diff mbox series

[v2,03/11] phy: renesas: Add RZ/G2L usb phy control driver

Message ID 20210621093943.12143-4-biju.das.jz@bp.renesas.com
State Superseded
Headers show
Series Add USB2.0 support. | expand

Commit Message

Biju Das June 21, 2021, 9:39 a.m. UTC
Add support for RZ/G2L USB PHY Control driver.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
v1->v2:
 * Incorporated vinod's review comments.
---
 drivers/phy/renesas/Kconfig                |   7 +
 drivers/phy/renesas/Makefile               |   1 +
 drivers/phy/renesas/phy-rzg2l-usbphyctrl.c | 157 +++++++++++++++++++++
 3 files changed, 165 insertions(+)
 create mode 100644 drivers/phy/renesas/phy-rzg2l-usbphyctrl.c
diff mbox series

Patch

diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
index 111bdcae775c..2184fba12255 100644
--- a/drivers/phy/renesas/Kconfig
+++ b/drivers/phy/renesas/Kconfig
@@ -32,3 +32,10 @@  config PHY_RCAR_GEN3_USB3
 	select GENERIC_PHY
 	help
 	  Support for USB 3.0 PHY found on Renesas R-Car generation 3 SoCs.
+
+config PHY_RZG2L_USBPHYCTRL
+	tristate "Renesas RZ/G2L USB PHY control driver"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Support for USB PHY Control found on RZ/G2L SoCs.
diff --git a/drivers/phy/renesas/Makefile b/drivers/phy/renesas/Makefile
index b599ff8a4349..62acc6bde5cb 100644
--- a/drivers/phy/renesas/Makefile
+++ b/drivers/phy/renesas/Makefile
@@ -3,3 +3,4 @@  obj-$(CONFIG_PHY_RCAR_GEN2)		+= phy-rcar-gen2.o
 obj-$(CONFIG_PHY_RCAR_GEN3_PCIE)	+= phy-rcar-gen3-pcie.o
 obj-$(CONFIG_PHY_RCAR_GEN3_USB2)	+= phy-rcar-gen3-usb2.o
 obj-$(CONFIG_PHY_RCAR_GEN3_USB3)	+= phy-rcar-gen3-usb3.o
+obj-$(CONFIG_PHY_RZG2L_USBPHYCTRL)	+= phy-rzg2l-usbphyctrl.o
diff --git a/drivers/phy/renesas/phy-rzg2l-usbphyctrl.c b/drivers/phy/renesas/phy-rzg2l-usbphyctrl.c
new file mode 100644
index 000000000000..f0e5555b99fe
--- /dev/null
+++ b/drivers/phy/renesas/phy-rzg2l-usbphyctrl.c
@@ -0,0 +1,157 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L USB PHY control driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define RESET			0x000
+
+#define SEL_PLLRESET		BIT(12)
+#define PLL_RESET		BIT(8)
+
+#define PHY_RESET_PORT2		(BIT(1) | BIT(5))
+#define PHY_RESET_PORT1		(BIT(0) | BIT(4))
+
+#define NUM_PORTS		2
+
+struct rzg2l_usbphycontrol_drv;
+
+struct rzg2l_phyctrl {
+	struct phy *phy;
+	struct rzg2l_usbphycontrol_drv *drv;
+	u32 phy_reset_port_mask;
+};
+
+struct rzg2l_usbphycontrol_drv {
+	void __iomem *base;
+	struct rzg2l_phyctrl phyctrl[NUM_PORTS];
+};
+
+static int rzg2l_usbphyctrl_init(struct phy *p)
+{
+	struct rzg2l_phyctrl *r = phy_get_drvdata(p);
+	struct rzg2l_usbphycontrol_drv *drv = r->drv;
+	void __iomem *base = drv->base;
+	u32 val = readl(base + RESET);
+
+	val |= SEL_PLLRESET;
+	val &= ~(PLL_RESET | r->phy_reset_port_mask);
+	writel(val, base + RESET);
+
+	return 0;
+}
+
+static int rzg2l_usbphyctrl_exit(struct phy *p)
+{
+	struct rzg2l_phyctrl *r = phy_get_drvdata(p);
+	struct rzg2l_usbphycontrol_drv *drv = r->drv;
+	void __iomem *base = drv->base;
+	u32 val = readl(base + RESET);
+
+	val |= r->phy_reset_port_mask;
+	if ((val & 0xFF) == (PHY_RESET_PORT1 | PHY_RESET_PORT2))
+		val |= PLL_RESET;
+	writel(val, base + RESET);
+	return 0;
+}
+
+static const struct phy_ops rzg2l_usbphyctrl_ops = {
+	.init		= rzg2l_usbphyctrl_init,
+	.exit		= rzg2l_usbphyctrl_exit,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id rzg2l_usbphyctrl_match_table[] = {
+	{ .compatible = "renesas,rzg2l-usbphyctrl" },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_usbphyctrl_match_table);
+
+static struct phy *rzg2l_usbphycontrol_xlate(struct device *dev,
+					     struct of_phandle_args *args)
+{
+	struct rzg2l_usbphycontrol_drv *drv;
+	struct rzg2l_phyctrl *r;
+
+	drv = dev_get_drvdata(dev);
+	if (!drv)
+		return ERR_PTR(-EINVAL);
+
+	if (args->args[0] >= NUM_PORTS)
+		return ERR_PTR(-ENODEV);
+
+	r = &drv->phyctrl[args->args[0]];
+
+	return r->phy;
+}
+
+static int rzg2l_usbphycontrol_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rzg2l_usbphycontrol_drv *drv;
+	struct phy_provider *provider;
+	u32 val;
+	int n;
+
+	drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	drv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(drv->base))
+		return PTR_ERR(drv->base);
+
+	for (n = 0; n < NUM_PORTS; n++) {
+		struct rzg2l_phyctrl *phy = &drv->phyctrl[n];
+
+		phy->phy = devm_phy_create(dev, NULL, &rzg2l_usbphyctrl_ops);
+		if (IS_ERR(phy->phy)) {
+			dev_err(dev, "Failed to create USBPHY Control\n");
+			return PTR_ERR(phy->phy);
+		}
+
+		if (n == 0)
+			phy->phy_reset_port_mask = PHY_RESET_PORT1;
+		else
+			phy->phy_reset_port_mask = PHY_RESET_PORT2;
+
+		phy->drv = drv;
+		phy_set_drvdata(phy->phy, phy);
+	};
+
+	provider = devm_of_phy_provider_register(dev, rzg2l_usbphycontrol_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "Failed to register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	dev_set_drvdata(dev, drv);
+
+	/* put pll and phy into reset state */
+	val = readl(drv->base + RESET);
+	val |= SEL_PLLRESET | PLL_RESET | PHY_RESET_PORT2 | PHY_RESET_PORT1;
+	writel(val, drv->base + RESET);
+
+	return 0;
+}
+
+static struct platform_driver rzg2l_usbphyctrl_driver = {
+	.driver = {
+		.name		= "rzg2l_usbphyctrl",
+		.of_match_table	= rzg2l_usbphyctrl_match_table,
+	},
+	.probe	= rzg2l_usbphycontrol_probe,
+};
+module_platform_driver(rzg2l_usbphyctrl_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas RZ/G2L USBPHYControl");
+MODULE_AUTHOR("biju.das.jz@bp.renesas.com>");