR(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG);

We really should have a read_modify_write() helper.. quite repeat of
this here

> +
> +	/* set debounce time */
> +	value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL);
> +	value &= ~UTMIP_LINE_DEB_CNT(~0);
> +	value |= UTMIP_LINE_DEB_CNT(0x1);
> +	padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL);
> +
> +	/* ensure fake events of sleepwalk logic are desiabled */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_FAKE(port));
> +	value &= ~(UTMIP_FAKE_USBOP_VAL(port) | UTMIP_FAKE_USBON_VAL(port) |
> +			UTMIP_FAKE_USBOP_EN(port) | UTMIP_FAKE_USBON_EN(port));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_FAKE(port));
> +
> +	/* ensure wake events of sleepwalk logic are not latched */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +	value &= ~UTMIP_LINE_WAKEUP_EN(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> +
> +	/* disable wake event triggers of sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +	value &= ~UTMIP_WAKE_VAL(port, ~0);
> +	value |= UTMIP_WAKE_VAL_NONE(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> +
> +	/* power down the line state detectors of the pad */
> +	value = padctl_pmc_readl(priv, PMC_USB_AO);
> +	value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
> +	padctl_pmc_writel(priv, value, PMC_USB_AO);
> +
> +	/* save state per speed */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SAVED_STATE(port));
> +	value &= ~SPEED(port, ~0);
> +	if (speed == USB_SPEED_HIGH)
> +		value |= UTMI_HS(port);
> +	else if (speed == USB_SPEED_FULL)
> +		value |= UTMI_FS(port);
> +	else if (speed == USB_SPEED_LOW)
> +		value |= UTMI_LS(port);
> +	else
> +		value |= UTMI_RST(port);

This could look better with a switch statement

> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SAVED_STATE(port));
> +
> +	/* enable the trigger of the sleepwalk logic */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
> +	value |= UTMIP_LINEVAL_WALK_EN(port);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
> +
> +	/* reset the walk pointer and clear the alarm of the sleepwalk logic,
> +	 * as well as capture the configuration of the USB2.0 pad
> +	 */

/*
 * multi
 * line style please
 */

> +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
> +	value |= (UTMIP_CLR_WALK_PTR(port) | UTMIP_CLR_WAKE_ALARM(port) |
> +		UTMIP_CAP_CFG(port));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
> +
> +	/* program electrical parameters read from XUSB PADCTL */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_TERM_PAD_CFG);
> +	value &= ~(TCTRL_VAL(~0) | PCTRL_VAL(~0));
> +	value |= (TCTRL_VAL(tctrl) | PCTRL_VAL(pctrl));
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_TERM_PAD_CFG);
> +
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_PAD_CFGX(port));
> +	value &= ~RPD_CTRL_PX(~0);
> +	value |= RPD_CTRL_PX(rpd_ctrl);
> +	padctl_pmc_writel(priv, value, PMC_UTMIP_PAD_CFGX(port));
> +
> +	/* setup the pull-ups and pull-downs of the signals during the four
> +	 * stages of sleepwalk.
> +	 * if device is connected, program sleepwalk logic to maintain a J and
> +	 * keep driving K upon seeing remote wake.
> +	 */
> +	value = padctl_pmc_readl(priv, PMC_UTMIP_SLEEPWALK_PX(port));
> +	value = (UTMIP_USBOP_RPD_A | UTMIP_USBOP_RPD_B | UTMIP_USBOP_RPD_C |
> +		UTMIP_USBOP_RPD_D);
> +	value |= (UTMIP_USBON_RPD_A | UTMIP_USBON_RPD_B | UTMIP_USBON_RPD_C |
> +		UTMIP_USBON_RPD_D);
> +	if (speed == USB_SPEED_UNKNOWN) {
> +		value |= (UTMIP_HIGHZ_A | UTMIP_HIGHZ_B | UTMIP_HIGHZ_C |
> +			UTMIP_HIGHZ_D);
> +	} else if ((speed == USB_SPEED_HIGH) || (speed == USB_SPEED_FULL)) {
> +		/* J state: D+/D- = high/low, K state: D+/D- = low/high */
> +		value |= UTMIP_HIGHZ_A;
> +		value |= UTMIP_AP_A;
> +		value |= (UTMIP_AN_B | UTMIP_AN_C | UTMIP_AN_D);
> +	} else if (speed == USB_SPEED_LOW) {
> +		/* J state: D+/D- = low/high, K state: D+/D- = high/low */
> +		value |= UTMIP_HIGHZ_A;
> +		value |= UTMIP_AN_A;
> +		value |= (UTMIP_AP_B | UTMIP_AP_C | UTMIP_AP_D);
> +	}

no else? err case? Also this could use a switch too

> +static int tegra210_pmc_utmi_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
> +{
> +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> +	struct device *dev = padctl->dev;
> +	unsigned int port = lane->index;
> +	u32 value;
> +
> +	if (!priv->regmap)
> +		return -EOPNOTSUPP;

That should be an error like EIO as we always expect regmap to be set,
no an unsupported error right?
Thierry Reding April 1, 2021, 10:44 a.m. UTC | #4
On Thu, Apr 01, 2021 at 12:15:08PM +0530, Vinod Koul wrote:
> On 25-03-21, 17:40, Thierry Reding wrote:
> 
> > +static int tegra210_usb3_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
> > +					      enum usb_device_speed speed)
> > +{
> > +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> > +	int port = tegra210_usb3_lane_map(lane);
> > +	struct device *dev = padctl->dev;
> > +	u32 value;
> > +
> > +	if (port < 0) {
> > +		dev_err(dev, "invalid usb3 port number\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	dev_dbg(dev, "phy enable sleepwalk usb3 %d\n", port);
> 
> Too much noise for my taste :)
> (here and other places)

These are purely for debugging purposes. The idea being that they can be
quickly enabled by defining DEBUG. Otherwise if something ever goes
wrong in this code somebody will have to add this exact same code again
just to troubleshoot.

But if you insist I can remove this and similar other debug messages.

> > +static int tegra210_pmc_utmi_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
> > +						  enum usb_device_speed speed)
> > +{
> > +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> > +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> > +	struct device *dev = padctl->dev;
> > +	unsigned int port = lane->index;
> > +	u32 value, tctrl, pctrl, rpd_ctrl;
> > +
> > +	if (!priv->regmap)
> > +		return -EOPNOTSUPP;
> > +
> > +	if (speed > USB_SPEED_HIGH)
> > +		return -EINVAL;
> > +
> > +	dev_dbg(dev, "phy enable sleepwalk usb2 %d speed %d\n", port, speed);
> > +
> > +	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
> > +	tctrl = TCTRL_VALUE(value);
> > +	pctrl = PCTRL_VALUE(value);
> > +
> > +	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(port));
> > +	rpd_ctrl = RPD_CTRL_VALUE(value);
> > +
> > +	/* ensure sleepwalk logic is disabled */
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> > +	value &= ~UTMIP_MASTER_ENABLE(port);
> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> > +
> > +	/* ensure sleepwalk logics are in low power mode */
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG);
> > +	value |= UTMIP_PWR(port);
> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG);
> 
> We really should have a read_modify_write() helper.. quite repeat of
> this here

I actually tried this once a while back, but the resulting code didn't
look much better, in my opinion. In this particular case it might
actually work because what we modify is simple, but consider the case
of some of the other expressions where individual arguments to the
functions will become really long and then the code ends up very
unreadable.

One alternative that I had considered was to have a mix and use the
read/modify/write helper only where it wouldn't hurt readability, but
that is perhaps half of the time and it would make register accesses
completely inconsistent.

I agree that this looks like a bit of boilerplate, but on the other hand
it's consistent and it's also very trivial to follow.

> > +	/* set debounce time */
> > +	value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL);
> > +	value &= ~UTMIP_LINE_DEB_CNT(~0);
> > +	value |= UTMIP_LINE_DEB_CNT(0x1);
> > +	padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL);
> > +
> > +	/* ensure fake events of sleepwalk logic are desiabled */
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_FAKE(port));
> > +	value &= ~(UTMIP_FAKE_USBOP_VAL(port) | UTMIP_FAKE_USBON_VAL(port) |
> > +			UTMIP_FAKE_USBOP_EN(port) | UTMIP_FAKE_USBON_EN(port));
> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_FAKE(port));
> > +
> > +	/* ensure wake events of sleepwalk logic are not latched */
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> > +	value &= ~UTMIP_LINE_WAKEUP_EN(port);
> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
> > +
> > +	/* disable wake event triggers of sleepwalk logic */
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> > +	value &= ~UTMIP_WAKE_VAL(port, ~0);
> > +	value |= UTMIP_WAKE_VAL_NONE(port);
> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
> > +
> > +	/* power down the line state detectors of the pad */
> > +	value = padctl_pmc_readl(priv, PMC_USB_AO);
> > +	value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
> > +	padctl_pmc_writel(priv, value, PMC_USB_AO);
> > +
> > +	/* save state per speed */
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SAVED_STATE(port));
> > +	value &= ~SPEED(port, ~0);
> > +	if (speed == USB_SPEED_HIGH)
> > +		value |= UTMI_HS(port);
> > +	else if (speed == USB_SPEED_FULL)
> > +		value |= UTMI_FS(port);
> > +	else if (speed == USB_SPEED_LOW)
> > +		value |= UTMI_LS(port);
> > +	else
> > +		value |= UTMI_RST(port);
> 
> This could look better with a switch statement

Agreed, I've switched this to a switch statement.

> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SAVED_STATE(port));
> > +
> > +	/* enable the trigger of the sleepwalk logic */
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
> > +	value |= UTMIP_LINEVAL_WALK_EN(port);
> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
> > +
> > +	/* reset the walk pointer and clear the alarm of the sleepwalk logic,
> > +	 * as well as capture the configuration of the USB2.0 pad
> > +	 */
> 
> /*
>  * multi
>  * line style please
>  */

Done.

> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
> > +	value |= (UTMIP_CLR_WALK_PTR(port) | UTMIP_CLR_WAKE_ALARM(port) |
> > +		UTMIP_CAP_CFG(port));
> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
> > +
> > +	/* program electrical parameters read from XUSB PADCTL */
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_TERM_PAD_CFG);
> > +	value &= ~(TCTRL_VAL(~0) | PCTRL_VAL(~0));
> > +	value |= (TCTRL_VAL(tctrl) | PCTRL_VAL(pctrl));
> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_TERM_PAD_CFG);
> > +
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_PAD_CFGX(port));
> > +	value &= ~RPD_CTRL_PX(~0);
> > +	value |= RPD_CTRL_PX(rpd_ctrl);
> > +	padctl_pmc_writel(priv, value, PMC_UTMIP_PAD_CFGX(port));
> > +
> > +	/* setup the pull-ups and pull-downs of the signals during the four
> > +	 * stages of sleepwalk.
> > +	 * if device is connected, program sleepwalk logic to maintain a J and
> > +	 * keep driving K upon seeing remote wake.
> > +	 */
> > +	value = padctl_pmc_readl(priv, PMC_UTMIP_SLEEPWALK_PX(port));
> > +	value = (UTMIP_USBOP_RPD_A | UTMIP_USBOP_RPD_B | UTMIP_USBOP_RPD_C |
> > +		UTMIP_USBOP_RPD_D);
> > +	value |= (UTMIP_USBON_RPD_A | UTMIP_USBON_RPD_B | UTMIP_USBON_RPD_C |
> > +		UTMIP_USBON_RPD_D);
> > +	if (speed == USB_SPEED_UNKNOWN) {
> > +		value |= (UTMIP_HIGHZ_A | UTMIP_HIGHZ_B | UTMIP_HIGHZ_C |
> > +			UTMIP_HIGHZ_D);
> > +	} else if ((speed == USB_SPEED_HIGH) || (speed == USB_SPEED_FULL)) {
> > +		/* J state: D+/D- = high/low, K state: D+/D- = low/high */
> > +		value |= UTMIP_HIGHZ_A;
> > +		value |= UTMIP_AP_A;
> > +		value |= (UTMIP_AN_B | UTMIP_AN_C | UTMIP_AN_D);
> > +	} else if (speed == USB_SPEED_LOW) {
> > +		/* J state: D+/D- = low/high, K state: D+/D- = high/low */
> > +		value |= UTMIP_HIGHZ_A;
> > +		value |= UTMIP_AN_A;
> > +		value |= (UTMIP_AP_B | UTMIP_AP_C | UTMIP_AP_D);
> > +	}
> 
> no else? err case? Also this could use a switch too

There's no else or error case here because all other values have already
been rejected by the "speed > USB_SPEED_HIGH" check earlier in this
function. I agree that this looks better as a switch, though, so I've
changed to that.

> > +static int tegra210_pmc_utmi_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
> > +{
> > +	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
> > +	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
> > +	struct device *dev = padctl->dev;
> > +	unsigned int port = lane->index;
> > +	u32 value;
> > +
> > +	if (!priv->regmap)
> > +		return -EOPNOTSUPP;
> 
> That should be an error like EIO as we always expect regmap to be set,
> no an unsupported error right?

This is for backwards-compatibility with older device trees. Device
trees prior to this patch series don't have a reference to that regmap,
but the code should keep working with such device trees, otherwise USB
will be broken on newer kernel versions if you don't update the device
tree.

"unsupported" here means that this particular feature isn't supported
because the regmap is missing, so we can't reprogram the registers
needed to make this work.

FWIW, the ->probe() function will print a warning if the regmap is
absent, so in combination with this -EOPNOTSUPP that is hopefully going
to make this clearer to users.

Thierry
diff mbox series

Patch

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index b038d032fea1..8af73ba78ad7 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -16,6 +16,8 @@ 
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/of_platform.h>
 
 #include <soc/tegra/fuse.h>
 
@@ -52,6 +54,20 @@ 
 #define XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP(x, v) (((v) & 0x7) << ((x) * 5))
 #define XUSB_PADCTL_SS_PORT_MAP_PORT_DISABLED 0x7
 
+#define XUSB_PADCTL_ELPG_PROGRAM_0 0x20
+#define   USB2_PORT_WAKE_INTERRUPT_ENABLE(x)      BIT((x))
+#define   USB2_PORT_WAKEUP_EVENT(x)               BIT((x) + 7)
+#define   SS_PORT_WAKE_INTERRUPT_ENABLE(x)        BIT((x) + 14)
+#define   SS_PORT_WAKEUP_EVENT(x)                 BIT((x) + 21)
+#define   USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 28)
+#define   USB2_HSIC_PORT_WAKEUP_EVENT(x)          BIT((x) + 30)
+#define   ALL_WAKE_EVENTS ( \
+		USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) | \
+		USB2_PORT_WAKEUP_EVENT(2) | USB2_PORT_WAKEUP_EVENT(3) | \
+		SS_PORT_WAKEUP_EVENT(0) | SS_PORT_WAKEUP_EVENT(1) | \
+		SS_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(3) | \
+		USB2_HSIC_PORT_WAKEUP_EVENT(0))
+
 #define XUSB_PADCTL_ELPG_PROGRAM1 0x024
 #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN (1 << 31)
 #define XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY (1 << 30)
@@ -90,6 +106,8 @@ 
 #define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR (1 << 2)
 #define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DISC_OVRD (1 << 1)
 #define XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_CHRP_OVRD (1 << 0)
+#define   RPD_CTRL(x)                      (((x) & 0x1f) << 26)
+#define   RPD_CTRL_VALUE(x)                (((x) >> 26) & 0x1f)
 
 #define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284
 #define XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD (1 << 11)
@@ -108,6 +126,8 @@ 
 #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT 12
 #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK 0x7f
 #define XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL 0x1e
+#define   TCTRL_VALUE(x)                (((x) & 0x3f) >> 0)
+#define   PCTRL_VALUE(x)                (((x) >> 6) & 0x3f)
 
 #define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
 #define XUSB_PADCTL_HSIC_PAD_CTL0_RPU_STROBE (1 << 18)
@@ -251,16 +271,161 @@ 
 #define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING 8
 #define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_GROUNDED 0
 
+/* USB2 SLEEPWALK registers */
+#define UTMIP(_port, _offset1, _offset2) \
+		(((_port) <= 2) ? (_offset1) : (_offset2))
+
+#define PMC_UTMIP_UHSIC_SLEEP_CFG(x)	UTMIP(x, 0x1fc, 0x4d0)
+#define   UTMIP_MASTER_ENABLE(x)		UTMIP(x, BIT(8 * (x)), BIT(0))
+#define   UTMIP_FSLS_USE_PMC(x)			UTMIP(x, BIT(8 * (x) + 1), \
+							BIT(1))
+#define   UTMIP_PCTRL_USE_PMC(x)		UTMIP(x, BIT(8 * (x) + 2), \
+							BIT(2))
+#define   UTMIP_TCTRL_USE_PMC(x)		UTMIP(x, BIT(8 * (x) + 3), \
+							BIT(3))
+#define   UTMIP_WAKE_VAL(_port, _value)		(((_value) & 0xf) << \
+					(UTMIP(_port, 8 * (_port) + 4, 4)))
+#define   UTMIP_WAKE_VAL_NONE(_port)		UTMIP_WAKE_VAL(_port, 12)
+#define   UTMIP_WAKE_VAL_ANY(_port)		UTMIP_WAKE_VAL(_port, 15)
+
+#define PMC_UTMIP_UHSIC_SLEEP_CFG1	(0x4d0)
+#define   UTMIP_RPU_SWITC_LOW_USE_PMC_PX(x)	BIT((x) + 8)
+#define   UTMIP_RPD_CTRL_USE_PMC_PX(x)		BIT((x) + 16)
+
+#define PMC_UTMIP_MASTER_CONFIG		(0x274)
+#define   UTMIP_PWR(x)				UTMIP(x, BIT(x), BIT(4))
+#define   UHSIC_PWR(x)				BIT(3)
+
+#define PMC_USB_DEBOUNCE_DEL		(0xec)
+#define   DEBOUNCE_VAL(x)			(((x) & 0xffff) << 0)
+#define   UTMIP_LINE_DEB_CNT(x)			(((x) & 0xf) << 16)
+#define   UHSIC_LINE_DEB_CNT(x)			(((x) & 0xf) << 20)
+
+#define PMC_UTMIP_UHSIC_FAKE(x)		UTMIP(x, 0x218, 0x294)
+#define   UTMIP_FAKE_USBOP_VAL(x)		UTMIP(x, BIT(4 * (x)), BIT(8))
+#define   UTMIP_FAKE_USBON_VAL(x)		UTMIP(x, BIT(4 * (x) + 1), \
+							BIT(9))
+#define   UTMIP_FAKE_USBOP_EN(x)		UTMIP(x, BIT(4 * (x) + 2), \
+							BIT(10))
+#define   UTMIP_FAKE_USBON_EN(x)		UTMIP(x, BIT(4 * (x) + 3), \
+							BIT(11))
+
+#define PMC_UTMIP_UHSIC_SLEEPWALK_CFG(x)	UTMIP(x, 0x200, 0x288)
+#define   UTMIP_LINEVAL_WALK_EN(x)		UTMIP(x, BIT(8 * (x) + 7), \
+							BIT(15))
+
+#define PMC_USB_AO			(0xf0)
+#define   USBOP_VAL_PD(x)			UTMIP(x, BIT(4 * (x)), BIT(20))
+#define   USBON_VAL_PD(x)			UTMIP(x, BIT(4 * (x) + 1), \
+							BIT(21))
+#define   STROBE_VAL_PD(x)			BIT(12)
+#define   DATA0_VAL_PD(x)			BIT(13)
+#define   DATA1_VAL_PD				BIT(24)
+
+#define PMC_UTMIP_UHSIC_SAVED_STATE(x)	UTMIP(x, 0x1f0, 0x280)
+#define   SPEED(_port, _value)			(((_value) & 0x3) << \
+						(UTMIP(_port, 8 * (_port), 8)))
+#define   UTMI_HS(_port)			SPEED(_port, 0)
+#define   UTMI_FS(_port)			SPEED(_port, 1)
+#define   UTMI_LS(_port)			SPEED(_port, 2)
+#define   UTMI_RST(_port)			SPEED(_port, 3)
+
+#define PMC_UTMIP_UHSIC_TRIGGERS		(0x1ec)
+#define   UTMIP_CLR_WALK_PTR(x)			UTMIP(x, BIT(x), BIT(16))
+#define   UTMIP_CAP_CFG(x)			UTMIP(x, BIT((x) + 4), BIT(17))
+#define   UTMIP_CLR_WAKE_ALARM(x)		UTMIP(x, BIT((x) + 12), \
+							BIT(19))
+#define   UHSIC_CLR_WALK_PTR			BIT(3)
+#define   UHSIC_CLR_WAKE_ALARM			BIT(15)
+
+#define PMC_UTMIP_SLEEPWALK_PX(x)	UTMIP(x, 0x204 + (4 * (x)), \
+							0x4e0)
+/* phase A */
+#define   UTMIP_USBOP_RPD_A			BIT(0)
+#define   UTMIP_USBON_RPD_A			BIT(1)
+#define   UTMIP_AP_A				BIT(4)
+#define   UTMIP_AN_A				BIT(5)
+#define   UTMIP_HIGHZ_A				BIT(6)
+/* phase B */
+#define   UTMIP_USBOP_RPD_B			BIT(8)
+#define   UTMIP_USBON_RPD_B			BIT(9)
+#define   UTMIP_AP_B				BIT(12)
+#define   UTMIP_AN_B				BIT(13)
+#define   UTMIP_HIGHZ_B				BIT(14)
+/* phase C */
+#define   UTMIP_USBOP_RPD_C			BIT(16)
+#define   UTMIP_USBON_RPD_C			BIT(17)
+#define   UTMIP_AP_C				BIT(20)
+#define   UTMIP_AN_C				BIT(21)
+#define   UTMIP_HIGHZ_C				BIT(22)
+/* phase D */
+#define   UTMIP_USBOP_RPD_D			BIT(24)
+#define   UTMIP_USBON_RPD_D			BIT(25)
+#define   UTMIP_AP_D				BIT(28)
+#define   UTMIP_AN_D				BIT(29)
+#define   UTMIP_HIGHZ_D				BIT(30)
+
+#define PMC_UTMIP_UHSIC_LINE_WAKEUP	(0x26c)
+#define   UTMIP_LINE_WAKEUP_EN(x)		UTMIP(x, BIT(x), BIT(4))
+#define   UHSIC_LINE_WAKEUP_EN			BIT(3)
+
+#define PMC_UTMIP_TERM_PAD_CFG		(0x1f8)
+#define   PCTRL_VAL(x)				(((x) & 0x3f) << 1)
+#define   TCTRL_VAL(x)				(((x) & 0x3f) << 7)
+
+#define PMC_UTMIP_PAD_CFGX(x)		(0x4c0 + (4 * (x)))
+#define   RPD_CTRL_PX(x)			(((x) & 0x1f) << 22)
+
+#define PMC_UHSIC_SLEEP_CFG	PMC_UTMIP_UHSIC_SLEEP_CFG(0)
+#define   UHSIC_MASTER_ENABLE			BIT(24)
+#define   UHSIC_WAKE_VAL(_value)		(((_value) & 0xf) << 28)
+#define   UHSIC_WAKE_VAL_SD10			UHSIC_WAKE_VAL(2)
+#define   UHSIC_WAKE_VAL_NONE			UHSIC_WAKE_VAL(12)
+
+#define PMC_UHSIC_FAKE			PMC_UTMIP_UHSIC_FAKE(0)
+#define   UHSIC_FAKE_STROBE_VAL			BIT(12)
+#define   UHSIC_FAKE_DATA_VAL			BIT(13)
+#define   UHSIC_FAKE_STROBE_EN			BIT(14)
+#define   UHSIC_FAKE_DATA_EN			BIT(15)
+
+#define PMC_UHSIC_SAVED_STATE		PMC_UTMIP_UHSIC_SAVED_STATE(0)
+#define   UHSIC_MODE(_value)			(((_value) & 0x1) << 24)
+#define   UHSIC_HS				UHSIC_MODE(0)
+#define   UHSIC_RST				UHSIC_MODE(1)
+
+#define PMC_UHSIC_SLEEPWALK_CFG		PMC_UTMIP_UHSIC_SLEEPWALK_CFG(0)
+#define   UHSIC_WAKE_WALK_EN			BIT(30)
+#define   UHSIC_LINEVAL_WALK_EN			BIT(31)
+
+#define PMC_UHSIC_SLEEPWALK_P0		(0x210)
+#define   UHSIC_DATA0_RPD_A			BIT(1)
+#define   UHSIC_DATA0_RPU_B			BIT(11)
+#define   UHSIC_DATA0_RPU_C			BIT(19)
+#define   UHSIC_DATA0_RPU_D			BIT(27)
+#define   UHSIC_STROBE_RPU_A			BIT(2)
+#define   UHSIC_STROBE_RPD_B			BIT(8)
+#define   UHSIC_STROBE_RPD_C			BIT(16)
+#define   UHSIC_STROBE_RPD_D			BIT(24)
+
 struct tegra210_xusb_fuse_calibration {
 	u32 hs_curr_level[4];
 	u32 hs_term_range_adj;
 	u32 rpd_ctrl;
 };
 
+struct tegra210_xusb_padctl_context {
+	u32 usb2_pad_mux;
+	u32 usb2_port_cap;
+	u32 ss_port_map;
+	u32 usb3_pad_mux;
+};
+
 struct tegra210_xusb_padctl {
 	struct tegra_xusb_padctl base;
+	struct regmap *regmap;
 
 	struct tegra210_xusb_fuse_calibration fuse;
+	struct tegra210_xusb_padctl_context context;
 };
 
 static inline struct tegra210_xusb_padctl *
@@ -890,6 +1055,663 @@  static int tegra210_hsic_set_idle(struct tegra_xusb_padctl *padctl,
 	return 0;
 }
 
+static int tegra210_usb3_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
+					      enum usb_device_speed speed)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	int port = tegra210_usb3_lane_map(lane);
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	if (port < 0) {
+		dev_err(dev, "invalid usb3 port number\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "phy enable sleepwalk usb3 %d\n", port);
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(port);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	usleep_range(100, 200);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(port);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	usleep_range(250, 350);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static int tegra210_usb3_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	int port = tegra210_usb3_lane_map(lane);
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	if (port < 0) {
+		dev_err(dev, "invalid usb3 port number\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "phy disable sleepwalk usb3 %d\n", port);
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(port);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	usleep_range(100, 200);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
+	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN(port);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static int tegra210_usb3_enable_phy_wake(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	int port = tegra210_usb3_lane_map(lane);
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	if (port < 0) {
+		dev_err(dev, "invalid usb3 port number\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "phy enable wake usb3 %d\n", port);
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value |= SS_PORT_WAKEUP_EVENT(port);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	usleep_range(10, 20);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value |= SS_PORT_WAKE_INTERRUPT_ENABLE(port);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static int tegra210_usb3_disable_phy_wake(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	int port = tegra210_usb3_lane_map(lane);
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	if (port < 0) {
+		dev_err(dev, "invalid usb3 port number\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "phy disable wake usb3 %d\n", port);
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value &= ~SS_PORT_WAKE_INTERRUPT_ENABLE(port);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	usleep_range(10, 20);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value |= SS_PORT_WAKEUP_EVENT(port);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static bool tegra210_usb3_phy_remote_wake_detected(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	int index = tegra210_usb3_lane_map(lane);
+	u32 value;
+
+	if (index < 0)
+		return false;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	if ((value & SS_PORT_WAKE_INTERRUPT_ENABLE(index)) && (value & SS_PORT_WAKEUP_EVENT(index)))
+		return true;
+
+	return false;
+}
+
+static int tegra210_utmi_enable_phy_wake(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	dev_dbg(dev, "phy enable wake on usb2 %d\n", index);
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value |= USB2_PORT_WAKEUP_EVENT(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	usleep_range(10, 20);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value |= USB2_PORT_WAKE_INTERRUPT_ENABLE(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static int tegra210_utmi_disable_phy_wake(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	dev_dbg(dev, "phy disable wake on usb2 %d\n", index);
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value &= ~USB2_PORT_WAKE_INTERRUPT_ENABLE(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	usleep_range(10, 20);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value |= USB2_PORT_WAKEUP_EVENT(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static bool tegra210_utmi_phy_remote_wake_detected(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	u32 value;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	if ((value & USB2_PORT_WAKE_INTERRUPT_ENABLE(index)) &&
+	    (value & USB2_PORT_WAKEUP_EVENT(index)))
+		return true;
+
+	return false;
+}
+
+static int tegra210_hsic_enable_phy_wake(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	dev_dbg(dev, "phy enable wake on hsic %d\n", index);
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value |= USB2_HSIC_PORT_WAKEUP_EVENT(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	usleep_range(10, 20);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value |= USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static int tegra210_hsic_disable_phy_wake(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	struct device *dev = padctl->dev;
+	u32 value;
+
+	dev_dbg(dev, "phy disable wake on hsic %d\n", index);
+
+	mutex_lock(&padctl->lock);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value &= ~USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	usleep_range(10, 20);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	value &= ~ALL_WAKE_EVENTS;
+	value |= USB2_HSIC_PORT_WAKEUP_EVENT(index);
+	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_0);
+
+	mutex_unlock(&padctl->lock);
+
+	return 0;
+}
+
+static bool tegra210_hsic_phy_remote_wake_detected(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	u32 value;
+
+	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_0);
+	if ((value & USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(index)) &&
+	    (value & USB2_HSIC_PORT_WAKEUP_EVENT(index)))
+		return true;
+
+	return false;
+}
+
+#define padctl_pmc_readl(_priv, _offset)						\
+({											\
+	u32 value;									\
+	WARN(regmap_read(_priv->regmap, _offset, &value), "read %s failed\n", #_offset);\
+	value;										\
+})
+
+#define padctl_pmc_writel(_priv, _value, _offset)					\
+	WARN(regmap_write(_priv->regmap, _offset, _value), "write %s failed\n", #_offset)
+
+static int tegra210_pmc_utmi_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
+						  enum usb_device_speed speed)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
+	struct device *dev = padctl->dev;
+	unsigned int port = lane->index;
+	u32 value, tctrl, pctrl, rpd_ctrl;
+
+	if (!priv->regmap)
+		return -EOPNOTSUPP;
+
+	if (speed > USB_SPEED_HIGH)
+		return -EINVAL;
+
+	dev_dbg(dev, "phy enable sleepwalk usb2 %d speed %d\n", port, speed);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	tctrl = TCTRL_VALUE(value);
+	pctrl = PCTRL_VALUE(value);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(port));
+	rpd_ctrl = RPD_CTRL_VALUE(value);
+
+	/* ensure sleepwalk logic is disabled */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+	value &= ~UTMIP_MASTER_ENABLE(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+	/* ensure sleepwalk logics are in low power mode */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG);
+	value |= UTMIP_PWR(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG);
+
+	/* set debounce time */
+	value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL);
+	value &= ~UTMIP_LINE_DEB_CNT(~0);
+	value |= UTMIP_LINE_DEB_CNT(0x1);
+	padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL);
+
+	/* ensure fake events of sleepwalk logic are desiabled */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_FAKE(port));
+	value &= ~(UTMIP_FAKE_USBOP_VAL(port) | UTMIP_FAKE_USBON_VAL(port) |
+			UTMIP_FAKE_USBOP_EN(port) | UTMIP_FAKE_USBON_EN(port));
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_FAKE(port));
+
+	/* ensure wake events of sleepwalk logic are not latched */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+	value &= ~UTMIP_LINE_WAKEUP_EN(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+	/* disable wake event triggers of sleepwalk logic */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+	value &= ~UTMIP_WAKE_VAL(port, ~0);
+	value |= UTMIP_WAKE_VAL_NONE(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+	/* power down the line state detectors of the pad */
+	value = padctl_pmc_readl(priv, PMC_USB_AO);
+	value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
+	padctl_pmc_writel(priv, value, PMC_USB_AO);
+
+	/* save state per speed */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SAVED_STATE(port));
+	value &= ~SPEED(port, ~0);
+	if (speed == USB_SPEED_HIGH)
+		value |= UTMI_HS(port);
+	else if (speed == USB_SPEED_FULL)
+		value |= UTMI_FS(port);
+	else if (speed == USB_SPEED_LOW)
+		value |= UTMI_LS(port);
+	else
+		value |= UTMI_RST(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SAVED_STATE(port));
+
+	/* enable the trigger of the sleepwalk logic */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
+	value |= UTMIP_LINEVAL_WALK_EN(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
+
+	/* reset the walk pointer and clear the alarm of the sleepwalk logic,
+	 * as well as capture the configuration of the USB2.0 pad
+	 */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
+	value |= (UTMIP_CLR_WALK_PTR(port) | UTMIP_CLR_WAKE_ALARM(port) |
+		UTMIP_CAP_CFG(port));
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
+
+	/* program electrical parameters read from XUSB PADCTL */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_TERM_PAD_CFG);
+	value &= ~(TCTRL_VAL(~0) | PCTRL_VAL(~0));
+	value |= (TCTRL_VAL(tctrl) | PCTRL_VAL(pctrl));
+	padctl_pmc_writel(priv, value, PMC_UTMIP_TERM_PAD_CFG);
+
+	value = padctl_pmc_readl(priv, PMC_UTMIP_PAD_CFGX(port));
+	value &= ~RPD_CTRL_PX(~0);
+	value |= RPD_CTRL_PX(rpd_ctrl);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_PAD_CFGX(port));
+
+	/* setup the pull-ups and pull-downs of the signals during the four
+	 * stages of sleepwalk.
+	 * if device is connected, program sleepwalk logic to maintain a J and
+	 * keep driving K upon seeing remote wake.
+	 */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_SLEEPWALK_PX(port));
+	value = (UTMIP_USBOP_RPD_A | UTMIP_USBOP_RPD_B | UTMIP_USBOP_RPD_C |
+		UTMIP_USBOP_RPD_D);
+	value |= (UTMIP_USBON_RPD_A | UTMIP_USBON_RPD_B | UTMIP_USBON_RPD_C |
+		UTMIP_USBON_RPD_D);
+	if (speed == USB_SPEED_UNKNOWN) {
+		value |= (UTMIP_HIGHZ_A | UTMIP_HIGHZ_B | UTMIP_HIGHZ_C |
+			UTMIP_HIGHZ_D);
+	} else if ((speed == USB_SPEED_HIGH) || (speed == USB_SPEED_FULL)) {
+		/* J state: D+/D- = high/low, K state: D+/D- = low/high */
+		value |= UTMIP_HIGHZ_A;
+		value |= UTMIP_AP_A;
+		value |= (UTMIP_AN_B | UTMIP_AN_C | UTMIP_AN_D);
+	} else if (speed == USB_SPEED_LOW) {
+		/* J state: D+/D- = low/high, K state: D+/D- = high/low */
+		value |= UTMIP_HIGHZ_A;
+		value |= UTMIP_AN_A;
+		value |= (UTMIP_AP_B | UTMIP_AP_C | UTMIP_AP_D);
+	}
+	padctl_pmc_writel(priv, value, PMC_UTMIP_SLEEPWALK_PX(port));
+
+	/* power up the line state detectors of the pad */
+	value = padctl_pmc_readl(priv, PMC_USB_AO);
+	value &= ~(USBOP_VAL_PD(port) | USBON_VAL_PD(port));
+	padctl_pmc_writel(priv, value, PMC_USB_AO);
+
+	usleep_range(50, 100);
+
+	/* switch the electric control of the USB2.0 pad to PMC */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+	value |= (UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) |
+			UTMIP_TCTRL_USE_PMC(port));
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG1);
+	value |= (UTMIP_RPD_CTRL_USE_PMC_PX(port) |
+			UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port));
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG1);
+
+	/* set the wake signaling trigger events */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+	value &= ~UTMIP_WAKE_VAL(port, ~0);
+	value |= UTMIP_WAKE_VAL_ANY(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+	/* enable the wake detection */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+	value |= UTMIP_MASTER_ENABLE(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+	value |= UTMIP_LINE_WAKEUP_EN(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+	return 0;
+}
+
+static int tegra210_pmc_utmi_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
+	struct device *dev = padctl->dev;
+	unsigned int port = lane->index;
+	u32 value;
+
+	if (!priv->regmap)
+		return -EOPNOTSUPP;
+
+	dev_dbg(dev, "phy disable sleepwalk usb2 %d\n", port);
+
+	/* disable the wake detection */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+	value &= ~UTMIP_MASTER_ENABLE(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+	value &= ~UTMIP_LINE_WAKEUP_EN(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+	/* switch the electric control of the USB2.0 pad to XUSB or USB2 */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+	value &= ~(UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) |
+			UTMIP_TCTRL_USE_PMC(port));
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG1);
+	value &= ~(UTMIP_RPD_CTRL_USE_PMC_PX(port) |
+			UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port));
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG1);
+
+	/* disable wake event triggers of sleepwalk logic */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+	value &= ~UTMIP_WAKE_VAL(port, ~0);
+	value |= UTMIP_WAKE_VAL_NONE(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+	/* power down the line state detectors of the port */
+	value = padctl_pmc_readl(priv, PMC_USB_AO);
+	value |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
+	padctl_pmc_writel(priv, value, PMC_USB_AO);
+
+	/* clear alarm of the sleepwalk logic */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
+	value |= UTMIP_CLR_WAKE_ALARM(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
+
+	return 0;
+}
+
+static int tegra210_pmc_hsic_enable_phy_sleepwalk(struct tegra_xusb_lane *lane,
+						  enum usb_device_speed speed)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
+	struct device *dev = padctl->dev;
+	unsigned int port = lane->index;
+	u32 value;
+
+	if (!priv->regmap)
+		return -EOPNOTSUPP;
+
+	dev_dbg(dev, "phy enable sleepwalk hsic %d\n", port);
+
+	/* ensure sleepwalk logic is disabled */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
+	value &= ~UHSIC_MASTER_ENABLE;
+	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
+
+	/* ensure sleepwalk logics are in low power mode */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_MASTER_CONFIG);
+	value |= UHSIC_PWR(port);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_MASTER_CONFIG);
+
+	/* set debounce time */
+	value = padctl_pmc_readl(priv, PMC_USB_DEBOUNCE_DEL);
+	value &= ~UHSIC_LINE_DEB_CNT(~0);
+	value |= UHSIC_LINE_DEB_CNT(0x1);
+	padctl_pmc_writel(priv, value, PMC_USB_DEBOUNCE_DEL);
+
+	/* ensure fake events of sleepwalk logic are desiabled */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_FAKE);
+	value &= ~(UHSIC_FAKE_STROBE_VAL | UHSIC_FAKE_DATA_VAL |
+			UHSIC_FAKE_STROBE_EN | UHSIC_FAKE_DATA_EN);
+	padctl_pmc_writel(priv, value, PMC_UHSIC_FAKE);
+
+	/* ensure wake events of sleepwalk logic are not latched */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+	value &= ~UHSIC_LINE_WAKEUP_EN;
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+	/* disable wake event triggers of sleepwalk logic */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
+	value &= ~UHSIC_WAKE_VAL(~0);
+	value |= UHSIC_WAKE_VAL_NONE;
+	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
+
+	/* power down the line state detectors of the port */
+	value = padctl_pmc_readl(priv, PMC_USB_AO);
+	value |= (STROBE_VAL_PD(port) | DATA0_VAL_PD(port) | DATA1_VAL_PD);
+	padctl_pmc_writel(priv, value, PMC_USB_AO);
+
+	/* save state, HSIC always comes up as HS */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_SAVED_STATE);
+	value &= ~UHSIC_MODE(~0);
+	value |= UHSIC_HS;
+	padctl_pmc_writel(priv, value, PMC_UHSIC_SAVED_STATE);
+
+	/* enable the trigger of the sleepwalk logic */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEPWALK_CFG);
+	value |= (UHSIC_WAKE_WALK_EN | UHSIC_LINEVAL_WALK_EN);
+	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEPWALK_CFG);
+
+	/* reset the walk pointer and clear the alarm of the sleepwalk logic,
+	 * as well as capture the configuration of the USB2.0 port
+	 */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
+	value |= (UHSIC_CLR_WALK_PTR | UHSIC_CLR_WAKE_ALARM);
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
+
+	/* setup the pull-ups and pull-downs of the signals during the four
+	 * stages of sleepwalk.
+	 * maintain a HSIC IDLE and keep driving HSIC RESUME upon remote wake
+	 */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEPWALK_P0);
+	value = (UHSIC_DATA0_RPD_A | UHSIC_DATA0_RPU_B | UHSIC_DATA0_RPU_C |
+		UHSIC_DATA0_RPU_D);
+	value |= (UHSIC_STROBE_RPU_A | UHSIC_STROBE_RPD_B | UHSIC_STROBE_RPD_C |
+		UHSIC_STROBE_RPD_D);
+	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEPWALK_P0);
+
+	/* power up the line state detectors of the port */
+	value = padctl_pmc_readl(priv, PMC_USB_AO);
+	value &= ~(STROBE_VAL_PD(port) | DATA0_VAL_PD(port) | DATA1_VAL_PD);
+	padctl_pmc_writel(priv, value, PMC_USB_AO);
+
+	usleep_range(50, 100);
+
+	/* set the wake signaling trigger events */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
+	value &= ~UHSIC_WAKE_VAL(~0);
+	value |= UHSIC_WAKE_VAL_SD10;
+	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
+
+	/* enable the wake detection */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
+	value |= UHSIC_MASTER_ENABLE;
+	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
+
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+	value |= UHSIC_LINE_WAKEUP_EN;
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+	return 0;
+}
+
+static int tegra210_pmc_hsic_disable_phy_sleepwalk(struct tegra_xusb_lane *lane)
+{
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
+	struct device *dev = padctl->dev;
+	unsigned int port = lane->index;
+	u32 value;
+
+	if (!priv->regmap)
+		return -EOPNOTSUPP;
+
+	dev_dbg(dev, "phy disable sleepwalk hsic %d\n", port);
+
+	/* disable the wake detection */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
+	value &= ~UHSIC_MASTER_ENABLE;
+	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
+
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+	value &= ~UHSIC_LINE_WAKEUP_EN;
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+	/* disable wake event triggers of sleepwalk logic */
+	value = padctl_pmc_readl(priv, PMC_UHSIC_SLEEP_CFG);
+	value &= ~UHSIC_WAKE_VAL(~0);
+	value |= UHSIC_WAKE_VAL_NONE;
+	padctl_pmc_writel(priv, value, PMC_UHSIC_SLEEP_CFG);
+
+	/* power down the line state detectors of the port */
+	value = padctl_pmc_readl(priv, PMC_USB_AO);
+	value |= (STROBE_VAL_PD(port) | DATA0_VAL_PD(port) | DATA1_VAL_PD);
+	padctl_pmc_writel(priv, value, PMC_USB_AO);
+
+	/* clear alarm of the sleepwalk logic */
+	value = padctl_pmc_readl(priv, PMC_UTMIP_UHSIC_TRIGGERS);
+	value |= UHSIC_CLR_WAKE_ALARM;
+	padctl_pmc_writel(priv, value, PMC_UTMIP_UHSIC_TRIGGERS);
+
+	return 0;
+}
+
 static int tegra210_usb3_set_lfps_detect(struct tegra_xusb_padctl *padctl,
 					 unsigned int index, bool enable)
 {
@@ -986,6 +1808,11 @@  static void tegra210_usb2_lane_remove(struct tegra_xusb_lane *lane)
 static const struct tegra_xusb_lane_ops tegra210_usb2_lane_ops = {
 	.probe = tegra210_usb2_lane_probe,
 	.remove = tegra210_usb2_lane_remove,
+	.enable_phy_sleepwalk = tegra210_pmc_utmi_enable_phy_sleepwalk,
+	.disable_phy_sleepwalk = tegra210_pmc_utmi_disable_phy_sleepwalk,
+	.enable_phy_wake = tegra210_utmi_enable_phy_wake,
+	.disable_phy_wake = tegra210_utmi_disable_phy_wake,
+	.remote_wake_detected = tegra210_utmi_phy_remote_wake_detected,
 };
 
 static int tegra210_usb2_phy_init(struct phy *phy)
@@ -1449,6 +2276,11 @@  static void tegra210_hsic_lane_remove(struct tegra_xusb_lane *lane)
 static const struct tegra_xusb_lane_ops tegra210_hsic_lane_ops = {
 	.probe = tegra210_hsic_lane_probe,
 	.remove = tegra210_hsic_lane_remove,
+	.enable_phy_sleepwalk = tegra210_pmc_hsic_enable_phy_sleepwalk,
+	.disable_phy_sleepwalk = tegra210_pmc_hsic_disable_phy_sleepwalk,
+	.enable_phy_wake = tegra210_hsic_enable_phy_wake,
+	.disable_phy_wake = tegra210_hsic_disable_phy_wake,
+	.remote_wake_detected = tegra210_hsic_phy_remote_wake_detected,
 };
 
 static int tegra210_hsic_phy_init(struct phy *phy)
@@ -1879,6 +2711,11 @@  static const struct tegra_xusb_lane_ops tegra210_pcie_lane_ops = {
 	.remove = tegra210_pcie_lane_remove,
 	.iddq_enable = tegra210_uphy_lane_iddq_enable,
 	.iddq_disable = tegra210_uphy_lane_iddq_disable,
+	.enable_phy_sleepwalk = tegra210_usb3_enable_phy_sleepwalk,
+	.disable_phy_sleepwalk = tegra210_usb3_disable_phy_sleepwalk,
+	.enable_phy_wake = tegra210_usb3_enable_phy_wake,
+	.disable_phy_wake = tegra210_usb3_disable_phy_wake,
+	.remote_wake_detected = tegra210_usb3_phy_remote_wake_detected,
 };
 
 static int tegra210_pcie_phy_init(struct phy *phy)
@@ -2044,6 +2881,11 @@  static const struct tegra_xusb_lane_ops tegra210_sata_lane_ops = {
 	.remove = tegra210_sata_lane_remove,
 	.iddq_enable = tegra210_uphy_lane_iddq_enable,
 	.iddq_disable = tegra210_uphy_lane_iddq_disable,
+	.enable_phy_sleepwalk = tegra210_usb3_enable_phy_sleepwalk,
+	.disable_phy_sleepwalk = tegra210_usb3_disable_phy_sleepwalk,
+	.enable_phy_wake = tegra210_usb3_enable_phy_wake,
+	.disable_phy_wake = tegra210_usb3_disable_phy_wake,
+	.remote_wake_detected = tegra210_usb3_phy_remote_wake_detected,
 };
 
 static int tegra210_sata_phy_init(struct phy *phy)
@@ -2293,6 +3135,8 @@  tegra210_xusb_padctl_probe(struct device *dev,
 			   const struct tegra_xusb_padctl_soc *soc)
 {
 	struct tegra210_xusb_padctl *padctl;
+	struct device_node *np;
+	struct platform_device *pdev;
 	int err;
 
 	padctl = devm_kzalloc(dev, sizeof(*padctl), GFP_KERNEL);
@@ -2306,6 +3150,26 @@  tegra210_xusb_padctl_probe(struct device *dev,
 	if (err < 0)
 		return ERR_PTR(err);
 
+	np = of_parse_phandle(dev->of_node, "nvidia,pmc", 0);
+	if (!np) {
+		dev_warn(dev, "nvidia,pmc property is missing\n");
+		goto out;
+	}
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		dev_warn(dev, "PMC device is not available\n");
+		goto out;
+	}
+
+	if (!device_is_bound(&pdev->dev))
+		return ERR_PTR(-EPROBE_DEFER);
+
+	padctl->regmap = dev_get_regmap(&pdev->dev, "usb_sleepwalk");
+	if (!padctl->regmap)
+		dev_info(dev, "pmc regmap is not available.\n");
+
+out:
 	return &padctl->base;
 }
 
@@ -2313,9 +3177,75 @@  static void tegra210_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
 {
 }
 
+static void tegra210_xusb_padctl_save(struct tegra_xusb_padctl *padctl)
+{
+	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
+
+	priv->context.usb2_pad_mux =
+		padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
+	priv->context.usb2_port_cap =
+		padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
+	priv->context.ss_port_map =
+		padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
+	priv->context.usb3_pad_mux =
+		padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
+}
+
+static void tegra210_xusb_padctl_restore(struct tegra_xusb_padctl *padctl)
+{
+	struct tegra210_xusb_padctl *priv = to_tegra210_xusb_padctl(padctl);
+	struct tegra_xusb_lane *lane;
+
+	padctl_writel(padctl, priv->context.usb2_pad_mux,
+		XUSB_PADCTL_USB2_PAD_MUX);
+	padctl_writel(padctl, priv->context.usb2_port_cap,
+		XUSB_PADCTL_USB2_PORT_CAP);
+	padctl_writel(padctl, priv->context.ss_port_map,
+		XUSB_PADCTL_SS_PORT_MAP);
+
+	list_for_each_entry(lane, &padctl->lanes, list) {
+		if (lane->pad->ops->iddq_enable)
+			tegra210_uphy_lane_iddq_enable(lane);
+	}
+
+	padctl_writel(padctl, priv->context.usb3_pad_mux,
+		XUSB_PADCTL_USB3_PAD_MUX);
+
+	list_for_each_entry(lane, &padctl->lanes, list) {
+		if (lane->pad->ops->iddq_disable)
+			tegra210_uphy_lane_iddq_disable(lane);
+	}
+}
+
+static int tegra210_xusb_padctl_suspend_noirq(struct tegra_xusb_padctl *padctl)
+{
+	mutex_lock(&padctl->lock);
+
+	tegra210_uphy_deinit(padctl);
+
+	tegra210_xusb_padctl_save(padctl);
+
+	mutex_unlock(&padctl->lock);
+	return 0;
+}
+
+static int tegra210_xusb_padctl_resume_noirq(struct tegra_xusb_padctl *padctl)
+{
+	mutex_lock(&padctl->lock);
+
+	tegra210_xusb_padctl_restore(padctl);
+
+	tegra210_uphy_init(padctl);
+
+	mutex_unlock(&padctl->lock);
+	return 0;
+}
+
 static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
 	.probe = tegra210_xusb_padctl_probe,
 	.remove = tegra210_xusb_padctl_remove,
+	.suspend_noirq = tegra210_xusb_padctl_suspend_noirq,
+	.resume_noirq = tegra210_xusb_padctl_resume_noirq,
 	.usb3_set_lfps_detect = tegra210_usb3_set_lfps_detect,
 	.hsic_set_idle = tegra210_hsic_set_idle,
 	.vbus_override = tegra210_xusb_padctl_vbus_override,